ARKA: a framework of dimensionality reduction for machine-learning classification modeling, risk assessment, and data gap-filling of sparse environmental toxicity data.

Due to the lack of experimental toxicity data for environmental chemicals, there arises a need to fill data gaps by in silico approaches. One of the most commonly used in silico approaches for toxicity assessment of small datasets is the Quantitative Structure-Activity Relationship (QSAR), which generates predictive models for the efficient prediction of query compounds. However, the reliability of the predictions from QSARs derived from small datasets is often questionable from a statistical point of view. This is due to the presence of a larger number of descriptors as compared to the number of training compounds, which reduces the degree of freedom of the developed model. To reduce the overall prediction error for a particular QSAR model, we have proposed here the computation of the novel Arithmetic Residuals in K-groups Analysis (ARKA) descriptors. We have reduced the number of modeling descriptors in a supervised manner by partitioning them into K classes (K = 2 here) depending on the higher mean normalized values of the descriptors to a particular response class, thus preventing the loss of chemical information. A scatter plot of the data points using the values of two ARKA descriptors (ARKA_2 vs. ARKA_1) can potentially identify activity cliffs, less confident data points, and less modelable data points. We have used here five representative environmentally relevant endpoints (skin sensitization, earthworm toxicity, milk/plasma partitioning, algal toxicity, and rodent carcinogenicity of hazardous chemicals) with graded responses to which the ARKA framework was applied for classification modeling. On comparing the performance of the models generated using conventional QSAR descriptors and the ARKA descriptors, the prediction quality of the models derived from ARKA descriptors was found, based on multiple graded-data validation metrics-derived decision criteria, much better than the models derived from QSAR descriptors signifying the potential of ARKA descriptors in ecotoxicological classification modeling of small data sets. Additionally, this holds true for the Read-Across approach as well, since the Read-Across predictions using ARKA descriptors supersede the predictions generated from QSAR descriptors. For the ease of users, a Java-based expert system has been developed that computes the ARKA descriptors from the input of QSAR descriptors.

Quantitative read-across structure-activity relationship (q-RASAR): A novel approach to estimate the subchronic oral safety (NOAEL) of diverse organic chemicals in rats.

We have developed a quantitative safety prediction model for subchronic repeated doses of diverse organic chemicals on rats using the novel quantitative read-across structure-activity relationship (q-RASAR) approach, which uses similarity-based descriptors for predictive model generation. The experimental -Log (NOAEL) values have been used here as a potential indicator of oral subchronic safety on rats as it determines the maximum dose level for which no observed adverse effects of chemicals are found. A total of 186 data points of diverse organic chemicals have been used for the model generation using structural and physicochemical (0D-2D) descriptors. The read-across-derived similarity, error, and concordance measures (RASAR descriptors) have been extracted from the preliminary 0D-2D descriptors. Then, the combined pool of RASAR and the identified 0D-2D descriptors of the training set were employed to develop the final models by using the partial least squares (PLS) algorithm. The developed PLS model was rigorously validated by various internal and external validation metrics as suggested by the Organization for Economic Co-operation and Development (OECD). The final q-RASAR model is proven to be statistically sound, robust and externally predictive (R2 = 0.85, Q2LOO = 0.82 and Q2F1 = 0.94), superseding the internal as well as external predictivity of the corresponding quantitative structure-activity relationship (QSAR) model as well as previously reported subchronic repeated dose toxicity model found in the literature. In a nutshell, the q-RASAR is an effective approach that has the potential to be used as a good alternative way to improve external predictivity, interpretability, and transferability for subchronic oral safety prediction as well as ecotoxicity risk identification.

Breaking the Barriers: Machine-Learning-Based c-RASAR Approach for Accurate Blood-Brain Barrier Permeability Prediction.

