Tailored Design of a Water-Based Nanoreactor Technology for Producing Processable Sub-40 Nm 3D COF Nanoparticles at Atmospheric Conditions.

Covalent organic frameworks (COFs) are crystalline materials with intrinsic porosity that offer a wide range of potential applications spanning diverse fields. Yet, the main goal in the COF research area is to achieve the most stable thermodynamic product while simultaneously targeting the desired size and structure crucial for enabling specific functions. While significant progress is made in the synthesis and processing of 2D COFs, the development of processable 3D COF nanocrystals remains challenging. Here, a water-based nanoreactor technology for producing processable sub-40 nm 3D COF nanoparticles at ambient conditions is presented. Significantly, this technology not only improves the processability of the synthesized 3D COF, but also unveils exciting possibilities for their utilization in previously unexplored domains, such as nano/microrobotics and biomedicine, which are limited by larger crystallites.

Scalable Synthesis and Electrocatalytic Performance of Highly Fluorinated Covalent Organic Frameworks for Oxygen Reduction.

In this study, we present a novel approach for the synthesis of covalent organic frameworks (COFs) that overcomes the common limitations of non-scalable solvothermal procedures. Our method allows for the room-temperature and scalable synthesis of a highly fluorinated DFTAPB-TFTA-COF, which exhibits intrinsic hydrophobicity. We used DFT-based calculations to elucidate the role of the fluorine atoms in enhancing the crystallinity of the material through corrugation effects, resulting in maximized interlayer interactions, as disclosed both from PXRD structural resolution and theoretical simulations. We further investigated the electrocatalytic properties of this material towards the oxygen reduction reaction (ORR). Our results show that the fluorinated COF produces hydrogen peroxide selectively with low overpotential (0.062 V) and high turnover frequency (0.0757 s-1 ) without the addition of any conductive additives. These values are among the best reported for non-pyrolyzed and metal-free electrocatalysts. Finally, we employed DFT-based calculations to analyse the reaction mechanism, highlighting the crucial role of the fluorine atom in the active site assembly. Our findings shed light on the potential of fluorinated COFs as promising electrocatalysts for the ORR, as well as their potential applications in other fields.

Covalent transfer of chemical gradients onto a graphenic surface with 2D and 3D control.

Control over the functionalization of graphenic materials is key to enable their full application in electronic and optical technologies. Covalent functionalization strategies have been proposed as an approach to tailor the interfaces' structure and properties. However, to date, none of the proposed methods allow for a covalent functionalization with control over the grafting density, layer thickness and/or morphology, which are key aspects for fine-tuning the processability and performance of graphenic materials. Here, we show that the no-slip boundary condition at the walls of a continuous flow microfluidic device offers a way to generate controlled chemical gradients onto a graphenic material with 2D and 3D control, a possibility that will allow the sophisticated functionalization of these technologically-relevant materials.

Iron Oxyhydroxide-Covalent Organic Framework Nanocomposite for Efficient As(III) Removal in Water.

The presence of heavy metal ions in water is an environmental issue derived mainly from industrial and mineral contamination. Metal ions such as Cd(II), Pb(II), Hg(II), or As(III) are a significant health concern worldwide because of their high toxicity, mobility, and persistence. Covalent organic frameworks (COFs) are an emerging class of crystalline organic porous materials that exhibit very interesting properties such as chemical stability, tailored design, and low density. COFs also allow the formation of composites with remarkable features because of the synergistic combination effect of their components. These characteristics make them suitable for various applications, among which water remediation is highly relevant. Herein, we present a novel nanocomposite of iron oxyhydroxide@COF (FeOOH@Tz-COF) in which lepidocrocite (γ-FeOOH) nanorods are embedded in between the COF nanoparticles favoring As(III) remediation in water. The results show a remarkable 98.4% As(III) uptake capacity in a few minutes and impressive removal efficiency in a wide pH range (pH 5-11). The chemical stability of the material in the working pH range and the capability of capturing other toxic heavy metals such as Pb(II) and Hg(II) without interference confirm the potential of FeOOH@Tz-COF as an effective adsorbent for water remediation even under harsh conditions.

