Use of Knotless Barbed Sutures in Laparoscopic Inguinal Hernioplasty in Horses: 40 Cases.

Inguinal hernias (IHs) and ruptures are a relatively common condition in horses, occurring in foals (congenital) and adult (acquired) animals. A retrospective observational analysis was conducted on 40 cases that underwent laparoscopic surgery to close the VRs using barbed sutures alone or combined with other techniques. Signalment, clinical presentation, surgery, and follow-up data were obtained. In total, fifty-nine VRs were closed using barbed sutures (alone or in combination with other methods), with six cases performed prophylactically and forty-four due to acquired IH. Of the forty-four cases with IH, four were non-strangulated hernias, while thirty presented with strangulated small intestines (twenty-eight acquired and two congenital). The results obtained in this study suggest that laparoscopic hernioplasty with barbed sutures is an effective and safe surgical procedure that could be recommended as a standard practice for managing inguinal hernias in horses, particularly when sparing testicles or preserving reproductive capabilities is a priority.

Equine laryngoplasty: Effects of three anchoring techniques in the muscular process and three positions for suture implantation in the cricoid cartilage.

OBJECTIVE: To compare the effects of three anchoring techniques in the muscular process and three positions of laryngoplasty suture implantation in the cricoid cartilage on abduction of the arytenoid cartilage and interaction with the cricoarytenoid dorsalis (CAD) muscle compartments. STUDY DESIGN: Experimental study. SAMPLE POPULATION: Twenty-two cadaveric equine larynges. METHODS: Three implantation techniques were assessed in the left muscular process. They were the use of a titanium corkscrew (CS), a standard caudal passage using a Jamshidi needle (JCa), and a standard cranial passage using a Jamshidi needle (JCr). Each was assessed in combination with three caudal locations in the cricoid cartilage (right, left, and left lateral). Each suture combination was tightened to submaximal abduction (Dixon grade 2). Force on the suture, degree of larynx caudal rotation, and CAD muscle indentation were evaluated. RESULTS: The force required for optimal arytenoid cartilage abduction was lower (p < .01) for constructs involving a CS (7.45 ± 4 N). The CS also resulted in lower (p < .01) CAD muscle indentation (2.01 ± 1.25 mm) and less larynx rotation (9 ± 3.87°; adjusted p < .05). CONCLUSION: When inserted into the muscular process at the CAD tendon insertion point, the biomechanical properties of the CS reduced the force required for optimal arytenoid cartilage abduction. The CS also minimized interference with the CAD muscle compartments and reduced caudal displacement of the left arytenoid cartilage when it was under suture tension. CLINICAL SIGNIFICANCE: The CS implantation avoided larynx deformation and muscle interaction, offering the possibility to combine a nerve graft and laryngoplasty as a treatment for recurrent laryngeal neuropathy.

Holographic photopolymerization combined to microfluidics for the fabrication of lab-in-lab microdevices and complex 3D micro-objects.

We show here brand-new possibilities of lab-in-lab fabrication while combining holographic photopolymerization and microfluidics. One shot real-time 3D-printing can produce 3D architectured microchannels, or free-standing complex micro-objects eventually in flow. The methodology is very versatile and can be applied to e.g., acrylate resins or hydrogels.

Hybrid gold-silica nanoparticles for plasmonic applications: A comparison study of synthesis methods for increasing gold coverage.

The current work focuses on the synthesis of hybrid nanoparticles (NPs) made of a silica core (Si NPs) coated with discrete gold nanoparticles (Au NPs), which exhibit localized surface plasmon resonance (LSPR) properties. This plasmonic effect is directly related to the nanoparticles size and arrangement. In this paper, we explore a wide range of size for the silica cores (80, 150, 400, and 600 nm) and for the gold NPs (8, 10, and 30 nm). Some rational comparison between different functionalization techniques and different synthesis methods for the Au NPs are proposed, related to the optical properties and colloidal stability in time. An optimized, robust and reliable synthesis route is established, which improves the gold density and homogeneity. The performances of these hybrid nanoparticles are evaluated in order to be used in the shape of a dense layer for pollutant detection in gas or liquids, and find numerous applications as a cheap and new optical device.

