Neurovascular Compression After the Latarjet Procedure.

The Latarjet procedure is an established and effective option for the treatment of recurrent anterior shoulder instability. Symptomatic compression of the vasculature around the shoulder and adjacent brachial plexus is uncommon and may be difficult to diagnose and treat. The purpose of this report is to describe a patient with neurovascular compression of the axillary artery and brachial plexus after an open Latarjet procedure. This is the first known report of documented combined vascular and neurologic thoracic outlet syndrome after a Latarjet procedure. Evaluation of this suspected problem requires a detailed clinical examination and a dynamic angiogram to verify which neurovascular structures are compressed. Treatment includes decompression of the brachial plexus and axillary vasculature by releasing tethering scar tissue or the remaining pectoralis minor that is creating a constricting sling effect. An arthroscopic approach provides for a careful and specific decompression. Additionally, the authors provide a review of the literature for neurologic complications and management for these complications.

Scapulothoracic fusion: outcomes and complications.

BACKGROUND: Scapulothoracic fusion (STF) may be an option to alleviate pain and restore function. The purpose of this study is to report the clinical outcome of patients who underwent STF for the treatment of painful scapular winging. MATERIALS AND METHODS: From 1999 through 2008, 10 patients (12 shoulders) underwent an STF for painful winging of the scapula. The mean follow-up period was 41 months (range, 8-72 months). Indications for STF included winging in association with excessive medial and/or lateral clavicular resection and facioscapulohumeral dystrophy, as well as scapular winging related to combined long thoracic and spinal accessory nerve palsy. A retrospective review was performed to evaluate the subjective shoulder value, visual analog scale score, range of motion, unions, and complications. RESULTS: There was a statistically significant improvement in the subjective shoulder value, visual analog scale score, range of motion, and satisfaction postoperatively. The overall complication rate was 50% (6 of 12). There were 2 persistent nonunions (2 of 12, 17%), and 50% (6 of 12) of all fusions required subsequent hardware removal because of discomfort. Complications included pleural effusion (3 of 12, 25%), hemopneumothorax (1 of 12, 8%) pulmonary embolus (1 of 12, 8%), and infection (1 of 12, 8%). With the exception of the revision nonunion, all complications resolved with no negative sequelae. CONCLUSION: STF results in improved function and pain relief. STF is associated with a high short-term complication rate with limited long-term sequelae.

Percutaneous balloon humeroplasty for Hill-Sachs lesions: a novel technique.

INTRODUCTION: Hills-Sachs lesions are commonly associated with anterior shoulder dislocations and can be a source of recurrent instability. Studies have shown that, even after soft tissue repair of a Bankart lesion, there is still a risk for redislocation in a patient with significant bony defects. The purpose of this study is to ascertain whether balloon humeroplasty is an effective technique of reducing acute Hill-Sachs defect in a cadaveric model. METHODS: Eighteen cadaveric humerii dissected free of soft tissue were used for this study. Hill-Sachs lesions were created in a reproducible manner in the anatomical posterolateral aspect of the head with a mallet edge. An inflatable balloon tamp (balloon, IBT) was used to reduce the lesion via a small transcortical window. Cement was used to fill the void created by the balloon. We utilized computed tomography (CT) to collect volume data of each humeral head pre- and post-procedure. From this data, we calculated the volume of the Hill-Sachs defect and the percent corrected. A paired t test was performed to analyze the data statistically. RESULTS: The average prereduction Hill-Sachs defect volume was 1515.5 mm(3). The average post-reduction lesion residual volume was 31 mm(3) with 99.3% reduction to the original humeral head volume. The Hill-Sachs lesion reduction was statistically significant with P value of .0004. CONCLUSION: Balloon humeroplasty proved to be an effective technique for reducing Hill-Sachs lesions in a cadaveric model. This technique may be used as an adjunct to arthroscopic versus open Bankart procedure for engaging acute Hill-Sachs lesions.

Reaming as an adjuvant to irrigation on bacterial presence and propagation: an open, cadaveric intramedullary fracture model.

