Recent Progress in Functional Nanomaterials towards the Storage, Separation, and Removal of Tritium.

Tritium is a sustainable next-generation prime fuel for generating nuclear energy through fusion reactions to fulfill the increasing global energy demand. Owing to the scarcity-high demand tradeoff, tritium must be bred inside a fusion reactor to ensure sustainability and must therefore be separated from its isotopes (protium and deuterium) in pure form, stored safely, and supplied on demand. Existing multistage isotope separation technologies exhibit low separation efficiency and require intensive energy inputs and large capital investments. Furthermore, tritium-contaminated heavy water constitutes a major fraction of nuclear waste, and accidents like the one at Fukushima Daiichi leave behind thousands of tons of diluted tritiated water, whose removal is beneficial from an environmental point of view. In this review, the recent progress and main research trends in hydrogen isotope storage and separation by focusing on the use of metal hydride (e.g., intermetallic, and high-entropy alloys), porous (e.g., zeolites and metal organic frameworks (MOFs)), and 2-D layered (e.g., graphene, hexagonal boron nitride (h-BN), and MXenes) materials to separate and store tritium based on their diverse functionalities are discussed. Finally, the challenges and future directions for implementing tritium storage and separation are summarized in the reviewed materials.

Fabrication of a Liquid Scintillator based on 7-Diethylamino-4-Methylcoumarin for Radiation Detection.

Organic liquid scintillation detectors are widely used to measure the presence of radiation. With these devices, there are advantages in that they are easy to manufacture, large in size, and have a short fluorescence decay time. However, they are not suitable for gamma spectroscopy because they are composed of a low-atomic-number material. In this regard, alternative materials for the secondary solute used in basic organic liquid scintillators have been investigated, and the applicability of alternative materials, the detection characteristics, and neutron/gamma identification tests were all assessed. 7-Diethylamino-4-methylcoumarin (DMC), selected as an alternative material, is a benzopyrone derivative in the form of colorless crystals with high fluorescence, a high quantum yield in the visible region, and excellent light stability. In addition, it has a large Stokes shift, and solubility in a solvent is good. Through an analysis in this study, it was found that the absorption wavelength range of DMC coincides with the emission wavelength range of PPO, which is the primary solute used with DMC. Finally, it was confirmed that the optimal concentration of DMC was 0.08 wt%. As a result of performing gamma and neutron measurement tests using a DMC-based liquid scintillator, it was found to perform well (FOM = 1.42) compared to a commercial liquid scintillator, BC-501A.

Supra-threshold vibration applied to the foot soles enhances jump height under maximum effort.

Previous studies have shown that absence or reduction of cutaneous sensory feedback can diminish human motor performance under maximum effort. However, it has not been explored whether any appropriate intervention in the cutaneous sensory input can augment the output motor performance, particularly in motor tasks such as jumping that involve the kinematic chain of the entire body. Using shoes with active vibrating insoles, we applied mechanical vibration to the soles of 20 young and healthy adults and evaluated the change in the jump height and muscle activation using within-participants repeated measures. The noise-like vibration having an amplitude of 130% of the sensory threshold of each participant led to an average increase of 0.38 cm in the jump height (p = 0.008) and activation of the rectus femoris of the dominant leg (p = 0.011). These results indicate that application of a properly designed cutaneous stimulus to the soles, the distal end effectors of motor tasks, can augment the output performance by involving the prime movers distant from the end effector.

Impact of Digital Device, Exercise, and Music Intervention Programs on the Cognition and Depression of the Elderly in South Korea: A Meta-Regression Analysis.

BACKGROUND: This study examined the effect of digital devices, exercise, and music intervention programs for the elderly in Korea on their cognition and depression. METHODS: This study selected 70 cognition programs and 46 depression programs for the elderly in Korea. This study controlled the characteristics of the programs and participants, and conducted a meta-regression analysis to estimate the intervention effect size of digital devices, exercise, and music on cognition and depression. RESULTS: The meta-regression analysis revealed that digital device programs had a smaller effect size with respect to the improvement of cognitive functions than programs that did not use digital devices. The exercise programs had a small effect size on depression, but their effect size on cognition was not significantly different. DISCUSSION: These findings provide implications for developing a program that combines music therapy with digital devices and exercise interventions, which can be effective in addressing both cognition and depression.

