RESUMEN
Next-generation sequencing (NGS) is becoming more relevant for medical diagnostics, especially for using cell-free DNA to monitor response to therapy in cancer management, as high sensitivity of NGS enables detection of rare events. Sequencing Library preparation is a time-consuming and complex process, and large-scale liquid handlers are often used for automation. However, for smaller labs and low-to-medium throughput samples, these liquid handlers are expensive and need experts for handling. This work presents a proof-of-concept for library preparation on a commercially available and open lab-on-a-chip platform, which provides an alternative automation for low-to-medium throughput requirements. It covers common library preparation steps optimized to a microfluidic environment that include customizable PCR for target enrichment, end-repair, adapter ligation, nucleic acid purification via magnetic beads, and an integrated quantification step. The functionality of the cartridge is demonstrated with reference cfDNA containing different allelic frequencies of seven known mutations. Processing the samples in the cartridge reveals highly comparable results to manual processing (Pearson r = 0.94) based on amplicon sequencing. Summarized, the proposed automated lab-on-a-chip workflow for customizable library preparation could further pave the way for NGS to evolve from a technology used for research purposes to one that is applied in routine cancer management.
Asunto(s)
Biblioteca de Genes , Secuenciación de Nucleótidos de Alto Rendimiento , Secuenciación de Nucleótidos de Alto Rendimiento/métodos , Humanos , Dispositivos Laboratorio en un Chip , Automatización , Microfluídica/métodos , Microfluídica/instrumentación , Ácidos Nucleicos Libres de Células/genética , Ácidos Nucleicos Libres de Células/aislamiento & purificación , Ácidos Nucleicos Libres de Células/análisis , Reacción en Cadena de la Polimerasa/métodos , Análisis de Secuencia de ADN/métodosRESUMEN
Candida albicans, the primary etiology of human mycoses, is well-adapted to catabolize proline to obtain energy to initiate morphological switching (yeast to hyphal) and for growth. We report that put1-/- and put2-/- strains, carrying defective Proline UTilization genes, display remarkable proline sensitivity with put2-/- mutants being hypersensitive due to the accumulation of the toxic intermediate pyrroline-5-carboxylate (P5C), which inhibits mitochondrial respiration. The put1-/- and put2-/- mutations attenuate virulence in Drosophila and murine candidemia models and decrease survival in human neutrophils and whole blood. Using intravital 2-photon microscopy and label-free non-linear imaging, we visualized the initial stages of C. albicans cells infecting a kidney in real-time, directly deep in the tissue of a living mouse, and observed morphological switching of wildtype but not of put2-/- cells. Multiple members of the Candida species complex, including C. auris, are capable of using proline as a sole energy source. Our results indicate that a tailored proline metabolic network tuned to the mammalian host environment is a key feature of opportunistic fungal pathogens.
Asunto(s)
Candida albicans , Saccharomyces cerevisiae , Animales , Ratones , Humanos , Virulencia , Saccharomyces cerevisiae/genética , Prolina/metabolismo , Candida , MamíferosRESUMEN
Despite tremendous global efforts since the beginning of the COVID-19 pandemic, still only a limited number of prophylactic and therapeutic options are available. Although vaccination is the most effective measure in preventing morbidity and mortality, there is a need for safe and effective post-infection treatment medication. In this study, we explored a pipeline of 21 potential candidates, examined in the Calu-3 cell line for their antiviral efficacy, for drug repurposing. Ralimetinib and nafamostat, clinically used drugs, have emerged as attractive candidates. Due to the inherent limitations of the selected drugs, we formulated targeted liposomes suitable for both systemic and intranasal administration. Non-targeted and targeted nafamostat liposomes (LipNaf) decorated with an Apolipoprotein B peptide (ApoB-P) as a specific lung-targeting ligand were successfully developed. The developed liposomal formulations of nafamostat were found to possess favorable physicochemical properties including nano size (119-147 nm), long-term stability of the normally rapidly degrading compound in aqueous solution, negligible leakage from the liposomes upon storage, and a neutral surface charge with low polydispersity index (PDI). Both nafamostat and ralimetinib liposomes showed good cellular uptake and lack of cytotoxicity, and non-targeted LipNaf demonstrated enhanced accumulation in the lungs following intranasal (IN) administration in non-infected mice. LipNaf retained its anti-SARS-CoV 2 activity in Calu 3 cells with only a modest decrease, exhibiting complete inhibition at concentrations >100 nM. IN, but not intraperitoneal (IP) treatment with targeted LipNaf resulted in a trend to reduced viral load in the lungs of K18-hACE2 mice compared to targeted empty Lip. Nevertheless, upon removal of outlier data, a statistically significant 1.9-fold reduction in viral load was achieved. This observation further highlights the importance of a targeted delivery into the respiratory tract. In summary, we were able to demonstrate a proof-of-concept of drug repurposing by liposomal formulations with anti-SARS-CoV-2 activity. The biodistribution and bioactivity studies with LipNaf suggest an IN or inhalation route of administration for optimal therapeutic efficacy.
