Bictegravir/emtricitabine/tenofovir alafenamide as first-line treatment in naïve HIV patients in a rapid-initiation model of care: BIC-NOW clinical trial.

OBJECTIVE: Multiple strategies have been utilised to reduce the incidence of HIV, including PrEP and rapid antiretroviral therapy initiation. The study objectives were to evaluate the efficacy, safety, satisfaction, treatment adherence, and system retention obtained with rapid initiation of bictegravir/emtricitabine/tenofovir alafenamide (BIC/FTC/TAF) in naïve patients. METHODS: This phase IV, multicenter, open-label, single-arm, 48-week clinical trial enrolled patients between January 2020 and June 2022. Adherence to treatment was evaluated with the SMAQ questionnaire and patient satisfaction with the EQ-5D. RESULTS: Two hundred eight participants were enrolled with mean age of 35.6 years; 87.6% were males; mean CD4 count was 393.5 cells/uL (<200 cells/uL in 22.1%); viral load log was 5.6 (VL>100 000 cop/mL in 43.3%); 22.6% had AIDS, and 4.3% were coinfected with HBV. BIC/FTC/TAF was initiated on the day of their first visit to the HIV specialist in 98.6% of participants, and 9.6% were lost to follow-up. The efficacy at week 48 was 84.1 % by intention-to- treat (ITT), 94.6% by modified ITT, and 98.3% by per protocol analysis. The regimen was discontinued in two subjects (0.9%) during week 1 for grade 3 adverse events. Treatment adherence (weeks 4 [90%, IQR: 80-99%] vs. 48 [90%, IQR: 80-95%; P = 0.49]) and patient satisfaction (weeks 4 [90%, IQR: 80-99%] vs. 48 [90%, IQR: 80-95 P = 0.49]) rates were very high over the 48- week study period. CONCLUSIONS: BIC/FTC/TAF is an appropriate option for rapid ART initiation in naïve HIV patients, offering high efficacy, safety, durability, treatment adherence, retention in the healthcare system, and patient satisfaction. Number Clinical Trial registration: NCT06177574.

Characterization of emulgels formulated with phycocyanin and diutan gum as a novel approach for biocompatible delivery systems.

Phycocyanin (PC), a protein derived from algae, is non-toxic and biocompatible. Due to its environmental and sustainable properties, it has been studied as an alternative stabilizer for food emulsions. In this sense, the main objective of this work is to evaluate the effectiveness of PC and its use in combination with diutan gum (DG), a biological macromolecule, to prepare emulgels formulated with avocado oil. Z-potential measurements show that the optimum pH for working with PC is 2.5. Furthermore, the system exhibited a structured interface at this pH. The surface tension did not decrease further above 1.5 wt% PC. Interestingly, emulsions formulated with >1.5 wt% PC showed recoalescence immediately after preparation. Although 1.5 wt% had the smallest droplet size, this emulsion underwent creaming due to the low viscosity of the system. DG was used in combination with PC to increase viscosity and reduce creaming. As little as 0.1 wt% DG was sufficient to form an emulgel when incorporated into the previous emulsion, which exhibited pseudoplastic behaviour and viscoelastic properties with very low creaming rates. However, the use of PC in combination with DG resulted in a non-aggregated and stable emulgel with 1.5 wt% PC and 0.1 wt% DG.

Effect of different crosslinking agents on hybrid chitosan/collagen hydrogels for potential tissue engineering applications.

Tissue engineering (TE) demands scaffolds that have the necessary resistance to withstand the mechanical stresses once implanted in our body, as well as excellent biocompatibility. Hydrogels are postulated as interesting materials for this purpose, especially those made from biopolymers. In this study, the microstructure and rheological performance, as well as functional and biological properties of chitosan and collagen hydrogels (CH/CG) crosslinked with different coupling agents, both natural such as d-Fructose (F), genipin (G) and transglutaminase (T) and synthetic, using a combination of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride with N-hydroxysuccinimide (EDC/NHS) will be assessed. FTIR tests were carried out to determine if the proposed crosslinking reactions for each crosslinking agent occurred as expected, obtaining positive results in this aspect. Regarding the characterization of the properties of each system, two main trends were observed, from which it could be established that crosslinking with G and EDC-NHS turned out to be more effective and beneficial than with the other two crosslinking agents, producing significant improvements with respect to the base CH/CG hydrogel. In addition, in vitro tests demonstrated the potential application in TE of these systems, especially for those crosslinked with G, T and EDC-NHS.