Laryngeal reinnervation using the spinal accessory nerve: Electromyographic study of the sternomandibularis muscle.

BACKGROUND: Selective laryngeal reinnervation using the first and second cervical nerve (C1C2) is a treatment option for recurrent laryngeal neuropathy that aims to restore the function of the cricoarytenoideus dorsalis (CAD) muscle. Despite the technique's satisfying success rate, it has several limitations. These triggered the search for another potential donor nerve that could reduce CAD muscle fatigue and shorten rehabilitation. The ventral branch of the spinal accessory nerve, providing motor innervation to the sternomandibularis (SM) muscle, was identified as a potentially well-adapted nerve. OBJECTIVES: To gather normative data from SM muscle activity induced by physiological spinal accessory nerve stimulation at rest and during exercise, and to determine SM muscle activity and fibre type recruitment relative to posture, gait and respiratory cycle. STUDY DESIGN: Clinical observational study. METHODS: Surface electromyography (EMG) of the SM muscle was performed in nine horses: trained warmbloods, Thoroughbreds and Standardbreds. Signals were recorded in different feeding postures and at exercise, which included standardised treadmill exercise tests, lungeing and ridden work. RESULTS: Timing of the SM muscle contraction coincided with inspiration at gallop. Intra-individual mean SM muscle activity increased with exercising speed (four times higher in Thoroughbreds at gallop than walk and seven times higher in Standardbreds at high-speed trot than walk). Moreover, the SM muscle was strongly activated at rest when the horse was grazing (seven times more than when it was eating out of a hay net or stable feeder). Frequency domain analysis revealed a predominant type I muscle fibre recruitment during feeding and at exercise (type I muscle fibre activity was at least 2.5 times higher than type II muscle fibre activity). MAIN LIMITATIONS: Lack of reference data on equine EMG. CONCLUSIONS: This study confirmed the potentially advantageous properties of the spinal accessory nerve for laryngeal reinnervation.

Fabrication of modern lithium ion batteries by 3D inkjet printing: opportunities and challenges.

Inkjet printing (IJP) is a prospective additive manufacturing technology that enables the rapid and precise deposition of thin films or patterns. It offers numerous advantages over other thin-film manufacturing processes, including cost-effectiveness, ease of use, reduced waste material, and scalability. The key advantage of this technique is the ability of the fabrication of complex patterns with very high precision. The IJP gives the possibility of building three-dimensional (3D) structures on the microscale, which is beneficial for modern Li-Ion batteries (LIBs) and All-Solid-State Li-Ion Batteries (ASSLIBs). In contrast to typical laminated composite electrodes manufactured by tape casting and calendaring, 3D electrode design allows the electrolyte to penetrate through the electrode volume, increasing the surface-to-volume ratio and reducing ion diffusion paths. Thus, 3D electrodes/electrolyte structures are one of the most promising strategies for producing next-generation lithium-ion batteries with enhanced electrochemical performance. Although in the literature review, the IJP is frequently reported as a future perspective for the fabrication of 3D electrodes/electrolytes structures for LIBs, only a few works focus on this subject. In this review, we summarize the previous studies devoted to the topic and discuss different bottlenecks and challenges limiting further development.

The Effect of Reducing the Bone to Cast Distance in an Equine Transfixation Pin Cast: An Ex Vivo Biomechanical Study.

OBJECTIVE: The aim of this study was to evaluate the effect of reducing the bone to cast distance on the resistance of the pin to cyclic loading in equine transfixation pin casts. STUDY DESIGN: Eleven pairs of cadaveric equine third metacarpal bones were prepared and one 6.3/8.0 mm transfixation pin was placed in standard fashion 10 mm proximal to the distal physeal scar into each bone. One metacarpus of each pair was tested with a distance of 10 mm (10 mm group) and the contralateral metacarpus with a distance of 20 mm (20 mm group) between the outer cortex of the bone and the fixation of the pin. Eight pairs were tested using a simplified test set-up in which the pins were fastened at both ends to polyoxymethylene-copolymer sleeves. The pins of the remaining three pairs of bones were incorporated into a fibreglass cast. All specimens were tested under cyclic loading until failure of the pin in axial compression. RESULTS: All pins failed uni- or bilaterally at clinically relevant load levels. Pins of the 10 mm group endured significantly (p < 0.05) higher load levels and total number of cycles until failure compared with the pins of the 20 mm group. CONCLUSION: The distance between the bone surface and the cast at the location of pin insertion has a significant effect on resistance of the pins to cyclic loading. Therefore, the amount of padding applied underneath an equine transfixation pin cast can have an influence on the overall stability and durability of the construct.