The intricate nature of the blood-brain barrier (BBB) poses a significant challenge in predicting drug permeability, which is crucial for assessing central nervous system (CNS) drug efficacy and safety. This research utilizes an innovative approach, the classification read-across structure-activity relationship (c-RASAR) framework, that leverages machine learning (ML) to enhance the accuracy of BBB permeability predictions. The c-RASAR framework seamlessly integrates principles from both read-across and QSAR methodologies, underscoring the need to consider similarity-related aspects during the development of the c-RASAR model. It is crucial to note that the primary goal of this research is not to introduce yet another model for predicting BBB permeability but rather to showcase the refinement in predicting the BBB permeability of organic compounds through the introduction of a c-RASAR approach. This groundbreaking methodology aims to elevate the accuracy of assessing neuropharmacological implications and streamline the process of drug development. In this study, an ML-based c-RASAR linear discriminant analysis (LDA) model was developed using a dataset of 7807 compounds, encompassing both BBB-permeable and -nonpermeable substances sourced from the B3DB database (freely accessible from https://github.com/theochem/B3DB), for predicting BBB permeability in lead discovery for CNS drugs. The model's predictive capability was then validated using three external sets: one containing 276,518 natural products (NPs) from the LOTUS database (accessible from https://lotus.naturalproducts.net/download) for data gap filling, another comprising 13,002 drug-like/drug compounds from the DrugBank database (available from https://go.drugbank.com/), and a third set of 56 FDA-approved drugs to assess the model's reliability. Further diversifying the predictive arsenal, various other ML-based c-RASAR models were also developed for comparison purposes. The proposed c-RASAR framework emerged as a powerful tool for predicting BBB permeability. This research not only advances the understanding of molecular determinants influencing CNS drug permeability but also provides a versatile computational platform for the rapid assessment of diverse compounds, facilitating informed decision-making in drug development and design.

Chemometric modeling of pharmaceuticals for partitioning between sludge and aqueous phase during the wastewater treatment process.

Computational techniques, such as quantitative structure-property relationships (QSPRs), can play a significant role in exploring the important chemical features essential for the degree of sorption or sludge/water partition coefficient (Kd) towards sewage sludge of wastewater treatment process to evaluate the environmental consequence and risk of pharmaceuticals. The current research work aims to construct a predictive QSPR model for the sorption of 148 diverse active pharmaceutical ingredients (APIs) in sewage sludge during wastewater treatment. For the development of the model, we employed easily computable 2D descriptors as independent variables. The model has been developed following the Organization for Economic Cooperation and Development's (OECD) guidelines. It has undergone internal and external validation using a variety of methodologies, as well as been tested for its applicability domain. A measure of hydrophobicity, i.e., MLOGP2, showed the most promising contribution in modeling the sorption coefficient of APIs. Among other parameters, the number of tertiary aromatic amines, the presence of electronegative atoms like N, O, and Cl, the size of a molecule, the number of aromatic hydroxyl groups, the presence of substituted aromatic nitrogen atoms and alkyl-substituted tertiary carbon atoms were also found to be influential for the regulation of solid water partition coefficient of APIs during the wastewater treatment process. The statistical validity tests performed on the developed partial least squares (PLS) model showed that it is statistically evident, robust, and predictive (R2Train = 0.750, Q2LOO = 0.683, Q2F1 = 0.655, Q2F2 (or R2Test) = 0.651). In addition, the predictivity of the constructed model was further inspected by using the "prediction reliability indicator" tool for 14 external APIs.

The first report on the assessment of maximum acceptable daily intake (MADI) of pesticides for humans using intelligent consensus predictions.

