RESUMEN
This study investigates a salt design principle for aqueous battery electrolytes by combining chaotropic ions, guanidium cations (Gdm) and bis(trifluoromethanesulfonyl)imide anions (TFSI), forming GdmTFSI. This salt's crystal structure was solved via single-crystal X-ray diffraction and characterized using Fourier-transform infrared spectroscopy. Study reveals that GdmTFSI salt disrupts the hydrogen bonding network of aqueous solutions, impacting water reactivity at electrochemical interfaces.
RESUMEN
The search for efficient anodic electrochromic materials is essential to the development of electrochromic devices, such as smart windows. Magnetron-sputtered lithium-nickel-tungsten mixed oxides are good candidates to tackle this issue; however, they display a complicated microstructure, making it difficult to pinpoint the origin of their electro-optical properties. Herein, by exploring the Li2O-NiO-WO3 phase diagram, we obtained a new phase, Li2Ni2W2O9, that crystallizes in the orthorhombic Pbcn space group. This material can reversibly uptake/release 0.75 Li+ (31 mA h·g-1) when cycled between 2.5 and 5.0 V versus Li+/Li. Moreover, through operando optical microscopy, we show that this new phase is electrochromic, and crucial information can be accessed about the diffusion-limited insertion of lithium at the single-particle scale. This study sets the ground for future syntheses of electrochemically active materials crystallizing in the ramsayite structure and details how the electrochromic properties of battery materials can be used to shed some light on their electrochemical mechanisms.
RESUMEN
Mixed-anion compounds widen the chemical space of attainable materials compared to single anionic compounds, but the exploration of their structural diversity is limited by common synthetic paths. Especially, oxychlorides rely mainly on layered structures, which suffer from low stability during photo(electro)catalytic processes. Herein we report a strategy to design a new polar 3D tetrahedral framework with composition Zn4 Si2 O7 Cl2 . We use a molten salt medium to enable low temperature crystallization of nanowires of this new compound, by relying on tetrahedral building units present in the melt to build the connectivity of the oxychloride. These units are combined with silicon-based connectors from a non-oxidic Zintl phase to enable precise tuning of the oxygen content. This structure brings high chemical and thermal stability, as well as strongly anisotropic hole mobility along the polar axis. These features, associated with the ability to adjust the transport properties by doping, enable to tune water splitting properties for photoelectrocatalytic H2 evolution and water oxidation. This work then paves the way to a new family of mixed-anion solids.
Asunto(s)
Nanoestructuras , Cloruro de Sodio/química , Aniones/química , Nanoestructuras/química , Zinc/química , Dióxido de Silicio/química , Cloruros/química , Catálisis , Electroquímica/métodosRESUMEN
Crystal structures can strongly deviate from bulk states when confined into nanodomains. These deviations may deeply affect properties and reactivity and then call for a close examination. In this work, we address the case where extended crystal defects spread through a whole solid and then yield an aperiodic structure and specific reactivity. We focus on iron boride, α-FeB, whose structure has not been elucidated yet, thus hindering the understanding of its properties. We synthesize the two known phases, α-FeB and ß-FeB, in molten salts at 600 and 1100 °C, respectively. The experimental X-ray diffraction (XRD) data cannot be satisfactorily accounted for by a periodic crystal structure. We then model the compound as a stochastic assembly of layers of two structure types. Refinement of the powder XRD pattern by considering the explicit scattering interference of the different layers allows quantitative evaluation of the size of these domains and of the stacking faults between them. We, therefore, demonstrate that α-FeB is an intergrowth of nanometer-thick slabs of two structure types, ß-FeB and CrB-type structures, in similar proportions. We finally discuss the implications of this novel structure on the reactivity of the material and its ability to perform insertion reactions by comparing the reactivities of α-FeB and ß-FeB as reagents in the synthesis of a model layered material: Fe2AlB2. Using synchrotron-based in situ X-ray diffraction, we elucidate the mechanisms of the formation of Fe2AlB2. We highlight the higher reactivity of the intergrowth α-FeB in agreement with structural relationships.