Application of vibration to the soles reduces minimum toe clearance variability during walking.

Minimum toe clearance (MTC) is an important indicator of the risk of tripping. Aging and neuromuscular diseases often decrease MTC height and increase its variability, leading to a higher risk of tripping. Previous studies have developed visual feedback-based gait training systems to modify MTC. However, these systems are bulky and expensive, and the effects of the training continue only for a short time. We paid attention to the efficacy of vibration in decreasing the variability of gait parameters, and hypothesized that proper vibration applied to soles can reduce the MTC variability. Using shoes embedded with active vibrating insoles, we assessed the efficacy of both sub- and supra-threshold vibration in affecting MTC distribution. Experiment results with 17 young and healthy adults showed that vibration applied throughout the walking task with constant intensity of 130% of sensory threshold significantly decreased MTC variability, whereas sub-threshold vibration yielded no significant effect. These results demonstrate that a properly designed tactile sensory input which is controlled and delivered by a simple wearable device, the active insole, can reduce the MTC variability during walking.

Amino-functionalized POSS nanocage-intercalated titanium carbide (Ti3C2Tx) MXene stacks for efficient cesium and strontium radionuclide sequestration.

In this work, we prepared two-dimensional (2D) stack-structured aminopropylIsobutyl polyhedral oligomeric silsesquioxane (POSS-NH2) intercalated titanium carbide (Ti3C2Tx) MXene material (Ti3C2Tx/POSS-NH2) using a post-intercalation strategy as a potential adsorbent for the removal of cesium (Cs+) and strontium (Sr2+) ions from aqueous solutions. Ti3C2Tx/POSS-NH2 exhibited unprecedented adsorption capacities of 148 and 172 mg g-1 for Cs+ and Sr2+ ions, respectively. Batch adsorption experimental data well fitted the Freundlich isotherm model, which revealed multilayer adsorption of Cs+ and Sr2+ ions onto heterogeneous -OH, -F, -O, and -NH2 adsorption sites of Ti3C2Tx/POSS-NH2 with different energies. Ti3C2Tx/POSS-NH2 exhibited rapid Cs+/Sr2+ ions adsorption kinetics and attained equilibrium within 30 min. Also, Ti3C2Tx/POSS-NH2 exhibited recyclable capability over three cycles and remarkable selectivities of 89% and 93% for Cs+ and Sr2+ ions, respectively, in the presence of co-existing mono- and divalent cations. We suggest the high adsorption capacity of Ti3C2Tx/POSS-NH2 might be due to the synergistic effects of (i) increased inter-lamellar distance between Ti3C2Tx galleries due to POSS-NH2 intercalation, enabling diffusion and encapsulation of large numbers of Cs+/Sr2+ ions, (ii) strong complexation of amine (-NH2) groups of POSS-NH2 with Cs+/Sr2+ ions, and (iii) the presence of large numbers of heterogeneous surface functional groups (e.g., -OH, -F, and -O), which resulted in the adsorptions of Cs+/Sr2+ ions through electrostatic, ion exchange, and surface complexation mechanisms. Given the extraordinary adsorption capacities observed, intercalation appears to be a promising strategy for the effective removal of radioactive Cs+ and Sr2+ ions from aqueous media.

Phoswich Detectors in Sensing Applications.

Herein, we review studies of the integration of Phoswich detectors with readout integrated circuits and the associated performance in a radiological sensing application. The basic concept and knowledge of interactions with scintillation materials and the mechanisms and characteristics of radiological detection are extensively discussed. Additionally, we summarize integrated multiple detection systems and Phoswich detectors in radiological measurements for their device performance. Moreover, we further exhibit recent progress and perspective in the future of Phoswich-based radiological detection and measurement. Finally, we provide perspectives to evaluate the detector performance for radiological detection and measurement. We expect this review can pave the way to understanding the recent status and future challenges for Phoswich detectors for radiological detection and measurement.

