Responses of soil microbiome to copper-based materials (nano and bulk) for agricultural applications: An indoor-mesocosm experiment.

The foreseen increasing application of copper-based nanomaterials (Cu-NMs), replacing or complementing existing Cu-agrochemicals, may negatively impact the soil microbiome. Thus, we studied the effects on soil microbiome function and composition of nano copper oxide (nCuO) or copper hydroxide NMs in a commercial (Kocide®3000) or a lab-synthetized formulation (nCu(OH)2) or bulk copper hydroxide (Cu(OH)2-B), at the commonly recommended Cu dose of 50 mg(Cu)kg-1 soil. Microbial responses were studied over 28 days in a designed indoor mesocosm. On day-28, in comparison to non-treated soil (CT), all Cu-treatments led to a reduction in dehydrogenase (95% to 68%), arylsulfatase (41% to 27%), and urease (40% to 20%) activity. There was a 32% increase in the utilization of carbon substrates in the nCuO-treatment and an increased abundance of viable bacteria in the nCu(OH)2-treatment (75% of heterotrophic and 69% of P-solubilizing bacteria). The relative abundance of Acidobacteria [Kocide®3000, nCuO, and Cu(OH)2-B treatments] and Flavobacteriia [nCu(OH)2-treatment] was negatively affected by Cu exposure. The abundance of Cu-tolerant bacteria increased in soils treated with Kocide®3000 (Clostridia) and nCu(OH)2 (Gemmatimonadetes). All Cu-treated soils exhibited a reduced abundance of denitrification-related genes (0.05% of nosZ gene). The DTPA-extractable pool of ionic Cu(II) varied among treatments: Cu(OH)2-B > Kocide®3000 âˆ¼ nCuO>nCu(OH)2, which may explain changes on the soil microbiome composition, at the genera and OTU levels. Thus, our study revealed that Cu-materials (nano and bulk) influence the soil microbiome with implications on its ecological role. It highlights the importance of assessing the impact of Cu-materials under dynamic and complex exposure scenarios and emphasizes the need for specific regulatory frameworks for NMs.

Effect of a Zinc Phosphate Shell on the Uptake and Translocation of Foliarly Applied ZnO Nanoparticles in Pepper Plants (Capsicum annuum).

Here, isotopically labeled 68ZnO NPs (ZnO NPs) and 68ZnO NPs with a thin 68Zn3(PO4)2 shell (ZnO_Ph NPs) were foliarly applied (40 µg Zn) to pepper plants (Capsicum annuum) to determine the effect of surface chemistry of ZnO NPs on the Zn uptake and systemic translocation to plant organs over 6 weeks. Despite similar dissolution of both Zn-based NPs after 3 weeks, the Zn3(PO4)2 shell on ZnO_Ph NPs (48 ± 12 nm; -18.1 ± 0.6 mV) enabled a leaf uptake of 2.31 ± 0.34 µg of Zn, which is 2.7 times higher than the 0.86 ± 0.18 µg of Zn observed for ZnO NPs (26 ± 8 nm; 14.6 ± 0.4 mV). Further, ZnO_Ph NPs led to higher Zn mobility and phloem loading, while Zn from ZnO NPs was stored in the epidermal tissues, possibly through cell wall immobilization as a storage strategy. These differences led to higher translocation of Zn from the ZnO_Ph NPs within all plant compartments. ZnO_Ph NPs were also more persistent as NPs in the exposed leaf and in the plant stem over time. As a result, the treatment of ZnO_Ph NPs induced significantly higher Zn transport to the fruit than ZnO NPs. As determined by spICP-TOFMS, Zn in the fruit was not in the NP form. These results suggest that the Zn3(PO4)2 shell on ZnO NPs can help promote the transport of Zn to pepper fruits when foliarly applied. This work provides insight into the role of Zn3(PO4)2 on the surface of ZnO NPs in foliar uptake and in planta biodistribution for improving Zn delivery to edible plant parts and ultimately improving the Zn content in food for human consumption.

Granulated biomass fly ash coupled with fenton process for pulp and paper wastewater treatment.