Balloon catheter occlusion of the maxillary, internal, and external carotid arteries in standing horses.

OBJECTIVE: To assess the feasibility of balloon catheter occlusion of the internal carotid artery (ICA), external carotid artery (ECA), and maxillary artery (MA) in standing horses. STUDY DESIGN: Experimental and clinical cases series. ANIMALS: Eight healthy horses (phase 1) and 11 clinical cases (phase 2). METHODS: Occlusions were performed on standing horses under sedation and local anesthesia. In phase 1, four horses underwent bilateral ICA balloon catheter occlusion, and four horses underwent balloon catheter occlusion of the ECA and MA. In phase 2, horses were treated by occlusion of ICA (n = 7), ECA (n = 2), or ECA and ICA (n = 2). RESULTS: Internal carotid artery occlusion was successful in seven of eight and seven of nine arteries in phases 1 and 2, respectively. The procedures lasted 53 and 50 minutes, respectively, and catheters were inserted over 13 ± 0.7 cm (mean ± SD). External carotid artery occlusion was successful in seven of seven and four of four arteries in phases 1 and 2, respectively, with mean durations of 31 and 26 minutes, respectively, and a mean distance of catheter insertion of 11.9 cm. Maxillary artery occlusion was successful in five of seven arteries (phase 1), with a mean surgical duration of 47 minutes and a mean distance of catheter insertion of 42.8 cm. CONCLUSION: Balloon catheter occlusion of the ICA, ECA, and MA was achieved in most standing horses. CLINICAL SIGNIFICANCE: Balloon catheter occlusion in standing horses provides an alternative to prevent or treat hemorrhage related to guttural pouch mycosis, particularly in horses in which general anesthesia might pose a risk.

Thyrohyoideus muscle innervation in the horse.

OBJECTIVE: To describe the innervation of the thyrohyoideus (TH) muscle and to confirm our findings with stimulation of first cervical (C1) nerve branches. STUDY DESIGN: Ex vivo phase 1 and clinical phase 2. ANIMALS: Fourteen head and neck specimens and 17 client-owned horses. METHODS: In phase 1, the cranial nerve (CN) XII and the C1 nerve were dissected with their branches in 20 dissections were performed on 14 specimens (6 left and right side and 8 only left or right) Anatomy was noted. Samples of nerve bifurcations were collected for histological confirmation of anatomical findings. First cervical nerve branches were stimulated in horses undergoing cervical nerve graft to treat laryngeal hemiplegia. RESULTS: The nerve innervating the TH muscle arose directly from the C1 nerve in 17 of 20 dissections, from an anastomotic branch between CN XII and the C1 nerve in two of 20 dissections, and from the C1 nerve and the anastomotic branch in one of 20 dissections. No direct connection between the TH muscle and CN XII was found. Histological examination revealed that the anastomosis was composed of C1 nerve fibers passing over to CN XII. First cervical stimulation resulted in TH muscle contraction in 16 of 17 horses. CONCLUSIONS: The innervation of the TH muscle originated from the C1 nerve according to dissection, histological, and conduction studies, with variation in the branching pattern. CLINICAL SIGNIFICANCE: Care should be taken to preserve the C1 nerve during prosthetic laryngoplasty. The surgical technique for C1 nerve grafts should be reconsidered in light of these findings, along with new options to treat dorsal displacement of the soft palate..

Self-Organization of Large Alumina Platelets and Silica Nanoparticles by Heteroaggregation and Sedimentation: Toward an Alternative Shaping of Nacre-Like Ceramic Composites.