Asunto(s)
COVID-19 , Humanos , Ratones , Animales , Liposomas , Reposicionamiento de Medicamentos , Pandemias , Distribución Tisular , Pulmón , SARS-CoV-2RESUMEN
Cellobiose lipids (CL) are glycolipids synthesized by Ustilaginaceae species with potential application as detergents or in cosmetics. This study identified process optimisation potential for CL fermentation based on process modelling and techno-economic analysis. Using a stoichiometric equation based on laboratory data, we calculated the maximum possible CL yield YP/S of 0.45 gCL·gglucose -1 at the biomass yield of 0.10 gBiomass·gglucose -1 with an Ustilago maydis strain. Due to substrate inhibition that may occur at high glucose concentrations, a fed-batch process to increase biomass and CL concentrations was considered in our model. Simulation of different process scenarios showed that the choice of aeration units with high oxygen transfer rates and adaptation of power input to oxygen uptake can significantly decrease electricity consumption. We further assessed scenarios with different fermentation media and CL purification methods, suggesting additional process optimisation potential. Here the omission of vitamins from the fermentation medium proved to be a possible mean to enhance process economy, without compromising CL productivity.
RESUMEN
Mannosylerythritol lipids are glycolipid biosurfactants with many interesting properties. Despite the general interest in those molecules and the need for a robust process, studies on their production in bioreactors are still scarce. In the current study, the fermentative production of MEL in a bioreactor with Moesziomyces aphidis was performed using a defined mineral salt medium. Several kinetic process parameters like substrate consumption rates and product formation rates were evaluated and subsequently enhanced by increasing the biomass concentration through an exponential fed-batch strategy. The fed-batch approaches resulted in two to three fold increased dry biomass concentrations of 10.9-15.5 g/L at the end of the growth phase, compared with 4.2 g/L in the batch process. Consequently, MEL formation rates were increased from 0.1 g/Lh up to around 0.4 g/Lh during the MEL production phase. Thus, a maximum concentration of up to 50.5 g/L MEL was obtained when oil was added in excess, but high concentrations of residual fatty acids were also present in the broth. By adjusting the oil feeding to biomass-specific hydrolysis and MEL production rates, a slightly lower MEL concentration of 34.3 g/L was obtained after 170 h, but at the same time a very pure crude lipid extract with more than 90% MEL and a much lower concentration of remaining fatty acids. With rapeseed oil as substrate, the ideal oil-to-biomass ratio for full substrate conversion was found to be around 10 goil/gbiomass. In addition, off-gas analysis and pH trends could be used to assess biomass growth and MEL production. Finally, kinetic models were developed and compared to the experimental data, allowing for a detailed prediction of the process behavior in future experiments.
