High-Power Impulse Magnetron Sputter Deposition of Ag on Self-Assembled Au Nanoparticle Arrays at Low-Temperature Dewetting Conditions.

Plasmons have facilitated diverse analytical applications due to the boosting signal detectability by hot spots. In practical applications, it is crucial to fabricate straightforward, large-scale, and reproducible plasmonic substrates. Dewetting treatment, via applying direct thermal annealing of metal films, has been used as a straightforward method in the fabrication of such plasmonic nanostructures. However, tailoring the evolution of the dewetting process of metal films poses considerable experimental complexities, mainly due to nanoscale structure formation. Here, we use grazing-incidence small- and wide-angle X-ray scattering for the in situ investigation of the high-power impulse magnetron sputter deposition of Ag on self-assembled Au nanoparticle arrays at low-temperature dewetting conditions. This approach allows us to examine both the direct formation of binary Au/Ag nanostructure and the consequential impact of the dewetting process on the spatial arrangement of the bimetallic nanoparticles. It is observed that the dewetting at 100 °C is sufficient to favor the establishment of a homogenized structural configuration of bimetallic nanostructures, which is beneficial for localized surface plasmon resonances (LSPRs). The fabricated metal nanostructures show potential application for the surface-enhanced Raman scattering (SERS) detection of rhodamine 6G molecules. As SERS platform, bimetallic nanostructures formed with dewetting conditions turn out to be superior to those without dewetting conditions. The method in this work is envisioned as a facile strategy for the fabrication of plasmonic nanostructures.

Light-Induced Transformation of Virus-Like Particles on TiO2.

Titanium dioxide (TiO2) shows significant potential as a self-cleaning material to inactivate severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and prevent virus transmission. This study provides insights into the impact of UV-A light on the photocatalytic inactivation of adsorbed SARS-CoV-2 virus-like particles (VLPs) on a TiO2 surface at the molecular and atomic levels. X-ray photoelectron spectroscopy, combined with density functional theory calculations, reveals that spike proteins can adsorb on TiO2 predominantly via their amine and amide functional groups in their amino acids blocks. We employ atomic force microscopy and grazing-incidence small-angle X-ray scattering (GISAXS) to investigate the molecular-scale morphological changes during the inactivation of VLPs on TiO2 under light irradiation. Notably, in situ measurements reveal photoinduced morphological changes of VLPs, resulting in increased particle diameters. These results suggest that the denaturation of structural proteins induced by UV irradiation and oxidation of the virus structure through photocatalytic reactions can take place on the TiO2 surface. The in situ GISAXS measurements under an N2 atmosphere reveal that the virus morphology remains intact under UV light. This provides evidence that the presence of both oxygen and UV light is necessary to initiate photocatalytic reactions on the surface and subsequently inactivate the adsorbed viruses. The chemical insights into the virus inactivation process obtained in this study contribute significantly to the development of solid materials for the inactivation of enveloped viruses.

Insulator Polymer Matrix Construction on All-Small-Molecule Photoactive Blend Towards Extrapolated 15000 Hour T80 Stable Devices.

To boost the stability of all-small-molecule (ASM) organic photovoltaic (OPV) blends, an insulator polymer called styrene-ethylene-butylene-styrene (SEBS) as morphology stabilizer is applied into the host system of small molecules BM-ClEH:BO-4Cl. Minor addition of SEBS (1 mg/ml in host solution) provides a significantly enhanced T80 value of 15000 hours (extrapolated), surpassing doping-free (0 mg/ml) and heavy doping (10 mg/ml) counterparts (900 hours, 30 hours). The material reproducibility and cost-effectiveness of the active layer will not be affected by this industrially available polymer, where the power conversion efficiency (PCE) can be well maintained at 15.02%, which is still a decent value for non-halogen solvent-treated ASM OPV. Morphological and photophysical characterizations clearly demonstrate SEBS's pivotal effect on suppressing the degradation of donor molecules and blend film's crystallization/aggregation reorganization, which protects the exciton dynamics effectively. This work pays meaningful attention to the ASM system stability, performs a smart strategy to suppress the film morphology degradation, and releases a comprehensive understanding of the mechanism of device performance reduction.

Donor-Acceptor Copolymer with a Linear Backbone Induced Ordered and Robust Doping Morphology for Efficient and Stable Organic Electrochemical Devices.