Nacre-like ceramic composites are of importance in a wide range of applications, because of their mechanical properties, combining high mechanical strength and high fracture toughness. Those mechanical properties are the result of strongly aligned platelets glued in a matrix. Different methods exist to shape such a "brick-and-mortar" hierarchical structure. In this paper, we propose to use the phenomenon of heteroaggregation between silica nanoparticles and large alumina platelets. Experimental and numerical results show that silica nanoparticles can adsorb on alumina platelets with good distribution. This adsorption promotes the deagglomeration of alumina that can self-organize in layers by sedimentation. This phenomenon can be exploited to shape alumina-silica nacre-like composites.

Ex vivo study of minimally invasive procedures for cartilage removal from the metacarpophalangeal or metatarsophalangeal joint and for fetlock tension band application.

OBJECTIVE: To describe reliable minimally invasive procedures for (1) removing cartilage by joint distraction and articular drilling for equine metacarpophalangeal (MCP)/metatarsophalangeal (MTP) arthrodesis; (2) applying a palmar/plantar tension band without MCP/MTP joint luxation. STUDY DESIGN: Experimental study. SAMPLE POPULATION: Cadaveric equine limbs (n = 12). METHODS: All limbs were used to evaluate the drilling technique. First the MCP/MTP joint was distracted with a 5.5-mm cortical screw. Then, through four stab incisions, articular cartilage was removed with a 4.5-mm drill. Six randomly chosen limbs were then tested for minimally invasive tension band application with a specially designed cannula. Accurate positioning of the tension band was assessed radiographically. All MCP/MTP joints were disarticulated, and the areas of removed cartilage were visually assessed and measured by using planimetry. RESULTS: The mean percentage of removed cartilage was 66.8% ± 7.6% for the metacarpus/metatarsus surface, 67.9% ± 8.6% for the proximal phalanx surface, and 59.5% ± 1% for the two sesamoid bones. The tension band could be accurately placed through four stab incisions with the cannula. CONCLUSION: This minimally invasive technique for cartilage removal was efficient and should be favorable for joint fusion in some clinical situations. The minimally invasive tension band application through stab incisions was feasible and repeatable. CLINICAL SIGNIFICANCE: These procedures should allow total minimally invasive MCP/MTP arthrodesis and be used in selected clinical cases.

Transendoscopic correction of epiglottic entrapment with a silicone-covered laser guide and diode laser in 29 horses.

OBJECTIVE: To describe the use of a silicone-covered laser guide and diode laser for surgical correction of epiglottic entrapment and report postoperative outcomes in horses with epiglottic entrapment. STUDY DESIGN: Retrospective case series. ANIMALS: Thoroughbred and standardbred racehorses (n = 29) with epiglottic entrapment. METHODS: A silicone-covered laser guide was placed endoscopically to direct the diode laser cutting action during transection of the entrapping subepiglottic membrane and to act as a physical barrier between the membrane and the epiglottic cartilage. Postoperative complications and trainer satisfaction were recorded via use of a follow-up questionnaire. Race records were reviewed to determine return to racing and detect differences in the number of starts, wins, or earnings before and after surgery. RESULTS: The entrapping membrane was successfully released in all horses. Mild postoperative complications such as swelling of the surgical site (12 horses) and coughing or mild nasal discharge (5 horses) were recorded during the first few days after surgery. Ninety-six percent of trainers were satisfied with the outcome of the procedure; 93% of horses returned to racing. CONCLUSION: Laser guide-assisted transection of the subepiglottic membrane corrected epiglottic entrapment in standing horses. CLINICAL SIGNIFICANCE: Ease of surgical technique, mild postoperative complications, and a good prognosis to return to racing make this a suitable alternative to the traditional laser procedure.

Standing MRI for surgical planning of equine fracture repair.

OBJECTIVE: To report the feasibility of standing MRI (sMRI) and document the value of sMRI in surgical planning for surgical repair of limb fractures in the horse. STUDY DESIGN: Retrospective case series. ANIMALS: Thirty-one horses with preoperative sMRI. METHODS: Medical records were reviewed for fracture type, application of a polyester cast, sMRI sequences performed, technical variables, and image quality. Fracture geometry and concomitant lesions were compared between sMRI and radiography. The relative value of sMRI with regard to surgical planning was classified as minor (sMRI did not provide additional findings), intermediate (additional lesions found or slight modification to surgical plan), or major (sMRI led to significant alternations in surgical plan). RESULTS: Standing MRI provided good studies in all horses. Standing MRI was classified as having major relevance in 12 of 31 horses, intermediate relevance in 14 of 31 horses, and minor relevance in 5 of 31 horses. CONCLUSION: Preoperative sMRI produced good studies in all horses and influenced the surgical planning in the majority of fractures in this study. Application of a polyester cast seemed to improve comfort without appreciable loss of image quality. CLINICAL SIGNIFICANCE: Standing MRI can be considered as an adjunct to plan the repair of equine fractures, and a polyester cast does not impair image quality.