Synthesis of 2D Porous Crystalline Materials in Simulated Microgravity.

To date, crystallization studies conducted in space laboratories, which are prohibitively costly and unsuitable to most research laboratories, have shown the valuable effects of microgravity during crystal growth and morphogenesis. Herein, an easy and highly efficient method is shown to achieve space-like experimentation conditions on Earth employing custom-made microfluidic devices to fabricate 2D porous crystalline molecular frameworks. It is confirmed that experimentation under these simulated microgravity conditions has unprecedented effects on the orientation, compactness and crack-free generation of 2D porous crystalline molecular frameworks as well as in their integration and crystal morphogenesis. It is believed that this work will provide a new "playground" to chemists, physicists, and materials scientists that desire to process unprecedented 2D functional materials and devices.

Macroscopic Ultralight Aerogel Monoliths of Imine-based Covalent Organic Frameworks.

The use of covalent organic frameworks (COFs) in practical applications demands shaping them into macroscopic objects, which remains challenging. Herein, we report a simple three-step method to produce COF aerogels, based on sol-gel transition, solvent-exchange, and supercritical CO2 drying, in which 2D imine-based COF sheets link together to form hierarchical porous structures. The resultant COF aerogel monoliths have extremely low densities (ca. 0.02 g cm-3 ), high porosity (total porosity values of ca. 99 %), and mechanically behave as elastic materials under a moderate strain (<25-35 %) but become plastic under greater strain. Moreover, these COF aerogels maintain the micro- and meso-porosity of their constituent COFs, and show excellent absorption capacity (e.g. toluene uptake: 32 g g-1 ), with high removal efficiency (ca. 99 %). The same three-step method can be used to create functional composites of these COF aerogels with nanomaterials.

Exfoliation of Alpha-Germanium: A Covalent Diamond-Like Structure.

2D materials have opened a new field in materials science with outstanding scientific and technological impact. A largely explored route for the preparation of 2D materials is the exfoliation of layered crystals with weak forces between their layers. However, its application to covalent crystals remains elusive. Herein, a further step is taken by introducing the exfoliation of germanium, a narrow-bandgap semiconductor presenting a 3D diamond-like structure with strong covalent bonds. Pure α-germanium is exfoliated following a simple one-step procedure assisted by wet ball-milling, allowing gram-scale fabrication of high-quality layers with large lateral dimensions and nanometer thicknesses. The generated flakes are thoroughly characterized by different techniques, giving evidence that the new 2D material exhibits bandgaps that depend on both the crystallographic direction and the number of layers. Besides potential technological applications, this work is also of interest for the search of 2D materials with new properties.

SERS Barcode Libraries: A Microfluidic Approach.

Microfluidic technologies have emerged as advanced tools for surface-enhanced Raman spectroscopy (SERS). They have proved to be particularly appealing for in situ and real-time detection of analytes at extremely low concentrations and down to the 10 × 10-15 m level. However, the ability to prepare reconfigurable and reusable devices endowing multiple detection capabilities is an unresolved challenge. Herein, a microfluidic-based method that allows an extraordinary spatial control over the localization of multiple active SERS substrates in a single microfluidic channel is presented. It is shown that this technology provides for exquisite control over analyte transport to specific detection points, while avoiding cross-contamination; a feature that enables the simultaneous detection of multiple analytes within the same microfluidic channel. Additionally, it is demonstrated that the SERS substrates can be rationally designed in a straightforward manner and that they allow for the detection of single molecules (at concentrations as low as 10-14 m). Finally, it is shown that rapid etching and reconstruction of SERS substrates provides for reconfigurable and reusable operation.

Green synthesis of imine-based covalent organic frameworks in water.

Dynamic covalent bonds have been advantageously used to direct the synthesis of crystalline porous covalent organic frameworks (COFs). Unlike the standard synthetic protocols that involve harsh conditions, this work provides a high-yield "one-pot" green synthesis of imine-based COFs in water. Additionally, this aqueous synthesis can be performed under microwave conditions, considerably reducing the reaction time.

