Analyzing multiple acoustic diffraction over a wide barrier using equivalent knife-edge geometries and Babinet's principle (L).

We present a new method for the calculation of the multiple acoustic diffraction caused by the presence of a wide barrier. Our solution decomposes the initial scenario into an equivalent sum of geometries that only consider knife-edges. Then, by applying Babinet's principle, the total acoustic field that reaches the receiving point, which can be located at an arbitrary position, can be calculated via the uniform theory of diffraction. This method is mathematically less complex and computationally more efficient than most existing techniques. The results are validated (with and without ground reflection) by the solid agreement obtained with other solutions that solve the problem by considering the wide barrier as such, with our proposed method yielding a lower computational time (except against semi-empirical formulations) and better accuracy when compared with measurements. The presented solution can be applied in urban environments where the impact of traffic noise on residential buildings located along roads or highways needs to be evaluated, as well as in scenarios in which the insertion loss caused by a rectangular obstacle, such as a noise barrier, is to be calculated.

Constrained IoT-Based Machine Learning for Accurate Glycemia Forecasting in Type 1 Diabetes Patients.

Individuals with diabetes mellitus type 1 (DM1) tend to check their blood sugar levels multiple times daily and utilize this information to predict their future glycemic levels. Based on these predictions, patients decide on the best approach to regulate their glucose levels with considerations such as insulin dosage and other related factors. Nevertheless, modern developments in Internet of Things (IoT) technology and innovative biomedical sensors have enabled the constant gathering of glucose level data using continuous glucose monitoring (CGM) in addition to other biomedical signals. With the use of machine learning (ML) algorithms, glycemic level patterns can be modeled, enabling accurate forecasting of this variable. Constrained devices have limited computational power, making it challenging to run complex machine learning algorithms directly on these devices. However, by leveraging edge computing, using lightweight machine learning algorithms, and performing preprocessing and feature extraction, it is possible to run machine learning algorithms on constrained devices despite these limitations. In this paper we test the burdens of some constrained IoT devices, probing that it is feasible to locally predict glycemia using a smartphone, up to 45 min in advance and with acceptable accuracy using random forest.

Applications of Artificial Intelligence, Machine Learning, Big Data and the Internet of Things to the COVID-19 Pandemic: A Scientometric Review Using Text Mining.

The COVID-19 pandemic has wreaked havoc in every country in the world, with serious health-related, economic, and social consequences. Since its outbreak in March 2020, many researchers from different fields have joined forces to provide a wide range of solutions, and the support for this work from artificial intelligence (AI) and other emerging concepts linked to intelligent data analysis has been decisive. The enormous amount of research and the high number of publications during this period makes it difficult to obtain an overall view of the different applications of AI to the management of COVID-19 and an understanding of how research in this field has been evolving. Therefore, in this paper, we carry out a scientometric analysis of this area supported by text mining, including a review of 18,955 publications related to AI and COVID-19 from the Scopus database from March 2020 to June 2021 inclusive. For this purpose, we used VOSviewer software, which was developed by researchers at Leiden University in the Netherlands. This allowed us to examine the exponential growth in research on this issue and its distribution by country, and to highlight the clear hegemony of the United States (USA) and China in this respect. We used an automatic process to extract topics of research interest and observed that the most important current lines of research focused on patient-based solutions. We also identified the most relevant journals in terms of the COVID-19 pandemic, demonstrated the growing value of open-access publication, and highlighted the most influential authors by means of an analysis of citations and co-citations. This study provides an overview of the current status of research on the application of AI to the pandemic.

On Differential Imaging Using Electromagnetic Simulation for Vehicular Antenna Signature Analysis.

The current trend in vehicles is to integrate a wide number of antennae and sensors operating at a variety of frequencies for sensing and communications. The integration of these antennae and sensors in the vehicle platform is complex because of the way in which the antenna radiation patterns interact with the vehicle structure and other antennae/sensors. Consequently, there is a need to study the radiation pattern of each antenna or, alternatively, the currents induced on the surface of the vehicle to optimize the integration of multiple antennae. The novel concept of differential imaging represents one method by which it is possible to obtain the surface current distribution without introducing any perturbing probe. The aim of this study was to develop and confirm the assumptions that underpin differential imaging by means of full-wave electromagnetic simulation, thereby providing additional verification of the concept. The simulation environment and parameters were selected to replicate the conditions in which real measurements were taken in previous studies. The simulations were performed using Ansys HFSS simulation software. The results confirm that the approximations are valid, and the differential currents are representative of the induced surface currents generated by a monopole positioned on the top of a vehicle.