Donor (D)-acceptor (A) copolymer-based organic mixed ionic-electronic conductors (OMIECs) exhibit intrinsic environmental stability for they have tailored energy levels. However, their figure-of-merit (µC*) is still falling behind the D-D polymers because of morphology deterioration during the electrochemical doping process. Herein, we developed two D-A copolymers with precisely regulated backbone curvature, namely PTBT-P and PTTBT-P. Compared to the curved PTBT-P and previously reported copolymers, PTTBT-P better keeps its backbone linear, leading to a long-range ordered doping morphology, which is revealed by the in operando X-ray technique. This optimized doping morphology enables a significantly improved operando charge mobility (µ) of 2.44 cm2 V-1 s-1 and a µC* value of 342 F cm-1 V-1 s-1, one of the highest values in D-A copolymer based on OECTs. Besides, we fabricated PTTBT-P-based electrochemical random-access memories and achieved ideal and robust conductance modulation. This study highlights the critical role of backbone curvature control in the optimization of doping morphology for efficient and robust organic electrochemical devices.

Operando Study Insights into Lithiation/Delithiation Processes in a Poly(ethylene oxide) Electrolyte of All-Solid-State Lithium Batteries by Grazing-Incidence X-ray Scattering.

Poly(ethylene oxide) (PEO)-based composite electrolytes (PCEs) are considered as promising candidates for next-generation lithium-metal batteries (LMBs) due to their high safety, easy fabrication, and good electrochemical stability. Here, we utilize operando grazing-incidence small-angle and wide-angle X-ray scattering to probe the correlation of electrochemically induced changes and the buried morphology and crystalline structure of the PCE. Results show that the two irreversible reactions, PEO-Li+ reduction and TFSI- decomposition, cause changes in the crystalline structure, array orientation, and morphology of the PCE. In addition, the reversible Li plating/stripping process alters the inner morphology, especially the PEO-LiTFSI domain radius and distance between PEO-LiTFSI domains, rather than causing crystalline structure and orientation changes. This work provides a new path to monitor a working battery in real time and to a detailed understanding of the Li+ diffusion mechanism, which is essential for developing highly transferable and interface-stable PCE-based LMBs.

Modular slot-die coater for in situ grazing-incidence x-ray scattering experiments on thin films.

Multimodal in situ experiments during slot-die coating of thin films pioneer the way to kinetic studies on thin-film formation. They establish a powerful tool to understand and optimize the formation and properties of thin-film devices, e.g., solar cells, sensors, or LED films. Thin-film research benefits from time-resolved grazing-incidence wide- and small-angle x-ray scattering (GIWAXS/GISAXS) with a sub-second resolution to reveal the evolution of crystal structure, texture, and morphology during the deposition process. Simultaneously investigating optical properties by in situ photoluminescence measurements complements in-depth kinetic studies focusing on a comprehensive understanding of the triangular interdependency of processing, structure, and function for a roll-to-roll compatible, scalable thin-film deposition process. Here, we introduce a modular slot-die coater specially designed for in situ GIWAXS/GISAXS measurements and applicable to various ink systems. With a design for quick assembly, the slot-die coater permits the reproducible and comparable fabrication of thin films in the lab and at the synchrotron using the very same hardware components, as demonstrated in this work by experiments performed at Deutsches Elektronen-Synchrotron (DESY). Simultaneous to GIWAXS/GISAXS, photoluminescence measurements probe optoelectronic properties in situ during thin-film formation. An environmental chamber allows to control the atmosphere inside the coater. Modular construction and lightweight design make the coater mobile, easy to transport, quickly extendable, and adaptable to new beamline environments.

INSIGHT: in situ heuristic tool for the efficient reduction of grazing-incidence X-ray scattering data.

INSIGHT is a Python-based software tool for processing and reducing 2D grazing-incidence wide- and small-angle X-ray scattering (GIWAXS/GISAXS) data. It offers the geometric transformation of the 2D GIWAXS/GISAXS detector image to reciprocal space, including vectorized and parallelized pixel-wise intensity correction calculations. An explicit focus on efficient data management and batch processing enables full control of large time-resolved synchrotron and laboratory data sets for a detailed analysis of kinetic GIWAXS/GISAXS studies of thin films. It processes data acquired with arbitrarily rotated detectors and performs vertical, horizontal, azimuthal and radial cuts in reciprocal space. It further allows crystallographic indexing and GIWAXS pattern simulation, and provides various plotting and export functionalities. Customized scripting offers a one-step solution to reduce, process, analyze and export findings of large in situ and operando data sets.

