RESUMEN
Ultrasonic (USC) treatments have been applied to starches, flours and grains to modify their physicochemical properties and improve their industrial applicability. The extent of the modification caused by USC treatment depends on the treatment conditions and the natural characteristics of the treated matter. Cavitation leads to structural damage and fragmentation and partial depolymerization of starch components. The amorphous regions are more susceptible to being disrupted by ultrasonication, while the crystalline regions require extended USC exposure to be affected. The increased surface area in USC-treated samples has a higher interaction with water, resulting in modification of the swelling power, solubility, apparent viscosity, pasting properties and gel rheological and textural properties. Starch digestibility has been reported to be modified by ultrasonication to different extents depending on the power applied. The most important treatment variables leading to more pronounced modifications in USC treatments are the botanical origin of the treated matter, USC power, time, concentration and temperature. The interaction between these factors also has a significant impact on the damage caused by the treatment. The molecular rearrangement and destruction of starch structures occur simultaneously during the USC treatment and the final properties of the modified matrix will depend on the array of treatment parameters. This review summarizes the known effects of ultrasonic treatments in modifying starches, flours and grains.
RESUMEN
The increasing use of hempseed in food products highlights the need for a comprehensive database for scientific research and industrial applications. In food development, information about the techno-functional properties of raw materials plays a crucial role in determining the suitability of each product for specific applications. Thus, this study aims to characterise three hempseed varieties (Ferimon, Henola and Uso-31), comparing their physicochemical and nutritional compositions. Moreover, the study investigates the impact of hempseed varieties on the techno-functional, physical and thermal properties of the partially defatted hempseed flours (PDHFs) obtained from single screw pressing (SSP) oil extraction. The fatty acid and tocopherol profiles of the dehulled seeds and oil were also analysed. Significant variations in yield and physical properties were observed among hempseed varieties, influenced by genetics, adaptation to agro-climatic conditions and cultivation systems. Despite its lower yield (kg/ha), Uso-31 exhibited superior 1000-seed weight, dehulling yield and larger mean seed size (1.79 ± 0.02 mm). Hempseed oil was rich in unsaturated fatty acids, particularly linoleic (51.2-53.4 g/100 g oil) and α-linolenic (14.88-18.97 g/100 oil) acids, showing variations in γ- and α-tocopherols depending on the variety. The variety also influenced the least gelation concentration (LGC) and techno-functional properties such as water absorption capacity (WAC), emulsifying activity (EA) and emulsion stability (ES). SDS-PAGE and DSC measurements indicated the presence of 11S and 7S globulin proteins with denaturation temperatures above 87.8 °C. These findings confirm that the studied hempseed flours are valuable techno-functional and nutritional ingredients suitable for sustainable food formulations.
RESUMEN
The Ethiopian potato (Plectranthus edulis) is an annual tuber crop indigenous to Ethiopia. The crop is underutilized and not much studied despite its high yield of starch, which has a good potential to contribute to the effort in meeting the quickly growing demand for starch. In this study, the effects of the ecotype and isolation methods on the physicochemical, functional, structural, and crystalline properties of starches were evaluated. Starches were isolated from two Ethiopian potato ecotypes (Loffo and Chanqua) using distilled water (DW), 0.01% sodium metabisulphite (SMS), and 1M sodium chloride (NaCl) in the isolation media. The results showed that the lowest starch yield was obtained from Chanqua using DW (97.4%), while the maximum was from Loffo using SMS (99.3%). The L* (lightness) and whiteness values of the starches obtained from Loffo were higher than those of Chanqua starches, with NaCl and SMS extractants yielding the highest values. The bulk density, water activity (aw), pH, proximate composition (moisture content, protein, ash, fat, crude fiber, and carbohydrate contents), and techno-functional properties were established. The majority of these parameters varied depending on both the isolation method and the ecotype. The crystallinity pattern of all starches showed B-type diffraction, with differences in diffraction peak intensities between all starches. FTIR tests showed structural changes as a function of the ecotype and isolation procedure used. The Loffo ecotype exhibited considerably better results, and the SMS isolation method was found to be the most effective way to acquire the highest starch quality in most of the characteristics evaluated.