Characterization of Gelatin-Polycaprolactone Membranes by Electrospinning.

New advances in materials science and medicine have enabled the development of new and increasingly sophisticated biomaterials. One of the most widely used biopolymers is polycaprolactone (PCL) because it has properties suitable for biomedical applications, tissue engineering scaffolds, or drug delivery systems. However, PCL scaffolds do not have adequate bioactivity, and therefore, alternatives have been studied, such as mixing PCL with bioactive polymers such as gelatin, to promote cell growth. Thus, this work will deal with the fabrication of nanofiber membranes by means of the electrospinning technique using PCL-based solutions (12 wt.% and 20 wt.%) and PCL with gelatin (12 wt.% and 8 wt.%, respectively). Formic acid and acetic acid, as well as mixtures of both in different proportions, have been used to prepare the preliminary solutions, thus supporting the electrospinning process by controlling the viscosity of the solutions and, therefore, the size and uniformity of the fibers. The physical properties of the solutions and the morphological, mechanical, and thermal properties of the membranes were evaluated. Results demonstrate that it is possible to achieve the determined properties of the samples with an appropriate selection of polymer concentrations as well as solvents.

Agro-Waste Sweet Pepper Extract-Magnetic Iron Oxide Nanoparticles for Antioxidant Enrichment and Sustainable Nanopackaging.

This study synthesizes magnetic iron oxide nanoparticles from agro-waste sweet pepper extract, exploring their potential as antioxidant additives and in food preservation. Iron (III) chloride hexahydrate is the precursor, with sweet pepper extract as both a reducing and capping agent at pH 7.5. Characterization techniques, including microscopy and spectroscopy, analyze the sweet pepper extract-magnetic iron oxide nanoparticles. Antioxidant capacities against 2,2-diphenyl-1-picrylhydrazyl are assessed, incorporating nanoparticles into banana-based bioplastic for grape preservation. Microscopy reveals cubic and quasi-spherical structures, and spectroscopy confirms functional groups, including Fe-O bonds. X-ray diffraction identifies cubic and monoclinic magnetite with a monoclinic hematite presence. Sweet pepper extract exhibits 100% inhibitory activity in 20 min, while sweet pepper extract-magnetic iron oxide nanoparticles show an IC50 of 128.1 µg/mL. Furthermore, these nanoparticles, stabilized with banana-based bioplastic, effectively preserve grapes, resulting in a 27.4% lower weight loss rate after 144 h compared to the control group (34.6%). This pioneering study encourages institutional research into the natural antioxidant properties of agro-waste sweet pepper combined with magnetic iron and other metal oxide nanoparticles, offering sustainable solutions for nanopackaging and food preservation. Current research focuses on refining experimental parameters and investigating diverse applications for sweet pepper extract-magnetic iron oxide nanoparticles in varied contexts.

Injectable Thermoresponsive Microparticle/Hydrogel System with Superparamagnetic Nanoparticles for Drug Release and Magnetic Hyperthermia Applications.

Cancer is a disease that continues to greatly impact our society. Developing new and more personalized treatment options is crucial to decreasing the cancer burden. In this study, we combined magnetic polysaccharide microparticles with a Pluronic thermoresponsive hydrogel to develop a multifunctional, injectable drug delivery system (DDS) for magnetic hyperthermia applications. Gellan gum and alginate microparticles were loaded with superparamagnetic iron oxide nanoparticles (SPIONs) with and without coating. The magnetic microparticles' registered temperature increases up to 4 °C upon the application of an alternating magnetic field. These magnetic microparticles were mixed with drug-loaded microparticles, and, subsequently, this mixture was embedded within a Pluronic thermoresponsive hydrogel that is capable of being in the gel state at 37 °C. The proposed DDS was capable of slowly releasing methylene blue, used as a model drug, for up to 9 days. The developed hydrogel/microparticle system had a smaller rate of drug release compared with microparticles alone. This system proved to be a potential thermoresponsive DDS suitable for magnetic hyperthermia applications, thus enabling a synergistic treatment for cancer.