Anatomy of the vestibulum esophagi and surgical implications during prosthetic laryngoplasty in horses.

OBJECTIVE: To describe the anatomy of the entry to the equine esophagus (vestibulum esophagi) and to assess the risk of penetrating its adventitia and/or lumen during laryngoplasty. STUDY DESIGN: Ex vivo cadaveric study. SAMPLE POPULATION: Five isolated equine larynges and 39 equine head and neck specimens. METHODS: The anatomy of the vestibulum esophagi was studied by dissection of 5 cadaver specimens. Then, a bilateral laryngoplasty was performed, including 5 suture placements through the muscular processes, caudal, rostral, and sagittal, with straight and curved needles. Two of the 3 surgeons performing the implantations were unaware of the goals of the study. Suture positions and iatrogenic trauma to the lumen and/or adventitia of the vestibulum esophagi were identified during dissection of the specimens. Risk factors for penetrating the adventitia were evaluated with a multivariate regression model. RESULTS: The vestibulum esophagi spans between both wings of the thyroid cartilage over the entire width of the larynx, covering the rostral spine (arcuate crest) of the arytenoid cartilages. It is covered by the thyropharyngeus and cricopharyngeus muscles. Masked surgeons were associated with a significantly higher number of adventitia penetrations (72%) compared to the nonmasked surgeon (9%). The lumen of the vestibulum esophagi was penetrated in 4.6% of suture placements and only by the 2 masked surgeons. CONCLUSION: Penetration of the adventitia was more common when surgeons were unaware of the anatomical extent of the vestibulum esophagi. CLINICAL SIGNIFICANCE: Anatomical knowledge of the extent of the vestibulum esophagi reduces the risk of penetrating its lumen or adventitia during suture placement on the muscular process of the arytenoid cartilage.

Crosslinking chemistry of poly(vinylmethyl-co-methyl)silazanes toward low-temperature formable preceramic polymers as precursors of functional aluminium-modified Si-C-N ceramics.

Crosslinking chemistry of a liquid poly(vinylmethyl-co-methyl)silazane with an alane hydride-based complex according to Si : Al ratios varying from 5 to 2.5 has been investigated in detail through the characterization of the as-obtained polymers using solid-state NMR, FT-IR and elemental analyses. This reaction allows tailoring the chemical and physical properties of the neat liquid polysilazane while extending its processability to lead to a series of low-temperature formable aluminium-modified polysilazanes. Structural models have been established based on solid-state NMR spectroscopy. Then, pyrolysis under nitrogen occurring the conversion of polymers into ceramics has been studied by coupling TG experiments with FTIR of pyrolysis intermediates. Pyrolysis at 1000 °C leads to X-ray amorphous Al-modified silicon carbonitride materials with higher ceramic yields compared to the materials obtained from the neat polysilazane. However, the increase of the ceramic yield is minimized with the decrease of the Si : Al ratio from 5 to 2.5 in the as-obtained polymers. This is due to the introduction of -NR3 (R = CH3 and C2H5) units as side groups during the polymer synthesis which are released in the low temperature regime of the pyrolysis. The structural evolution of the amorphous network of ceramics has been studied by annealing up to 1800 °C though X-ray diffraction and Raman spectroscopy. Such studies point out that samples remain amorphous even after annealing at 1400 °C (low Si : Al ratio) and 1600 °C (high Si : Al ratio) before forming Si3N4/SiC/AlN and AlN/SiC/C composites after annealing at 1800 °C depending on the Si : Al ratio fixed in the early stage of the process. Dense pieces could be prepared from these low-temperature formable polymers. The latter, especially those containing a certain portion of -NR3 (R = CH3 and C2H5) units acting as plasticizing groups during the process, display appropriate requirements for pressing at low temperature forming dense pieces with hardness and Young's modulus as high as 21.7 GPa and 192.7 GPa, respectively.