RESUMEN
Herpes simplex virus-1 (HSV-1) is highly contagious, and there is a need for a therapeutic means to eradicate it. We have identified an siRNA (siHSV) that knocks down gene expression of the infected cell protein 0 (ICP0), which is important in the regulation of HSV infection. The selected siHSV was encapsulated in liposomes to overcome its poor stability, increase cell permeability, and prolonging siRNA circulation time. Several siRNAs against ICP0 have been designed and identified. We examined the role of various parameters, including formulation technique, lipids composition, and ratio. An optimal liposomal siHSV formulation (LipDOPE-siHSV) was characterized with desirable physiochemical properties, in terms of nano-size, low polydispersity index (PDI), neutral surface charge, high siHSV loading, spherical shape, high stability in physiologic conditions in vitro, and long-term shelf-life stability (>1 year, 4 °C). The liposomes exhibited profound internalization by human keratinocytes, no cytotoxicity in cell cultures, no detrimental effect on mice liver enzymes, and a gradual endo-lysosomal escape. Mice biodistribution studies in intact mice revealed accumulation, mainly in visceral organs but also in the trigeminal ganglion. The therapeutic potential of siHSV liposomes was demonstrated by significant antiviral activity both in the plaque reduction assay and in the 3D epidermis model, and the mechanism of action was validated by the reduction of ICP0 expression levels.
RESUMEN
Infectious diseases are still a major problem worldwide. This includes microbial infections, with a constant increase in resistance to the current anti-infectives employed. Toll-like receptors (TLRs) perform a fundamental role in pathogen recognition and activation of the innate immune response. Promising new approaches to combat infections and inflammatory diseases involve modulation of the host immune system via TLR4. TLR4 and its co-receptors MD2 and CD14 are required for immune response to fungal and bacterial infection by recognition of microbial cell wall components, making it a prime target for drug development. To evaluate the efficacy of anti-infective compounds early on, we have developed a series of human-based immune responsive infection models, including immune responsive 3D-skin infection models for modeling fungal infections. By using computational methods: pharmacophore modeling and molecular docking, we identified a set of 46 potential modulators of TLR4, which were screened in several tests systems of increasing complexity, including immune responsive 3D-skin infection models. We could show a strong suppression of cytokine and chemokine response induced by lipopolysacharide (LPS) and Candida albicans for individual compounds. The development of human-based immune responsive assays provides a more accurate and reliable basis for development of new anti-inflammatory or immune-modulating drugs.
RESUMEN
Techniques for continuously monitoring the formation of subgingival biofilm, in relation to the determination of species and their accumulation over time in gingivitis and periodontitis, are limited. In recent years, advancements in the field of optical spectroscopic techniques have provided an alternative for analyzing three-dimensional microbiological structures, replacing the traditional destructive or biofilm staining techniques. In this work, we have demonstrated that the use of confocal Raman spectroscopy coupled with multivariate analysis provides an approach to spatially differentiate bacteria in an in vitro model simulating a subgingival dual-species biofilm. The present study establishes a workflow to evaluate and differentiate bacterial species in a dual-species in vitro biofilm model, using confocal Raman microscopy (CRM). Biofilm models of Actinomyces denticolens and Streptococcus oralis were cultured using the "Zürich in vitro model" and were analyzed using CRM. Cluster analysis was used to spatially differentiate and map the biofilm model over a specified area. To confirm the clustering of species in the cultured biofilm, confocal laser scanning microscopy (CLSM) was coupled with fluorescent in vitro hybridization (FISH). Additionally, dense bacteria interface area (DBIA) samples, as an imitation of the clusters in a biofilm, were used to test the developed multivariate differentiation model. This confirmed model was successfully used to differentiate species in a dual-species biofilm and is comparable to morphology. The results show that the developed workflow was able to identify main clusters of bacteria based on spectral "fingerprint region" information from CRM. Using this workflow, we have demonstrated that CRM can spatially analyze two-species in vitro biofilms, therefore providing an alternative technique to map oral multi-species biofilm models.