Increased vertebral canal diameter measured by ultrasonography as a sign of vasculitis in patients with giant cell arteritis.

Introduction: The diagnosis of giant cell arteritis (GCA) by ultrasonography including large vessels, apart from the temporal artery increases the sensibility of the study and informs about the risk of specific complications. However, there is less information about the study of these arteries, whose affection carries higher proportion of severe complications. Objectives: To describe and analyze the value of the diameter of the cervical vertebral canal of the vertebral artery (VA) as a sign of vertebral vasculitis (VV) related to GCA and estimate the risk of stroke complications. Materials and methods: Observational study of a population that includes patients with GCA with and without VA vasculitis as well as healthy subjects. We evaluated whether there were differences in VA diameter in the groups and, if so, we estimated the diagnostic capacity of the variable that best defines VA diameter using a ROC curve. Cut-off points with their associated reliability chosen thereafter. Results: There were 347 subjects included:107 with GCA of whom 37 had vertebral vasculitis, 240 healthy controls. In patients with GCA and VV, the VA diameter was increased (No GCA 3.4 mm, GCA without VV 3.6 mm, GCA with VV 5.2 mm p < 0.01). According to the ROC curves, the variable defining vertebral diameter with best diagnostic accuracy is the sum of both sides (area under the curve of 0.98). With a cut-off point of 8.45 mm, the reliability values are: sensitivity 94.1%, specificity 94.5%, PPV 82.1% and NPV 98.4%. With a cut-off point of 9.95 mm, the sensitivity is 52.9% and the specificity is 100%. Likewise, VA diameter is independently associated with the presence of stroke in the vertebrobasilar territory (OR 1.6, range 1.2-2.2). Conclusion: The VA diameter, measured as the sum of both sides, is an objectively measurable sign with very high reliability for detect vertebral vasculitis in patients with GCA. It is proposed here as a novel echographic sign, which can aid the detection of the involvement of an artery where the complications are especially serious.

Evaluation of rice bran varieties and heat treatment for the development of protein/starch-based bioplastics via injection molding.

Improper management of disposable plastics and resource depletion pose significant environmental challenges, prompting interest in alternatives like bioplastics. These novel materials can be produced from by-products of the agro-food industry, offering solutions and valorizing waste. Rice bran, a substantial by-product of rice processing, is abundant and cost-effective, rich in proteins and starch. These components can be transformed into industrial-grade bioplastics through proper processing. This study evaluates the impact of rice bran varieties and thermal treatment during processing on bioplastic development for injection molding. After defatting and sieving, rice bran was mixed with glycerol and subjected to injection molding at 150 °C. Results indicate that parboiled systems, especially from japonica rice bran, showed high viscoelastic moduli and tensile strength. These systems exhibited a denser structure, resulting in lower water absorption. This research sheds light on the connection between rice bran variety, heat treatment, and the final properties of derived bioplastics. This research contributes significantly to understand the relationship between the variety of rice bran and the impact of heat treatment on the ultimate properties of the derived bioplastics.

Sustainable Nanomagnetism: Investigating the Influence of Green Synthesis and pH on Iron Oxide Nanoparticles for Enhanced Biomedical Applications.