OBJECTIVES: The purpose of this investigation is to evaluate the effect of intramedullary reaming on bacterial presence and propagation in an open, cadaveric intramedullary fracture model. METHODS: Twelve fresh-frozen human cadaveric femurs were osteotomized and inoculated with Staphylococcus aureus, the open, cadaveric intramedullary fracture model. Low-pressure pulsed lavage irrigation was performed to irrigate the osteotomy sites. The specimens were divided into two groups of six paired specimens: CNT, irrigation only; and REAM, irrigation coupled with intramedullary reaming. Intramedullary contents were cultured at the osteotomy site and in 1-cm increments through the distal femoral metaphysis. Mean bacterial colony-forming units were compared between groups using analysis of variance. RESULTS: A statistically significant higher bacterial colony-forming unit count was noted at the osteotomy site (bacterial presence) in the CNT group compared with the REAM group. In terms of bacterial propagation, when compared with the sterile osteotomy site, the CNT group demonstrated significant bacterial propagation only at the 1.1- to 2.0-cm increment and the REAM group demonstrated no significant propagation. In comparing bacterial propagation between the CNT and the REAM groups, no significant differences were noted at any distal increment. CONCLUSION: In this open, cadaveric intramedullary fracture model, low-pressure pulse lavage coupled with intramedullary reaming demonstrated significantly less bacterial presence at the osteotomy site compared with irrigation without reaming. Additionally, intramedullary reaming does not appear to significantly propagate bacteria into the intramedullary canal nor into the distal metaphysis. These observations might have clinical significance.

Meniscus tear developed by pulling of the anomalous insertion of medial meniscus on anterior cruciate ligament.

There is no report regarding a medial meniscus tear arising from an anomalous insertion of medial meniscus on the ACL, which seemed to be developed by the same mechanism as ACL tear. A case of a combined medial meniscus tear with ACL tear in the presence of an anomalous insertion of the medial meniscus on the ACL is reported.

Factors that influence the intra-articular rupture pattern of the ACL graft following single-bundle reconstruction.

PURPOSES: The number of revision anterior cruciate ligament (ACL) surgeries performed annually continues to rise. The purpose of this study was to determine the most common rupture pattern in ACL revision cases after previous single-bundle reconstruction. The second aim was to determine the relationship between rupture pattern and patient-specific factors (age, gender, time between the initial ACL reconstruction and re-injury, and etiology/mechanism of failure) and surgical factors (graft type, tunnel angle). METHODS: This was a cohort study of 60 patients that underwent revision ACL surgery after previous single-bundle ACL reconstruction. Three sports medicine-trained orthopedic surgeons reviewed the arthroscopic videos and determined the rupture pattern of the grafts. The rupture pattern was then correlated to the above-mentioned factors. RESULTS: The inter-observer agreement had a kappa of 0.7. The most common rupture pattern after previous single-bundle ACL reconstruction is elongation of the graft. This is different from the native ACL, which displays more proximal ruptures. With the use of autograft tissue and after a longer period of time, the rupture pattern in revision surgery is more similar to that of the native ACL. CONCLUSION: The most common rupture pattern after previous single-bundle reconstruction was elongation of the graft. Factors that influenced the rupture pattern were months between ACL reconstruction and re-injury and graft type. LEVEL OF EVIDENCE: Cohort study, Level IV.

ACL graft re-rupture after double-bundle reconstruction: factors that influence the intra-articular pattern of injury.

PURPOSE: To determine the most common rupture patterns of previously reconstructed DB-ACL cases, seen at the time of revision surgery, and to determine the influence of age, gender, time between the initial ACL reconstruction and re-injury, tunnel angle and etiology of failure. METHODS: Forty patients who presented for revision surgery after previous double-bundle ACL reconstruction were enrolled. Three orthopedic surgeons independently reviewed the arthroscopic videos and determined the rupture pattern of both the anteromedial and posterolateral grafts. The graft rupture pattern was then correlated with the previously mentioned factors. RESULTS: The most common injury pattern seen at the time of revision ACL surgery was mid-substance AM and PL bundle rupture. Factors that influenced the rupture pattern (proximal vs. mid-substance and distal rupture vs. elongated, but in continuity) were months between ACL reconstruction and re-injury (P = 0.002), the etiology of failure (traumatic vs. atraumatic) (P = 0.025) and the measured graft tunnel angle (P = 0.048). CONCLUSIONS: The most common pattern of graft re-rupture was mid-substance AM and mid-substance PL. As the length of time from the initial DB-ACL reconstruction to revision surgery increased, the pattern of injury more closely resembled that of the native ACL. Evaluation of patients who have undergone double-bundle ACL reconstruction, with a particular focus on graft maturity, mechanism of injury and femoral tunnel angles, and graft rupture pattern assists in preoperative planning for revision surgery.

