Solvent diffusion in polymer-embedded hollow nanoparticles studied by in situ small angle X-ray scattering.

In situ time-resolved small-angle X-ray scattering is introduced as a method to monitor the diffusion of a solvent in ceramic hollow nanoparticles (HNPs) supported by a polymer gel scaffold. Changes in the form factor were matched to discrete scattering models. A consecutive reaction kinetic model is used to analyze different stages of solvent diffusion. Rate constants and diffusion coefficients are extracted. By taking the diffusion of low molecular poly(ethylene glycol) in poly(ethylene oxide)-embedded HNPs as a model case, it was found that it took about 0.7 s for the solvent to diffuse through the 6 nm thick shell of HNPs and another 1.2 s to fill the inner cavity, while the diffusion coefficient was of the order of 1018 m2 s-1. The results demonstrate that the method can simultaneously measure solvent penetration into the polymer gel and into embedded sub-100 nm HNPs.

Large Grain-Based Hole-Blocking Layer-Free Planar-Type Perovskite Solar Cell with Best Efficiency of 18.20.

There remains tremendous interest in perovskite solar cells (PSCs) in the solar energy field; the certified power conversion efficiency (PCE) now exceeds 20%. Along with research focused on enhancing PCE, studies are also underway concerning PSC commercialization. It is crucial to simplify the fabrication process and reduce the production cost to facilitate commercialization. Herein, we successfully fabricated highly efficient hole-blocking layer (HBL)-free PSCs through vigorously interrupting penetration of hole-transport material (HTM) into fluorine-doped tin oxide by a large grain based-CH3NH3PbI3 (MAPbI3) film, thereby obtaining a PCE of 18.20%. Our results advance the commercialization of PSCs via a simple fabrication system and a low-cost approach in respect of mass production and recyclability.

Hexagonal ß-NaYF4:Yb(3+), Er(3+) Nanoprism-Incorporated Upconverting Layer in Perovskite Solar Cells for Near-Infrared Sunlight Harvesting.

Hexagonal ß-NaYF4:Yb(3+), Er(3+) nanoprisms, successfully prepared using a hydrothermal method, were incorporated into CH3NH3PbI3 perovskite solar cells (PSCs) as an upconverting mesoporous layer. Due to their near-infrared (NIR) sunlight harvesting, the PSCs based on the upconverting mesoporous layer exhibited a power conversion efficiency of 16.0%, an increase of 13.7% compared with conventional TiO2 nanoparticle-based PSCs (14.1%). This result suggests that the hexagonal ß-NaYF4:Yb(3+), Er(3+) nanoprisms expand the absorption range of the PSC via upconversion photoluminescence, leading to an enhancement of the photocurrent.

Dual-functional CeO2:Eu3+ nanocrystals for performance-enhanced dye-sensitized solar cells.

Single-crystalline, octahedral CeO2:Eu3+ nanocrystals, successfully prepared using a simple hydrothermal method, were investigated to determine their photovoltaic properties in an effort to enhance the light-harvesting efficiency of dye-sensitized solar cells (DSSCs). The size of the CeO2:Eu3+ nanocrystals (300-400 nm), as well as their mirrorlike facets, significantly improved the diffuse reflectance of visible light. Excitation of the CeO2:Eu3+ nanocrystal with 330 nm ultraviolet light was re-emitted via downconversion photoluminescence (PL) from 570 to 672 nm, corresponding to the 5D0→7FJ transition in the Eu3+ ions. Downconversion PL was dominant at 590 nm and had a maximum intensity for 1 mol % Eu3+. The CeO2:Eu3+ nanocrystal-based DSSCs exhibited a power conversion efficiency of 8.36%, an increase of 14%, compared with conventional TiO2 nanoparticle-based DSSCs, because of the strong light-scattering and downconversion PL of the CeO2:Eu3+ nanocrystals.

Nanosilver-decorated TiO2 nanofibers coated with a SiO2 layer for enhanced light scattering and localized surface plasmons in dye-sensitized solar cells.

Enhanced harvesting of visible light is vital to the development of highly efficient dye-sensitized solar cells (DSSCs). Nanosilver-decorated TiO2 nanofibers (Ag@TiO2 NFs) were synthesized by depositing chemically reduced Ag ions onto the surface of electrospun TiO2 nanofibers (TiO2 NFs). The prepared Ag@TiO2 NFs were coated with SiO2 (SiO2@Ag@TiO2 NFs) by using PVP as coupling agent for protecting corrosion of Ag nanoparticle by I(-)/I3(-) solution. The fabricated SiO2@Ag@TiO2 NFs demonstrated a synergistic effect of light scattering and surface plasmons, leading to an enhanced light absorption. Moreover, an anode consisting of SiO2@Ag@TiO2 NFs incorporating TiO2 nanoparticles (NPs) increased light harvesting without substantially sacrificing dye attachment. The power conversion efficiency increased from 6.8 to 8.7 % for a thick film (10 µm), that is, 28 %. These results suggest that SiO2@Ag@TiO2 NFs are promising materials for enhanced light absorption in dye-sensitized solar cells.

Low temperature aqueous phase synthesis of silver/silver chloride plasmonic nanoparticles as visible light photocatalysts.

A one pot and environmentally benign synthetic route for plasmonic photocatalytic Ag@AgCl nanoparticles in a PVA-dissolved aqueous solution system is presented. The synthesized AgCl has a cubic-shape and its edge length can be controlled from ~57 to ~170 nm by varying the reaction temperature. In this system, PVA was used as a stabilizer for the formation of Ag@AgCl nanoparticles through interaction with Ag(+) ions. After partial reduction with l-arginine, the metallic Ag is formed on the surface of the AgCl substrates and the contents of the metallic Ag mainly affect both the visible-light absorption properties and the plasmonic photocatalytic efficiency of the Ag@AgCl nanocomposites. A plausible growth mechanism of metallic silver during the reduction process is proposed. More importantly, it is verified that the size of the AgCl substrate affected the light absorption region of the Ag@AgCl nanocomposite.