Asunto(s)
Plectranthus , Solanum tuberosum , Almidón/química , Solanum tuberosum/química , Ecotipo , Cloruro de Sodio , Agua , Amilosa/químicaRESUMEN
The impact of microwave (MW) treatments on the structure, solubility, and techno-functional properties of the proteins in starchy matrices is still poorly understood. This study aimed to investigate the effects of MW intensity by applying 1, 2, and 6 min of radiation on two tef flour varieties moistened at 15 % and 25 %. The fractionation method recovered â¼83 % of the total protein content in untreated flours. The interaction between treatment time and moisture content (MC) significantly influenced the extraction of protein fractions. Samples treated at 25 %MC showed significant reductions in albumins (up to -74 %), globulins (up to -79 %), and prolamins (up to -32 %). The SDS-extractable proteins of both tef flours presented similar molecular weights (12-100 kDa). SDS-PAGE analysis revealed decreased band intensity in MW-treated samples compared to untreated flours, and confocal analysis showed changes in the native state of proteins in treated samples. Shorter treatments at low MC significantly improved the emulsifying stability of tef flours, particularly in brown tef flour, with an enhancement of up to 203 %. The hydration properties significantly increased in flours treated at 25 %MC for 6 min. Pearson correlation analysis demonstrated the influence of treatment time and MC on protein recovery and functional properties of tef flours.
Asunto(s)
Harina , Microondas , Harina/análisis , Fenómenos Químicos , Almidón/química , SolubilidadRESUMEN
Anchote is a tuber crop indigenous to Ethiopia. Starch hydration properties and important gel characteristics which include: color, gel rheological properties (at 2, 4, 6, 8, and 10% starch:water w/w) and gel texture evolution (at 10% starch:water w/w), during 0 to 192 h storage (at 4 °C), of anchote starches isolated from four anchote cultivars (Desta 01, Desta 24, white and red) were evaluated and compared with potato and cassava starches (PS and CS). The lightness (L*) and whiteness scores of the anchote starch ranged up to >95, with slight differences among the cultivars, making them pure starches. Swelling power (SP) and water solubility index (WSI) of the anchote starches increased with increasing cooking temperature (40, 50, 60, 70, 80 and 90 °C), and their rate of increase varied significantly with the control starches, as follows: CS < anchote starches < PS. Anchote starch gels resisted higher stresses before breaking their structure and showed higher elasticity with lower (tan δ)1 values than PS and CS gels. They also had greater viscoelastic moduli even at lower concentrations than the PS and CS gels, and their stability increased with increasing concentration. The study of the gels' texture evolution during storage revealed that anchote starch gels had significantly higher (≥40%) initial and final (after 192 h) hardness and were less adhesive than the PS gel. Despite some significant differences in the studied starch gel quality parameters among the starches from the anchote cultivars, the results suggested their promising potential as additional new materials in the development of food products, specifically as a functional ingredient for the formulation of gel-like products.
RESUMEN
Bread is a widely consumed food that has often been used as a vehicle for functional ingredients such as dietary fibre. Fibre-rich breads have beneficial physiological effects on health, helping to combat chronic pathologies such as cardiovascular disease, diabetes, and certain types of colon cancer. The aim of this study is to evaluate the technological and nutritional effects of the inclusion of buckwheat hull particles (BH) at two addition levels (3 and 6%) and two particle sizes (fine, D50: 62.7 µm; coarse, D50: 307 µm) in a gluten-free (GF) bread formulation. A significant (p < 0.05) increase in the dough elastic modulus (G') was observed for all doughs containing BH, from 712 Pa for a rice-based dough to 1027-3738 Pa for those containing BH. Compared to rice-based breads, those containing BH showed a significant (p < 0.05) increase in total dietary fibre content (from three to five times) and in antioxidant capacity (from 78 to 290 mg TE/100 g dw. in the ORAC test). Breads containing fine BH at a level of 3% had similar sensory properties to the rice-based bread, demonstrating that it is possible to improve the TDF content while maintaining the sensory quality of the GF bread.