The work describes the combination of granulated biomass fly ash (GBFA) with Fenton process to enhance the removal of adsorbable organic halides (AOX) from pulp bleaching wastewater. At optimal operating conditions, wastewater's chemical and biochemical oxygen demand (COD and BOD5, respectively) and colour were also quantified, and operating cost of treatment assessed. For the first time, raw pulp bleaching wastewater was used to granulate BFA, instead of water, reducing the water footprint of the treatment. Five wastewater treatment setups were studied: (i) conventional Fenton process; (ii) GBFA application; (iii) simultaneous application of GBFA and Fenton process; (iv) sequential treatment by GBFA followed by Fenton process; (v) sequential treatment by Fenton process followed by GBFA. The latter yielded the highest AOX removal (60-70%), whilst COD was also reduced (≈15%) and wastewater biodegradability (BOD5/COD) was enhanced from 0.075 to a maximum of 0.134. Another positive feature of the proposed solution was that GBFA were successfully recovered and reused without regeneration, yielding similar AOX removal compared with fresh GBFA. The operating cost of removing 1 g of AOX from the pulp bleaching wastewater by the optimal treatment setup (60-70% removal of AOX) was 14-26% lower than the operating cost of conducting Fenton process alone (50% removal of AOX).

Biomass ash formulations as sustainable improvers for mining soil health recovery: Linking soil properties and ecotoxicity.

There is a growing need to recover degraded soils to restore their essential ecosystem services and limit damages of anthropic activities onto these systems. Safe and sustainable solutions for long-term recovery must be designed, ideally by recycling existing resources. Using ash from combustion of residual forest biomass at the pulp and paper industry is an interesting and sustainable strategy to recover mining soils. However, formulations must be found to limit the potential toxicity associated with soluble salts and chloride that ash contains. Here, we assessed the effectiveness of three field ash-based amendments for the recovery of three highly acidic soils from Portuguese abandoned mines. Three amendments were tested: an un-stabilized mixture of ash and biological sludge, granulated ash, and granulated ash mixed with composted sludge. One year after application in open field plots (in the scope of LIFE No_Waste project), soil health restoration was evaluated through (i) soil physico-chemical characterization and (ii) soil habitat functions though standardized ecotoxicological tests. This study highlights that stabilized materials provided nutrients, organic matter and alkalinity that corrected soil pH and decreased metal bioavailability, while controlling the release of soluble salts and chloride from ash. This soil improvement correlated with improved soil model organisms' reproduction and survival. For similar amendment, the native soil properties studied (as soil native electrical conductivity) affected the level of organism response. This work provides evidence that ash stabilization, formulation and supplementation with organic matter could be sustainable strategies to restore highly degraded mining soils and to recover their ecological functions. It further highlights the importance of analyzing combined effects on soil physico-chemical properties and ecological function recovery to assess restoration strategy efficiencies in complex multi-stressor environments.

Critical Review: Role of Inorganic Nanoparticle Properties on Their Foliar Uptake and in Planta Translocation.

There is increasing pressure on global agricultural systems due to higher food demand, climate change, and environmental concerns. The design of nanostructures is proposed as one of the economically viable technological solutions that can make agrochemical use (fertilizers and pesticides) more efficient through reduced runoff, increased foliar uptake and bioavailability, and decreased environmental impacts. However, gaps in knowledge about the transport of nanoparticles across the leaf surface and their behavior in planta limit the rational design of nanoparticles for foliar delivery with controlled fate and limited risk. Here, the current literature on nano-objects deposited on leaves is reviewed. The different possible foliar routes of uptake (stomata, cuticle, trichomes, hydathodes, necrotic spots) are discussed, along with the paths of translocation, via the phloem, from the leaf to the end sinks (mature and developing tissues, roots, rhizosphere). This review details the interplays between morphological constraints, environmental stimuli, and physical-chemical properties of nanoparticles influencing their fate, transformation, and transport after foliar deposition. A metadata analysis from the existing literature highlighted that plant used for testing nanoparticle fate are most often dicotyledon plants (75%), while monocotyledons (as cereals) are less considered. Correlations on parameters calculated from the literature indicated that nanoparticle dose, size, zeta potential, and affinity to organic phases correlated with leaf-to-sink translocation, demonstrating that targeting nanoparticles to specific plant compartments by design should be achievable. Correlations also showed that time and plant growth seemed to be drivers for in planta mobility, parameters that are largely overlooked in the literature. This review thus highlights the material design opportunities and the knowledge gaps for targeted, stimuli driven deliveries of safe nanomaterials for agriculture.

Investigation of pore water and soil extraction tests for characterizing the fate of poorly soluble metal-oxide nanoparticles.