Biomimetic Synthesis of Sub-20 nm Covalent Organic Frameworks in Water.

Covalent organic frameworks (COFs) are commonly synthesized under harsh conditions yielding unprocessable powders. Control in their crystallization process and growth has been limited to studies conducted in hazardous organic solvents. Herein, we report a one-pot synthetic method that yields stable aqueous colloidal solutions of sub-20 nm crystalline imine-based COF particles at room temperature and ambient pressure. Additionally, through the combination of experimental and computational studies, we investigated the mechanisms and forces underlying the formation of such imine-based COF colloids in water. Further, we show that our method can be used to process the colloidal solution into 2D and 3D COF shapes as well as to generate a COF ink that can be directly printed onto surfaces. These findings should open new vistas in COF chemistry, enabling new application areas.

Processing of covalent organic frameworks: an ingredient for a material to succeed.

Covalent organic frameworks (COFs) are an emerging class of new organic polymers showing tuneable permanent porosity and crystallinity. They are formed, using modular chemistry concepts, by condensation reactions between their molecular precursors based on the formation of dynamic bonds. Despite much effort having been devoted towards the design of the physical and/or chemical properties of these materials by selecting their initial building blocks, the importance of processability for their applications has only recently emerged. This tutorial review article rationalizes the strategies used so far on COF processability leading to the formation of thin-films, membranes, or individual particles with controlled shape and size as well as composite fabrication. We aim to provide a rational perspective of the importance of COF processability towards potential applications of COFs in many different fields which are at the forefront of research in materials science.

Spray drying for making covalent chemistry II: synthesis of covalent-organic framework superstructures and related composites.

Here we report a method that combines the spray-drying technique with a dynamic covalent chemistry process to synthesize zero-dimensional, spherical and microscale superstructures made from the assembly of imine-based COF nanocrystals. This methodology also enables the integration of other functional materials into these superstructures forming COF-based composites.

Ionic Conductivity and Potential Application for Fuel Cell of a Modified Imine-Based Covalent Organic Framework.

We present the novel potential application of imine-based covalent organic frameworks (COFs), formed by the direct Schiff reaction between 1,3,5-tris(4-aminophenyl)benzene and 1,3,5-benzenetricarbaldehyde building blocks in m-cresol or acetic acid, named RT-COF-1 or RT-COF-1Ac/RT-COF-1AcB. The post-synthetic treatment of RT-COF-1 with LiCl leads to the formation of LiCl@RT-COF-1. The ionic conductivity of this series of polyimine COFs has been characterized at variable temperature and humidity, using electrochemical impedance spectroscopy. LiCl@RT-COF-1 exhibits a conductivity value of 6.45 × 10-3 S cm-1 (at 313 K and 100% relative humidity) which is among the highest values so far reported in proton conduction for COFs. The mechanism of conduction has been determined using 1H and 7Li solid-state nuclear magnetic resonance spectroscopy. Interestingly, these materials, in the presence of controlled amounts of acetic acid and under pressure, show a remarkable processability that gives rise to quasi-transparent and flexible films showing in-plane structural order as confirmed by X-ray crystallography. Finally, we prove that these films are useful for the construction of proton exchange membrane fuel cells (PEMFC) reaching values up to 12.95 mW cm-2 and 53.1 mA cm-2 for maximum power and current density at 323 K, respectively.

Microfluidic-based Synthesis of Covalent Organic Frameworks (COFs): A Tool for Continuous Production of COF Fibers and Direct Printing on a Surface.

Covalent Organic Frameworks (COFs) are a class of porous covalent materials which are frequently synthesized as unprocessable crystalline powders. The first COF was reported in 2005 with much effort centered on the establishment of new synthetic routes for its preparation. To date, most available synthetic methods for COF synthesis are based on bulk mixing under solvothermal conditions. Therefore, there is increasing interest in developing systematic protocols for COF synthesis that provide for fine control over reaction conditions and improve COF processability on surfaces, which is essential for their use in practical applications. Herein, we present a novel microfluidic-based method for COF synthesis where the reaction between two constituent building blocks, 1,3,5-benzenetricarbaldehyde (BTCA) and 1,3,5-tris(4-aminophenyl)benzene (TAPB), takes place under controlled diffusion conditions and at room temperature. Using such an approach yields sponge-like, crystalline fibers of a COF material, hereafter called MF-COF. The mechanical properties of MF-COF and the dynamic nature of the approach allow the continuous production of MF-COF fibers and their direct printing onto surfaces. The general method opens new potential applications requiring advanced printing of 2D or 3D COF structures on flexible or rigid surfaces.

