Exploration of Diverse Interactions of l-Methionine in Aqueous Ionic Liquid Solutions: Insights from Experimental and Theoretical Studies.

Here, we have investigated some physicochemical parameters to understand the molecular interactions by means of density (ρ) measurement, measurement of viscosity (η), refractive index(n D) measurement, and conductance and surface tension measurements between two significant aqueous ionic liquid solutions: benzyl trimethyl ammonium chloride (BTMAC) and benzyl triethyl ammonium chloride (BTEAC) in an aqueous l-methionine (amino acid) solution. The apparent molar volume (Φv), coefficient of viscosity (B), and molar refraction (R M) have been used to analyze the molecular interaction behavior associated in the solution at various concentrations and various temperatures. With the help of some important equations such as the Masson equation, the Jones-Doles equation, and the Lorentz-Lorenz equation, very significant parameters, namely, limiting apparent molar volumes (Φv 0 ), coefficient of viscosity (B), and limiting molar refraction (R M 0), respectively, are obtained. These parameters along with specific conductance (κ) and surface tension (σ) are very much helpful to reveal the solute-solvent interactions by varying the concentration of solute molecules and temperature in the solution. Analyses of Δµ1 0#, Δµ2 0#, TΔS 2 0#, ΔH 2 0#, and thermodynamic data provide us valuable information about the interactions. We note that l-Met in 0.005 molality BTEAC ionic liquid at 308.15 K shows maximum solute-solvent interaction, while l-Met in 0.001 molality BTMAC aqueous solution of ionic liquid at 298.15 K shows the minimum one. Spectroscopic techniques such as Fourier transform infrared (FTIR), 1H-NMR, and UV-vis also provide supportive information about the interactions between the ionic liquid and l-methionine in aqueous medium. Furthermore, adsorption energy, reduced density gradient (RDG), and molecular electrostatic potential (MESP) maps obtained by the application of density functional theory (DFT) have been used to determine the type of interactions, which are concordant with the experimental observations.

Synergetic effect in water treatment with mesoporous TiO2/BDD hybrid electrode.

Boron-doped diamond (BDD) electrodes have a wide potential window and can produce ozone by water electrolysis at high voltage. Though ozone has strong oxidative power (standard oxidation potential: 2.07 V vs. NHE), it cannot decompose certain types of recalcitrant organic matter completely. We developed an advanced oxidation process (AOP), in which hydroxy radicals with stronger oxidative power (standard oxidation potential: 2.85 V vs. NHE) are formed using a combination of ozone, photocatalyst, and UV. In this study, we fabricated a mesoporous TiO2/BDD hybrid electrode and examined its potential for AOPs. A synergetic effect between electrochemical water treatment and photocatalytic water treatment was observed with the hybrid electrode that did not occur with the BDD electrode.

Synthesis of Mesoporous TiO2/Boron-Doped Diamond Photocatalyst and Its Photocatalytic Activity under Deep UV Light (λ = 222 nm) Irradiation.

There is a need for highly efficient photocatalysts, particularly for water purification. In this study, we fabricated a mesoporous TiO2 thin film on a boron-doped diamond (BDD) layer by a surfactant-assisted sol-gel method, in which self-assembled amphiphilic surfactant micelles were used as an organic template. Scanning electron microscopy revealed uniform mesopores, approximately 20 nm in diameter, that were hexagonally packed in the TiO2 thin film. Wide-angle X-ray diffraction and Raman spectroscopy clarified that the framework crystallized in the anatase phase. Current⁻voltage (I⁻V) measurements showed rectification features at the TiO2/BDD heterojunction, confirming that a p⁻n hetero-interface formed. The as-synthesized mesoporous TiO2/BDD worked well as a photocatalyst, even with a small volume of TiO2 (15 mm × 15 mm × c.a. 1.5 µm in thickness). The use of deep UV light (λ = 222 nm) as a light source was necessary to enhance photocatalytic activity, due to photo-excitation occurring in both BDD and TiO2.

Citrate-Capped Hybrid Au-TiO2 Nanomaterial for Facile and Enhanced Electrochemical Hydrazine Oxidation.

Effective and facile electrochemical oxidation of chemical fuels is pivotal for fuel cell applications. Herein, we report the electrocatalytic oxidation of hydrazine on a citrate-capped Au-TiO2-modified glassy carbon electrode, which follows two different oxidation paths. These two pathways of hydrazine oxidation are ascribed to occur on Au and the activated TiO2 surface of the Au-TiO2 hybrid electrocatalyst. This activation was achieved through molecular capping of the Au-TiO2 surface by citrate, which leads to favorable hydrazine oxidation with a lower Tafel slope compared to that of the clean surface of the respective materials, that is, Au and TiO2.

