Impact of heat-treatment on wastewater analytical parameters.

Raw wastewater analysis is an important step in treatment assessment; however, it is associated with risks of personnel exposure to pathogens. Such risks are enhanced during virus outbreaks, such as the COVID pandemic, and heat-treatment is a commonly used mitigation measure. We examined whether heat-treatment compromises wastewater analytical parameters results. We found that heat-treatment of blackwater at 60 °C for 90 min in capped containers yielded no statistically different values (p > 0.05) for pH, chemical oxygen demand (COD), ammonia (NH3), total nitrogen (TN), total suspended solids (TSS), and turbidity for specimens from three different sources. This heat-treatment inactivated coliform bacteria (>4 log10 reduction) thus compromising the measurement of commonly used fecal contamination indicators. The observation of intact helminth eggs in heat-treated specimens suggests that the helminth egg enumeration assay is not compromised. These findings indicate that heat-treatment for the safe handling of wastewater, as may be needed in future virus outbreaks, does not affect the measurements of many common wastewater physico-chemical properties.

Sensor-based evaluation of a Urine Trap toilet in a shared bathroom.

Urine diversion in a No-Mix Toilet is a promising approach for sustainable fertilizers and reduction of the nutrient load for wastewater treatment; however, user adoption remains a challenge. This study evaluates the Urine Trap, a passive No-Mix toilet design based on the teapot effect, wherein the urine stream inlet is invisible to the user and therefore it does not impact the user experience for increased adoption. This study evaluated the nutrient separation performance of a Urine Trap flush toilet in a bathroom shared by women in two sites in India. Over three different testing periods, 841 uses of this squat plate were recorded in 50 days. Analytical measurements found 36 % separation efficiency for total nitrogen (TN). While effective, the Urine Trap under test by users did not yield a 70-80 % TN separation efficiency observed under engineering characterization. High temporal resolution data from sensors on waste collection tanks, the opening of the bathroom door, and cleansing water flow were used to gain insights into hygiene practices. The data showed a frequent habit of wetting the squat plate during physiological excretion, a hygienic practice that eases cleaning but degrades the teapot separation effect of the Urine Trap design. By using sensors, we demonstrate a method to non-invasively gain quantitative insights into hygiene practices to inform sanitation technologies deployment strategies for improved outcomes.

Potential Pitfalls in Wastewater Phosphorus Analysis and How to Avoid Them.

Due to the increasing adoption of nutrient discharge regulations, many research groups are stepping into new territory with phosphorus (P) measurements. Accurate reporting of P concentrations in effluent from novel wastewater treatment technologies is critical for protecting both environmental and human health. Analysis of P in wastewater is prone to pitfalls because of the (1) variety of chemical forms of P in wastewater (orthophosphate, condensed P, and organic P), (2) availability of different chemical assays for measuring different P forms, and (3) different conventions in the units for reporting P. Here, we present a case study highlighting how these pitfalls affect analysis and interpretation of P measurements. We show that, when used appropriately, commercially-available kits are indeed accurate tools for evaluating reactive P and total P concentrations. For both standard solutions and real wastewater, we systematically remove steps from the total P protocol to show how protocol deviations affect the results. While standard solutions are important for validating analytical methods, commercially-available wastewater standard solutions only contain P as orthophosphate (reactive P). We therefore demonstrate options for making a mixed-P standard solution containing acid-hydrolyzable and/or organic P compounds that can be used to validate both reactive P and total P assays.

Characterization of fecal sludge as biomass feedstock for thermal treatment in the southern Indian state of Tamil Nadu.

Background: Transformative sanitation technologies aim to treat fecal sludge (FS) by thermal processes and recover resources from it. There is a paucity of data describing the relevant properties of FS as viable feedstock for thermal treatment in major geographical target areas, such as India. Methods: This study characterized FS collected from septic tanks in two cities located in the Indian southern state of Tamil Nadu. FS samples were obtained at the point of discharge from trucks in Tiruppur (n=85 samples) and Coimbatore (n=50 samples). Additionally, biosolids obtained from sewage treatment plants (STP) in the cities of Coimbatore and Madurai were characterized. Total solids (TS) were measured, and proximate and ultimate analysis were conducted according to methods used by the fuel industry. Additionally, the ash content was analyzed for heavy metal using standard methods. Results: The average higher heating value (HHV) across all FS samples in Tiruppur (13.4 MJ/kg) was significantly higher than in Coimbatore (5.4 MJ/kg), which was partially attributed to the high ash content of 69% in the latter samples.  The HHV of the biosolids samples ranged from 10 to 12.2 MJ/Kg. The average total solids (TS) content for FS was 3.3% and 2.0% for Tiruppur and Coimbatore respectively, while the median TS content for the two cities was 2.3% and 1.2%. The heavy metal content of the ash was found to be below the thresholds for land disposal. Conclusions: This is one of the first studies that has systematically characterized the calorific and mineral content of septage and biosolids in several cities in India. We expect these data to serve as input data in the design of thermal processes for fecal sludge treatment.