A Practical Approach Toward Highly Reproducible and High-Quality Perovskite Films Based on an Aging Treatment.

Solution processing of hybrid perovskite semiconductors is a highly promising approach for the fabrication of cost-effective electronic and optoelectronic devices. However, challenges with this approach lie in overcoming the controllability of the perovskite film morphology and the reproducibility of device efficiencies. Here, a facile and practical aging treatment (AT) strategy is reported to modulate the perovskite crystal growth to produce sufficiently high-quality perovskite thin films with improved homogeneity and full-coverage morphology. The resulting AT-films exhibit fewer defects, faster charge carrier transfer/extraction, and suppressed non-radiative recombination compared with reference. The AT-devices achieve a noticeable improvement in the reproducibility, operational stability, and photovoltaic performance of devices, with the average efficiency increased by 16%. It also demonstrates the feasibility and scalability of AT strategy in optimizing the film morphology and device performance for other perovskite components including MAPbI3 , (MAPbBr3 )15 (FAPbI3 )85 , and Cs0.05 (MAPbBr3 )0.17 (FAPbI3 )0.83 . This method opens an effective avenue to improve the quality of perovskite films and photovoltaic devices in a scalable and reproducible manner.

Trace Water in Lead Iodide Affecting Perovskite Crystal Nucleation Limits the Performance of Perovskite Solar Cells.

The experimental replicability of highly efficient perovskite solar cells (PSCs) is a persistent challenge faced by laboratories worldwide. Although trace impurities in raw materials can impact the experimental reproducibility of high-performance PSCs, the in situ study of how trace impurities affect perovskite film growth is never investigated. Here, light is shed on the impact of inevitable water contamination in lead iodide (PbI2 ) on the replicability of device performance, mainly depending on the synthesis methods of PbI2 . Through synchrotron-based structure characterization, it is uncovered that even slight additions of water to PbI2 accelerate the crystallization process in the perovskite layer during annealing. However, this accelerated crystallization also results in an imbalance of charge-carrier mobilities, leading to a degradation in device performance and reduced longevity of the solar cells. It is also found that anhydrous PbI2 promotes a homogenous nucleation process and improves perovskite film growth. Finally, the PSCs achieve a remarkable certified power conversion efficiency of 24.3%. This breakthrough demonstrates the significance of understanding and precisely managing the water content in PbI2 to ensure the experimental replicability of high-efficiency PSCs.

Decoding the Self-Assembly Plasmonic Interface Structure in a PbS Colloidal Quantum Dot Solid for a Photodetector.

Hybrid plasmonic nanostructures have gained enormous attention in a variety of optoelectronic devices due to their surface plasmon resonance properties. Self-assembled hybrid metal/quantum dot (QD) architectures offer a means of coupling the properties of plasmonics and QDs to photodetectors, thereby modifying their functionality. The arrangement and localization of hybrid nanostructures have an impact on exciton trapping and light harvesting. Here, we present a hybrid structure consisting of self-assembled gold nanospheres (Au NSs) embedded in a solid matrix of PbS QDs for mapping the interface structures and the motion of charge carriers. Grazing-incidence small-angle X-ray scattering is utilized to analyze the localization and spacing of the Au NSs within the hybrid structure. Furthermore, by correlating the morphology of the Au NSs in the hybrid structure with the corresponding differences observed in the performance of photodetectors, we are able to determine the impact of interface charge carrier dynamics in the coupling structure. From the perspective of architecture, our study provides insights into the performance improvement of optoelectronic devices.

Diblock copolymer pattern protection by silver cluster reinforcement.

Pattern fabrication by self-assembly of diblock copolymers is of significant interest due to the simplicity in fabricating complex structures. In particular, polystyrene-block-poly-4-vinylpyridine (PS-b-P4VP) is a fascinating base material as it forms an ordered micellar structure on silicon surfaces. In this work, silver (Ag) is applied using direct current magnetron sputter deposition and high-power impulse magnetron sputter deposition on an ordered micellar PS-b-P4VP layer. The fabricated hybrid materials are structurally analyzed by field emission scanning electron microscopy, atomic force microscopy, and grazing incidence small angle X-ray scattering. When applying simple aqueous posttreatment, the pattern is stable and reinforced by Ag clusters, making micellar PS-b-P4VP ordered layers ideal candidates for lithography.

