A comprehensive review on pulse protein fractionation and extraction: processes, functionality, and food applications.

The increasing world population requires the production of nutrient-rich foods. Protein is an essential macronutrient for healthy individuals. Interest in using plant proteins in foods has increased in recent years due to their sustainability and nutritional benefits. Dry and wet protein fractionation methods have been developed to increase protein yield, purity, and functional and nutritional qualities. This review explores the recent developments in pretreatments and fractionation processes used for producing pulse protein concentrates and isolates. Functionality differences between pulse proteins obtained from different fractionation methods and the use of fractionated pulse proteins in different food applications are also critically reviewed. Pretreatment methods improve the de-hulling efficiency of seeds prior to fractionation. Research on wet fractionation methods focuses on improving sustainability and functionality of proteins while studies on dry methods focus on increasing protein yield and purity. Hybrid methods produced fractionated proteins with higher yield and purity while also improving protein functionality and process sustainability. Dry and hybrid fractionated proteins have comparable or superior functionalities relative to wet fractionated proteins. Pulse protein ingredients are successfully incorporated into various food formulations with notable changes in their sensory properties. Future studies could focus on optimizing the fractionation process, improving protein concentrate palatability, and optimizing formulations using pulse proteins.

From wheat grain to flour: a review of potential sources of enteric pathogen contamination in wheat milled products.

The number of food safety issues linked to wheat milled products have increased in the past decade. These incidents were mainly caused by the contamination of wheat-based products by enteric pathogens. This manuscript is the first of a two-part review on the status of the food safety of wheat-based products. This manuscript focused on reviewing the available information on the potential pre-harvest and post-harvest sources of microbial contamination, and potential foodborne pathogens present in wheat-based products. Potential pre-harvest sources of microbial contamination in wheat included animal activity, water, soil, and manure. Improper grain storage practices, pest activity, and improperly cleaned and sanitized equipment are potential sources of post-harvest microbial contamination for wheat-based foods. Raw wheat flour products and flour-based products are potentially contaminated with enteric pathogens such as Shiga toxin-producing E. coli (STECs), and Salmonella at low concentrations. Wheat grains and their derived products (i.e., flours) are potential vehicles for foodborne illness in humans due to the presence of enteric pathogens. A more holistic approach is needed for assuring the food safety of wheat-based products in the farm-to-table continuum. Future developments in the wheat supply chain should also be aimed at addressing this emerging food safety threat.

Acidic water tempering and heat treatment, a hurdle approach to reduce wheat Salmonella load during tempering and its effects on flour quality.

The cultivation and processing of wheat render it susceptible to microbial contamination from varied sources. Hence, pathogens such as Salmonella can contaminate wheat grains, which poses a food safety risk in wheat-based products. This risk is displayed by the incidence of foodborne illness outbreaks linked to Salmonella-contaminated wheat flour and flour-based products. The purpose of this study was to assess the effectiveness of combining acidic water and heat treatment in reducing the Salmonella load of hard red spring (HRS) wheat grains during tempering. Effective treatments were then evaluated for their effects on wheat flour quality. Tempering with sodium bisulfate (SBS), lactic acid (LA), and citric acid (CA) at 15% w/v alone reduced (p < 0.001) wheat Salmonella load by 3.15, 3.23, and 2.91 log CFU/g, respectively. Heat treatment (55 °C) reduced (p < 0.001) wheat Salmonellaload by 4.1 log CFU/g after 24 h of tempering. Combining both tempering and heat treatments resulted in a greater reduction in Salmonella load as non-detectable levels (<2 log CFU/g) of Salmonella in the wheat grains were obtained after 12 h of tempering with LA (15%) + heat. A similar result were achieved for both SBS (15%) + heat and CA (15%) + heat treatments after 18 h of tempering. Applying the combined treatments in HRS wheat grains resulted in comparable wheat flour baking (volume, texture, and crumb structure) and physicochemical properties (rheology and composition) relative to the control (tempering with water alone). The results from this study has the potential to be utilized for developing more effective methods for improving the food safety of wheat flour against Salmonella contamination.

Low-drift-rate external cavity diode laser.

We present the design, construction, and simulation of a simple, low-cost external cavity diode laser with a measured free-running frequency drift rate of 1.4(1) MHz/h at 852 nm. This performance is achieved in a compact aluminum structure held inside an airtight, temperature-controlled enclosure. The high thermal conductivity of the laser cavity and the stable temperature environment inside the enclosure minimize the time-varying, spatial temperature gradients across the laser cavity. We present thermal finite element method simulations, which quantify the effects of temperature gradients, and suggest that the drift rate is likely limited by the laser-diode and piezo-aging.

