3D Covalent Organic Frameworks with 16-Connectivity for Photocatalytic C(sp3)-C(sp2) Cross-Coupling.

The connectivity (valency) of building blocks for constructing 3D covalent organic frameworks (COFs) has long been limited to 4, 6, 8, and 12. Developing a higher connectivity remains a great challenge in the field of COF structural design. Herein, this work reports a hierarchical expansion strategy for making 16-connected building blocks to construct 3D COFs with sqc topology. The [16 + 2] construction achieved by condensation between a 16-connected carbazolyl dicyanobenzene-based building block (CzTPN) and linear diamino linkers (BD or Bpy) affords two 3D COFs (named CzBD COF and CzBpy COF). Furthermore, attributed to the well-organized donor-acceptor (D-A) heterojunction, the Ni chelated CzBpy COF (Ni@CzBpy COF) exhibits excellent performance for photoredox/Ni dual catalytic C(sp3)-C(sp2) cross-coupling of alkyltrifluoroborates with aryl halides, achieving a maximum 98% conversion and 94% yield for various substrates. This work developed the first case of high-connectivity COFs bearing 16-connected units, which is the highest connectivity reported until now, and achieved efficient photocatalysis applications, thus greatly enriching the possibilities of COFs.

In situ Construction of Single-Atom Electronic Bridge on COF to Enhance Photocatalytic H2 Production.

Photocatalytic hydrogen production is one of the most valuable technologies in the future energy system. Here, we designed a metal-covalent organic frameworks (MCOFs) with both small-sized metal clusters and nitrogen-rich ligands, named COF-Cu3TG. Based on our design, small-sized metal clusters were selected to increase the density of active sites and shorten the distance of electron transport to active sites. While another building block containing nitrogen-rich organic ligands acted as a node that could in situ anchor metal atoms during photocatalysis and form interlayer single-atom electron bridges (SAEB) to accelerate electron transport. Together, they promoted photocatalytic performance. This represented the further utilization of Ru atoms and was an additional application of the photosensitizer. N2-Ru-N2 electron bridge (Ru-SAEB) was created in situ between the layers, resulting in a considerable enhancement in the hydrogen production rate of the photocatalyst to 10.47 mmol g-1 h-1. Through theoretical calculation and EXAFS, the existence position and action mechanism of Ru-SAEB were reasonably inferred, further confirming the rationality of the Ru-SAEB configuration. A sufficiently proximity between the small-sized Cu3 cluster and the Ru-SAEB was found to expedite electron transfer. This work demonstrated the synergistic impact of small molecular clusters with Ru-SAEB for efficient photocatalytic hydrogen production.

Insight into the Mechanism of CO2 Chemical Fixation into Epoxides by Windmill-Shaped Polyoxovanadate and n-Bu4NX (X = Br, I).

Carbon dioxide (CO2) coupled with epoxide to generate cyclic carbonate stands out in carbon neutrality due to its 100% atom utilization. In this work, the mechanism of CO2 cycloaddition with propylene oxide (PO) cocatalyzed by windmill-shaped polyoxovanadate, [(C2N2H8)4(CH3O)4VIV4VV4O16]·4CH3OH (V8-1), and n-Bu4NX (X = Br, I) was thoroughly investigated using density functional theory (DFT) calculations. The ring-opening, CO2-insertion, and ring-closing steps of the process were extensively studied. Our work emphasizes the synergistic effect between V8-1 and n-Bu4NX (X = Br, I). Through the analysis of an independent gradient model based on Hirshfeld partition (IGMH), it was found that the attack of n-Bu4NX (X = Br, I) on Cß of PO triggers a distinct attractive interaction between the active fragment and the surrounding framework, serving as the primary driving force for the ring opening of PO. Furthermore, the effect of different cocatalysts was explored, with n-Bu4NI being more favorable than n-Bu4NBr. Moreover, the role of V8-1 in the CO2 cycloaddition reaction was clarified as not only acting as Lewis acid active sites but also serving as "electron sponges". This work is expected to advance the development of novel catalysts for organic carbonate formation.

Photochromic radical states in 3D covalent organic frameworks with zyg topology for enhanced photocatalysis.