Shoes with active insoles mitigate declines in balance after fatigue.

Fatigue can induce postural instability and even lead to falls. However, most current methods to delay or reduce fatigue require long preparatory time, or large and expensive equipment. We propose a convenient method to alleviate postural instability due to fatigue. We paid attention to that fatigue and aging share similar neurophysiological deterioration of sensory-motor function. Considering that stochastic resonance via sub-sensory mechanical vibration increases postural stability in the elderly, we propose that sub-sensory insole vibration reduces the negative effect of fatigue on postural control. We performed experiments with 21 young and healthy adult participants, and demonstrated that insole vibration compensates for the loss of balance ability due to fatigue. The sub-sensory insole vibration restored both the area of center of pressure and the complexity of the time series of the motor output after fatigue to the pre-fatigue levels. The insole units generating the vibration were completely concealed in shoes and controlled by a smart phone. This compact implementation contrasts with the cumbersome procedure of current solutions to fatigue-induced postural instability.

Physico-chemical characterization of caesium and strontium using fluorescent intensity of bacteria in a microfluidic platform.

Recently, the impact of radioactive caesium (Cs) and strontium (Sr) on human health and the ecosystem has been a major concern due to the use of nuclear energy. However, this study observed changes in green-fluorescent (GFP)-tagged Pseudomonas aeruginosa PAO1 biofilms by injecting non-radioactive caesium chloride (CsCl) and strontium chloride (SrCl2) into microstructures embedded in polydimethylsiloxane microfluidic devices, which were used due to their strong toxicity limitations. Four types of microstructures with two different diameters were used in the study. The change of biofilm thickness from fluid velocity and wall shear stress was estimated using computational fluid dynamics and observed throughout the experiment. The effect of pore space became a significant physical factor when the fluid was flowing through the microfluidic devices. As the pore space increased, the biofilm growth increased; therefore, triangular microstructures with the largest pore space showed the best growth of biofilm. Caesium chloride (CsCl) and strontium chloride (SrCl2), less toxic than radioactive caesium (Cs) and strontium (Sr), completely eradicated the P. aeruginosa PAO1 biofilm with low concentrations. The combined effect of toxicity, fluid velocity, wall shear stress and microstructures increased the efficiency of biofilm eradication. These findings on microfluidic chips can help to indirectly predict the impact on human public health and ecosystems without using radioactive chemicals.

Versatile Poly(Diallyl Dimethyl Ammonium Chloride)-Layered Nanocomposites for Removal of Cesium in Water Purification.

In this work, we elucidate polymer-layered hollow Prussian blue-coated magnetic nanocomposites as an adsorbent to remove radioactive cesium from environmentally contaminated water. To do this, Fe3O4 nanoparticles prepared using a coprecipitation method were thickly covered with a layer of cationic polymer to attach hollow Prussian blue through a self-assembly process. The as-synthesized adsorbent was confirmed through various analytical techniques. The adsorbent showed a high surface area (166.16 m²/g) with an excellent cesium adsorbent capacity and removal efficiency of 32.8 mg/g and 99.69%, respectively. Moreover, the superparamagnetism allows effective recovery of the adsorbent using an external magnetic field after the adsorption process. Therefore, the magnetic adsorbent with a high adsorption efficiency and convenient recovery is expected to be effectively used for rapid remediation of radioactive contamination.

Simple Analysis of Lipid Inhibition Activity on an Adipocyte Micro-Cell Pattern Chip.