Phage Biocontrol Effectively Reduces Contamination of Wheat with Shiga Toxin-producing Escherichia coli O121 and O26 Without Adverse Effects on Flour Quality.

Contamination of wheat flours with Shiga toxin-producing E. coli (STEC) is a concern for the milling industry. Milling-specific interventions are needed to address this food safety hazard. The objectives for this study were to determine the efficacy of bacteriophage treatment in reducing wheat STEC contamination during tempering, and assess its effects on flour milling and baking quality. Bacteriophage solutions were prepared by mixing sterile water with the bacteriophage treatment at the following levels: 1 × 106 (0.1%), 2.5 × 106 (0.25%), 5 × 106 (0.5%), 1 × 107 (1.0%), and 1 × 108 (10%) PFU/g wheat dosage. Sterile water (0%) was used as the control. Predried wheat grains were inoculated with STEC (O121 and O26) at 5.0 and 6.0 log CFU/g to restore its original moisture content followed by resting for 24 h. Inoculated grains were then tempered (16% moisture, 24 h) using the prepared bacteriophage solutions. Grains were sampled at 0.5, 1, 2, 6, 12, 18, and 24 h during tempering to determine STEC concentration. The effects of the phage solutions on the flour milling and baking quality were also tested. Tempering time, bacteriophage dose, and their interaction had significant effects on phage efficacy (P < 0.05), with better reductions observed at longer tempering times and higher bacteriophage doses. The use of phage solutions reduced (P < 0.05) wheat STEC concentration after tempering, with the 10% treatment (3.2 logs) achieving ahigher reduction than the 1% (2.4 logs) treatment under similar phage preparation. Phage tempering (including at the highest concentration examined, i.e., 10%) produced wheat flours with comparable quality to the control. Phage-treated wheat flour resulted in breads with finer crumb structure, and comparable texture compared to the control. Phage tempering is a viable intervention for wheat milling as it reduced STEC loads of wheat with no detrimental effects to flour milling and baking quality.

Mechanochemically accessing a challenging-to-synthesize depolymerizable polymer.

Polymers with low ceiling temperatures (Tc) are highly desirable as they can depolymerize under mild conditions, but they typically suffer from demanding synthetic conditions and poor stability. We envision that this challenge can be addressed by developing high-Tc polymers that can be converted into low-Tc polymers on demand. Here, we demonstrate the mechanochemical generation of a low-Tc polymer, poly(2,5-dihydrofuran) (PDHF), from an unsaturated polyether that contains cyclobutane-fused THF in each repeat unit. Upon mechanically induced cycloreversion of cyclobutane, each repeat unit generates three repeat units of PDHF. The resulting PDHF completely depolymerizes into 2,5-dihydrofuran in the presence of a ruthenium catalyst. The mechanochemical generation of the otherwise difficult-to-synthesize PDHF highlights the power of polymer mechanochemistry in accessing elusive structures. The concept of mechanochemically regulating the Tc of polymers can be applied to develop next-generation sustainable plastics.

Significance of Sodium Bisulfate (SBS) Tempering in Reducing the Escherichia coli O121 and O26 Load of Wheat and Its Effects on Wheat Flour Quality.

The occurrence of recalls involving pathogenic Escherichia coli-contaminated wheat flours show the need for incorporating antimicrobial interventions in wheat milling. The objectives of this study were to assess the efficacy of sodium bisulfate (SBS) tempering in reducing E. coli O121 (ATCC 2219) and O26 (ATCC 2196) wheat load and to evaluate the impact of effective (≥3.0 log reductions) SBS treatments on wheat flour quality. Wheat grains were inoculated with E. coli (~6 log CFU/g) and tempered (17% moisture, 24 h) using the following SBS concentrations (%wheat basis): 0, 0.5, 0.75, 1.0, 1.25, and 1.5% SBS. Reductions in E. coli O121 and O26 wheat load at different time intervals (0.5, 2, 6, 12, 18, and 24 h) during tempering were evaluated. The addition of SBS during tempering resulted in E. coli (O121 and O26) log reductions of 2.0 (0.5% SBS) to >4.0 logs (1.5% SBS) (p ≤ 0.05). SBS tempering (1.25 and 1.5% SBS) produced acidic wheat flours (pH = 4.51-4.60) but had comparable wheat flour properties in terms of composition, dough, and bread-making properties relative to the control (0% SBS). SBS tempering reduced the E. coli O121 and O26 load of wheat after tempering with minimal effects on wheat flour quality.