RESUMEN
Mannosylerythritol lipids (MELs) are glycolipid biosurfactants produced by fungi of the Ustilaginaceae family in the presence of hydrophobic carbon sources like plant oils. In the present study, we investigated the structural composition of MELs produced from castor oil using seven different microorganisms and compared them to MEL structures resulting from other plant oils. Castor oil is an industrially relevant plant oil that presents as an alternative to currently employed edible plant oils like rapeseed or soybean oil. The main fatty acid in castor oil is the mono-hydroxylated ricinoleic acid, providing the possibility to produce novel MEL structures with interesting features. Analysis of the produced MELs from castor oil by different chromatographic and mass spectrometry techniques revealed that all seven microorganisms were generally able to integrate hydroxylated fatty acids into the MEL molecule, although at varying degrees. These novel MELs containing a hydroxy fatty acid (4-O-[2'-O-alka(e)noyl-3'-O-hydroxyalka(e)noyl-4'/6'-O-acetyl-ß-D-mannopyranosyl]-erythritol) were more hydrophilic than conventional MEL and therefore showed a different elution behavior in chromatography. Large shares of novel hydroxy MELs (around 50% of total MELs) were found for the two MEL-B/C producing species Ustilago siamensis and Ustilago shanxiensis, but also for the MEL-A/B/C producer Moesziomyces aphidis (around 25%). In addition, tri-acylated hydroxylated MELs with a third long-chain fatty acid esterified to the free hydroxyl group of the hydroxy fatty acid were identified for some species. Overall, production of MEL from castor oil with the investigated organisms provided a complex mixture of various novel MEL structures that can be exploited for further research.
Asunto(s)
Aceite de Ricino , Tensoactivos , Basidiomycota , GlucolípidosRESUMEN
Fermentative lactic acid production is currently impeded by low pH tolerance of the production organisms, the successive substrate consumption of the strains and/or the requirement to apply purified substrate streams. We identified Lactobacillus brevis IGB 1.29 in compost, which is capable of producing lactic acid at low pH values from lignocellulose hydrolysates, simultaneously consuming glucose and xylose. In this study, we compared Lactobacillus brevis IGB 1.29 with the reference strains Lactobacillus brevis ATCC 367, Lactobacillus plantarum NCIMB 8826 and Lactococcus lactis JCM 7638 with regard to the consumption of C5- and C6-sugars. Simultaneous conversion of C5- and C6-monosaccharides was confirmed for L. brevis IGB 1.29 with consumption rates of 1.6 g/(L h) for glucose and 1.0 g/(L h) for xylose. Consumption rates were lower for L. brevis ATCC 367 with 0.6 g/(L h) for glucose and 0.2 g/(L h) for xylose. Further trials were carried out to determine the sensitivity towards common toxic degradation products in lignocellulose hydrolysates: acetate, hydroxymethylfurfural, furfural, formate, levulinic acid and phenolic compounds from hemicellulose fraction. L. lactis was the least tolerant strain towards the inhibitors, whereas L. brevis IGB 1.29 showed the highest tolerance. L. brevis IGB 1.29 exhibited only 10% growth reduction at concentrations of 26.0 g/L acetate, 1.2 g/L furfural, 5.0 g/L formate, 6.6 g/L hydroxymethylfurfural, 9.2 g/L levulinic acid or 2.2 g/L phenolic compounds. This study describes a new strain L. brevis IGB 1.29, that enables efficient lactic acid production with a lignocellulose-derived C5- and C6-sugar fraction.
Asunto(s)
Levilactobacillus brevis , Xilosa , Fermentación , Glucosa , LigninaRESUMEN
The study of oral disease progression, in relation to the accumulation of subgingival biofilm in gingivitis and periodontitis is limited, due to either the ability to monitor plaque in vitro. When compared, optical spectroscopic techniques offer advantages over traditional destructive or biofilm staining approaches, making it a suitable alternative for the analysis and continued development of three-dimensional structures. In this work, we have developed a confocal Raman spectroscopy analysis approach towards in vitro subgingival plaque models. The main objective of this study was to develop a method for differentiating multiple oral subgingival bacterial species in planktonic and biofilm conditions, using confocal Raman microscopy. Five common subgingival bacteria (Fusobacterium nucleatum, Streptococcus mutans, Veillonella dispar, Actinomyces naeslundii and Prevotella nigrescens) were used and differentiated using a 2-way orthogonal Partial Least Square with Discriminant Analysis (O2PLS-DA) for the collected spectral data. In addition to planktonic growth, mono-species biofilms cultured using the 'Zürich Model' were also analyzed. The developed method was successfully used to predict planktonic and mono-species biofilm species in a cross validation setup. The results show differences in the presence and absence of chemical bands within the Raman spectra. The O2PLS-DA model was able to successfully predict 100% of all tested planktonic samples and 90% of all mono-species biofilm samples. Using this approach we have shown that Confocal Raman microscopy can analyse and predict the identity of planktonic and mono-species biofilm species, thus enabling its potential as a technique to map oral multi-species biofilm models.