RESUMEN
The pasting and rheological properties of starch gels from different botanical origins have been widely used to evaluate the application of these starches in pharmaceutical and food products. However, the ways in which these properties are modified by starch concentration and their dependence on amylose content and thermal and hydration properties have not been adequately established so far. An exhaustive study of the pasting and rheological properties of starch gels (maize and rice (normal and waxy in both cases), wheat, potato, and tapioca) at concentrations of 6.4, 7.8, 9.2, 10.6, and 11.9 g/100 g was performed. The results were evaluated in terms of a potential equation fit between each parameter and each gel concentration. The parameters determined for the gels at the studied concentrations were correlated with the hydration properties and thermal properties by applying principal component analysis (PCA). Wheat starch, followed by normal maize and normal rice starches, presented a greater capacity to modulate their gels' pasting and viscoelastic properties via their concentration in water. On the contrary, the characteristics of waxy rice and maize, potato, and tapioca starches were barely modified by concentration in pasting assays, but the gels of potato and tapioca showed noticeable changes in their viscoelastic properties as functions of concentration. In the PCA plot, the non-waxy cereal samples (wheat, normal maize, and normal rice) were located close to each other. Wheat starch gels were the most dispersed on the graph, which is consistent with the high dependence on the concentration of the gel shown in most of the studied parameters. The waxy starches had close positions not too distant from those of the tapioca and potato samples and with little influence from amylose concentration. The potato and tapioca samples were close to the vectors of the crossover point in rheology and peak viscosity in their pasting properties. The knowledge gained from this work allows a better understanding of the effects of starch concentration on food formulations.
RESUMEN
Microwave-assisted heat moisture treatment (MWT) was applied to quinoa grains, a nutritious gluten-free pseudocereal of great interest in food product development, to achieve the physical modification of the quinoa flour. The effect of treating quinoa grains at different initial water contents (WC; 10%, 20%, and 30%) in two operational systems was compared: one open at atmospheric pressure and variable WC (V system), and the other in hermetic containers at constant WC (C system). The morphological structure of the obtained flours and their techno-functional, rheological, and thermal properties were evaluated. MWT proved to be effective in modifying these properties, the main effects probably being caused by protein denaturation and aggregation, and intragranular molecular rearrangements of starch, with disruption of short-range molecular order and even the partial collapse of starch granules in the samples treated at the highest WC. The greatest differences were observed for the 20 and 30% WC treated-samples, particularly when using C system, which increased their water absorption capacity and decreased their foaming, emulsion, and gel-forming capacities. Based on these results, the control of WC and its evolution during MWT of quinoa grains appears to be a viable and effective approach to adapt flour functionality to the needs of food production, allowing a wider range of flour properties depending on the MWT conditions.
RESUMEN
In recent years, many efforts are being made to produce tef-based food for its nutritive and health-promoting advantages. Tef grain is always whole milled because of its tiny grain size and whole flours contain bran (pericarp, aleurone, and germ) where major non-starch lipids could be deposited along with the lipid-degrading enzymes: lipase and lipoxygenase. As lipoxygenase shows little activity in low moisture, the inactivation of lipase is the common objective for most heat treatments to extend the shelf life of flours. In this study, tef flour lipase inactivation kinetics via hydrothermal treatments assisted using microwaves (MW) were studied. The effects of tef flour moisture level (12%, 15%, 20%, and 25%) and MW treatment time (1, 2, 4, 6, and 8 min) on flour lipase activity (LA) and free fatty acid (FFA) content were evaluated. The effects of MW treatment on flour pasting characteristics and the rheological properties of gels prepared from the treated flours were also explored. The inactivation process followed a first-order kinetic response and the apparent rate constant of thermal inactivation increased exponentially with the moisture content of the flour (M) according to the equation 0.048·exp (0.073·M) (R2 = 0.97). The LA of the flours decreased up to 90% under the studied conditions. MW treatment also significantly reduced (up to 20%) the FFA level in the flours. The rheological study confirmed the presence of significant modifications induced by the treatment, as a lateral effect of the flour stabilization process.