Covalent-organic frameworks (COFs) with photoinduced donor-acceptor (D-A) radical pairs show enhanced photocatalytic activity in principle. However, achieving long-lived charge separation in COFs proves challenging due to the rapid charge recombination. Here, we develop a novel strategy by combining [6 + 4] nodes to construct zyg-type 3D COFs, first reported in COF chemistry. This structure type exhibits a fused Olympic-rings-like shape, which provides a platform for stabilizing the photoinduced D-A radical pairs. The zyg-type COFs containing catalytically active moieties such as triphenylamine and phenothiazine (PTZ) show superior photocatalytic production rates of hydrogen peroxide (H2O2). Significantly, the photochromic radical states of these COFs show up to 400% enhancement in photocatalytic activity compared to the parent states, achieving a remarkable H2O2 synthesis rate of 3324 µmol g-1 h-1, which makes the PTZ-COF one of the best crystalline porous photocatalysts in H2O2 production. This work will shed light on the synthesis of efficient 3D COF photocatalysts built on topologies that can facilitate photogenerating D-A radical pairs for enhanced photocatalysis.

Bridging the Homogeneous and Heterogeneous Catalysis by Supramolecular Metal-Organic Cages with Varied Packing Modes.

Integrating the advantages of homogeneous and heterogeneous catalysis has proved to be an optimal strategy for developing catalytic systems with high efficiency, selectivity, and recoverability. Supramolecular metal-organic cages (MOCs), assembled by the coordination of metal ions with organic linkers into discrete molecules, have performed solvent processability due to their tunable packing modes, endowing them with the potential to act as homogeneous or heterogeneous catalysts in different solvent systems. Here, the design and synthesis of a series of stable {Cu3} cluster-based tetrahedral MOCs with varied packing structures are reported. These MOCs, as homogeneous catalysts, not only show high catalytic activity and selectivity regardless of substrate size during the CO2 cycloaddition reaction, but also can be easily recovered from the reaction media through separating products and co-catalysts by one-step work-up. This is because that these MOCs have varied solubilities in different solvents due to the tunable packing of MOCs in the solid state. Moreover, the entire catalytic reaction system is very clean, and the purity of cyclic carbonates is as high as 97% without further purification. This work provides a unique strategy for developing novel supramolecular catalysts that can be used for homogeneous catalysis and recycled in a heterogeneous manner.

Photocatalytic aerobic oxidation of C(sp3)-H bonds.

In modern industries, the aerobic oxidation of C(sp3)-H bonds to achieve the value-added conversion of hydrocarbons requires high temperatures and pressures, which significantly increases energy consumption and capital investment. The development of a light-driven strategy, even under natural sunlight and ambient air, is therefore of great significance. Here we develop a series of hetero-motif molecular junction photocatalysts containing two bifunctional motifs. With these materials, the reduction of O2 and oxidation of C(sp3)-H bonds can be effectively accomplished, thus realizing efficient aerobic oxidation of C(sp3)-H bonds in e.g., toluene and ethylbenzene. Especially for ethylbenzene oxidation reactions, excellent catalytic capacity (861 mmol g cat-1) is observed. In addition to the direct oxidation of C(sp3)-H bonds, CeBTTD-A can also be applied to other types of aerobic oxidation reactions highlighting their potential for industrial applications.

Best evidence summary for prevention and management of enteral feeding intolerance in critically ill patients.