Boron-doped diamond semiconductor electrodes: Efficient photoelectrochemical CO2 reduction through surface modification.

Competitive hydrogen evolution and multiple proton-coupled electron transfer reactions limit photoelectrochemical CO2 reduction in aqueous electrolyte. Here, oxygen-terminated lightly boron-doped diamond (BDDL) thin films were synthesized as a semiconductor electron source to accelerate CO2 reduction. However, BDDL alone could not stabilize the intermediates of CO2 reduction, yielding a negligible amount of reduction products. Silver nanoparticles were then deposited on BDDL because of their selective electrochemical CO2 reduction ability. Excellent selectivity (estimated CO:H2 mass ratio of 318:1) and recyclability (stable for five cycles of 3 h each) for photoelectrochemical CO2 reduction were obtained for the optimum silver nanoparticle-modified BDDL electrode at -1.1 V vs. RHE under 222-nm irradiation. The high efficiency and stability of this catalyst are ascribed to the in situ photoactivation of the BDDL surface during the photoelectrochemical reaction. The present work reveals the potential of BDDL as a high-energy electron source for use with co-catalysts in photochemical conversion.

Charge Separation in TiO2/BDD Heterojunction Thin Film for Enhanced Photoelectrochemical Performance.

Semiconductor photocatalysis driven by electron/hole has begun a new era in the field of solar energy conversion and storage. Here we report the fabrication and optimization of TiO2/BDD p-n heterojunction photoelectrode using p-type boron doped diamond (BDD) and n-type TiO2 which shows enhanced photoelectrochemical activity. A p-type BDD was first deposited on Si substrate by microwave plasma chemical vapor deposition (MPCVD) method and then n-type TiO2 was sputter coated on top of BDD grains for different durations. The microstructural studies reveal a uniform disposition of anatase TiO2 and its thickness can be tuned by varying the sputtering time. The formation of p-n heterojunction was confirmed through I-V measurement. A remarkable rectification property of 63773 at 5 V with very small leakage current indicates achieving a superior, uniform and precise p-n junction at TiO2 sputtering time of 90 min. This suitably formed p-n heterojunction electrode is found to show 1.6 fold higher photoelectrochemical activity than bare n-type TiO2 electrode at an applied potential of +1.5 V vs SHE. The enhanced photoelectrochemical performance of this TiO2/BDD electrode is ascribed to the injection of hole from p-type BDD to n-type TiO2, which increases carrier separation and thereby enhances the photoelectrochemical performance.

Green synthesis of anatase TiO(2) nanocrystals with diverse shapes and their exposed facets-dependent photoredox activity.

The exposed facets of a crystal are known to be one of the key factors to its physical, chemical and electronic properties. Herein, we demonstrate the role of amines on the controlled synthesis of TiO2 nanocrystals (NCs) with diverse shapes and different exposed facets. The chemical, physical and electronic properties of the as-synthesized TiO2 NCs were evaluated and their photoredox activity was tested. It was found that the intrinsic photoredox activity of TiO2 NCs can be enhanced by controlling the chemical environment of the surface, i.e.; through morphology evolution. In particular, the rod shape TiO2 NCs with ∼25% of {101} and ∼75% of {100}/{010} exposed facets show 3.7 and 3.1 times higher photocatalytic activity than that of commercial Degussa P25 TiO2 toward the degradation of methyl orange and methylene blue, respectively. The higher activity of the rod shape TiO2 NCs is ascribed to the facetsphilic nature of the photogenerated carriers within the NCs. The photocatalytic activity of TiO2 NCs are found to be in the order of {101}+{100}/{010} (nanorods) > {101}+{001}+{100}/{010} (nanocuboids and nanocapsules) > {101} (nanoellipsoids) > {001} (nanosheets) providing the direct evidence of exposed facets-depended photocatalytic activity.

Synergy of low-energy {101} and high-energy {001} TiO2 crystal facets for enhanced photocatalysis.

Controlled crystal growth determines the shape, size, and exposed facets of a crystal, which usually has different surface physicochemical properties. Herein we report the size and facet control synthesis of anatase TiO2 nanocrystals (NCs). The exposed facets are found to play a crucial role in the photocatalytic activity of TiO2 NCs. This is due to the known preferential flow of photogenerated carriers to the specific facets. Although, in recent years, the main focus has been on increasing the surface area of high-energy exposed facets such as {001} and {100} to improve the photocatalytic activity, here we demonstrate that the presence of both the high-energy {001} oxidative and low-energy {101} reductive facets in an optimum ratio is necessary to reduce the charge recombination and thereby enhance photocatalytic activity of TiO2 NCs.