Detergent Dissolution Intensification via Energy-Efficient Hydrodynamic Cavitation Reactors.

In this study, we explored the potential of hydrodynamic cavitation (HC) for use in dissolution of liquid and powder detergents. For this, microfluidic and polyether ether ketone (PEEK) tube HC reactors with different configurations were employed, and the results from the reactors were compared with a magnetic stirrer, as well as a tergotometer. According to our results PEEK tube HC reactors present the best performance for dissolution of liquid and powder detergents. In the case of liquid detergent, for the same level of initial concentration and comparable final dissolution, the PEEK tube consumed 16.7 and 70% of the energy and time of a tergotometer and 16.7 and 14.8% of that of a magnetic stirrer, respectively. In the case of powder detergent, the PEEK tube used 12% less power than a tergotometer and 81.2% less power than a magnetic stirrer. Additionally, the time required to dissolve the detergent was reduced significantly from 1200 s in the tergotometer and 1800 s in the magnetic stirrer to just 50 s in the PEEK tube. These results suggest that HC could significantly improve the dissolution rate of liquid and powder detergents and energy consumption in washing machines.

Fundamentals, biomedical applications and future potential of micro-scale cavitation-a review.

Thanks to the developments in the area of microfluidics, the cavitation-on-a-chip concept enabled researchers to control and closely monitor the cavitation phenomenon in micro-scale. In contrast to conventional scale, where cavitation bubbles are hard to be steered and manipulated, lab-on-a-chip devices provide suitable platforms to conduct smart experiments and design reliable devices to carefully harness the collapse energy of cavitation bubbles in different bio-related and industrial applications. However, bubble behavior deviates to some extent when confined to micro-scale geometries in comparison to macro-scale. Therefore, fundamentals of micro-scale cavitation deserve in-depth investigations. In this review, first we discussed the physics and fundamentals of cavitation induced by tension-based as well as energy deposition-based methods within microfluidic devices and discussed the similarities and differences in micro and macro-scale cavitation. We then covered and discussed recent developments in bio-related applications of micro-scale cavitation chips. Lastly, current challenges and future research directions towards the implementation of micro-scale cavitation phenomenon to emerging applications are presented.

Design and fabrication of a vigorous "cavitation-on-a-chip" device with a multiple microchannel configuration.

Hydrodynamic cavitation is one of the major phase change phenomena and occurs with a sudden decrease in the local static pressure within a fluid. With the emergence of microelectromechanical systems (MEMS), high-speed microfluidic devices have attracted considerable attention and been implemented in many fields, including cavitation applications. In this study, a new generation of 'cavitation-on-a-chip' devices with eight parallel structured microchannels is proposed. This new device is designed with the motivation of decreasing the upstream pressure (input energy) required for facile hydrodynamic cavitation inception. Water and a poly(vinyl alcohol) (PVA) microbubble (MB) suspension are used as the working fluids. The results show that the cavitation inception upstream pressure can be reduced with the proposed device in comparison with previous studies with a single flow restrictive element. Furthermore, using PVA MBs further results in a reduction in the upstream pressure required for cavitation inception. In this new device, different cavitating flow patterns with various intensities can be observed at a constant cavitation number and fixed upstream pressure within the same device. Moreover, cavitating flows intensify faster in the proposed device for both water and the water-PVA MB suspension in comparison to previous studies. Due to these features, this next-generation 'cavitation-on-a-chip' device has a high potential for implementation in applications involving microfluidic/organ-on-a-chip devices, such as integrated drug release and tissue engineering.