Collaborative determination of trace element mass fractions and isotope ratios in AQUA-1 drinking water certified reference material.

The Isotrace CNRS workgroup in collaboration with National Research Council of Canada has characterized a number of trace element mass fractions and isotope ratios currently not certified in AQUA-1 natural drinking water reference material (NRC Canada). This survey further expands the use of this material as a tool for environmental quality control, method validation, and method development tool for the international community. Simultaneously, the SLRS-6 river water was analyzed as quality control and also in order to compare both water characteristics, which were sampled in the same area but having undergone different treatment. Mass fractions for B, Cs, Li, Ga, Ge, Hf, Nb, P, Rb, Rh, Re, S, Sc, Se, Si, Sn, Th, Ti, Tl, W, Y, Zr, REEs, and six isotopic ratios are proposed for Sr and Pb. Measurements were mostly performed using ICP-MS with various calibration approaches. The results are reported as consensus or indicative values depending on the number of available datasets, with their associated uncertainties.

Optimization of elemental selenium (Se(0)) determination in yeasts by anion-exchange HPLC-ICP-MS.

An analytical method was developed for the speciation of elemental selenium (Se(0)) in selenized yeasts by anion-exchange HPLC-ICP-MS after its chemical transformation into SeSO32- by reaction with sodium sulfite. The presence of Se(0) in the yeasts was further confirmed by single-particle ICP-MS. Indeed, Se nanoparticles, if present, are expected to be, at least partly, Se(0). X-ray photoelectron spectroscopy, a well-recognized technique for chemical element speciation in the solid state, was also used with this objective. Both methods were able to confirm the presence of Se(0) in the selenized yeasts but failed to provide reliable quantitative results. Analytical performances of the HPLC-ICP-MS method were then evaluated for Se(0) determination. Quantification limits of 1 mg/kg were reached. The recovery levels from an added quantity comprised between 93 and 101%. Within-run and between-run precisions were both below 8%. The procedure developed was finally applied to quantify Se(0) content in a series of seven yeast batches from different suppliers. Se(0) was found to be present in all the studied yeasts and represented on average 10-15% of the total Se.

Potential of lead elemental and isotopic signatures for authenticity and geographical origin of Bordeaux wines.

Lead concentrations and lead isotope ratios of 43 authentic Bordeaux wines from prestigious châteaux and 14 suspicious Bordeaux origin were determined to evaluate their potential for authenticity and geographical origin assessment. Results have shown that the total Pb concentrations in Bordeaux wines drastically decreased over the previous 50 years with a clear shift of isotopic signatures towards geogenic values corresponding to an overall trend of European environmental lead monitoring. The Pb isotopic ratios determined in both series of samples clearly demonstrated that suspicious Bordeaux wines displayed Pb isotopic signatures statistically distinctive from those obtained for authentic wines. This observation was confirmed by the three-isotope mixing lines obtained between the geogenic and the anthropogenic Pb isotopes data that characterize European and Asian sources. The use these specific three-isotope plots allows a non-ambiguous discrimination between authentic Pauillac AOC and the counterfeited ones.

Advanced nanomedicine characterization by DLS and AF4-UV-MALS: Application to a HIV nanovaccine.

Nanoformulations are complex systems where physicochemical properties determine their therapeutic efficacy and safety. In the case of nanovaccines, particle size and shape play a crucial role on the immune response generated. Furthermore, the antigen's integrity is also a key aspect to control when producing a nanovaccine. The determination of all those physicochemical properties is still an analytical challenge and the lack of well-established methods hinders the access of new therapeutics to the market. In this work, robust methods for the characterization of a novel HIV nanoparticle-based vaccine produced in good manufacturing practice (GMPs)-like environment were developed. With slightly polydisperse particles (< 0.2) close to 180 nm of size, batch-mode Dynamic Light Scattering (DLS) was validated to be used as a quality control technique in the pilot production plant. In addition, a high size resolution method using Asymmetrical Flow Field Flow Fractionation (AF4) demonstrated its ability to determine not only size and size distribution but also shape modification across the size and accurate quantification of the free active ingredient. Results showed a monomodal distribution of particles from 60 to 700 nm, most of them (> 90%) with size lower than 250 nm, consistent with more traditional techniques, and revealed a slight change in the structure of the particles induced by the presence of the antigen. Finally, a batch to batch variability lower than 20% was obtained by both DLS and AF4 methods indicating that preparation method was highly reproducible.

Strontium elemental and isotopic signatures of Bordeaux wines for authenticity and geographical origin assessment.

The 87Sr/86Sr ratio and Sr concentrations of 43 authentic Bordeaux wines from the world's most prestigious châteaux are presented in the context of their relation to the geographical origin of wine and authenticity. The results demonstrate relatively narrow spans of variabilities observed for 87Sr/86Sr ratio and Sr concentrations in authentic Bordeaux wines, which can be used with reasonable certainty as specific parameters for identifying regional wineries. For comparison, a set of imitated Bordeaux wines was studied for Sr isotopic and elemental compositions. A significant excess of both parameters in suspicious wines were found in reference to authentic values. Such natural and anthropogenically induced variations offer an enhanced discriminating potential of Sr. The unique Sr binary signature may detect imitated wines and trace genuine products from different regional wineries. The obtained results shown a promising perspective for wine authenticity control by means of Sr isotopic and elemental composition.

Cr(VI) and Cr(III) in milk, dairy and cereal products and dietary exposure assessment.