Pancarpal and partial carpal arthrodesis with 3 locking compression plates in 6 horses.

OBJECTIVE: To report the outcome of horses after pancarpal or partial carpal arthrodesis with 3 locking compression plates (LCP). STUDY DESIGN: Case series. ANIMALS: Six horses ranging in age from 8 months to 16 years and weighing 227-580 kg with severe carpal pathology including acute fractures, chronic osteoarthritis, and chronic angular limb deformity. METHODS: Pancarpal or partial carpal arthrodesis was performed with 3 LCP. Autologous cancellous bone grafts were used in 5 of 6 cases to facilitate joint arthrodesis. RESULTS: External coaptation was maintained for 4 to 6 weeks after surgery. Radiographic follow-up was available in all 6 cases, all of which reached arthrodesis and pasture soundness by 4-5 months postoperatively. One case required implant removal at 6 months because of implant exposure through the skin but returned to pasture soundness after removal. CONCLUSION: Carpal instability due to acute fractures or chronic disease was successfully stabilized with 3 short LCP, leading to pasture soundness in all 6 horses. CLINICAL SIGNIFICANCE: The use of 3 short LCP should be considered as a strategy to facilitate pancarpal or partial carpal arthrodesis by providing superior stability without placement of implants in the diaphysis of the radius and third metacarpus.

Ex vivo biomechanical stability of 5 cricoid-suture constructs for equine laryngoplasty.

OBJECTIVE: To determine the biomechanical properties of 5 suture constructs in the equine cricoid under cyclic loading and load to failure testing. STUDY DESIGN: Ex vivo study. SAMPLES: Seventy-five equine cadaver larynges. METHODS: Each larynx was implanted with 1 of 5 cricoid-suture constructs. The standard laryngoplasty, where a suture is passed once through the cricoid, including its caudal edge, was used in 2 constructs: 1 with 5 USP Ethibond (ES) and 1 with 2 mm Fibertape (FS). In the third construct, the 2 mm Fibertape was passed twice through the cricoid including its caudal edge (Double Loop-DL). Constructs 4 and 5 used 2 mm Fibertape in a U-shaped loop passed through the cricoid but excluding its caudal edge. One construct was supported with a metallic button (MB) on the caudo-ventral aspect of the cricoid while the other included only the U-shaped loop (U). Constructs were subjected to cyclic loading and to single cycle to failure. Reduction of the left-to-right arytenoid angle quotient (LRQ), suture migration, and load at failure were compared. RESULTS: LRQ reduction after cyclic loading was lower in MB and U than ES constructs. During cyclic loading, suture migration was reduced in MB, U, and DL compared to ES constructs. Mean load at failure was lower in FS and U than in ES constructs. CONCLUSION: Loss of abduction after equine laryngoplasty may be reduced and pullout forces increased by applying a MB construct in the cricoid cartilage. In vivo testing is required to verify these results.

Quantification of hypoxia-related gene expression as a potential approach for clinical outcome prediction in breast cancer.

Breast cancers are solid tumors frequently characterized by regions with low oxygen concentrations. Cellular adaptations to hypoxia are mainly determined by "hypoxia inducible factors" that mediate transcriptional modifications involved in drug resistance and tumor progression leading to metastasis and relapse occurrence. In this study, we investigated the prognostic value of hypoxia-related gene expression in breast cancer. A systematic review was conducted to select a set of 45 genes involved in hypoxia signaling pathways and breast tumor progression. Gene expression was quantified by RT-qPCR in a retrospective series of 32 patients with invasive ductal carcinoma. Data were analyzed in relation to classical clinicopathological criteria and relapse occurrence. Coordinated overexpression of selected genes was observed in high-grade and HER2+ tumors. Hierarchical cluster analysis of gene expression significantly segregated relapsed patients (p = 0.008, Chi2 test). All genes (except one) were up-regulated and six markers were significantly expressed in tumors from recurrent patients. The expression of this 6-gene set was used to develop a basic algorithm for identifying recurrent patients according to a risk score of relapse. Analysis of Kaplan-Meier relapse-free survival curves allowed the definition of a threshold score of 2 (p = 0.021, Mantel-Haenszel test). The risk of recurrence was increased by 40% in patients with a high score. In addition to classical prognostic factors, we showed that hypoxic markers have potential prognostic value for outcome and late recurrence prediction, leading to improved treatment decision-making for patients with early-stage invasive breast cancer. It will be necessary to validate the clinical relevance of this prognostic approach through independent studies including larger prospective patient cohorts.