Asunto(s)
Harina , Lipasa , Microondas , Geles , LipooxigenasasRESUMEN
Tef [Eragrostis tef (Zucc.) Trotter] flour is a gluten-free cereal rich in fiber, minerals, vitamins, and antioxidants, which offers a promising alternative for new food development. This study investigated the effect of microwave radiation (MW) on the techno-functional, thermal, rheological and microstructural properties of tef flours. White and brown tef grains were milled and microwaved at different moisture contents (MC) (15%, 20% and 25%) for a total irradiation time of 480 s. The morphological structure of tef flours was affected by MW treatment, and its particle size and hydration properties increased after the treatment. Lower peak, breakdown, and setback viscosities, up to 45%, 96%, and 67% below those of the control (untreated) samples, and higher pasting temperature, up to 8 °C in the 25% MC samples, were observed. From FTIR analysis a disruption of short-range molecular order was concluded, while DSC confirmed an increased stability of starch crystallites. Rheological analysis of the gels made from the treated samples revealed that MW had a structuring and stabilizing effect on all samples, leading to higher viscoelastic moduli, G' and Gâ³, and the maximum stress the gels withstood before breaking their structure, τmax. The MC of the flours during the MWT drove the modification of the techno-functional properties of the tef flours and the gel rheological and thermal characteristics. These results suggest that MW-treated tef flours are potential ingredients for improving the technological, nutritional and sensory quality of food products.
RESUMEN
The modification of flours by ultrasound (US) treatments requires excess water to suspend the sample to be treated, which must be removed after treatment to recover the ultrasonicated flour. The aim of this study was to determine the influence that the water removal method has on the final characteristics of US-treated gluten-free flours (rice, brown tef, corn and quinoa). US treatment parameters were constant, and two water removal methods were studied: freeze-drying and centrifugation + drying. The elimination of water by centrifugation resulted in the loss of solubilized compounds from the treated flours, which led to important differences between the final characteristics of US-treated flours. Ultrasonication resulted in the reduction of flours' particle size and modification of their color parameters. Techno-functional properties were modified by US treatment, where the water removal method was more influential in whole grain samples (brown tef and quinoa). Few differences were found in thermal properties among pairs of US-treated samples, indicative that the effect caused to starch was mainly attributed to ultrasonication conditions than to the drying method. The water removal method markedly influenced the pasting properties of US-treated flours, resulting in lower profiles when freeze-drying was applied and higher profiles when flours were retrieved by centrifugation. Gels made with tef, corn and quinoa presented reduced tan(δ)1 values after sonication, while gels made with rice did not show any modification. The water removal method is a decisive step in US treatments, defining the final characteristics of the treated matter, and having a great influence in the modification attributed to ultrasonication.
RESUMEN
Tef flour comes from a nutritionally-rich ancient grain gaining increasing interest in gluten-free market. Gluten-free sources are modified by different means to improve their functionality. Ultrasound treatment (US) alters flours' structure and leads to physically modified flours with a wider application range. The aim of the present work was to evaluate the impact of US treatments of moderate treatment time, 10 min, and high concentration of the aqueous flour dispersion, 25%, on the microstructural, starch damage, apparent amylose content, techno-functional, pasting and rheological properties of two tef flour varieties, white and brown. Temperature was varied (20, 40, 45, 50, and 55 °C) to modulate the impact of sonication. US treatments led to general particle fragmentation which markedly increased starch damage and lightness (L*) values. Apparent amylose content was higher after ultrasonication, as consequence of molecular fragmentation due to cavitation. Increased starch granules' exposed area led to enhanced interaction with water, promoting the water absorption index (WAI) and swelling power (SP) of treated flours. Pasting properties showed increased pasting temperatures as well as decreased viscometric profiles with lower breakdown viscosities, indicative of starch rearrangement improved by increasing temperature. Rheological properties indicated higher consistency in gels after US treatments, with improved ability to withstand stress and lower values of tan(δ)1 reflecting a higher solid-like behavior and higher strength of the gel. Temperature was found to be a crucial variable during US treatments, showing an improved degree of modification at higher temperatures in ultrasonicated tef flours, following the same trend in both varieties.
RESUMEN
The current trend in the food industry is towards "clean label" products with high sensory and nutritional quality. However, the inclusion of nutrient-rich ingredients in recipes often leads to sensory deficiencies in baked goods. To meet these requirements, physically modified flours are receiving more and more attention from bakery product developers. There are various findings in the literature on high hydrostatic pressure (HHP) technology, which can be used to modify various matrices so that they can be used as ingredients in the baking industry. HHP treatments can change the functionality of starches and proteins due to cold gelatinization and protein unfolding. As a result, the resulting ingredients are more suitable for nutrient-rich bakery formulations. This review describes the information available in the literature on HHP treatment conditions for ingredients used in the production of bakery products and analyses the changes in the techno-functional properties of these matrices, in particular their ability to act as structuring agents. The impact of HHP-treated ingredients on the quality of dough and bakery products and the effects on some nutritional properties of the treated matrices have been also analysed. The findings presented in this paper could be of particular interest to the bakery industry as they could be very useful in promoting the industrial application of HHP technology.