Asunto(s)
Bacterias/aislamiento & purificación , Gingivitis/microbiología , Microscopía Óptica no Lineal/métodos , Periodontitis/microbiología , Actinomyces , Técnicas Bacteriológicas/métodos , Biopelículas/crecimiento & desarrollo , Medios de Cultivo , Fusobacterium nucleatum , Encía/microbiología , Viabilidad Microbiana , Microbiota , Microscopía Confocal/métodos , Plancton , Prevotella intermedia , Streptococcus mutans , VeillonellaRESUMEN
Mannosylerythritol lipids (MEL) are microbial glycolipid biosurfactants with great potential for application in cosmetics and household detergents. In current biotechnological processes, they are produced by basidiomycetous fungi, the Ustilaginaceae, as a complex mixture of different chemical structures. It was the aim of this paper to study the influence of producer organisms and substrates on the resulting MEL structures with a novel high-resolution HPTLC-MALDI-TOF method. Given the seven different microbes and four plant oils, our analysis revealed that the product concentrations varied strongly between organisms, while they were similar for the different substrates. Coconut oil presented an exception, since only one organism was able to synthesize MEL from this substrate in considerable yields. Analysis by GC-FID further showed that the chain length pattern of hydrophobic fatty acid side-chains was very specific for individual organisms, while substrates had only a minor influence on the chain length. Our novel HPTLC-MALDI-TOF combination method finally demonstrated the presence of multiple MEL sub-variants with differing acetylation and fatty acid chain lengths. It also revealed the production of a more hydrophilic biosurfactant mannosylmannitol lipid (MML) as a side-product in certain fungi. Overall, it was concluded that the pattern of produced biosurfactant structures are mainly governed by producer organisms rather than substrates.
Asunto(s)
Cromatografía en Capa Delgada/métodos , Glucolípidos/química , Glucolípidos/metabolismo , Aceites de Plantas/metabolismo , Espectrometría de Masa por Láser de Matriz Asistida de Ionización Desorción/métodos , Ustilaginales/metabolismo , Ácidos Grasos/química , Ácidos Grasos/metabolismo , Interacciones Hidrofóbicas e Hidrofílicas , Aceites de Plantas/química , Tensoactivos/química , Tensoactivos/metabolismo , Ustilaginales/genéticaRESUMEN
Toll-like receptor 4 plays an important role in the regulation of the innate and adaptive immune response. The majority of TLR4 activators currently in clinical use are derivatives of its prototypic ligand LPS. The discovery of innovative TLR4 activators has the potential of providing new therapeutic immunomodulators and adjuvants. We used computational design methods to predict and optimize a total of 53 cyclic and linear peptides targeting myeloid differentiation 2 (MD2) and cluster of differentiation 14 (CD14), both coreceptors of human TLR4. Activity of the designed peptides was first assessed using NF-κB reporter cell lines expressing either TLR4/MD2 or TLR4/CD14 receptors, then binding to CD14 and MD2 confirmed and quantified using MicroScale Thermophoresis. Finally, we incubated select peptides in human whole blood and observed their ability to induce cytokine production, either alone or in synergy with LPS. Our data demonstrate the advantage of computational design for the discovery of new TLR4 peptide activators with little structural resemblance to known ligands and indicate an efficient strategy with which to identify TLR4 targeting peptides that could be used as easy-to-produce alternatives to LPS-derived molecules in a variety of settings.