This study comprehensively analyzed green nanomagnetic iron oxide particles (GNMIOPs) synthesized using a green method, investigating their size, shape, crystallinity, aggregation, phase portions, stability, and magnetism. The influence of pH and washing solvents on the magnetic properties of the nanoparticles and their incorporation into PCL membranes was examined for biomedical applications. Polyphenols were utilized at different pH values (1.2, 7.5, and 12.5), with washing being performed using either ethanol or water. Characterization techniques, including XRD, SEM, TEM, FTIR, and VSM, were employed, along with evaluations of stability, magnetic properties, and antioxidant activity. The findings indicate that both pH levels and the washing process exert a substantial influence on several properties of NMIOPs. The particle sizes ranged from 6.6 to 23.5 nm, with the smallest size being observed for GNMIOPs prepared at pH 12.5. Higher pH values led to increased crystallinity, cubic Fe3O4 fractions, and reduced crystalline anisotropy. SEM and TEM analyses showed pH-dependent morphological variations, with increased aggregation being observed at lower pH values. GNMIOPs displayed exceptional magnetic behavior, with the highest saturation magnetization being observed in GNMIOPs prepared at pH 7.5 and 12.5 and subsequently washed with ethanol. The zeta potential measurements indicated a stability range for GNMIOPs spanning from -31.8 to -41.6 mV, while GNMIOPs synthesized under high-pH conditions demonstrated noteworthy antioxidant activity. Furthermore, it was explored how pH and washing solvent affected the morphology, roughness, and magnetic properties of GNMIOP-infused nanofiber membranes. SEM showed irregularities and roughness due to GNMIOPs, varying with pH and washing solvent. TEM confirmed better dispersion with ethanol washing. The magnetic response was stronger with ethanol-washed GNMIOPs, highlighting the influence of pH and washing solvent on membrane characteristics.

Quantifying the Structure and Properties of Nanomagnetic Iron Oxide Particles for Enhanced Functionality through Chemical Synthesis.

This comprehensive study investigates the properties of chemical nanomagnetic iron oxide particles (CNMIOPs) synthesized through a chemical method. The primary objective is to examine how pH levels and washing solvents affect the magnetism properties of these nanoparticles. Three different pH levels (1.2, 7.5, and 12.5) using NaOH and two washing solvents (ethanol and water) are employed. The characterization techniques include FTIR, SEM, TEM, XRD, ZSP, and VSM. Furthermore, the study incorporates two specific pH- and solvent-dependent CNMIOPs into PCL electrospun materials to analyze their performance in a targeted application. The results show that pH and the washing process significantly affect the CNMIOPs' properties. Higher pH levels result in smaller particles with higher crystallinity and reduce crystalline anisotropy. SEM and TEM analysis confirm different morphologies, including cubic, spherical, and elongated shapes. Ethanol-washed CNMIOPs exhibit superior magnetic behavior, with the highest magnetization saturation at pH 12.5 (Ms = 58.3 emu/g). The stability of the CNMIOPs ranges from -14.7 to -23.8 mV, and higher pH levels exhibit promising antioxidant activity. Furthermore, the study explores the effects of pH and washing solvents on CNMIOP-infused nanofiber membranes, with better dispersion observed with ethanol washing. Overall, this research provides valuable insights into the properties and behavior of CNMIOPs under varying pH and washing conditions.

Valorization of Honduran Agro-Food Waste to Produce Bioplastics.

The development of biodegradable plastics and eco-friendly biomaterials derived from renewable resources is crucial for reducing environmental damage. Agro-industrial waste and rejected food can be polymerized into bioplastics, offering a sustainable solution. Bioplastics find use in various industries, including for food, cosmetics, and the biomedical sector. This research investigated the fabrication and characterization of bioplastics using three types of Honduran agro-wastes: taro, yucca, and banana. The agro-wastes were stabilized and characterized (physicochemically and thermically). Taro flour presented the highest protein content (around 4.7%) and banana flour showed the highest moisture content (around 2%). Furthermore, bioplastics were produced and characterized (mechanically and functionally). Banana bioplastics had the best mechanical properties, with a Young's modulus around 300 MPa, while taro bioplastics had the highest water-uptake capacity (200%). In general, the results showed the potential of these Honduran agro-wastes for producing bioplastics with different characteristics that could add value to these wastes, promoting the circular economy.

Stabilization and Valorization of Beer Bagasse to Obtain Bioplastics.