RESUMEN
Gas-fed zero-gap electrolyzers have recently emerged as attractive systems for limiting ohmic losses and costs associated with electrolytes and for optimizing energy efficiencies. Here, we report that using a dendritic Cu oxide (D-CuO) material deposited on a gas diffusion layer as the cathode of a gas-fed zero-gap membrane electrode assembly (MEA) system results in a very selective conversion of CO to ethylene. More specifically, CO reduction yielded ethylene with an FE up to 68% at 100-125 mA·cm-2 with H2 as the only other gaseous product and the electrolysis could be carried out for several hours with good stability. Ethylene was also the major product during CO2 electrolysis (FE = 41%) at 125-150 mA·cm-2, reflecting the high selectivity of D-CuO for ethylene production. Such systems are relevant for tandem CO2 electroreduction processes, allowing energy efficiencies above 30%.
RESUMEN
Li-ion batteries are the electrochemical energy storage technology of choice of today's electrical vehicles and grid applications with a growing interest for Na-ion and K-ion systems based on either aqueous or non-aqueous electrolyte for power, cost, and sustainable reasons. The rate capability of alkali-metal-ion batteries is influenced by ion transport properties in the bulk of the electrolyte, as well as by diverse effects occurring at the vicinity of the electrode and electrolyte interface. Therefore, identification of the predominant factor affecting the rate capability of electrodes still remains a challenge and requires suitable experimental and computational methods. Herein, we investigate the mechanistic of the K+ insertion process in the Prussian blue phase, Fe4III[FeII(CN)6]3 in both aqueous and non-aqueous electrolytes, which reveals drastic differences. Through combined electrochemical characterizations, electrochemical-quartz-crystal-microbalance and ac-electrogravimetric analyses, we provide evidences that what matters the most for fast ion transport is the positioning of the partially solvated cations adsorbed at the material surface in aqueous as opposed to non-aqueous electrolytes. We rationalized such findings by molecular dynamics simulations that establish the K+ repartition profile within the electrochemical double layer. A similar trend was earlier reported by our group for the aqueous versus non-aqueous insertion of Li+ into LiFePO4. Such a study unveils the critical but overlooked role of the electrode-electrolyte interface in ruling ion transport and insertion processes. Tailoring this interface structuring via the proper salt-solvent interaction is the key to enabling the best power performances in alkali-metal-ion batteries.
RESUMEN
Expanding the chemical space for designing novel anionic redox materials from oxides to sulfides has enabled to better apprehend fundamental aspects dealing with cationic-anionic relative band positioning. Pursuing with chalcogenides, but deviating from cationic substitution, we here present another twist to our band positioning strategy that relies on mixed ligands with the synthesis of the Li2TiS3-xSex solid solution series. Through the series the electrochemical activity displays a bell shape variation that peaks at 260 mAh/g for the composition x = 0.6 with barely no capacity for the x = 0 and x = 3 end members. We show that this capacity results from cumulated anionic (Se2-/Sen-) and (S2-/Sn-) and cationic Ti3+/Ti4+ redox processes and provide evidence for a metal-ligand charge transfer by temperature-driven electron localization. Moreover, DFT calculations reveal that an anionic redox process cannot take place without the dynamic involvement of the transition metal electronic states. These insights can guide the rational synthesis of other Li-rich chalcogenides that are of interest for the development of solid-state batteries.
RESUMEN
Anionic redox is a double-edged sword for Li-ion cathodes because it offers a transformational increase in energy density that is also negated by several detrimental drawbacks to its practical implementation. Among them, voltage hysteresis is the most troublesome because its origin is still unclear and under debate. Herein, we tackle this issue by designing a prototypical Li-rich cation-disordered rock-salt compound Li1.17Ti0.33Fe0.5O2 that shows anionic redox activity and exceptionally large voltage hysteresis while exhibiting a partially reversible Fe migration between octahedral and tetrahedral sites. Through combined in situ and ex situ spectroscopic techniques, we demonstrate the existence of a non-equilibrium (adiabatic) redox pathway enlisting Fe3+/Fe4+ and O redox as opposed to the equilibrium (non-adiabatic) redox pathway involving sole O redox. We further show that the charge transfer from O(2p) lone pair states to Fe(3d) states involving sluggish structural distortion is responsible for voltage hysteresis. This study provides a general understanding of various voltage hysteresis signatures in the large family of Li-rich rock-salt compounds.