RESUMEN
Microwave radiation (MW) is an environment-friendly technology used to physically modify flours. Rice flour was MW-treated at different moisture content (MC) (3 %, 8 %, 13 %, 15 %, 20 % and 30 %). In vitro starch digestibility was determined and related to the changes caused by MW treatment to flours' structure and thermal properties, which were influenced by MC. A reduction of 49 % and 65 % in the gelatinization enthalpy of samples treated at 20 % and 30 % MC denoted a partial gelatinization. A loss of granular crystallinity in treated samples was confirmed by XR-diffraction and FTIR, particularly at 15 %, 20 % and 30 % MC. MW promoted the formation of random-coil, α-helix and ß-turn protein structure, and the disappearance of LF-ß-sheet. Morphological differences were found between samples treated at 8 % MC (loss of polygonal structure, protein layer covering granules' surface and small holes) and 30 % MC (rounded and aggregated granules, covered with exudate amylose). In vitro starch digestibility revealed that samples treated at 20 % and 30 % MC showed 40 % and 47 % higher rapidly digestible starch, 48 % and 70 % lower slowly digestible starch and 90 % lower resistant starch than the untreated flour. Flour MC in MW-treatment allowed the modulation of structural and thermal characteristics of rice flour and consequently its starch hydrolysis rate.
Asunto(s)
Oryza , Almidón , Almidón/química , Harina , Oryza/química , Microondas , Amilosa/químicaRESUMEN
Anchote (Coccinia abyssinica (Lam.) Cogn) is a potentially important source of starch and an underutilized root and tuber crop indigenous to Ethiopia. In this study, the physicochemical, morphological, thermal, and rheological properties of native starches isolated from four cultivars of anchote tubers were studied and compared to potato and cassava starches, which were considered as references. The amylose content of anchote starches varied from 15.8-22.3%. The anchote cultivars showed different granule sizes, but all revealed a B-type crystalline structure, identical to potato starch. The phosphorus content of anchote starches ranged from 82-93 mg/100 g and was much higher than that of potato and cassava (60.3 and 5.8 mg/100 g, respectively). This characteristic could govern several functional properties of anchote starches, making them suitable for applications in different types of noodles, glucose syrups, and viscous products. The gelatinization temperature and enthalpy of anchote starches, which ranged from 60.97 °C to 69.33 °C and 16.87 to 18.38 J/g, respectively, were considerably different compared to potato and cassava starches. Significant variations were also observed among the pasting properties of starches from anchote cultivars. They showed a higher stability to heating and shearing, having higher TV (2046 to 2280 mPa·s) and lower BV (248 to 487 mPa·s) values, and a higher final viscosity (3409 to 3686 mPa·s) than potato and cassava, which are important characteristics in food processing and when high gel viscosity is required after cooling. Anchote starch gels exhibited rheological characteristics of true gels, showing much lower (tan δ)1 values and significantly higher viscoelastic moduli than those found in cassava and potato gels. The present study revealed significant differences among the physicochemical properties of anchote starches, depending on the cultivar, and demonstrated their promising potential in food product development and other industrial applications.
RESUMEN
Tef is currently being incorporated into a wide range of foodstuff due to its high nutritional profile. This study tries to fill the information gap on the effect of tef varieties on physico-chemical, nutritional and sensorial quality of gluten-free bread. Maize starch replacement at 50, 75 and 100 g/100 g level by tef flour from three Ethiopian varieties (DZ-Cr-37, DZ-Cr-387 and DZ-01-99) resulted in viable gluten-free breads with acceptable sensory properties, higher mineral content and lower glycemic response. Tef cultivar type and blending level significantly affected bread quality. The 50% and 75% substitution levels and the DZ-Cr-37 variety led to the highest bread volumes with the lowest firmness. Breads made with DZ-01-99 variety were darker and with more reddish crust and crumb hues than those made with the other varieties. Breads from 100% DZ-Cr-37 achieved the highest hedonic scores for color, odor, taste and texture. The Ca, Fe and Mg contents of the breads made with 100% tef were 13, 40 and 30 times, respectively, higher than those of the control bread (100% maize starch), indicating tef could be used as an excellent source of these important minerals. In addition, the rapidly digestible starch content decreased up to 28% in breads fortified with tef flour.