Direct or indirect consumption of pesticides and their related products by humans and other living organisms without safe dosing may pose a health risk. The risk may arise after a short/long time which depends on the nature and amount of chemicals consumed. Therefore, the maximum acceptable daily intake of chemicals must be calculated to prevent these risks. In the present work, regression-based quantitative structure-activity relationship (QSAR) models were developed using 39 pesticides with maximum acceptable daily intake (MADI) for humans as the endpoint. From the statistical results (R2 = 0.674-0.712, QLOO2 = 0.553-0.580, Q(F1)2 = 0.544-0.611, and Q(F2)2 = 0.531-0.599), it can be inferred that the developed models were robust, reliable, reproducible, accurate, and predictive. Intelligent Consensus Prediction (ICP) was employed to improve the external predictivity (Q(F1)2 =0.579-0.657 and Q(F2)2 = 0.563-0.647) of the models. Some of the chemical markers responsible for toxicity enhancement are the presence of unsaturated bonds, lipophilicity, presence of C< (double bond-single bond-single bonded carbon), and the presence of sulphur and phosphate bonds at the topological distances 1 and 6, while the presence of hydrophilic groups and short chain fragments reduces the toxicity. The Pesticide Properties Database (PPDB) (1694 pesticides) was also screened with the developed models. Hence, this research work will be helpful for the toxicity assessment of pesticides before their synthesis, the development of eco-friendly and safer pesticides, and data-gap filling reducing the time, cost, and animal experimentation. Thus, this study might hold promise for future potential MADI assessment of pesticides and provide a meaningful contribution to the field of risk assessment.

Exploring the relationships between physiochemical properties of nanoparticles and cell damage to combat cancer growth using simple periodic table-based descriptors.

A comprehensive knowledge of the physical and chemical properties of nanomaterials (NMs) is necessary to design them effectively for regulated use. Although NMs are utilized in therapeutics, their cytotoxicity has attracted great attention. Nanoscale quantitative structure-property relationship (nano-QSPR) models can help in understanding the relationship between NMs and the biological environment and provide new ways for modeling the structural properties and bio-toxic effects of NMs. The goal of the study is to construct fully validated property-based models to extract relevant features for estimating and influencing the zeta potential and obtaining the toxicity profile regarding cell damage in the treatment of cancer cells. To achieve this, QSPR modeling was first performed with 18 metal oxide (MeOx) NMs to measure their materials properties using periodic table-based descriptors. The features obtained were later applied for zeta potential calculation (imputation for sparse data) for MeOx NMs that lack such information. To further clarify the influence of the zeta potential on cell damage, a QSPR model was developed with 132 MeOx NMs to understand the possible mechanisms of cell damage. The results showed that zeta potential, along with seven other descriptors, had the potential to influence oxidative damage through free radical accumulation, which could lead to changes in the survival rate of cancerous cells. The developed QSPR and quantitative structure-activity relationship models also give hints regarding safer design and toxicity assessment of MeOx NMs.

Protein-protein interaction network analysis for the identification of novel multi-target inhibitors and target miRNAs against Alzheimer's disease.

This study presents a strategy for extracting significant gene complexes and then provides prospective therapeutics for AD. In this research, a total of 7905 reports published from 1981 to 2022 were retrieved. Following a review of all those articles, only the genetic association studies on AD were considered. Finally, there is a list of 453 Alzheimer-related genes in our dataset for network analysis. To this end, an experimentally derived protein-protein interaction (PPI) network from the String database was utilized to extract four meaningful gene complexes functionally interconnected using Cytoscape v3.9.1 software. The acquired gene complexes were subjected to an enrichment analysis using the ClueGO v2.5.9 tool to emphasize the most significant biological processes and pathways. Afterward, extracted gene complexes were used to extract the drugs related to AD from DGI v3.0 database and introduce some new drugs which may be helpful for this disease. Finally, a comprehensive network that included every gene connected to each gene complex group as well as the drug targets for each gene has been shown. Moreover, molecular docking studies have been performed with the selected compounds to identify the interaction pattern with the respective targets. Finally, we proposed a list of 62 compounds as multi-targeted directed drug-like compounds with a degree value between 2 and 5 and 30 compounds as target-specific drug-like compounds, which have not been proclaimed as AD-related drugs in prior scientific and medical investigations. Then, new drugs were suggested that can be experimentally examined for future work. In addition to this, four bipartite networks representing each group's genes and target miRNAs were established to introduce target miRNAs by using the miRWalk v3 server.