Confining Functional Nanoparticles into Colloidal Imine-Based COF Spheres by a Sequential Encapsulation-Crystallization Method.

Here, a two-step method is reported that enables imparting new functionalities to covalent organic frameworks (COFs) by nanoparticle confinement. The direct reaction between 1,3,5-tris(4-aminophenyl)benzene and 1,3,5-benzenetricarbaldehyde in the presence of a variety of metallic/metal-oxide nanoparticles resulted in embedding of the nanoparticles in amorphous and non-porous imine-linked polymer organic spheres (NP@a-1). Post-treatment reactions of NP@a-1 with acetic acid under reflux led to crystalline and porous imine-based COF-hybrid spheres (NP@c-1). Interestingly, Au@c-1 and Pd@c-1 were found to be catalytically active.

Antimonene: Mechanical Isolation of Highly Stable Antimonene under Ambient Conditions (Adv. Mater. 30/2016).

On page 6332, J. Gómez-Herrero, F. Zamora, and co-workers describe the isolation of antimonene, a new allotrope of antimony that consists of a single layer of atoms. They obtain antimonene flakes by the scotch tape method; these flakes are highly stable in ambient conditions and even when immersed in water. The 1.2 eV gap calculated in this study suggests potential applications in optoelectronics.

Few-Layer Antimonene by Liquid-Phase Exfoliation.

We report on a fast and simple method to produce highly stable isopropanol/water (4:1) suspensions of few-layer antimonene by liquid-phase exfoliation of antimony crystals in a process that is assisted by sonication but does not require the addition of any surfactant. This straightforward method generates dispersions of few-layer antimonene suitable for on-surface isolation. Analysis by atomic force microscopy, scanning transmission electron microscopy, and electron energy loss spectroscopy confirmed the formation of high-quality few-layer antimonene nanosheets with large lateral dimensions. These nanolayers are extremely stable under ambient conditions. Their Raman signals are strongly thickness-dependent, which was rationalized by means of density functional theory calculations.

Mechanical Isolation of Highly Stable Antimonene under Ambient Conditions.

Antimonene fabricated by mechanical exfoliation is highly stable under atmospheric conditions over periods of months and even when immersed in water. Density functional theory confirms the experiments and predicts an electronic gap of ≈1 eV. These results highlight the use of antimonene for optoelectronics applications.

Crystalline fibres of a covalent organic framework through bottom-up microfluidic synthesis.

A microfluidic chip has been used to prepare fibres of a porous polymer with high structural order, setting a precedent for the generation of a wide variety of materials using this reagent mixing approach that provides unique materials not accessible easily through bulk processes. The reaction between 1,3,5-tris(4-aminophenyl)benzene and 1,3,5-benzenetricarbaldehyde in acetic acid under continuous microfluidic flow conditions leads to the formation of a highly crystalline and porous covalent organic framework (hereafter denoted as MF-COF-1), consisting of fibrillar micro-structures, which have mechanical stability that allows for direct drawing of objects on a surface.

Direct On-Surface Patterning of a Crystalline Laminar Covalent Organic Framework Synthesized at Room Temperature.

We report herein an efficient, fast, and simple synthesis of an imine-based covalent organic framework (COF) at room temperature (hereafter, RT-COF-1). RT-COF-1 shows a layered hexagonal structure exhibiting channels, is robust, and is porous to N2 and CO2 . The room-temperature synthesis has enabled us to fabricate and position low-cost micro- and submicropatterns of RT-COF-1 on several surfaces, including solid SiO2 substrates and flexible acetate paper, by using lithographically controlled wetting and conventional ink-jet printing.