AIM: To evaluate and summarize the evidence for prevention and management of enteral feeding intolerance in critically ill patients and provide reference for clinical practice. DESIGN: This study was an evidence summary followed by the evidence summary reporting standard of Fudan University Center for Evidence-based Nursing. METHODS: Current literatures were systematically searched for the best evidence for prevention and management of enteral feeding intolerance in critically ill patients. Literature types included clinical guidelines, best practice information sheets, expert consensuses, systematic reviews, evidence summaries and cohort studies. DATA SOURCES: UpToDate, BMJ Best Practice, Joanna Briggs Institute, Guidelines International Network, National Institute for Health and Care Excellence, Registered Nurses Association of Ontario, Scottish Intercollegiate Guidelines Network, the Cochrane Library, Embase, PubMed, Sinomed, Web of Science, Yi Maitong Guidelines Network, DynaMed, MEDLINE, CNKI, WanFang database, Chinese Medical Journal Full-text Database, European Society for Clinical Nutrition and Metabolism website, the American Society for Parenteral and Enteral Nutrition website were searched from January 2012 to April 2023. RESULTS: We finally identified 18 articles that had high-quality results. We summarized the 24 pieces of best evidence from these articles, covering five aspects: screening and assessment of the risk of enteral nutritional tolerance; formulation of enteral nutrition preparations; enteral nutritional feeding implementation; feeding intolerance symptom prevention and management; and multidisciplinary management. Of these pieces of evidence, 19 were 'strong' and 5 were 'weak', 7 pieces of evidence were recommended in level one and 4 pieces of evidence were recommended in level two. CONCLUSION: The following 24 pieces of evidence for prevention and management of enteral feeding intolerance in critically ill patients were finally recommended. However, as these evidences came from different countries, relevant factors such as the clinical environment should be evaluated before application. Future studies should focus on more specific symptoms of feeding intolerance and more targeted prevention design applications. IMPLICATIONS FOR THE PROFESSION AND PATIENT CARE: The clinical medical staffs are recommended to take evidence-based recommendations for the implementation of standardized enteral nutrition to improve patient outcomes and decrease gastrointestinal intolerance in critically ill patients. IMPACT: The management of enteral nutrition feeding intolerance has always been a challenge and difficulty in critically ill patients. This study summarizes 24 pieces of the best evidence for prevention and management of enteral nutrition feeding intolerance in critically ill patients. Following and implementing these 24 pieces of evidence is beneficial to the prevention and management of feeding intolerance in clinical practice. The 24 pieces of evidence include five aspects, including screening and assessment of the risk of enteral nutritional tolerance, formulation of enteral nutrition preparations, enteral nutritional feeding implementation, feeding intolerance symptom prevention and management and multidisciplinary management. These five aspects constitute a good implementation process. Screening and assessment of enteral nutritional tolerance throughout intervention are important guarantees for developing a feasible nutrition program in critically ill patients. This study will be benefit to global medical workers in the nutritional management of critically ill patients. REPORTING METHOD: This evidence summary followed the evidence summary reporting specifications of Fudan University Center for Evidence-based Nursing, which were based on the methodological process for the summary of the evidence produced by the Joanna Briggs Institute (JBI). The reporting specifications include problem establishment, literature retrieval, literature screening, literature evaluation, the summary and grading of evidence and the formation of practical suggestions. This study was based on the evidence summary reporting specifications of the Fudan University Center for the Evidence-based Nursing, the register name is 'Best evidence summary for prevention and management of enteral feeding intolerance in critically ill patients', the registration number is 'ES20231823'.

Brain Targeted Strategies of Oligonucleotide Drug for Aging-associated Diseases Therapy / 生物化学与生物物理进展

Oligonucleotide drugs have experienced accelerated development in the past 10 years, and some of them have been used in clinical treatment. Because of its convenient design, flexible sequence, and high specificity, it is expected to solve the “undruggable” challenge of many targets which are difficult in drug development. Moreover, its clinical transformation period and cost are relatively low, which makes oligonucleotide drug become the frontier of emerging biotechnology drug discovery. Brain diseases include a series of incurable diseases, such as neurodegenerative diseases, glioma, and motor neuron diseases. Many of them are age-related and regarded as aging-associated brain diseases. Due to the complex etiology, many targets are difficult to be drugged. At the same time, the existence of the barrier system “blood-brain barrier” in the brain makes most drugs unable to achieve effective accumulation at brain lesions, and many small molecule drugs have failed in clinical transformation. The specificity and sequence flexibility of oligonucleotide acid drugs provide new possibilities for drug development, but they also face the challenge of brain delivery. Although a variety of oligonucleotide drugs have been used in the medical market, brain-targeted oligonucleotide drugs are still extremely rare. This article reviewed recent advances and discussed key topics and clinical transformation challenges in this field, such as clinical approval cases, bottlenecks of brain-targeted delivery and current strategies, as well as potential targets for aging-related brain diseases.

Green synthesis of bifunctional phthalocyanine-porphyrin cofs in water for efficient electrocatalytic CO2 reduction coupled with methanol oxidation.