Effect of Molecular Organization on the Properties of Fractionated Lignin-Based Thiol-Ene Thermoset Materials.

In this study, the combination of sequential solvent fractionation of technical Kraft lignin was followed by allylation of most OH functionalities to give highly functional thermoset resins. All lignin fractions were highly functionalized on the phenolic (≥95%) and carboxylic acid OH (≥85%) and to a significant extent on the aliphatic OH moieties (between 43 and 75%). The resins were subsequently cross-linked using thiol-ene chemistry. The high amount of allyl functionalities resulted in a high cross-link density. Dynamic mechanical analysis measurements showed that the thioether content, directly related to the allyl content, strongly affects the performance of these thermosets with a glass transition temperature (Tg) between 81 and 95 °C and with a storage modulus between 1.9 and 3.8 GPa for all thermosets. The lignin fractions and lignin-based thermosets' morphology, at the nanoscale, was studied by wide-angle X-ray scattering measurements. Two π-π stacking interactions were observed: sandwich (≈4.1-4.7 Å) and T-shaped (≈5.5-7.2 Å). The introduction of allyl functionalities weakens the T-shaped π-π stacking interactions. A new signal corresponding to a distance of ≈3.5 Å was observed in lignin-based thermosets, which was attributed to a thioether organized structure. At the same time, a lignin superstructure was observed with a distance/size corresponding to 7.9-17.5 Å in all samples.

Investigating the thermal stability of ultra-small Ag, Au and AuAg alloy nanoparticles embedded in a silica matrix.

Thermal growth kinetics of embedded bimetallic (AuAg/SiO2) nanoparticles are explored and compared with their monometallic (Au/SiO2 and Ag/SiO2) counterparts, as their practical applicability demands stability and uniformity. The plasmonic properties of these nanoparticles (NPs) significantly improve when their size falls in the ultra-small region (diameter < 10 nm), owing to their large active surface area. Interestingly, the bimetallic NPs exhibit better optical properties and structural stability as compared to their monometallic counterparts. This calls for a thorough understanding of the nucleation and temperature-dependent growth to ensure size stability against thermal coarsening that most bimetallic NPs completely lack. Herein, the atom beam sputtered AuAg NPs are systematically analysed over a wide range of annealing temperatures (ATs), and the results are compared with those of Au and Ag NPs. The X-ray photoelectron spectroscopy spectra and other experimental results confirm the formation of AuAg alloy NPs inside the silica matrix. Furthermore, techniques like transmission electron microscopy and grazing-incidence small-/wide-angle X-ray scattering were used to explore the temperature-dependent structural and morphological stability of the NPs. Our results show that the deposited AuAg NPs retain their spherical shape and remain as an alloy for the entire range of ATs. When the AT increases from 25 °C to 800 °C, the size of the NPs also increases from 3.5 to 4.8 nm; beyond that, their size grows substantially to 13.6 nm at 900 °C. We observed that the NPs remain in the ultra-small size range (∼5 nm) until an AT of 800 °C. Beyond that Ostwald ripening is ascribed to be the major cause of particle growth, resulting in an active surface area loss. Based on the outcomes, a three-step nucleation and growth mechanism is proposed.

In Situ Study of Structure Formation under Stress in Stretchable Conducting Nanocomposites.

One of the major limitations of flexible sensors is the loss of conductivity upon multiple stretching and bending cycles. Conducting fillers with two different geometries, carbon black and carbon nanotubes, were introduced in polydimethylsiloxane (PDMS) for physical insights into the structure formation of nanofillers by the application of periodic tensile stress. The loading of the nanofillers was selected beyond the percolation threshold to determine the cyclic stability of the resulting network channels. The surface chemistry of carbon nanotubes has been varied to understand the interfacial interactions at the molecular length scale. The combination of in situ stretching, annealing, and vis-à-vis conductometry of nanocomposite films with synchrotron-based ultra-small angle X-ray scattering experiments enables us to highlight the importance of the fractal dimensions of nanofillers for the molecular level interactions. The irreversible formation of nanofiller network geometries under cyclic stress and annealing was found to be responsible for the electrical properties of a flexible conducting film.

Correction: Luedemann et al. Prostate Cancer-Associated miRNAs in Saliva: First Steps to an Easily Accessible and Reliable Screening Tool. Biomolecules 2022, 12, 1366.