Beer bagasse is a residue produced in large quantities, though it is undervalued in the industry. Its high protein and polysaccharide content make it attractive for use in sectors such as the manufacture of bioplastics. However, its high water content makes it necessary to stabilize it before being considered as a raw material. The main objective of this work was to evaluate the stabilization of beer bagasse and the production of bioplastics from it. In this sense, different drying methods (freeze-drying and heat treatment at 45 and 105 °C) were studied. The bagasse was also characterized physicochemically to evaluate its potential. In addition, bagasse was used in combination with glycerol (plasticizer) to make bioplastics by injection molding, analyzing their mechanical properties, water absorption capacity and biodegradability. The results showed the great potential of bagasse, presenting a high content of proteins (18-20%) and polysaccharides (60-67%) after its stabilization, with freeze-drying being the most suitable method to avoid its denaturation. Bioplastics present appropriate properties for use in applications such as horticulture and agriculture.

Expression profile of microRNAs related with viral infectivity, inflammatory response, and immune activation in people living with HIV.

Objective: To evaluate the serum expression of microRNAs (miRNAs) with ability to modulate the human immunodeficiency (HIV) replication or inflammatory status in people living with HIV (PLWH). Methods: Forty healthy controls and two groups of PLWH were evaluated: (a) Group 1 (n = 30), patients with detectable viral load at inclusion, analyzed before receiving antiretroviral therapy (ART) and 12 months after initiating it; (b) Group 2 (n = 55), PLWH with prolonged undetectable viral load. Intestinal barrier disruption (I-FABP) and bacterial translocation (16S rDNA) markers, inflammatory markers such as interleukin (IL)-6 and sCD163, immune activation and expression of specific miRNAs were evaluated. Results: Serum concentrations of I-FABP, 16S rDNA, IL-6, sCD163 and activated T lymphocytes were increased in PLWH. Serum miR-34a was overexpressed at inclusion and remained elevated after ART. The expression of the remaining miRNAs that modulate HIV infectivity (miR-7, mir-29a, miR-150, and miR-223) was similar in PLWH and controls. Related to miRNAs implicated in inflammation (miR-21, miR-155, and miR-210), significant overexpression were observed in miR-21 and miR-210 levels in untreated PLWH, but levels were restored in those patients treated for a long period. Conclusion: A sustained overexpression of miR-34a was detected even after prolonged HIV controlled replication. miR-21 and miR-210 can be considered new markers of inflammation with high sensitivity to its modifications.

Effect of Calcination Temperature and Time on the Synthesis of Iron Oxide Nanoparticles: Green vs. Chemical Method.

Nowadays, antioxidants and antibacterial activity play an increasingly vital role in biosystems due to the biochemical and biological reactions that involve free radicals and pathogen growth, which occur in many systems. For this purpose, continuous efforts are being made to minimize these reactions, including the use of nanomaterials as antioxidants and bactericidal agents. Despite such advances, iron oxide nanoparticles still lack knowledge regarding their antioxidant and bactericidal capacities. This includes the investigation of biochemical reactions and their effects on nanoparticle functionality. In green synthesis, active phytochemicals give nanoparticles their maximum functional capacity and should not be destroyed during synthesis. Therefore, research is required to establish a correlation between the synthesis process and the nanoparticle properties. In this sense, the main objective of this work was to evaluate the most influential process stage: calcination. Thus, different calcination temperatures (200, 300, and 500 °C) and times (2, 4, and 5 h) were studied in the synthesis of iron oxide nanoparticles using either Phoenix dactylifera L. (PDL) extract (green method) or sodium hydroxide (chemical method) as the reducing agent. The results show that calcination temperatures and times had a significant influence on the degradation of the active substance (polyphenols) and the final structure of iron oxide nanoparticles. It was found that, at low calcination temperatures and times, the nanoparticles exhibited small sizes, fewer polycrystalline structures, and better antioxidant activities. In conclusion, this work highlights the importance of green synthesis of iron oxide nanoparticles due to their excellent antioxidant and antimicrobial activities.