Electrocatalytic CO2 reduction (ECR) coupled with organic oxidation is a promising strategy to produce high value-added chemicals and improve energy efficiency. However, achieving the efficient redox coupling reaction is still challenging due to the lack of suitable electrocatalysts. Herein, we designed two bifunctional polyimides-linked covalent organic frameworks (PI-COFs) through assembling phthalocyanine (Pc) and porphyrin (Por) by non-toxic hydrothermal methods in pure water to realize the above catalytic reactions. Due to the high conductivity and well-defined active sites with different chemical environments, NiPc-NiPor COF performs efficient ECR coupled with methanol oxidation reaction (MOR) (Faradaic efficiency of CO (FECO) = 98.12%, partial current densities of CO (jCO) = 6.14 mA cm-2 for ECR, FEHCOOH = 93.75%, jHCOOH = 5.81 mA cm-2 for MOR at low cell voltage (2.1 V) and remarkable long-term stability). Furthermore, experimental evidences and density functional theory (DFT) calculations demonstrate that the ECR process mainly conducts on NiPc unit with the assistance of NiPor, meanwhile, the MOR prefers NiPor conjugating with NiPc. The two units of NiPc-NiPor COF collaboratively promote the coupled oxidation-reduction reaction. For the first time, this work achieves the rational design of bifunctional COFs for coupled heterogeneous catalysis, which opens a new area for crystalline material catalysts.

Cu-MOFs with Rich Open Metal and F Sites for Separation of C2H2 from CO2 and CH4.

Herein, we used the 4-fluoro-[1,1'-biphenyl]-3,4',5-tricarboxylic acid (H3fbptc) ligand to design and construct a new metal-organic framework (MOF), [Cu3(fbptc)2(H2O)3]·3NMP (1), which possesses rich accessible metal sites and F functional groups in the porous walls and shows high uptake for C2H2 (119.3 cm3 g-1) and significant adsorption selectivity for C2H2 over CH4 (14.4) and CO2 (3.6) at 298 K and 100 kPa. In particular, for the gas mixtures of C2H2-CH4 and C2H2-CO2, the MOF reveals large breakthrough time ratios (C2H2/CH4 = 13, C2H2/CO2 = 5.9), which are particularly prominent in dynamic breakthrough experiments, also confirming the excellent potential for the practical separation of C2H2 from two-component mixtures (C2H2-CH4 and C2H2-CO2) and even three-component mixtures (C2H2-CO2-CH4).

Calix[4]arene-Functionalized Titanium-Oxo Compounds for Perceiving Differences in Catalytic Reactivity Between Mono- and Multimetallic Sites.

While the difference in catalytic reactivity between mono- and multimetallic sites is often attributed to more than just the number of active sites, still few catalyst model systems have been developed to explore more underlying causal factors. In this work, we have elaborately designed and constructed three stable calix[4]arene (C4A)-functionalized titanium-oxo compounds, Ti-C4A, Ti4-C4A, and Ti16-C4A, with well-defined crystal structures, increasing nuclearity, and tunable light absorption capacity and energy levels. Among them, Ti-C4A and Ti16-C4A can be taken as model catalysts to compare the differences in reactivity between mono- and multimetallic sites. Taking CO2 photoreduction as the basic catalytic reaction, both compounds can achieve CO2-to-HCOO- conversion with high selectivity (close to 100%). Moreover, the catalytic activity of multimetallic Ti16-C4A is up to 2265.5 µmol g-1 h-1, which is at least 12 times higher than that of monometallic Ti-C4A (180.0 µmol g-1 h-1), and is the best-performing crystalline cluster-based photocatalyst known to date. Catalytic characterization combined with density functional theory calculations shows that in addition to the advantage of having more metal active sites (for adsorption and activation of more CO2 molecules), Ti16-C4A can effectively reduce the activation energy required for the CO2 reduction reaction by completing the multiple electron-proton transfer process rapidly with synergistic metal-ligand catalysis, thus exhibiting superior catalytic performance to that of monometallic Ti-C4A. This work provides a crystalline catalyst model system to explore the potential factors underlying the difference in catalytic reactivity between mono- and multimetallic sites.

Molecular oxidation-reduction junctions for artificial photosynthetic overall reaction.

Constructing redox semiconductor heterojunction photocatalysts is the most effective and important means to complete the artificial photosynthetic overall reaction (i.e., coupling CO2 photoreduction and water photo-oxidation reactions). However, multiphase hybridization essence and inhomogeneous junction distribution in these catalysts extremely limit the diverse design and regulation of the modes of photogenerated charge separation and transfer pathways, which are crucial factors to improve photocatalytic performance. Here, we develop molecular oxidation-reduction (OR) junctions assembled with oxidative cluster (PMo12, for water oxidation) and reductive cluster (Ni5, for CO2 reduction) in a direct (d-OR), alternant (a-OR), or symmetric (s-OR) manner, respectively, for artificial photosynthesis. Significantly, the transfer direction and path of photogenerated charges between traditional junctions are obviously reformed and enriched in these well-defined crystalline catalysts with monophase periodic distribution and thus improve the separation efficiency of the electrons and holes. In particular, the charge migration in s-OR shows a periodically and continuously opposite mode. It can inhibit the photogenerated charge recombination more effectively and enhance the photocatalytic performance largely when compared with the traditional heterojunction models. Structural analysis and density functional theory calculations disclose that, through adjusting the spatial arrangement of oxidation and reduction clusters, the energy level and population of the orbitals of these OR junctions can be regulated synchronously to further optimize photocatalytic performance. The establishment of molecular OR junctions is a pioneering important discovery for extremely improving the utilization efficiency of photogenerated charges in the artificial photosynthesis overall reaction.