Chronic aquatic toxicity assessment of diverse chemicals on Daphnia magna using QSAR and chemical read-across.

We have modeled here chronic Daphnia toxicity taking pNOEC (negative logarithm of no observed effect concentration in mM) and pEC50 (negative logarithm of half-maximal effective concentration in mM) as endpoints using QSAR and chemical read-across approaches. The QSAR models were developed by strictly obeying the OECD guidelines and were found to be reliable, predictive, accurate, and robust. From the selected features in the developed models, we have found that an increase in lipophilicity and saturation, the presence of electrophilic or electronegative or heavy atoms, the presence of sulphur, amine, and their related functionality, an increase in mean atomic polarizability, and higher number of (thio-) carbamates (aromatic) groups are responsible for chronic toxicity. Therefore, this information might be useful for the development of environmentally friendly and safer chemicals and data-gap filling as well as reducing the use of identified toxic chemicals which have chronic toxic effects on aquatic ecosystems. Approved classes of drugs from DrugBank databases and diverse groups of chemicals from the Chemical and Product Categories (CPDat) database were also assessed through the developed models.

Application of machine learning-based read-across structure-property relationship (RASPR) as a new tool for predictive modelling: Prediction of power conversion efficiency (PCE) for selected classes of organic dyes in dye-sensitized solar cells (DSSCs).

The application of various in-silico-based approaches for the prediction of various properties of materials has been an effective alternative to experimental methods. Recently, the concepts of Quantitative structure-property relationship (QSPR) and read-across (RA) methods were merged to develop a new emerging chemoinformatic tool: read-across structure-property relationship (RASPR). The RASPR method can be applicable to both large and small datasets as it uses various similarity and error-based measures. It has also been observed that RASPR models tend to have an increased external predictivity compared to the corresponding QSPR models. In this study, we have modeled the power conversion efficiency (PCE) of organic dyes used in dye-sensitized solar cells (DSSCs) by using the quantitative RASPR (q-RASPR) method. We have used relatively larger classes of organic dyes-Phenothiazines (n=207), Porphyrins (n=281), and Triphenylamines (n=229) for the modelling purpose. We have divided each of the datasets into training and test sets in 3 different combinations, and with the training sets we have developed three different QSPR models with structural and physicochemical descriptors and validated them with the corresponding test sets. These corresponding modeled descriptors were used to calculate the RASPR descriptors using a Java-based tool RASAR Descriptor Calculator v2.0 (https://sites.google.com/jadavpuruniversity.in/dtc-lab-software/home), and then data fusion was performed by pooling the previously selected structural and physicochemical descriptors with the calculated RASPR descriptors. Further feature selection algorithm was employed to develop the final RASPR PLS models. Here, we also developed different machine learning (ML) models with the descriptors selected in the QSPR PLS and RASPR PLS models, and it was found that models with RASPR descriptors superseded in external predictivity the models with only structural and physicochemical descriptors: RMSEP reduced for phenothiazines from 1.16-1.25 to 1.07-1.18, for porphyrins from 1.60-1.79 to 1.45-1.53, for triphenylamines from 1.27-1.54 to 1.20-1.47.

Predictive binary mixture toxicity modeling of fluoroquinolones (FQs) and the projection of toxicity of hypothetical binary FQ mixtures: a combination of 2D-QSAR and machine-learning approaches.