Optoelectronic Pressure Sensor Based on the Bending Loss of Plastic Optical Fibers Embedded in Stretchable Polydimethylsiloxane.

We report the design and testing of a sensor pad based on optical and flexible materials for the development of pressure monitoring devices. This project aims to create a flexible and low-cost pressure sensor based on a two-dimensional grid of plastic optical fibers embedded in a pad of flexible and stretchable polydimethylsiloxane (PDMS). The opposite ends of each fiber are connected to an LED and a photodiode, respectively, to excite and measure light intensity changes due to the local bending of the pressure points on the PDMS pad. Tests were performed in order to study the sensitivity and repeatability of the designed flexible pressure sensor.

Soy Protein Isolate as Emulsifier of Nanoemulsified Beverages: Rheological and Physical Evaluation.

The production of biologically active molecules or the addition of new bioactive ingredients in foods, thereby producing functional foods, has been improved with nanoemulsion technology. In this sense, the aim of this work was to develop nanoemulsified beverages as potential candidates for the encapsulation of bioactive compounds, whose integrity and release across the intestinal tract are controlled by the structure and stability of the interfaces. To achieve this, firstly, a by-product rich-in protein has been evaluated as a potential candidate to act as an emulsifier (chemical content, amino acid composition, solubility, ζ-potential and surface tension were evaluated). Later, emulsions with different soy protein isolate concentrations (0.5, 1.0, 1.5 and 2.0 wt%), pH values (2, 4, 6 and 8) and homogenization pressures (100, 120 and 140 PSI) were prepared using a high-pressure homogenizer after a pre-emulsion formation. Physical (stability via Backscattering and drop size evolution) and rheological (including interfacial analysis) characterizations of emulsions were carried out to characterize their potential as delivery emulsion systems. According to the results obtained, the nanoemulsions showed the best stability when the protein concentration was 2.0 wt%, pH 2.0 and 120 PSI was applied as homogenization pressure.

Type-A Gelatin-Based Hydrogel Infiltration and Degradation in Titanium Foams as a Potential Method for Localised Drug Delivery.

A gelatin-based hydrogel was infiltrated and degraded-released in two different titanium foams with porosities of 30 and 60 vol.% (Ti30 and Ti60 foams) and fabricated by the space holder technique to evaluate its potential to act as an innovative, alternative, and localised method to introduce both active pharmaceutical ingredients, such as antibiotics and non-steroidal anti-inflammatory drugs, and growth factors, such as morphogens, required after bone-tissue replacement surgeries. In addition, the kinetic behaviour was studied for both infiltration and degradation-release processes. A higher infiltration rate was observed in the Ti60 foam. The maximum infiltration hydrogel was achieved for the Ti30 and Ti60 foams after 120 min and 75 min, respectively. Further, both processes followed a Lucas-Washburn theoretical behaviour, typical for the infiltration of a fluid by capillarity in porous channels. Regarding the subsequent degradation-release process, both systems showed similar exponential degradation performance, with the full release from Ti60 foam (80 min), versus 45 min for Ti30, due to the greater interconnected porosity open to the surface of the Ti60 foam in comparison with the Ti30 foam. In addition, the optimal biocompatibility of the hydrogel was confirmed, with the total absence of cytotoxicity and the promotion of cell growth in the fibroblast cells evaluated.

Biopolymer-Based Films Reinforced with Green Synthesized Zinc Oxide Nanoparticles.