RESUMEN
The reaction between P2-type honeycomb layered oxides Na2Ni2TeO6 and K2Ni2TeO6 enables the formation of NaKNi2TeO6. The compound is characterized by X-ray diffraction and 23Na solid-state nuclear magnetic resonance spectroscopy, and the structure is discussed through density functional theory calculations. In addition to the honeycomb Ni/Te cationic ordering, NaKNi2TeO6 exhibits a unique example of alternation of sodium and potassium layers instead of a random alkali-mixed occupancy. Stacking fault simulations underline the impact of the successive position of the Ni/Te honeycomb layers and validate the presence of multiple stacking sequences within the powder material, in proportions that evolve with the synthesis conditions. In a broader context, this work contributes to a better understanding of the alkali-mixed layered compounds.
RESUMEN
Insertion compounds provide the fundamental basis of today's commercialized Li-ion batteries. Throughout history, intense research has focused on the design of stellar electrodes mainly relying on layered oxides or sulfides, and leaving aside the corresponding halides because of solubility issues. This is no longer true. In this work, we show the feasibility of reversibly intercalating Li+ electrochemically into VX3 compounds (X = Cl, Br, I) via the use of superconcentrated electrolytes (5 M LiFSI in dimethyl carbonate), hence opening access to a family of LixVX3 phases. Moreover, through an electrolyte engineering approach, we unambiguously prove that the positive attribute of superconcentrated electrolytes against the solubility of inorganic compounds is rooted in a thermodynamic rather than a kinetic effect. The mechanism and corresponding impact of our findings enrich the fundamental understanding of superconcentrated electrolytes and constitute a crucial step in the design of novel insertion compounds with tunable properties for a wide range of applications including Li-ion batteries and beyond.
Asunto(s)
Electrólitos , Litio , Suministros de Energía Eléctrica , Electroquímica , Electrodos , Electrólitos/química , Litio/químicaRESUMEN
Boron-rich solids exhibit specific crystal structures and unique properties, which are only very scarcely addressed in nanoparticles. In this work, we address the original inorganic structural chemistry and reactivity of boron-rich nanoparticles, by reporting the first occurrence of sodium carbaboride nanocrystals based on the NaB5C crystal structure. To design these sub-10 nm nano-objects, we use liquid-phase synthesis in molten salts at 900 °C. By combining a set of characterization tools including powder X-ray powder diffraction, transmission electron microscopy, solid-state nuclear magnetic resonance coupled to DFT modeling, and X-ray photoelectron spectroscopy, we demonstrate that these nanocrystals deviate from the ideal stoichiometry reported for the bulk compound. We suggest that the carbon and sodium contents compensate each other to ensure that the octahedral cluster-based framework is stabilized by fulfilling an electron counting rule. These nanocrystals encompass substituted octahedral covalent structural building units not reported in the related bulk compound. They then shed new light on the ability of nanoparticles to host wide solid solution ranges in covalent solids and then to yield new solids. We finally show that these nanocrystals are efficient single sources of boron and carbon to form a nanostructured boron carbide, thus paving the way to new nanostructured materials.
RESUMEN
Sodium ion batteries, because of their sustainability attributes, could be an attractive alternative to Li-ion technology for specific applications. However, it remains challenging to design high energy density and moisture stable Na-based positive electrodes. Here, we report an O3-type NaLi1/3Mn2/3O2 phase showing anionic redox activity, obtained through a ceramic process by carefully adjusting synthesis conditions and stoichiometry. This phase shows a sustained reversible capacity of 190 mAh g-1 that is rooted in cumulative oxygen and manganese redox processes as deduced by combined spectroscopy techniques. Unlike many other anionic redox layered oxides so far reported, O3-NaLi1/3Mn2/3O2 electrodes do not show discernible voltage fade on cycling. This finding, rationalized by density functional theory, sheds light on the role of inter- versus intralayer 3d cationic migration in ruling voltage fade in anionic redox electrodes. Another practical asset of this material stems from its moisture stability, hence facilitating its handling and electrode processing. Overall, this work offers future directions towards designing highly performing sodium electrodes for advanced Na-ion batteries.