All sorts of chemicals get degraded under various environmental stresses, and the degradates coexist with the parent compounds as mixtures in the environment. Antibiotics emerge as an additional concern due to the bioactive nature of both the parent compound and degradation products and their combined exposure to the environment. Therefore, environmental risk assessment of antibiotics and their degradation products is very much necessary. In this direction, we made use of in silico new approach methodologies (NAMs) and machine-learning algorithms. In this study, we have developed a robust and predictive mixture-quantitative structure-activity relationship (QSAR) model with promising quality and predictability (internal: MAETrain = 0.085, QLOO2 = 0.849, external: MAETest = 0.090, and QF12 = 0.859) for predicting the toxicity of the mixtures of a class of antibiotics and their degradation products. To obtain the predictive model, toxicity data of 78 binary fluoroquinolone mixtures in E. coli (endpoint: log 1/IC50 in molar) have been utilized. We have used only 0D-2D descriptors to efficiently encode the structural features of mixture components without any additional complexities. The optimization of the class of mixture descriptors has been performed in this study by using three different mixing rules (linear combination of molecular contributions, the squared molecular contributions, and the norm of molecular contributions). Different machine-learning approaches namely, random forest (RF), ada boost, gradient boost (GB), extreme gradient boost (XGB), support vector machine (SVM), linear support vector machine (LSVM), and ridge regression (RR) have been employed here apart from the conventional partial least squares (PLS) regression to optimize the modeling approach. A rigorous validation protocol has been used for assessing the goodness-of-fit, robustness, and external predictability of the models. Finally, the toxicity of possible untested mixtures of different photodegradation products of fluoroquinolones has been predicted using the best model reported in this study.

Structure-guided screening of protein-protein interaction for the identification of Myc-Max heterodimer complex modulators.

De-regulation of oncogenic myelocytomatosis (c-Myc or Myc) transcription factor is one of the most common molecular anomalies encountered in human cancers, and it is typically linked to many aggressive malignancies including breast, lung, cervix, colon glioblastomas, and other haematological organs. The Myc belongs to the basic helix-loop-helix zipper protein family (bHLH-ZIP), and its dimerization with another principal interactor protein partner Myc-associated factor X (Max) is essentially required for cellular transformation, cell growth and proliferation, and transcriptional activation. Intermolecular interactions have been evaluated between hetero-dimer Myc-Max protein, which identified protein-protein interaction (PPI) specific modulators using highly précised molecular docking study followed by long-range interaction stability analyzed through molecular dynamic (MD) simulation. Moreover, ADME profile analyses have been estimated for screened hit compounds. MM-GBSA-based binding free energy (ΔG) estimations have been performed for all screened hit compounds obtained from multi-step molecular docking-based virtual screening technique. According to the employed various rigorous multi-chemometric techniques, four identified inhibitors/modulators appear to have a considerable number of intermolecular contacts with hotspot residues in the hetero-dimer interface region of the Myc-Max PPI complex. However, identified hit compounds might need further structural optimization or extensive biophysical analyses for better understanding of the molecular mechanism for exhibiting the Myc-Max PPI interface binding stability.Communicated by Ramaswamy H. Sarma.

Development of a read-across-derived classification model for the predictions of mutagenicity data and its comparison with traditional QSAR models and expert systems.

Mutagenicity is considered an important endpoint from the regulatory, environmental and medical points of view. Due to the wide number of compounds that may be of concern and the enormous expenses (in terms of time, money, and animals) associated with rodent mutagenicity bioassays, this endpoint is a major target for the development of alternative approaches for screening and prediction. The majority of old-aged expert systems and quantitative structure-activity relationship (QSAR) models may show reduced performance over time for their application on newer chemical candidates; thus, researchers constantly try to improve the modeling strategies. In our report, we initially performed traditional classification-based linear discriminant analysis (LDA) QSAR modeling using the benchmark Ames dataset of diverse chemicals (6512 compounds) to recognize the relationship between the molecules and their potential mutagenic behavior. The classical LDA QSAR model is developed from a selected set of 2D descriptors. The LDA QSAR model was developed by using a total of 31 descriptors identified from the analysis of the most discriminating features. Additionally, we have used similarity-derived features obtained from the read-across (RA) to develop an RA-based QSAR model. The developed RA-based LDA QSAR model has better predictivity, transferability, and interpretability compared to the LDA QSAR model, and it uses a very small number of descriptors compared to the classical QSAR model. Different machine learning (ML) models were also developed using the descriptors appearing in the read-across-based LDA QSAR model for comparative studies. We have checked the prediction quality of 216 true external set compounds using the novel similarity-derived RA model. The performance of the OECD toolbox is also compared with the RA-derived LDA QSAR model for a true external set. The current study aimed to explore the significance of the read-across-based algorithm and its application to the most current experimental mutagenicity data to complement already available expert systems.