Here we compared the efficiency of Cu extraction (dissolved + particulate) from two soils dosed with CuO nanoparticles (NPs) at 50 or 250 mg kg-1 by pore water collection, and single- and multi-step soil extraction tests. Pore water collection recovered low levels of Cu (<0.18%, regardless of soil type or Cu dose). Single soil extraction by either CaCl2 or DI water led to higher Cu recovery than pore water collection, but still <3% of total dose. These methods were useful for assessing the labile Cu ions pool. This fraction is controlled by Cu2+ dissolved from CuO NPs and it varies with time and soil type. Particulate Cu was poorly retrieved (<0.7%) by pore water extraction and by single-step soil extraction using CaCl2 solution or water. Multi-step extraction including dispersing and metal-chelating agents allowed for simultaneous characterization of dissolved Cu (total ionic Cu2+, 24-49% of dosed Cu), extractable CuO NPs (reversibly attached, 15-26% of dosed Cu), and non-extractable CuO NPs (irreversibly attached, 36-50% of dosed Cu), and it could describe the aging of NPs along 30 d. This method extracted a significantly higher concentration of Cu than pore water collection and was less sensitive to method parameters (e.g. filtration). This multi-step method can reduce pore water extraction-related factors that may confound the interpretation of environmental exposure data in NPs studies, and describe upper limits of both exchangeable Cu2+ and dispersible CuO NPs in soil that can potentially become bioavailable to plants and organisms and thus provide a sounder basis for risks evaluations.

Effect of Soil Organic Matter, Soil pH, and Moisture Content on Solubility and Dissolution Rate of CuO NPs in Soil.

The objectives of this research were to quantify the impact of organic matter content, soil pH and moisture content on the dissolution rate and solubility of copper oxide nanoparticles (CuO NPs) in soil, and to develop an empirical model to predict the dissolution kinetics of CuO NPs in soil. CuO NPs were dosed into standard LUFA soils with various moisture content, pH and organic carbon content. Chemical extractions were applied to measure the CuO NP dissolution kinetics. Doubling the reactive organic carbon content in LUFA 2.1 soil increased the solubility of CuO NP 2.7-fold but did not change the dissolution rate constant. Increasing the soil pH from 5.9 to 6.8 in LUFA 2.2 soil decreased the dissolution rate constant from 0.56 mol1/3·kg1/3·s-1 to 0.17 mol1/3·kg1/3·s-1 without changing the solubility of CuO NP in soil. For six soils, the solubility of CuO NP correlated well with soil organic matter content ( R2 = 0.89) independent of soil pH. In contrast, the dissolution rate constant correlated with pH for pH < 6.3 ( R2 = 0.89), independent of soil organic matter content. These relationships predicted the solubility and dissolution rate constants of CuO NP in two test soils (pH 5.0 and pH 7.6). Moisture content showed negligible impact on the dissolution kinetics of CuO NPs. Our study suggests that soil pH and organic matter content affect the dissolution behavior of CuO NP in soil in a predictable manner.

Pedotransfer functions of potentially toxic elements in tropical soils cultivated with vegetable crops.

The anthropogenic input of potentially toxic elements (PTEs) from industry, agrochemicals, etc., into the environment are of great concern. Models derived from pedotransfer functions can provide estimates of the levels of PTEs based on soil attributes. Based on the importance of these models in studies in contaminated areas, we assessed the concentrations of the reactive contents of Ba, Cu, Cr, Ni, Pb, and Zn in soils cultivated with vegetable crops in the state of São Paulo, Brazil. We also evaluated the influence of chemical and physical soil attributes on their reactivity and availability. The reactive contents of PTEs represent the fraction of PTEs easily sorbed at the adsorptions sites of organic matter, iron hydroxides, or clay. This fraction can supply information about the PTE content that is more or less readily released into the soil solution. The reactive and available fraction was extracted with 0.43 M HNO3 and 0.01 M CaCl2, respectively. The proportion of reactivity of metal pools decreased in the order of Ba>Zn > Cu > Pb > Ni > Cr. The empirical models were able to predict the relationship between the reactive fractions, the pseudototal content, and the soil attributes. The available concentrations of Cr, Cu, Ni, and Pb in the soils were lower than the limit of quantification, while 3% of the Ba content and 1% of the Zn content were available in the soil solution in relation to their pseudototal content, suggesting low mobility of these elements in the soil.

CuO Nanoparticle Dissolution and Toxicity to Wheat ( Triticum aestivum) in Rhizosphere Soil.