Polydimethyl-siloxane (PDMS) is often applied to fabricate cell chips. In this study, we fabricated an adipocyte microcell pattern chips using PDMS to analyze the inhibition activity of lipid droplets in mouse embryo fibroblast cells (3T3-L1) with anti-obesity agents. To form the PDMS based micropattern, we applied the micro-contact printing technique using PDMS micro-stamps that had been fabricated by conventional soft lithography. This PDMS micro-pattern enabled the selective growth of 3T3-L1 cells onto the specific region by preventing cell adhesion on the PDMS region. It then allowed growth of the 3T3-L1 cells in the chip for 10 days and confirmed that lipid droplets were formed in the 3T3-L1 cells. After treatment of orlistat and quercetin were treated in an adipocyte micro-cell pattern chip with 3T3-L1 cells for six days, we found that orlistat and quercetin exhibited fat inhibition capacities of 19.3% and 24.4% from 0.2 µM of lipid droplets in 3T3-L1 cells. In addition, we conducted a direct quantitative analysis of 3T3-L1 cell differentiation using Oil Red O staining. In conclusion, PDMS-based adipocyte micro-cell pattern chips may contribute to the development of novel bioactive compounds.

Metabolomics in Radiation-Induced Biological Dosimetry: A Mini-Review and a Polyamine Study.

In this study, we elucidate that polyamine metabolite is a powerful biomarker to study post-radiation changes. Metabolomics in radiation biodosimetry, the application of a metabolomics analysis to the field of radiobiology, promises to increase the understanding of biological responses by ionizing radiation (IR). Radiation exposure triggers a complex network of molecular and cellular responses that impacts metabolic processes and alters the levels of metabolites. Such metabolites have potential as biomarkers for radiation dosimetry. Among metabolites, polyamine is one of many potential biomarkers to estimate radiation response. In addition, this review provides an opportunity for the understanding of a radiation metabolomics in biodosimetry and a polyamine case study.

Porous 3D Prussian blue/cellulose aerogel as a decorporation agent for removal of ingested cesium from the gastrointestinal tract.

In the present study, we successfully synthesized a porous three-dimensional Prussian blue-cellulose aerogel (PB-CA) composite and used it as a decorporation agent for the selective removal of ingested cesium ions (Cs+) from the gastrointestinal (GI) tract. The safety of the PB-CA composite was evaluated through an in vitro cytotoxicity study using macrophage-like THP-1 cells and Caco-2 intestinal epithelial cells. The results revealed that the PB-CA composite was not cytotoxic. An adsorption study to examine the efficiency of the decorporation agent was conducted using a simulated intestinal fluid (SIF). The adsorption isotherm was fitted to the Langmuir model with a maximum Cs+ adsorption capacity of 13.70 mg/g in SIF that followed pseudo-second-order kinetics. The PB-CA composite showed excellent stability in SIF with a maximum Cs+ removal efficiency of 99.43%. The promising safety toxicology profile, remarkable Cs+ adsorption efficacy, and excellent stability of the composite demonstrated its great potential for use as an orally administered drug for the decorporation of Cs+ from the GI tract.

Droplet-Based Microfluidic Reactor for Synthesis of Size-Controlled CdSe Quantum Dots.

CdSe quantum dots (QDs) with a uniform size distribution were synthesized using a droplet-based microfluidic reactor. The droplet-based microfluidic reactor enabled continuous production of CdSe QDs at a temperature of less than 250 °C in an extremely shorter reaction time (less than 30 s) when compared with the batch reactor. The photoluminescence (PL) and ultraviolet (UV) absorption spectra of the CdSe QDs were recorded at different reaction times and the size and optical properties of the QDs were discussed. The structure morphology and elemental composition of the CdSe QDs were determined using a transmission electron microscopy (TEM) and electrondispersive spectroscopy (EDS). The size of CdSe QDs prepared using the microfluidic reactor was estimated to be from 1.6 to 2.6 nm with an average size of 2.2 nm. This droplet-based microfluidic reactor has the potential to be automated system continuous synthesis of CdSe QDs.

Nano-graphene oxide composite for in vivo imaging.