Quantitative Read-across structure-activity relationship (q-RASAR): A new approach methodology to model aquatic toxicity of organic pesticides against different fish species.

We have developed quantitative toxicity prediction models for organic pesticides of agricultural importance considering different fish species using a novel quantitative Read-across structure-activity relationship (q-RASAR) approach. The current study uses experimental (Log 1/LC50) data of organic pesticides to various fish species, including Rainbow trout (RT: Oncorhynchus mykiss: 715 data points), Lepomis (LP: Lepomis macrochirus: 136 data points), and Miscellaneous (Pimephales promelas, Brachydanio rerio: 226 data points). This study has also discussed the validation of the developed models and the analysis of structural features that are important for aquatic toxicity towards fishes. The read-across-derived similarity, error, and concordance measures (RASAR descriptors) have been extracted from the preliminary 0D-2D descriptors; the combined pool of RASAR and selected 0D-2D descriptors have been used to develop the final models by employing partial least squares algorithm. All the q-RASAR models are acceptable in terms of goodness of fit, robustness, and external predictivity, superseding the quality of the respective QSAR models, as seen from the computed validation metrics. The q-RASAR is an effective approach that has the potential to be used as a good alternative way to enhance external predictivity, interpretability, and transferability for aquatic toxicity prediction as well as ecotoxicity potential identification.

Cervico-thoracic Morel-Lavallée lesion.

Morel-Lavallée lesions (MLLs) result from high-energy trauma causing separation of subcutaneous tissue from the underlying tissue, most commonly in the gluteal region or thigh.We report the case of a woman in her 40s with a fluctuant collection of the cervico-thoracic region following trauma. Further imaging identified an MLL. An orthoplastic approach resulted in non-operative management with a spinal brace. Three months from initial injury, the lesion completely resolved. She was symptom free at final follow-up and discharged.We present the only recorded case of MLL developing in the cervico-thoracic region. Management posed difficultly as no literature currently exists. We demonstrated conservative management for cervico-thoracic MLL can be effective.We have described the first documented case of cervico-thoracic MLL. MLL is not exclusive to pelvic injuries and can develop in the cervico-thoracic region. We have shown conservative management is a viable treatment of atypical MLL.

Prediction of cytotoxicity of heavy metals adsorbed on nano-TiO2 with periodic table descriptors using machine learning approaches.

Nanoparticles with their unique features have attracted researchers over the past decades. Heavy metals, upon release and emission, may interact with different environmental components, which may lead to co-exposure to living organisms. Nanoscale titanium dioxide (nano-TiO2) can adsorb heavy metals. The current idea is that nanoparticles (NPs) may act as carriers and facilitate the entry of heavy metals into organisms. Thus, the present study reports nanoscale quantitative structure-activity relationship (nano-QSAR) models, which are based on an ensemble learning approach, for predicting the cytotoxicity of heavy metals adsorbed on nano-TiO2 to human renal cortex proximal tubule epithelial (HK-2) cells. The ensemble learning approach implements gradient boosting and bagging algorithms; that is, random forest, AdaBoost, Gradient Boost, and Extreme Gradient Boost were constructed and utilized to establish statistically significant relationships between the structural properties of NPs and the cause of cytotoxicity. To demonstrate the predictive ability of the developed nano-QSAR models, simple periodic table descriptors requiring low computational resources were utilized. The nano-QSAR models generated good R2 values (0.99-0.89), Q2 values (0.64-0.77), and Q2F1 values (0.99-0.71). Thus, the present work manifests that ML in conjunction with periodic table descriptors can be used to explore the features and predict unknown compounds with similar properties.