It has been suggested, but not previously measured, that dissolution kinetics of soluble nanoparticles such as CuO nanoparticles (NPs) in soil affect their phytotoxicity. An added complexity is that such dissolution is also affected by the presence of plant roots. Here, we measured the rate of dissolution of CuO NPs in bulk soil, and in soil in which wheat plants ( Triticum aestivum) were grown under two soil NP dosing conditions: (a) freshly added CuO NPs (500 mg Cu/kg soil) and (b) CuO NPs aged for 28 d before planting. At the end of the plant growth period (14 d), available Cu was measured in three different soil compartments: bulk (not associated with roots), loosely attached to roots, and rhizosphere (soil firmly attached to roots). The labile Cu fraction increased from 17 mg/kg to 223 mg/kg in fresh treatments and from 283 mg/kg to 305 mg/kg in aged treatments over the growth period due to dissolution. Aging CuO NPs increased the toxicity to Triticum aestivum (reduction in root maximal length). The presence of roots in the soil had opposite and somewhat compensatory effects on NP dissolution, as measured in rhizosphere soil. pH increased 0.4 pH units for fresh NP treatments and 0.6 pH units for aged NPs. This lowered CuO NP dissolution in rhizosphere soil. Exudates from T. aestivum roots also increased soluble Cu in pore water. CaCl2 extractable Cu concentrations increaed in rhizosphere soil compared to bulk soil, from 1.8 mg/kg to 6.2 mg/kg in fresh treatment and from 3.4 mg/kg to 5.4 mg/kg in aged treatments. Our study correlated CuO NP dissolution and the resulting Cu ion exposure profile to phytotoxicity, and showed that plant-induced changes in rhizosphere conditions should be considered when measuring the dissolution of CuO NPs near roots.

Ashes from fluidized bed combustion of residual forest biomass: recycling to soil as a viable management option.

Although bottom ash (BA) [or mixtures of bottom and fly ash (FA)] from clean biomass fuels is currently used as liming agent, additive for compost, and fertilizer on agricultural and forest soils in certain European countries, in several other countries most of the ashes are currently disposed in landfills. This is due to both a lack of a proper classification of the materials and of regulatory barriers.Chemical characterization including analysis of an array of potentially toxic elements (PTEs) proved that over 100,000 tons of BA currently landfilled every year in Portugal actually complied with legal limits for PTEs for soil fertilizers applied in other countries. Pot experiments were conducted, testing three dosages of BA and FA (1, 2.5, and 5%, in weight) in three mining soils with different properties. Additions of ash materials to soils led to an increase in the pore water pH relative to control pots (0% of ash added) and had a clear impact on DOC and on the solubilization of both macro- and micronutrients (notably Cu).The results from the case study using BA and FA from a Portuguese biomass thermal power plant demonstrate that it is imperative to further develop a regulatory framework to alleviate technological and environmental barriers for biomass ash utilization as raw material for fertilizers and/or soil liming agent, in accordance with the goals of the circular economy. A more harmonized view on how to assess the merits and risks of the re-use of these materials is also needed.

Evaluation of the Single Dilute (0.43 M) Nitric Acid Extraction to Determine Geochemically Reactive Elements in Soil.

Recently a dilute nitric acid extraction (0.43 M) was adopted by ISO (ISO-17586:2016) as standard for extraction of geochemically reactive elements in soil and soil like materials. Here we evaluate the performance of this extraction for a wide range of elements by mechanistic geochemical modeling. Model predictions indicate that the extraction recovers the reactive concentration quantitatively (>90%). However, at low ratios of element to reactive surfaces the extraction underestimates reactive Cu, Cr, As, and Mo, that is, elements with a particularly high affinity for organic matter or oxides. The 0.43 M HNO3 together with more dilute and concentrated acid extractions were evaluated by comparing model-predicted and measured dissolved concentrations in CaCl2 soil extracts, using the different extractions as alternative model-input. Mean errors of the predictions based on 0.43 M HNO3 are generally within a factor three, while Mo is underestimated and Co, Ni and Zn in soils with pH > 6 are overestimated, for which possible causes are discussed. Model predictions using 0.43 M HNO3 are superior to those using 0.1 M HNO3 or Aqua Regia that under- and overestimate the reactive element contents, respectively. Low concentrations of oxyanions in our data set and structural underestimation of their reactive concentrations warrant further investigation.

Time and Nanoparticle Concentration Affect the Extractability of Cu from CuO NP-Amended Soil.