Terahertz Frequency-Scaled Differential Imaging for Sub-6 GHz Vehicular Antenna Signature Analysis.

The next generation of connected and autonomous vehicles will be equipped with high numbers of antennas operating in a wide frequency range for communications and environment sensing. The study of 3D spatial angular responses and the radiation patterns modified by vehicular structure will allow for better integration of the associated communication and sensing antennas. The use of near-field monostatic focusing, applied with frequency-dimension scale translation and differential imaging, offers a novel imaging application. The objective of this paper is to theoretically and experimentally study the method of obtaining currents produced by an antenna radiating on top of a vehicular platform using differential imaging. The experimental part of the study focuses on measuring a scaled target using an imaging system operating in a terahertz band-from 220 to 330 GHz-that matches a 5G frequency band according to frequency-dimension scale translation. The results show that the induced currents are properly estimated using this methodology, and that the influence of the bandwidth is assessed.

On the Better Performance of Pianists with Motor Imagery-Based Brain-Computer Interface Systems.

Motor imagery (MI)-based brain-computer interface (BCI) systems detect electrical brain activity patterns through electroencephalogram (EEG) signals to forecast user intention while performing movement imagination tasks. As the microscopic details of individuals' brains are directly shaped by their rich experiences, musicians can develop certain neurological characteristics, such as improved brain plasticity, following extensive musical training. Specifically, the advanced bimanual motor coordination that pianists exhibit means that they may interact more effectively with BCI systems than their non-musically trained counterparts; this could lead to personalized BCI strategies according to the users' previously detected skills. This work assessed the performance of pianists as they interacted with an MI-based BCI system and compared it with that of a control group. The Common Spatial Patterns (CSP) and Linear Discriminant Analysis (LDA) machine learning algorithms were applied to the EEG signals for feature extraction and classification, respectively. The results revealed that the pianists achieved a higher level of BCI control by means of MI during the final trial (74.69%) compared to the control group (63.13%). The outcome indicates that musical training could enhance the performance of individuals using BCI systems.

Linear and Circular UWB Millimeter-Wave and Terahertz Monostatic Near-Field Synthetic Aperture Imaging.

Millimeter-wave and terahertz frequencies offer unique characteristics to simultaneously obtain good spatial resolution and penetrability. In this paper, a robust near-field monostatic focusing technique is presented and successfully applied for the internal imaging of different penetrable geometries. These geometries and environments are related to the growing need to furnish new vehicles with radar-sensing devices that can visualize their surroundings in a clear and robust way. Sub-millimeter-wave radar sensing offers enhanced capabilities in providing information with a high level of accuracy and quality, even under adverse weather conditions. The aim of this paper was to research the capability of this radar system for imaging purposes from an analytical and experimental point of view. Two sets of measurements, using reference targets, were performed in the W band at 100 GHz (75 to 110 GHz) and terahertz band at 300 GHz (220 to 330 GHz). The results show spatial resolutions of millimeters in both the range (longitudinal) and the cross-range (transversal) dimensions for the two different imaging geometries in terms of the location of the transmitter and receiver (frontal or lateral views). The imaging quality in terms of spatial accuracy and target material parameter was investigated and optimized.

Utility of Big Data in Predicting Short-Term Blood Glucose Levels in Type 1 Diabetes Mellitus Through Machine Learning Techniques.

Machine learning techniques combined with wearable electronics can deliver accurate short-term blood glucose level prediction models. These models can learn personalized glucose-insulin dynamics based on the sensor data collected by monitoring several aspects of the physiological condition and daily activity of an individual. Until now, the prevalent approach for developing data-driven prediction models was to collect as much data as possible to help physicians and patients optimally adjust therapy. The objective of this work was to investigate the minimum data variety, volume, and velocity required to create accurate person-centric short-term prediction models. We developed a series of these models using different machine learning time series forecasting techniques suitable for execution within a wearable processor. We conducted an extensive passive patient monitoring study in real-world conditions to build an appropriate data set. The study involved a subset of type 1 diabetic subjects wearing a flash glucose monitoring system. We comparatively and quantitatively evaluated the performance of the developed data-driven prediction models and the corresponding machine learning techniques. Our results indicate that very accurate short-term prediction can be achieved by only monitoring interstitial glucose data over a very short time period and using a low sampling frequency. The models developed can predict glucose levels within a 15-min horizon with an average error as low as 15.43 mg/dL using only 24 historic values collected within a period of sex hours, and by increasing the sampling frequency to include 72 values, the average error is reduced to 10.15 mg/dL. Our prediction models are suitable for execution within a wearable device, requiring the minimum hardware requirements while at simultaneously achieving very high prediction accuracy.