Read-across-based intelligent learning: development of a global q-RASAR model for the efficient quantitative predictions of skin sensitization potential of diverse organic chemicals.

Environmental chemicals and contaminants cause a wide array of harmful implications to terrestrial and aquatic life which ranges from skin sensitization to acute oral toxicity. The current study aims to assess the quantitative skin sensitization potential of a large set of industrial and environmental chemicals acting through different mechanisms using the novel quantitative Read-Across Structure-Activity Relationship (q-RASAR) approach. Based on the identified important set of structural and physicochemical features, Read-Across-based hyperparameters were optimized using the training set compounds followed by the calculation of similarity and error-based RASAR descriptors. Data fusion, further feature selection, and removal of prediction confidence outliers were performed to generate a partial least squares (PLS) q-RASAR model, followed by the application of various Machine Learning (ML) tools to check the quality of predictions. The PLS model was found to be the best among different models. A simple user-friendly Java-based software tool was developed based on the PLS model, which efficiently predicts the toxicity value(s) of query compound(s) along with their status of Applicability Domain (AD) in terms of leverage values. This model has been developed using structurally diverse compounds and is expected to predict efficiently and quantitatively the skin sensitization potential of environmental chemicals to estimate their occupational and health hazards.

Prediction-Inspired Intelligent Training for the Development of Classification Read-across Structure-Activity Relationship (c-RASAR) Models for Organic Skin Sensitizers: Assessment of Classification Error Rate from Novel Similarity Coefficients.

The advancements in the field of cheminformatics have led to a reduction in animal testing to estimate the activity, property, and toxicity of query chemicals. Read-across structure-activity relationship (RASAR) is an emerging concept that utilizes various similarity functions derived from chemical information to develop highly predictive models. Unlike quantitative structure-activity relationship (QSAR) models, RASAR descriptors of a query compound are computed from its close congeners instead of the compound itself, thus targeting predictions in the model training phase. The objective of the present study is not to propose new QSAR models for skin sensitization but to demonstrate the enhancement in the quality of predictions of the skin-sensitizing potential of organic compounds by developing classification-based RASAR (c-RASAR) models. A diverse, previously curated data set was collected from the literature for which 2D descriptors were computed. The extracted essential features were then used to develop a classification-based linear discriminant analysis (LDA) QSAR model. Furthermore, from the read-across-based predictions, RASAR descriptors were calculated using the basic settings of the hyperparameters for the Laplacian Kernel-based optimum similarity measure. After feature selection, an LDA c-RASAR model was developed, which superseded the prediction quality of the LDA-QSAR model. Various other combinations of RASAR descriptors were also taken to develop additional c-RASAR models, all showing better prediction quality than the LDA QSAR model while using a lower number of descriptors. Various other machine learning c-RASAR models were also developed for comparison purposes. In this work, we have proposed and analyzed three new similarity metrics: gm_class, sm1, and sm2. The first one is an indicator variable used to generate a simple univariate c-RASAR model with good prediction ability, while the remaining two are similarity indices used to analyze possible activity cliffs in the training and test sets and are believed to play an important role in the modelability analysis of data sets.

Machine learning - based q-RASAR modeling to predict acute contact toxicity of binary organic pesticide mixtures in honey bees.