We assess the effect of CuO nanoparticle (NP) concentration and soil aging time on the extractability of Cu from a standard sandy soil (Lufa 2.1). The soil was dosed with CuO NPs or Cu(NO3)2 at 10 mg/kg or 100 mg/kg of total added Cu, and then extracted using either 0.01 M CaCl2 or 0.005 M diethylenetriaminepentaacetic acid (DTPA) (pH 7.6) extraction fluid at selected times over 31 days. For the high dose of CuO NPs, the amount of DTPA-extractable Cu in soil increased from 3 wt % immediately after mixing to 38 wt % after 31 days. In contrast, the extractability of Cu(NO3)2 was highest initially, decreasing with time. The increase in extractability was attributed to dissolution of CuO NPs in the soil. This was confirmed with synchrotron X-ray absorption near edge structure measurements. The CuO NP dissolution kinetics were modeled by a first-order dissolution model. Our findings indicate that dissolution, concentration, and aging time are important factors that influence Cu extractability in CuO NP-amended soil and suggest that a time-dependent series of extractions could be developed as a functional assay to determine the dissolution rate constant.

Eriophorum angustifolium and Lolium perenne metabolic adaptations to metals- and metalloids-induced anomalies in the vicinity of a chemical industrial complex.

As plants constitute the foundation of the food chain, concerns have been raised about the possibility of toxic concentrations of metals and metalloids being transported from plants to the higher food chain strata. In this perspective, the use of important phytotoxicity endpoints may be of utmost significance in assessing the hazardous nature of metals and metalloids and also in developing ecological soil screening levels. The current study aimed to investigate the role of glutathione (GSH) and its associated enzymes in the metabolic adaptation of two grass species namely Eriophorum angustifolium Honck. and Lolium perenne L. to metals and metalloids stress in the vicinity of a chemical industrial complex (Estarreja, Portugal). Soil and plant samples were collected from contaminated (C) and non-contaminated (reference, R) sites, respectively, near and away from the Estarreja Chemical Complex, Portugal. Soils (from 0 to 10 and 10 to 20 cm depths) were analyzed for pH, organic carbon, and metals and metalloids concentrations. Plant samples were processed fresh for physiological and biochemical estimations, while oven-dried plant samples were used for metals and metalloids determinations following standard methodologies. Both soils and plants from the industrial area exhibited differential concentrations of major metals and metalloids including As, Cu, Hg, Pb, and Zn. In particular, L. perenne shoot displayed significantly higher and lower concentrations of Pb and As, respectively at contaminated site (vs. E. angustifolium). Irrespective of sites, L. perenne shoot exhibited significantly higher total GSH pool, oxidized glutathione (GSSG) and oxidized protein (vs. E. angustifolium). Additionally, severe damages to photosynthetic pigments, proteins, cellular membrane integrity (in terms of electrolyte leakage), and lipid peroxidation were also perceptible in L. perenne shoot. Contrarily, irrespective of the sites, activities of catalase and GSH-regenerating enzyme, GSH reductase, and GSH-metabolizing enzymes such as GSH peroxidase and GSH sulfotransferase were significantly higher in shoot of E. angustifolium. Despite the higher total GSH content, L. perenne is vulnerable to multi-metals-induced stress in comparison to E. angustifolium as depicted by increased GSH- and protein oxidation, low reactive oxygen radical-processing potential (exhibited in terms of low catalase activity) and poor GSH pool utilization efficiency (in terms of lower GSH-associated enzymes activities). The outcome of the present study may be significant for understanding vital GSH-mediated metals and metalloids tolerance mechanisms in plants as well as their unsuitability for animal consumption due to higher metals and metalloids burdens.

Pollution problems in the northeast Atlantic: lessons learned for emerging pollutants such as the platinum group elements.

This paper provides an overview of the evolution of pollution problems in the Northeast Atlantic and associated responses and considers the effectiveness of these measures on environmental contamination. It identifies shortcomings in past practices and shows how marine environmental pollution may be perpetuated if new products and processes release novel contaminants or "emerging substances" without adequate management on a precautionary basis. The study concludes that it is necessary to develop innovative techniques capable of making reasonable quantitative estimates of not only environmental pathways, loads, and concentrations but also the socioeconomic drivers and "upstream" control measures (control, reduction, or elimination of emissions) so that a clear understanding of the causes and effects of our actions can be obtained. The development of a European Observatory for Emerging Substances to coordinate concerns, observations, and practices is suggested as a proactive approach for anticipating emerging problems.