Nowadays, biopolymer-based films are being developed as an alternative to conventional plastic-based films, mainly because they are non-toxic, flexible, inexpensive, and widely available. However, they are restricted in their applications due to several deficiencies in their properties. Accordingly, the reinforcement of these materials with nanoparticles/nanofillers could overcome some of their shortcomings, especially those processed by green methods. Green synthesized zinc oxide nanoparticles (ZnO-NPs) are highly suggested to overcome these deficiencies. Therefore, the main aim of this work was to develop different biopolymer-based films from cellulose acetate (CA), chitosan (CH), and gelatin (GE) reinforced with ZnO-NPs prepared by casting, and to assess their different properties. The results show the improvements produced by the incorporation of ZnO-NPs (1% w/w) into the CA, CH, and GE systems. Thus, the water contact angles (WCAs) increased by about 12, 13, and 14%, while the water vapor permeability (WVP) decreased by about 14, 6, and 29%, the water solubility (WS) decreased by about 23, 6, and 5%, and the transparency (T) increased by about 19, 31, and 20% in the CA, CH, and GE systems, respectively. Furthermore, the mechanical properties were enhanced by increasing the ultimate tensile strength (UTS) (by about 39, 13, and 26%, respectively) and Young's modulus (E) (by about 70, 34, and 63%, respectively), thereby decreasing the elongation at the break (εmax) (by about 56, 23, and 49%, respectively) and the toughness (by about 50, 4, and 30%, respectively). Lastly, the antioxidant properties were enhanced by 34, 49, and 39%, respectively.

Biopolymer-Based Films Reinforced with FexOy-Nanoparticles.

Nowadays, natural polymer-based films are considered potentially environmentally friendly alternatives to conventional plastic films, due to many advantageous properties, including their easy processability, high flexibility, non-toxicity, low cost, high availability, and environmental safety. However, they are limited in their application by a number of shortcomings, including their high water solubility and vapor permeability as well as their poor opacity and low mechanical resistance. Thus, nanoparticles, such as green FexOy-NPs, can be used to overcome the drawbacks associated with these materials. Therefore, the aim of this study was to develop three different polymer-based films (gelatin-based, cellulose acetate-based and chitosan-based films) containing green synthesized FexOy-NPs (1.0% w/w of the initial polymer weight) as an additive to improve film properties. This was accomplished by preparing the different films using the casting method and examining their physicochemical, mechanical, microstructural, and functional characteristics. The results show that the incorporation of FexOy-NPs into the different films significantly enhanced their physicochemical, mechanical, and morphological properties as well as their antioxidant characteristics. Consequently, it was possible to produce suitable natural polymer-based films with potential applications across a wide range of industries, including functional packaging for food, antioxidants, and antimicrobial additives for pharmaceutical and biomedical materials as well as pesticides for agriculture.

A new inactivated Tritrichomonas foetus vaccine that improves genital clearance of the infection and calving intervals in cattle.

Bovine trichomonosis is a sexually transmitted disease that is a primary cause of early reproductive failure in cattle. The aim of the present study was to develop a vaccine formulation based on Tritrichomonas foetus trophozoites inactivated by lyophilization and Quil-A-adjuvanted. The safety, immunogenicity and efficacy of this new vaccine formulation (Trichobovis®) administered by two routes (subcutaneous: SC, and intravulvar: IVU) were compared with a commercial vaccine (TrichGuard®) in a well-established experimental bovine model of genital T. foetus infection. The new vaccine was considered safe in cattle because only mild local reactions were found in the vaccination area, which disappeared 3 weeks after administration. Cows immunized with Trichobovis cleared the infection faster than the non-immunized/challenged group (27-28 vs. 60 days; P < 0.05). Not significant differences were observed with the commercial vaccine respect to the positive control group, or between SC and IVU routes. The new vaccine stimulated high serum anti-T. foetus IgG and genital IgA levels and generated an IgG booster effect similar to TrichGuard. IgA levels were associated with significantly earlier genital clearance of T. foetus in cows immunized with Trichobovis by SC route (G1A) or TrichGuard (G2). The strongest association was found in the group G1A on day 14 post-infection (p.i.) (r = -0.74) and in G2 on day 35 p.i. (r = -0.71). The efficacy of vaccination using Trichobovis on the reproductive performance was also investigated under field conditions in a herd where T. foetus was present. The calving intervals were significantly reduced by 45.2 days (P < 0.05), calves were born 28 days earlier (P < 0.05) and an increase of 8.7% in the calving rate (P > 0.05) was observed in the vaccinated group. These results demonstrate that Trichobovis improved the reproductive performance under field conditions in herds where T. foetus infection is present.