RESUMEN
Fonio (Digitaria exilis Stapf) is an ancient African cereal that represents a rich source of carbohydrate, fat, fiber, vitamins, minerals, and sulfur-containing amino acids. Processing and utilization of fonio require adequate knowledge of its structural, chemical, and nutritional characteristics. The present work evaluates the structural, techno-functional, and gelling properties of fonio and compares them to other major gluten-free cereals (rice, maize, sorghum, and millet). Fonio flour presented significantly higher water absorption index and swelling power, while it scored a lower water solubility index than the reference flours. The pasting viscosity profile of fonio was similar to that of rice, with equivalent peak viscosity but a breakdown viscosity 24% lower than rice, indicative of higher stability and resistance to shearing and heating. Rheological properties demonstrated that fonio generates gels with remarkably strong structures. At 15% concentration, fonio gel withstood stress 579% higher than those observed in the reference flours without breaking its structure. Fonio flour presented the highest gelatinization enthalpy (11.45 J/g) and a narrow gelatinization temperature range (9.96 °C), indicative of a better-packed starch structure than the other analyzed flours. The texture of the gels made with fonio showed higher firmness over the evaluated period. These combined results suggest that fonio is a suitable ingredient for gel-like food formulations.
RESUMEN
The study evaluated the effect of autoclaving as a hydrothermal treatment on the quality and bioactivity of wheat bran (WB) with the objective of producing a natural ingredient with enhanced healthy properties. Nutritional, antioxidant, techno-functional and sensorial parameters were studied, and temperatures of 100, 115 and 130 °C were explored. Of these, 130 °C was found to be the best treatment, resulting in an ingredient with high storage stability, antioxidant properties, a four-fold increase in the concentration of free ferulic acid (compared with non-treated WB), and increased content of apigenin-6-C-arabinoside-8-C-hexoside, a flavonoid with reported antioxidant and antifungal properties. On the other hand, the autoclave treatment enhanced water absorption capacity and reduced WB pasting viscosity, mainly at higher temperature (130 °C), which would allow incorporation of the treated WB in liquid matrices such as juices, soups or milkshakes, among others. Although the glycemic index (GI) of the autoclaved samples increased, the use of intermediate particle size of 106 to 300 µm could contribute to the reduction of the glycemic load.
RESUMEN
This study evaluated the effect of inclusion of two types of tef flours (white and brown) at different levels (25, 50 and 100 %, total flour) on the nutritional (proximal and mineral composition), in vitro bioactive (antioxidant capacity and starch digestibility) and sensory properties of rice-tef crackers. The aim was to formulate a gluten-free product with nutritional and healthy benefits, and acceptable for consumers. Results showed than crackers enriched with white tef had a significant (p ≤ 0.05) higher concentration of all the minerals tested, except for calcium and manganese, compared to brown tef. Iron content of white tef was almost twice that of brown tef, and copper and magnesium increased from 0.12 mg/100 g and 39.2 mg/100 g in control crackers to 0.56 mg/100 g and 197 mg/100 g in white tef crackers (WT 100%), respectively. Moreover, white tef flour and crackers showed significantly higher antioxidant activity than rice or brown tef counterparts. Formulation with tef flour significantly contributed to a reduction of the rapidly available glucose and rapidly digestible starch of crackers.
RESUMEN
Injera is an Ethiopian flat bread that is mostly made from tef flour. Injera making on an industrial scale holds a significant economic and social interest but requires a thorough study of how the process variables affect the product quality. The aim of this work was to investigate the effects of mill type (hammer, disc, and blade) on injera sensory quality and starch digestibility. The application of software for the determination of injera quality descriptors and its comparison with visual human eye evaluation was also established. Injera made with disc mill flour had higher overall acceptability (6.6) than that obtained from hammer mill (4.2) and blade mill (4.1) flours. The injera made with blade mill flour obtained the lowest rapidly available glucose and rapidly digestible starch. The outcome of introducing software for the determinations of injera number of eyes was found effective; its difference with human eye determination was insignificant.