INTRODUCTION: Positron emission tomography (PET) tracers has the potential to revolutionize cancer imaging and diagnosis. PET tracers offer non-invasive quantitative imaging in biotechnology and biomedical applications, but it requires radioisotopes as radioactive imaging tracers or radiopharmaceuticals. METHOD: This paper reports the synthesis of 18F-nGO-PEG by covalently functionalizing PEG with nano-graphene oxide, and its excellent stability in physiological solutions. Using a green synthesis route, nGO is then functionalized with a biocompatible PEG polymer to acquire high stability in PBS and DMEM. RESULTS AND DISCUSSION: The radiochemical safety of 18F-nGO-PEG was measured by a reactive oxygen species and cell viability test. The biodistribution of 18F-nGO-PEG could be observed easily by PET, which suggested the significantly high sensitivity tumor uptake of 18F-nGO-PEG and in a tumor bearing CT-26 mouse compared to the control. 18F-nGO-PEG was applied successfully as an efficient radiotracer or drug agent in vivo using PET imaging. This article is expected to assist many researchers in the fabrication of 18F-labeled graphene-based bio-conjugates with high reproducibility for applications in the biomedicine field.

Cesium-induced inhibition of bacterial growth of Pseudomonas aeruginosa PAO1 and their possible potential applications for bioremediation of wastewater.

Radioactive isotopes and fission products have attracted considerable attention because of their long lasting serious damage to the health of humans and other organisms. This study examined the toxicity and accumulation behavior of cesium towards P. aeruginosa PAO1 and its capacity to remove cesium from waste water. Interestingly, the programmed bacterial growth inhibition occurred according to the cesium environment. The influence of cesium was analyzed using several optical methods for quantitative evaluation. Cesium plays vital role in the growth of microorganisms and functions as an anti-microbial agent. The toxicity of Cs to P. aeruginosa PAO1 increases as the concentration of cesium is increased in concentration-dependent manner. P. aeruginosa PAO1 shows excellent Cs removal efficiency of 76.1% from the contaminated water. The toxicity of cesium on the cell wall and in the cytoplasm were studied by transmission electron microscopy and electron dispersive X-ray analysis. Finally, the removal of cesium from wastewater using P. aeruginosa PAO1 as a potential biosorbent and the blocking of competitive interactions of other monovalent cation, such as potassium, were assessed. Overall, P. aeruginosa PAO1 can be used as a high efficient biomaterial in the field of radioactive waste disposal and management.

In Vitro Studies on a Microfluidic Sensor with Embedded Obstacles Using New Antibacterial Synthetic Compounds (1-TDPPO) Mixed Prop-2-en-1-one with Difluoro Phenyl.

This paper describes the use of an analytical microfluidic sensor for accelerating chemo-repellent response and strong anti-bacterial 1-(Thien-2-yl)-3-(2, 6-difluoro phenyl) prop-2-en-1-one (1-TDPPO). The chemically-synthesized antimicrobial agent, which included prop-2-en-1-one and difluoro phenyl groups, was moving through an optically transparent polydimethylsiloxane (PDMS) microfluidic sensor with circular obstacles arranged evenly. The response, growth and distribution of fluorescent labeling Pseudomonas aeruginosa PAO1 against the antimicrobial agent were monitored by confocal laser scanning microscope (CLSM). The microfluidic sensor along with 1-TDPPOin this study exhibits the following advantages: (i) Real-time chemo-repellent responses of cell dynamics; (ii) Rapid eradication of biofilm by embedded obstacles and powerful antibacterial agents, which significantly reduce the response time compared to classical methods; (iii) Minimal consumption of cells and antimicrobial agents; and (iv) Simplifying the process of the normalization of the fluorescence intensity and monitoring of biofilm by captured images and datasets.

Pd nanospheres decorated reduced graphene oxide with multi-functions: Highly efficient catalytic reduction and ultrasensitive sensing of hazardous 4-nitrophenol pollutant.