RESUMEN
Solid electrolytes have regained tremendous interest recently in light of the exposed vulnerability of current rechargeable battery technologies. While designing solid electrolytes, most efforts concentrated on creating structural disorder (vacancies, interstitials, etc.) in a cationic Li/Na sublattice to increase ionic conductivity. In phosphates, the ionic conductivity can also be increased by rotational disorder in the anionic sublattice, via a paddle-wheel mechanism. Herein, we report on Na4Zn(PO4)2 which is designed from Na3PO4, replacing Na+ with Zn2+ and introducing a vacancy for charge balance. We show that Na4Zn(PO4)2 undergoes a series of structural transitions under temperature, which are associated with an increase in ionic conductivity by several orders of magnitude. Our detailed crystallographic study, combining electron, neutron, and X-ray powder diffraction, reveals that the room-temperature form, α-Na4Zn(PO4)2, contains orientationally ordered PO4 groups, which undergo partial and full rotational disorder in the high-temperature ß- and γ-polymorphs, respectively. We furthermore showed that the highly conducting γ-polymorph could be stabilized at room temperature by ball-milling, whereas the ß-polymorph can be stabilized by partial substitution of Zn2+ with Ga3+ and Al3+. These findings emphasize the role of rotational disorder as an extra parameter to design new solid electrolytes.
RESUMEN
High-energy-density lithium-rich materials are of significant interest for advanced lithium-ion batteries, provided that several roadblocks, such as voltage fade and poor energy efficiency are removed. However, this remains challenging as their functioning mechanisms during first cycle are not fully understood. Here we enlarge the cycling potential window for Li1.2Ni0.13Mn0.54Co0.13O2 electrode, identifying novel structural evolution mechanism involving a structurally-densified single-phase A' formed under harsh oxidizing conditions throughout the crystallites and not only at the surface, in contrast to previous beliefs. We also recover a majority of first-cycle capacity loss by applying a constant-voltage step on discharge. Using highly reducing conditions we obtain additional capacity via a new low-potential P" phase, which is involved into triggering oxygen redox on charge. Altogether, these results provide deeper insights into the structural-composition evolution of Li1.2Ni0.13Mn0.54Co0.13O2 and will help to find measures to cure voltage fade and improve energy efficiency in this class of material.
RESUMEN
The production of hydrogen at a large scale by the environmentally-friendly electrolysis process is currently hampered by the slow kinetics of the oxygen evolution reaction (OER). We report a solid electrocatalyst α-Li2IrO3 which upon oxidation/delithiation chemically reacts with water to form a hydrated birnessite phase, the OER activity of which is five times greater than its non-reacted counterpart. This reaction enlists a bulk redox process during which hydrated potassium ions from the alkaline electrolyte are inserted into the structure while water is oxidized and oxygen evolved. This singular charge balance process for which the electrocatalyst is solid but the reaction is homogeneous in nature allows stabilizing the surface of the catalyst while ensuring stable OER performances, thus breaking the activity/stability tradeoff normally encountered for OER catalysts.
RESUMEN
With increasing hopes placed on the Na-ion battery technology to complement the current Li-ion battery systems, it is important to improve the energy density of Na-based cathode materials. Na-rich rocksalt oxides, Na1+xM1-xO2 (M = transition metal), combining cationic and anionic redox activity, could provide the necessary increase in capacity to achieve this goal, but their synthesis remains challenging compared to the Li analogues. As an alternative, mixed compounds Na(AxM1-x)O2, with A being an electropositive cation such as Li, Mg, or Zn sitting in the transition-metal layer, have been reported. As a continuation, we herein prepared the mixed Na(Li1/3Ir2/3)O2 phase and compared its structure and electrochemical properties with the well-known Li2IrO3 and Na2IrO3 parent materials. By mixing Na and Li in the material, the stacking sequence of the transition-metal honeycomb layers in Na(Li1/3Ir2/3)O2 is modified compared to the two parent materials, resulting in the presence of extra superstructure peaks in X-ray diffraction data. Using electrochemical characterization and an in-situ X-ray diffraction technique, the mixed Na(Li1/3Ir2/3)O2 was found to be unstable both in Li and Na batteries and to separate into Na-rich NaxIrO3 and Li-rich LixIrO3 phases due to the competition between electrochemical (de)insertion, cation exchange with the electrolyte, and segregation of Na and Li in the material. These findings highlight important challenges and offer useful insight into guide the design of new mixed Na(AxM1-x)O2 cathode materials with high capacity for Na-ion batteries.