Theoretical study of NiI-NiIII cycle mediated by heterogeneous zinc in C-N cross-coupling reaction.

Photoredox/transition-metal dual catalysis could efficiently construct C-N bonds by a cross-coupling reaction. The limitations of low recovery, low utilization rate and high cost have hindered the application and development of low-cost and efficient transition metal catalytic cycles. The integration of heterogeneous metal and transition metal catalysis is an appealing alternative to realize the oxidation state modulation of active species. With the support of density functional theory (DFT) calculation, we have explored the mechanistic details of Ni-catalyzed C-N cross-coupling of aryl bromide and cyclic amine assisted by zinc powder. Zinc successfully regulates the oxidation state of NiII → NiI, thus achieving the NiI-NiIII-NiI catalytic cycle in the absence of light. In comparison, when the Ni(0) complex is employed as the initial catalyst, organic zinc reagents can still be involved in the transmetalation process to accelerate the cross-coupling reaction. We hope that such computational studies can provide theoretical reference for the design and development of low-cost and efficient catalytic systems for C-N cross-couplings.

A new metal-organic framework based on rare [Zn4F4] cores for efficient separation of C2H2.

Assembly via 1,4-benzenedicarboxylate linkers and Zn2+ ions afforded an MOF containing rare [Zn4F4] cubane core, showing excellent separation for C2H2-CO2 and C2H2-CH4 mixtures. Dynamic breakthrough experiments and grand canonical Monte Carlo calculations were carried out to confirm the feasibility of the MOF for the separation application of C2H2.

Low Band Gap Benzoxazole-Linked Covalent Organic Frameworks for Photo-Enhanced Targeted Uranium Recovery.

The inherent features of covalent organic frameworks (COFs) make them highly attractive for uranium recovery applications. A key aspect yet to be explored is how to improve the selectivity and efficiency of COFs for recovering uranium from seawater. To achieve this goal, a series of robust and hydrophilic benzoxazole-based COFs is developed (denoted as Tp-DBD, Bd-DBD, and Hb-DBD) as efficient adsorbents for photo-enhanced targeted uranium recovery. Benefiting from the hydroxyl groups and the formation of benzoxazole rings, the hydrophilic Tp-DBD shows outstanding stability and chemical reduction properties. Meanwhile, the synergistic effect of the hydroxyl groups and the benzoxazole rings in the π-conjugated frameworks significantly decrease the optical band gap, and improve the affinity and capacity to uranium recovery. In seawater, the adsorption capacity of uranium is 19.2× that of vanadium, a main interfering metal in uranium extraction.

Superiority of Iridium Photocatalyst and Role of Quinuclidine in Selective α-C(sp3)-H Alkylation: Theoretical Insights.

Recent experimental work reported that visible-light photoredox catalysis coupled with primary sulfonamides and electron-deficient alkenes could efficiently construct C-C bonds at the α-position of primary amine derivatives under mild conditions. Here, a systematic study was conducted to explore the non-negligible excited-state single-electron-transfer (SET) processes and the catalytic cycle. Hydrogen atom transfer (HAT) catalysis containing different site-selective functionalization, involved as a critical process during the reaction, was computationally characterized. The superiorities of iridium-based photoredox catalysts in terms of photoabsorption properties, phosphorescence rates, and electron-transfer rates for SET processes were focused on. In addition, the function of quinuclidine in the entire photocatalytic reaction was also probed. These intrinsic properties and detailed insights into the mechanism are supposed to be helpful to the understanding of the C-C bond functionalization reaction and the future application of the iridium-based photoredox catalyst.

Regenerable Covalent Organic Frameworks for Photo-enhanced Uranium Adsorption from Seawater.