The authors wish to make the following corrections to their paper [...].

Hydrostatic pressure of the renal pelvis as a radiation-free alternative to fluoroscopic nephrostogram following percutaneous nephrolithotomy.

BACKGROUND: We evaluated the hydrostatic pressure of the renal pelvis (RPP) as a radiation-free alternative to fluoroscopic nephrostogram to assess ureteral patency after percutaneous nephrolithotomy (PCNL). METHODS: Retrospective non-inferiority study analyzing 248 PCNL-patients (86 female (35%) and 162 males (65%)) between 2007 and 2015. Postoperatively, RPP was measured using a central venous pressure manometer in cmH2O. The primary endpoint was to assess RPP depending on the patency of the ureter and the nephrostomy tube removal. Secondary, the upper limit of normal RPP of [Formula: see text] 20 cmH2O was assessed as an indicator of an unobstructed patency. RESULTS: The median procedure duration was 141 min (112-171.5) with a stone free rate of 82% (n = 202). RPP was significantly higher in patients with obstructive nephrostogram with 25.0 mmH2O (21.0-32.0) versus 20.0 mmH2O (16.0-24.0; p < 0.001). The pressure was lower in successful nephrostomy removal with 18 cmH2O (15-21) versus 23 cmH2O (20-29) in the leakage group (p < 0.001). The analysis of a cut-off of [Formula: see text] 20 cmH2O showed a sensitivity of 76.9% (95% CI [60.7%; 88.9%]) and a specificity of 61.5% (95% CI [54.6%; 68.2%]). The negative predictive value was 93.4% (95% CI: [87.9%; 97.0%]) and the positive predictive value 27.3% (95% CI [19.2%; 36.6%]). The accuracy of the model showed an AUC = 0.795 (95% CI [0.668; 0.862]). CONCLUSION: The hydrostatic RPP seems to allow a bedside evaluation of ureteral patency after PCNL.

Seam Properties of Overlap Welding Strategies from Copper to Aluminum Using Green Laser Radiation for Battery Tab Connections in Electric Vehicles.

Laser beam welding of metals has progressed dramatically over the last years mainly arising from joining applications in the field of electromobility. Allowing the flexible, automated manufacturing of mechanically, electrically, and thermally stressed components, the process is more frequently applied for joining highly reflective materials, for example for battery tab and busbar connections. The local, non-contact energy input favors this welding technology; however, joining of copper and aluminum sheets still poses a challenge due to the physical properties of the joining partners and intermetallic phases from dissimilar metal interaction, which reduce seam performance. The use of green laser radiation compared to infrared laser radiation offers the advantage of a significantly increased absorptivity for copper materials. A changed incoupling behavior is observed, and a lower deep penetration threshold has been already proven for 515 nm wavelength. When copper and aluminum are welded with the former as top sheet, this welding mode is essential to overcome limited aspect ratios from heat conduction welding. However, the opportunities of applying these beam sources in combination with spatial power modulation to influence the interconnection area of copper-aluminum joints have not yet been studied. The aim of this work is therefore to investigate the seam properties and process stability of different overlap welding strategies using green laser radiation for dissimilar metal welding. A microstructural analysis of the different fusion zones and mechanical strength of the joints are presented. In addition, the experimental parameter sets were analyzed regarding their application in battery module busbars by examining the electrical resistance and temperature distribution after welding. A parameter window was identified for all investigated welding strategies, with the stitched seam achieving the most stable results.

Superlattice deformation in quantum dot films on flexible substrates via uniaxial strain.

The superlattice in a quantum dot (QD) film on a flexible substrate deformed by uniaxial strain shows a phase transition in unit cell symmetry. With increasing uniaxial strain, the QD superlattice unit cell changes from tetragonal to cubic to tetragonal phase as measured with in situ grazing-incidence small-angle X-ray scattering (GISAXS). The respective changes in the optoelectronic coupling are probed with photoluminescence (PL) measurements. The PL emission intensity follows the phase transition due to the resulting changing inter-dot distances. The changes in PL intensity accompany a redshift in the emission spectrum, which agrees with the Förster resonance energy transfer (FRET) theory. The results are essential for a fundamental understanding of the impact of strain on the performance of flexible devices based on QD films, such as wearable electronics and next-generation solar cells on flexible substrates.