We have reported here a quantitative read-across structure-activity relationship (q-RASAR) model for the prediction of binary mixture toxicity (acute contact toxicity) in honey bees. Both the quantitative structure-activity relationship (QSAR) and the similarity-based read-across algorithms are used simultaneously for enhancing the predictability of the model. Several similarity and error-based parameters, obtained from the read-across prediction tool, have been put together with the structural and physicochemical descriptors to develop the final q-RASAR model. The calculated statistical and validation metrics indicate the goodness-of-fit, robustness, and good predictability of the partial least squares (PLS) regression model. Machine learning algorithms like ridge regression, linear support vector machine (SVM), and non-linear SVM have been used to further enhance the predictability of the q-RASAR model. The prediction quality of the q-RASAR models outperforms the previously reported quasi-SMILEs-based QSAR model in terms of external correlation coefficient (Q2F1 SVM q-RASAR: 0.935 vs. Q2VLD QSAR: 0.89). In this research, the toxicity values of several new untested binary mixtures have been predicted with the new models, and the reliability of the PLS predictions has been validated by the prediction reliability indicator tool. The q-RASAR approach can be used as reliable, complementary, and integrative to the conventional experimental approaches of pesticide mixture risk assessment.

"Data fusion" quantitative read-across structure-activity-activity relationships (q-RASAARs) for the prediction of toxicities of binary and ternary antibiotic mixtures toward three bacterial species.

Antibiotics are often found in the environment as pollutants. They are usually found as mixtures in the environment and may produce toxicity against different ecological species due to joint exposure in the sub-optimal range. Sometimes the degradation products of parent chemicals also interact with it and cause mixture toxicity. In this study, we have developed three different mixture-Quantitative Structure-Activity Relationship (mixture-QSAR) models for three different bacterial species (Vibrio fischeri, Escherichia coli, and Bacillus subtilis). The toxicity data were collected from a previous experimental report in the literature, which comprised binary and ternary mixtures of sulfonamides (SAs), sulfonamide potentiators (SAPs), and tetracyclines (TCs). We have also explored the interspecies modeling to find inter-correlation among the toxicity of these studied organisms and have developed quantitative structure activity-activity relationship (QSAAR) models by employing the "data fusion" quantitative read-across structure-activity-activity relationship (q-RASAAR) and partial least squares (PLS) regression algorithms. All the models are strictly validated using both internal and external validation tests as suggested in the OECD guidelines. Three different mixing rules have been used in this study for descriptor computations to incorporate the additive and interaction effects among the mixture components. To the best of our knowledge, this is the first report of interspecies mixture toxicity models which can predict the cellular toxicity of binary and ternary mixtures against any of the three above-mentioned organisms.

A comparative analysis of interobserver reliability and intraobserver reproducibility of the Oswestry-Bristol Classification and the Dejour Classification for trochlear dysplasia of the knee.

Aims: Classifying trochlear dysplasia (TD) is useful to determine the treatment options for patients suffering from patellofemoral instability (PFI). There is no consensus on which classification system is more reliable and reproducible for the purpose of guiding clinicians' management of PFI. There are also concerns about the validity of the Dejour Classification (DJC), which is the most widely used classification for TD, having only a fair reliability score. The Oswestry-Bristol Classification (OBC) is a recently proposed system of classification of TD, and the authors report a fair-to-good interobserver agreement and good-to-excellent intraobserver agreement in the assessment of TD. The aim of this study was to compare the reliability and reproducibility of these two classifications. Methods: In all, six assessors (four consultants and two registrars) independently evaluated 100 axial MRIs of the patellofemoral joint (PFJ) for TD and classified them according to OBC and DJC. These assessments were again repeated by all raters after four weeks. The inter- and intraobserver reliability scores were calculated using Cohen's kappa and Cronbach's α. Results: Both classifications showed good to excellent interobserver reliability with high α scores. The OBC classification showed a substantial intraobserver agreement (mean kappa 0.628; p < 0.005) whereas the DJC showed a moderate agreement (mean kappa 0.572; p < 0.005). There was no significant difference in the kappa values when comparing the assessments by consultants with those by registrars, in either classification system. Conclusion: This large study from a non-founding institute shows both classification systems to be reliable for classifying TD based on axial MRIs of the PFJ, with the simple-to-use OBC having a higher intraobserver reliability score than that of the DJC.