Molecular Chemistry and Engineering of Boron-Modified Polyorganosilazanes as New Processable and Functional SiBCN Precursors.

A series of boron-modified polyorganosilazanes was synthesized from a poly(vinylmethyl-co-methyl)silazane and controlled amounts of borane dimethyl sulfide. The role of the chemistry behind their synthesis has been studied in detail by using solid-state NMR spectroscopy, FTIR spectroscopy, and elemental analysis. The intimate relationship between the chemistry and the processability of these polymers is discussed. Polymers with low boron contents displayed appropriate requirements for facile processing in solution, such as impregnation of host carbon materials, which resulted in the design of mesoporous monoliths with a high specific surface area after pyrolysis. Polymers with high boron content are more appropriate for solid-state processing to design mechanically robust monolith-type macroporous and dense structures after pyrolysis. Boron acts as a crosslinking element, which offers the possibility to extend the processability of polyorganosilazanes and suppress the distillation of oligomeric fragments in the low-temperature region of their thermal decomposition (i.e., pyrolysis) at 1000 °C under nitrogen. Polymers with controlled and high ceramic yields were generated. We provide a comprehensive mechanistic study of the two-step thermal decomposition based on a combination of thermogravimetric experiments coupled with elemental analysis, solid-state NMR spectroscopy, and FTIR spectroscopy. Selected characterization tools allowed the investigation of specific properties of the monolith-type SiBCN materials.

Engulfment of ceramic particles by fibroblasts does not alter cell behavior.

Despite many studies, the impact of ceramic particles on cell behavior remains unclear. The aim of the present study was to investigate the effects of nano-sized ceramic particles on fibroblastic cells. Fibroblasts (dermal fibroblasts freshly isolated from skin samples and WI26 fibroblastic cells) were cultured in a monolayer in the presence of alumina or cerium-zirconia particles (≈50 nm diameter) at two concentrations (100 or 500 µg ml-1). Fluorescent alumina particles were also used. The following properties were analyzed: cell morphology, cytoplasmic ceramic incorporation (using confocal and transmission electron microscopy) and migration (using a silicon insert). Sedimentation field-flow fractionation (SdFFF) was also used to evaluate the rate of incorporation of ceramic particles into the cells. Finally, after treatment with various concentrations of ceramic particles, fibroblasts were also included in a collagen type I lattice constituting a dermal equivalent (DE), and the collagen lattice retraction and cell proliferation were evaluated. In monolayer conditions, the presence of both alumina and cerium-zirconia ceramic particles did not cause any deleterious effects on cultured cells (dermal fibroblast and WI26 cells) and cell fate was not affected in any way by the presence of ceramic particles in the cytoplasm. Confocal (using fluorescent alumina particles) and electron microscopy (using both alumina and cerium-zirconia particles) showed that ceramic particles were internalized in the WI26 cells. Using fluorescent membrane labeling and fluorescent alumina particles, a membrane was observed around the particle-containing vesicles present in the cytoplasm. Electron microscopy on WI26 cells showed the presence of a classical bilayer membrane around the ceramic particles. Interestingly, SdFFF confirmed that some dermal fibroblasts contained many alumina ceramic particles while others contained very few; in WI26 cells, the uptake of alumina ceramic was more homogeneous. In DE, collagen lattice retraction and cell proliferation were unchanged when WI26 fibroblastic cells contained alumina or cerium-zirconia ceramic particles. Our data suggest that ceramic particles are internalized in the cells by endocytosis. The presence of ceramic particles in the cytoplasm has no affect on cell behavior, confirming the excellent biocompatibility of this material and anticipating a minimal harmful effect of potential wear debris.