We illustrate a facile approach for in situ synthesis of Pd-gum arabic/reduced graphene oxide (Pd-GA/RGO) using GA as the reducing agent, which favors the instantaneous reduction of both Pd ions and GO into Pd nanoparticles (NPs) and RGO. From the morphological analysis of Pd-GA/RGO, we observed highly dispersed spherical 5nm Pd NPs decorated over RGO. The as-synthesized Pd-GA/RGO composite was employed for the catalytic reduction and the electrochemical detection of 4-nitrophenol (4-NP), respectively. The catalytic reduction of 4-NP was highly pronounced for Pd-GA/RGO (5min) when compared to Pd NPs (140min) and Pd/RGO (36min). This enhanced catalytic activity was attributed to the synergistic effect of Pd NPs and the presence of various functional groups of GA. Significantly, the fabricated sensor offered a low detection limit (9fM) with a wider linear range (2-80 pM) and long-term stability. The simple construction technique, high sensitivity, and long-term stability with acceptable accuracy in wastewater samples were the main advantages of the developed sensor. The results indicated that the as-prepared Pd-GA/RGO exhibited better sensing ability than the other graphene-based modified electrodes. Therefore, the proposed sensor can be employed as a more convenient sensing platform for environmental and industrial pollutants.

Development of Synergistic Antimicrobial Coating of p-Aramid Fibers Using Ag Nanoparticles and Glycidyltrimethylammonium Chloride (GTAC) without the Aid of a Cross-Linking Agent.

Functional p-aramid fibers that can express antimicrobial activity were produced by simple processing of silver nanoparticles (AgNPs), which are well known as antimicrobial agents, by using glycidyltrimethylammonium chloride (GTAC), a quaternary ammonium salt. P-aramid fibers were treated with GTAC by the pad-dry-cure process and put into an Ag colloid solution for reactions at 40 °C for 90 min to prepare GTAC/AgNPs-treated p-aramid fibers. Through these processes, GTAC was used as a substitute for existing cross-linking agents. The changes in the degree of attachment of AgNPs to the surface of p-aramid fibers were determined using a scanning electron microscope according to parameters such as GTAC concentration, Ag colloid concentration, and reaction temperature. Through this study, the following results were obtained: (i) The tensile strength of AgNPs/GTAC-treated p-aramid fibers was found to be about 80% of that of untreated p-aramid fibers; (ii) Thermogravimetric analysis showed that the thermal stability of p-aramid fibers did not change much after GTAC/AgNPs treatment and (iii) Antimicrobial activity analysis showed that AgNPs/GTAC-treated p-aramid fibers exhibited superior antibacterial properties compared to untreated p-aramid fibers, which may or may not be the effect of GTAC or AgNPs, or both.

Synergistically strengthened 3D micro-scavenger cage adsorbent for selective removal of radioactive cesium.

A novel microporous three-dimensional pomegranate-like micro-scavenger cage (P-MSC) composite has been synthesized by immobilization of iron phyllosilicates clay onto a Prussian blue (PB)/alginate matrix and tested for the removal of radioactive cesium from aqueous solution. Experimental results show that the adsorption capacity increases with increasing the inactive cesium concentration from 1 ppm to 30 ppm, which may be attributed to greater number of adsorption sites and further increase in the inactive cesium concentration has no effect. The P-MSC composite exhibit maximum adsorption capacity of 108.06 mg of inactive cesium per gram of adsorbent. The adsorption isotherm is better fitted to the Freundlich model than the Langmuir model. In addition, kinetics studies show that the adsorption process is consistent with a pseudo second-order model. Furthermore, at equilibrium, the composite has an outstanding adsorption capacity of 99.24% for the radioactive cesium from aqueous solution. This may be ascribed to the fact that the AIP clay played a substantial role in protecting PB release from the P-MSC composite by cross-linking with alginate to improve the mechanical stability. Excellent adsorption capacity, easy separation, and good selectivity make the adsorbent suitable for the removal of radioactive cesium from seawater around nuclear plants and/or after nuclear accidents.