Asunto(s)
Anticuerpos Biespecíficos/genética , Sitios de Unión de Anticuerpos/genética , Receptores de Lipopolisacáridos/inmunología , Antígeno 96 de los Linfocitos/inmunología , Receptor Toll-Like 4/agonistas , Anticuerpos Biespecíficos/metabolismo , Células Cultivadas , Biología Computacional , Humanos , Ligandos , Estructura Molecular , FN-kappa B/metabolismo , Unión Proteica , Conformación Proteica , Ingeniería de Proteínas , Transducción de SeñalRESUMEN
Members of the Cysteine-rich secretory protein, Antigen 5 and Pathogenesis-related 1 (CAP) protein superfamily are important virulence factors in fungi but remain poorly characterized on molecular level. Here, we investigate the cellular localization and molecular function of Rbe1p and Rbt4p, two CAP family members from the human pathogen Candida albicans. We unexpectedly found that Rbe1p localizes to budding sites of yeast cells in a disulfide bond-dependent manner. Furthermore, we show that Rbe1p and Rbt4p bind free cholesterol in vitro and export cholesteryl acetate in vivo. These findings suggest a previously undescribed role for Rbe1p in cell wall-associated processes and a possible connection between the virulence attributes of fungal CAP proteins and sterol binding.
Asunto(s)
Candida albicans/fisiología , Candidiasis/microbiología , Proteínas Fúngicas/metabolismo , Secuencia de Aminoácidos , Sitios de Unión , Transporte Biológico , Colesterol/química , Colesterol/metabolismo , Proteínas Fúngicas/química , Proteínas Fúngicas/genética , Humanos , Modelos Moleculares , Conformación Molecular , Unión Proteica , Dominios y Motivos de Interacción de Proteínas , Transporte de Proteínas , Esteroles/química , Esteroles/metabolismo , Relación Estructura-Actividad , VirulenciaRESUMEN
Protein production using processed cell lysates is a core technology in synthetic biology and these systems are excellent to produce difficult toxins or membrane proteins. However, the composition of the central lysate of cell-free systems is still a "black box". Escherichia coli lysates are most productive for cell-free expression, yielding several mgs of protein per ml of reaction. Their preparation implies proteome fractionation, resulting in strongly biased and yet unknown lysate compositions. Many metabolic pathways are expected to be truncated or completely removed. The lack of knowledge of basic cell-free lysate proteomes is a major bottleneck for directed lysate engineering approaches as well as for assay design using non-purified reaction mixtures. This study is starting to close this gap by providing a blueprint of the S30 lysate proteome derived from the commonly used E. coli strain A19. S30 lysates are frequently used for cell-free protein production and represent the basis of most commercial E. coli cell-free expression systems. A fraction of 821 proteins was identified as the core proteome in S30 lysates, representing approximately a quarter of the known E. coli proteome. Its classification into functional groups relevant for transcription/translation, folding, stability and metabolic processes will build the framework for tailored cell-free reactions. As an example, we show that SOS response induction during cultivation results in tuned S30 lysate with better folding capacity, and improved solubility and activity of synthesized proteins. The presented data and protocols can serve as a platform for the generation of customized cell-free systems and product analysis.
Asunto(s)
Proteínas de Escherichia coli/química , Proteínas de Escherichia coli/metabolismo , Escherichia coli/química , Proteoma/química , Proteoma/metabolismo , Cromatografía Liquida , Escherichia coli/metabolismo , Proteínas Fluorescentes Verdes/química , Espectrometría de Masas , Pliegue de Proteína , Solubilidad , Espectrometría de FluorescenciaRESUMEN
The human skin is commonly colonized by diverse fungal species. Some Candida species, especially C. albicans, do not only reside on the skin surface as commensals, but also cause infections by growing into the colonized tissue. However, defense mechanisms at the skin barrier level are very efficient, involving residential non-immune and immune cells as well as immune cells specifically recruited to the site of infection. Therefore, the skin is an effective barrier against fungal infection. While most studies about commensal and pathogenic interaction of Candida species with host epithelia focus on the interaction with mucosal surfaces such as the vaginal and gastrointestinal epithelia, less is known about the mechanisms underlying Candida interaction with the skin. In this review, we focus on the ecology and molecular pathogenesis of Candida species on the skin and give an overview of defense mechanisms against C. albicans in this context. We also discuss new research avenues in dermal infection, including the involvement of neurons, fibroblasts, and commensal bacteria in both mouse and human model systems.