On the Possibility of Predicting Glycaemia 'On the Fly' with Constrained IoT Devices in Type 1 Diabetes Mellitus Patients.

Type 1 Diabetes Mellitus (DM1) patients are used to checking their blood glucose levels several times per day through finger sticks and, by subjectively handling this information, to try to predict their future glycaemia in order to choose a proper strategy to keep their glucose levels under control, in terms of insulin dosages and other factors. However, recent Internet of Things (IoT) devices and novel biosensors have allowed the continuous collection of the value of the glucose level by means of Continuous Glucose Monitoring (CGM) so that, with the proper Machine Learning (ML) algorithms, glucose evolution can be modeled, thus permitting a forecast of this variable. On the other hand, glycaemia dynamics require that such a model be user-centric and should be recalculated continuously in order to reflect the exact status of the patient, i.e., an 'on-the-fly' approach. In order to avoid, for example, the risk of being disconnected from the Internet, it would be ideal if this task could be performed locally in constrained devices like smartphones, but this would only be feasible if the execution times were fast enough. Therefore, in order to analyze if such a possibility is viable or not, an extensive, passive, CGM study has been carried out with 25 DM1 patients in order to build a solid dataset. Then, some well-known univariate algorithms have been executed in a desktop computer (as a reference) and two constrained devices: a smartphone and a Raspberry Pi, taking into account only past glycaemia data to forecast glucose levels. The results indicate that it is possible to forecast, in a smartphone, a 15-min horizon with a Root Mean Squared Error (RMSE) of 11.65 mg/dL in just 16.15 s, employing a 10-min sampling of the past 6 h of data and the Random Forest algorithm. With the Raspberry Pi, the computational effort increases to 56.49 s assuming the previously mentioned parameters, but this can be improved to 34.89 s if Support Vector Machines are applied, achieving in this case an RMSE of 19.90 mg/dL. Thus, this paper concludes that local on-the-fly forecasting of glycaemia would be affordable with constrained devices.

Variables to Be Monitored via Biomedical Sensors for Complete Type 1 Diabetes Mellitus Management: An Extension of the "On-Board" Concept.

Type 1 diabetes mellitus (DM1) is a growing disease, and a deep understanding of the patient is required to prescribe the most appropriate treatment, adjusted to the patient's habits and characteristics. Before now, knowledge regarding each patient has been incomplete, discontinuous, and partial. However, the recent development of continuous glucose monitoring (CGM) and new biomedical sensors/gadgets, based on automatic continuous monitoring, offers a new perspective on DM1 management, since these innovative devices allow the collection of 24-hour biomedical data in addition to blood glucose levels. With this, it is possible to deeply characterize a diabetic person, offering a better understanding of his or her illness evolution, and, going further, develop new strategies to manage DM1. This new and global monitoring makes it possible to extend the "on-board" concept to other features. This well-known approach to the processing of variable "insulin" describes some inertias and aggregated/remaining effects. In this work, such analysis is carried out along with a thorough study of the significant variables to be taken into account/monitored-and how to arrange them-for a deep characterization of diabetic patients. Lastly, we present a case study evaluating the experience of the continuous and comprehensive monitoring of a diabetic patient, concluding that the huge potential of this new perspective could provide an acute insight into the patient's status and extract the maximum amount of knowledge, thus improving the DM1 management system in order to be fully functional.

Uniform theory of diffraction (UTD)-based solution for sound diffraction caused by an array of obstacles.

A formulation based on the uniform theory of diffraction (UTD) for the analysis of the multiple-diffraction of a spherical sound wave caused by a series of wedges or knife-edges is hereby presented. The receiver location has to be considered at the same height as the preceding obstacles and at the same inter-obstacle distance from the last wedge. The solution, which is based on a UTD-physical optics formulation for radio-wave multiple-diffraction and has been validated through comparison with a geometrical theory of diffraction acoustic model, is computationally more efficient than other existing methods thanks to the fact that only single diffractions are involved in the calculations (high-order diffraction terms are not considered in the diffraction coefficients), thus allowing for the consideration of a great number of obstacles. In such a way, the proposed solution overcomes the limitations of previous works when multiple acoustic diffraction caused by an array of elements of equal height is to be analyzed. Therefore, the results can be applied in the study of sound propagation in scenarios where multiple-diffraction over a series of edges of equal height and periodical spacing has to be considered, such as the typical audience seating of a concert hall.