Uranium is a key resource for the development of the nuclear industry, and extracting uranium from the natural seawater is one of the most promising ways to address the shortage of uranium resources. Herein, a semiconducting covalent organic framework (named NDA-TN-AO) with excellent photocatalytic and photoelectric activities was synthesized. The excellent photocatalytic effect endowed NDA-TN-AO with a high anti-biofouling activity by generating biotoxic reactive oxygen species and promoting photoelectrons to reduce the adsorbed UVI to insoluble UIV , thereby increasing the uranium extraction capacity. Owing to the photoinduced effect, the adsorption capacity of NDA-TN-AO to uranium in seawater reaches 6.07 mg g-1 , which is 1.33 times of that in dark. The NDA-TN-AO with enhanced adsorption capacity is a promising material for extracting uranium from the natural seawater.

Different Protonic Species Affecting Proton Conductivity in Hollow Spherelike Polyoxometalates.

Polyoxometalates (POMs), which possess strong acidity and chemical stability, are promising solid proton conductors and potential candidates for proton exchange membrane fuel cell applications. To investigate how factors such as proton concentration and carrier affect the overall proton conduction, we have synthesized new compounds HImMo132 (Im, imidazole), HMeImMo132, ILMo132, and TBAMo132 with hollow structures and HImPMo12 with a solid spherelike structure. These crystal models were prepared by encapsulating POM with organic molecules with different proton contents. Among them, the single-crystal sample of the hollow structure HImMo132 containing more proton sources shows a high proton conductivity of 4.98 × 10-2 S cm-1, which was approximately 1 order of magnitude greater than that of the solid cluster HImPMo12 with the same proton sources and 3 orders of magnitude greater than that of the proton-free organic cation-encapsulated giant ball TBAMo132. This study provides a theoretical guidance toward designing and developing new-generation proton conductors and studying their performances at the molecular level.

Evidence for the Involvement of Auxin, Ethylene and ROS Signaling During Primary Root Inhibition of Arabidopsis by the Allelochemical Benzoic Acid.

Allelopathy is mediated by plant-derived secondary metabolites (allelochemicals) which are released by donor plants and affect the growth and development of receptor plants. The plant root is the first organ which senses soil allelochemicals this results in the production of a shorter primary root. However, the mechanisms underlying this process remain elusive. Here, we report that a model allelochemical benzoic acid (BA) inhibited primary root elongation of Arabidopsis seedlings by reducing the sizes of both the meristem and elongation zones, and that auxin signaling affected this process. An increase in auxin level in the root tips was associated with increased expression of auxin biosynthesis genes and auxin polar transporter AUX1 and PIN2 genes under BA stress. Mutant analyses demonstrated that AUX1 and PIN2 rather than PIN1 were required for the inhibition of primary root elongation during BA exposure. Furthermore, BA stimulated ethylene evolution, whereas blocking BA-induced ethylene signaling with an ethylene biosynthesis inhibitor (Co2+), an ethylene perception antagonist (1-methylcyclopropene) or ethylene signaling mutant lines etr1-3 and ein3eil1 compromised BA-mediated inhibition of root elongation and up-regulation of auxin biosynthesis-related genes together with AUX1 and PIN2, indicating that ethylene signal was involved in auxin-mediated inhibition of primary root elongation during BA stress. Further analysis revealed that the BA-induced reactive oxygen species (ROS) burst contributed to BA-mediated root growth inhibition without affecting auxin and ethylene signals. Taken together, our results reveal that the allelochemical BA inhibits root elongation by increasing auxin accumulation via stimulation of auxin biosynthesis and AUX1/PIN2-mediated auxin transport via stimulation of ethylene production and an auxin/ethylene-independent ROS burst.

Orthogonal reactivity of Ni(i)/Pd(0) dual catalysts for Ullmann C-C cross-coupling: theoretical insight.

Dual catalysis has become a desirable alternative because of the synergetic effect of two distinct catalysts, but little is known about the mechanism of dual catalysis and its effect on the high reactivity and selectivity. Here, a novel Ullmann C-C cross-coupling of bromobenzene and 4-methoxyphenyltriflate via nickel/palladium dual catalysis has been investigated using density functional theory. The orthogonal reactivity of NiI/Pd0 combination is the precondition and foundation of achieving such a Ullmann cross-coupling reaction. In the present dual catalysis, the NiI complex acts as the primary catalyst, while the Pd0 catalyst plays a decisive role in the cross-selectivity.