RESUMEN
The fungal pathogen Candida albicans colonizes basically all human epithelial surfaces, including the skin. Under certain conditions, such as immunosuppression, invasion of the epithelia occurs. Not much is known about defense mechanisms against C. albicans in subepithelial layers such as the dermis. Using immune cell-supplemented 3D skin models we defined a new role for fibroblasts in the dermis and identified a minimal set of cell types for skin protection against C. albicans invasion. Dual RNA sequencing of individual host cell populations and C. albicans revealed that dermal invasion is directly impeded by dermal fibroblasts. They are able to integrate signals from the pathogen and CD4+ T cells and shift toward an antimicrobial phenotype with broad specificity that is dependent on Toll-like receptor 2 and interleukin 1ß. These results highlight a central function of dermal fibroblasts for skin protection, opening new possibilities for treatment of infectious diseases.
Asunto(s)
Candida albicans/inmunología , Candidiasis/inmunología , Dermis , Fibroblastos , Modelos Biológicos , Linfocitos T CD4-Positivos/inmunología , Línea Celular , Dermis/citología , Dermis/inmunología , Dermis/microbiología , Fibroblastos/citología , Fibroblastos/inmunología , Fibroblastos/microbiología , Humanos , Interleucina-1beta , Queratinocitos/citología , Queratinocitos/inmunología , Queratinocitos/microbiología , Masculino , Transducción de Señal/inmunología , Receptor Toll-Like 2RESUMEN
Pseudonocardia autotrophica strain DSM 43083 is a filamentous actinobacterium and was described to degrade or modify lignin. Here, we present its draft genome sequence, with a size of 5.8 Mb, to unravel the gene set coding for promising monooxygenases, dioxygenases, and DyP-type peroxidases associated with aromatic metabolism and lignin modification.
RESUMEN
OBJECTIVES: To explore Candida guilliermondii for the production of long-chain dicarboxylic acids (DCA), we performed metabolic pathway engineering aiming to prevent DCA consumption during ß-oxidation, but also to increase its production via the ω-oxidation pathway. RESULTS: We identified the major ß- and ω-oxidation pathway genes in C. guilliermondii and performed first steps in the strain improvement. A double pox disruption mutant was created that slowed growth with oleic acid but showed accelerated DCA degradation. Increase in DCA production was achieved by homologous overexpression of a plasmid borne cytochrome P450 monooxygenase gene. CONCLUSION: C. guilliermondii is a promising biocatalyst for DCA production but further insight into its fatty acid metabolism is necessary.
Asunto(s)
Biocatálisis , Candida/metabolismo , Ácidos Dicarboxílicos/metabolismo , Candida/genética , Cromatografía en Capa Delgada , Regulación Fúngica de la Expresión Génica , Genes Fúngicos , Mutación/genética , Oxidación-Reducción , FilogeniaRESUMEN
Formaldehyde dismutase (FDM) is a very interesting enzyme, due to the fact that it comprises an internal cofactor regeneration mechanism. The FDM, therefore, is able to catalyze redox reactions independent of exogenous cofactor addition, rendering the enzyme powerful for industrial applications. Currently, only one enzyme of this type has been characterized enzymatically. Furthermore, only one additional DNA-sequence with high homology to FDM has been published. In this work, we identified a new variant of a formaldehyde dismutase gene (fdm) in the Pseudomonas putida J3 strain. To isolate and characterize the enzyme, we developed a simplified method for its purification. This purification is based on a C-terminal 6xHis-tag, which enables functional expression of the enzyme in E. coli and a one-step purification method. In addition, we tested several expression systems for optimal yields and combined this with co-expression of the chaperonins GroESL. Using this simplified and rapid method, we are now able to produce sufficient material in reproducible quality and quantity for application tests with the enzyme. The newly identified enzyme will be applied in a redox cascade for biomethanol production from biogas and shows potential for further industrial biotransformation with integrated cofactor recycling.