Biomechanical consequences of a tear of the posterior root of the medial meniscus. Surgical technique.

BACKGROUND: Tears of the posterior root of the medial meniscus are becoming increasingly recognized. They can cause rapidly progressive arthritis, yet their biomechanical effects are not understood. The goal of this study was to determine the effects of posterior root tears of the medial meniscus and their repairs on tibiofemoral joint contact pressure and kinematics. METHODS: Nine fresh-frozen cadaver knees were used. An axial load of 1000 N was applied with a custom testing jig at each of four knee-flexion angles: 0 degrees , 30 degrees , 60 degrees , and 90 degrees . The knees were otherwise unconstrained. Four conditions were tested: (1) intact, (2) a posterior root tear of the medial meniscus, (3) a repaired posterior root tear, and (4) a total medial meniscectomy. Fuji pressure-sensitive film was used to record the contact pressure and area for each testing condition. Kinematic data were obtained by using a robotic arm to record the position of the knees for each loading condition. Three-dimensional knee kinematics were analyzed with custom programs with use of previously described transformations. The measured variables were axial rotation, varus angulation, lateral translation, and anterior translation. RESULTS: In the medial compartment, a posterior root tear of the medial meniscus caused a 25% increase in peak contact pressure compared with that found in the intact condition (p < 0.001). Repair restored the peak contact pressure to normal. No difference was detected between the peak contact pressure after the total medial meniscectomy and that associated with the root tear. The peak contact pressure in the lateral compartment after the total medial meniscectomy was up to 13% greater than that for all other conditions (p = 0.026). Significant increases in external rotation and lateral tibial translation, compared with the values in the intact knee, were observed in association with the posterior root tear (2.98 degrees and 0.84 mm, respectively) and the meniscectomy (4.45 degrees and 0.80 mm, respectively), and these increases were corrected by the repair. CONCLUSIONS: This study demonstrated significant changes in contact pressure and knee joint kinematics due to a posterior root tear of the medial meniscus. Root repair was successful in restoring joint biomechanics to within normal conditions.

Imageless navigation in hip resurfacing: avoiding component malposition during the surgeon learning curve.

BACKGROUND: Studies suggest that hip arthroplasty procedures performed in specialty hospitals or by physicians in practices with a high surgical volume are associated with a decreased rate of adverse outcomes related to component malpositioning. Little is known, however, about the influence of imageless computer navigation systems on the procedural experience of the surgeon and the subsequent alignment of implants in the setting of hip resurfacing arthroplasty. METHODS: Seventy-one consecutive hip resurfacing arthroplasties in which the components were placed with use of computer-assisted navigation were reviewed retrospectively. Intraoperative femoral and acetabular component parameters were compared with postoperative radiographic alignment values. Within this single surgeon series, operative time, intraoperative cup inclination and femoral stem-shaft angles, and postoperative cup inclination and femoral stem-shaft angles were measured and compared over the course of three discrete, sequential operative time periods. Patient demographic data and surgical parameters, including blood loss, surgical approach, and anesthesia time, were recorded. RESULTS: No significant difference was seen between the intraoperative and postoperative cup inclination angles. A significant difference was noted between the intraoperative and postoperative femoral stem-shaft angles; however, the mean angles in all groups had a valgus orientation when compared with the mean native neck angles. Over three sequential operative time periods, computer-assisted navigation produced consistent values with regard to intraoperative cup inclination (43 degrees , 44 degrees , and 40 degrees ) and postoperative radiographic alignment of the cup (46 degrees , 44 degrees , and 43 degrees ) and femoral stem (148 degrees , 147 degrees , and 144 degrees ), despite different levels of surgeon experience. Operative times significantly decreased with surgeon experience, showing the largest decrease after the first sequence interval (110, ninety-eight, and ninety-five minutes, respectively). There was a significant difference with evolving surgeon experience concerning intraoperative stem placement (144 degrees , 142 degrees , and 138 degrees , respectively) despite the mean values remaining well-clustered. No femoral notching occurred throughout the series. CONCLUSIONS: Computer-assisted navigation is a dependable and accurate method of positioning hip resurfacing components during arthroplasty, as measured by cup inclination, and a reliable technique for valgus stem placement and avoidance of notching. Furthermore, computer navigation allows for consistency of component alignment independent of procedural experience.