RESUMEN
Layered oxide compositions Li3-xNaxNi2SbO6 have been prepared by solid-state synthesis. A complete solid solution is evidenced and characterized by X-ray and neutron diffraction as well as 7Li and 23Na solid-state nuclear magnetic resonance spectroscopy. The transition-metal layer is characterized by the classic honeycomb Ni2+/Sb5+ ordering, whereas a more uncommon randomly mixed occupancy of lithium and sodium is evidenced within the alkali interslab space. In situ X-ray diffraction and density functional theory calculations show that this alkali disordered feature is entropically driven. Fast cooling then appears as a synthesis root to confine bidimensional alkali glass within crystalline layered oxides.
RESUMEN
Disordered rock salt cathodes showing both anionic and cationic redox are being extensively studied for their very high energy storage capacity. Mn-based disordered rock salt compounds show much higher energy efficiency compared to the Ni-based materials as a result of the different voltage hysteresis, 0.5 and 2 V, respectively. To understand the origin of this difference, we herein report the design of two model compounds, Li1.3Ni0.27Ta0.43O2 and Li1.3Mn0.4Ta0.3O2, and study their charge compensation mechanism through the uptake and removal of Li via an arsenal of analytical techniques. We show that the different voltage hysteresis with Ni or Mn substitution is due to the different reduction potential for anionic redox. We rationalized such a finding by DFT calculations and propose this phenomenon to be nested in the smaller charge transfer band gap of the Ni-based compounds compared to that of the Mn ones. Altogether, these findings provide vital guidelines for designing high-capacity disordered rock salt cathode materials based on anionic redox activity for the next generation of Li ion batteries.
RESUMEN
The growing need to store an increasing amount of renewable energy in a sustainable way has rekindled interest for sodium-ion battery technology, owing to the natural abundance of sodium. Presently, sodium-ion batteries based on Na3V2(PO4)2F3/C are the subject of intense research focused on improving the energy density by harnessing the third sodium, which has so far been reported to be electrochemically inaccessible. Here, we are able to trigger the activity of the third sodium electrochemically via the formation of a disordered NaxV2(PO4)2F3 phase of tetragonal symmetry (I4/mmm space group). This phase can reversibly uptake 3 sodium ions per formula unit over the 1 to 4.8 V voltage range, with the last one being re-inserted at 1.6 V vs Na+/Na0. We track the sodium-driven structural/charge compensation mechanism associated to the new phase and find that it remains disordered on cycling while its average vanadium oxidation state varies from 3 to 4.5. Full sodium-ion cells based on this phase as positive electrode and carbon as negative electrode show a 10-20% increase in the overall energy density.
RESUMEN
Alloying strategies are commonly used to design electrocatalysts that take on properties of their constituent elements. Herein, such a strategy is used to develop Zn-Cu alloyed electrodes with unique hierarchical porosity and tunable selectivity for CO2 versus H+ reduction. By varying the Zn/Cu ratio, tailored syngas mixtures are obtained without the production of other gaseous products, which is attributed to preferential CO- and H2 -forming pathways on the alloys. The syngas ratios are also significantly less sensitive to the applied potential in the alloys relative to pure metal equivalents; an essential quality when coupling electrocatalysis with renewable power sources that have fluctuating intensity. As such, industrially relevant syngas ratios are achieved at large currents (-60â mA) for extensive operating times (>9â h), demonstrating the potential of this strategy for fossil-free fuel production.