Milk, dairy and cereal products are the main contributors to total chromium (Cr) dietary exposure in France (up to 42% for children), but there have been no assessments regarding dietary exposure to Cr(VI) or Cr(III) to date. To assess dietary exposure, total chromium and Cr(VI) were determined in 68 different brands and origins of milk, dairy and cereal products. Cr(VI) was not detected in these samples despite the very high sensitivity of the method used. It was therefore assumed that total chromium is only present in the Cr(III) form. Total chromium levels were quantified in 58% of milk and dairy products and 76% of cereal products. The highest mean levels were found in breakfast cereals and cheese (269 and 25 µg Cr /kg fresh weight, respectively). The findings pointed out that the dietary exposure levels of Cr(III) and Cr(VI) were well below the health-based guidance values.

Study of the presence of micro- and nanoparticles in drinks and foods by multiple analytical techniques.

A variety of food and drink samples (n = 21) were analyzed to evaluate the presence of (nano-) particles in their composition. After assessment of the sample pre-treatment step, a fast screening analysis was performed for drinks by Dynamic Light Scattering showing particles from 10 to 300 nm that could correspond to organic or metallic NPs. Metallic NPs were identified in foods by Single-Particle mode Inductively Coupled Plasma Mass Spectrometry and Asymmetrical Flow Field-Flow Fractionation coupled to Multiangle Laser Light Scattering and Inductively-Coupled Plasma Mass Spectrometry. The determination of Ti, Si and Ag concentration in the initial food suspensions, after filtration and centrifugal ultrafiltration enabled to estimate the ionic and nanoparticles content. Si-containing particles can be present in cappuccino powder as large aggregates and Si- and Al-containing particles in hot chocolate. Ti-containing NPs (80-200 nm) were found in chewing gum and Ag NPs in silver pearls (50-150 nm) used for decoration pastry.

Total As and As speciation from worldwide collected red wine samples.

Total As and As speciation were measured in 147 red wines collected worldwide by ICP-MS and HPLC-ICP-MS, respectively. The samples included mid-priced to prestigious wines with vintages covering a period of almost 50 years. Total As concentration ranged from below 0.1 to 56 µg/L (average value: 4.0 ± 5.9 µg/L). None of the samples presented a concentration exceeding the limit set by the Office of Vine and Wine of 200 µg/L. Inorganic As was the most abundant form, representing from about half to all total As, mainly as As(III). Dimethylarsinic-acid (DMA) was detected in slightly less than half of the samples, accounting for a few to several dozens of percent. Monomethylarsonic-acid (MMA) was only detected in a few samples. In average, the DMA concentration seemed to be higher in the Bordeaux wines than in the other ones, irrespective of the total As concentration.

Screening of TiO2 and Au nanoparticles in cosmetics and determination of elemental impurities by multiple techniques (DLS, SP-ICP-MS, ICP-MS and ICP-OES).

Cosmetics are part of the daily life of most of the people. Thus, a complete characterization of the products we applied in our skin is necessary. In this work, an analytical investigation of a wide variety of cosmetics from the point of view of total element content and metallic nanoparticles (NPs) has been performed. Firstly, we analyzed the total element content by ICP-MS and ICP-OES after acid digestion as an assessment of the presence of metal impurities. Prohibited elements in cosmetics, according to the European Commission regulation No 1223/2009, were not detected, and only elements mentioned in the label were found (e.g. Al, Fe, Ti and Si). Secondly, a screening of the presence of NPs has been performed by Dynamic Light Scattering (DLS) and Single Particle Inductively-Coupled Plasma Mass Spectrometry (SP-ICP-MS). Two sample preparation procedures were applied. The first protocol consisted in the preparation of suspensions in 0.1% w/v SDS and the second based on defatting with hexane followed by resuspension in water. DLS was employed as a routine method for a fast analysis of NPs, but this technique showed limitations due to the lack of specificity. SP-ICP-MS analyses were then performed, first as a screening technique to evaluate the presence of TiO2 and Au NPs in cosmetics suspensions prepared in SDS; and second, when a positive answer was obtained about the presence of NPs from the screening, SP-ICP-MS was used for particle size determination. Results showed that only TiO2 NPs were present in two sunscreens, one anti-wrinkle day cream, one lip balm protector labeled as 'nano' and in one brand of toothpaste not labeled as 'nano'. Sizes obtained for both sample preparations were compared and ranged from 30 to 120nm in most of the samples.

Effect of water table variations and input of natural organic matter on the cycles of C and N, and mobility of As, Zn and Cu from a soil impacted by the burning of chemical warfare agents: A mesocosm study.

A mesocosm study was conducted to assess the impact of water saturation episodes and of the input of bioavailable organic matter on the biogeochemical cycles of C and N, and on the behavior of metal(loid)s in a soil highly contaminated by the destruction of arsenical shells. An instrumented mesocosm was filled with contaminated soil taken from the "Place-à-Gaz" site. Four cycles of dry and wet periods of about one month were simulated for 276days. After two dry/wet cycles, organic litter sampled on the site was added above the topsoil. The nitrogen cycle was the most impacted by the wet/dry cycles, as evidenced by a denitrification microbial process in the saturated level. The concentrations of the two most mobile pollutants, Zn and As, in the soil water and in the mesocosm leachate were, respectively, in the 0.3-1.6mM and 20-110µM ranges. After 8months of experiment, about 83g·m-3 of Zn and 3.5g·m-3 of As were leached from the soil. These important quantities represent <1% of the solid stock of this contaminant. Dry/wet cycles had no major effect on Zn mobility. However, soil saturation induced the immobilization of As by trapping As V but enhanced As III mobility. These phenomena were amplified by the presence of bioavailable organic matter. The study showed that the natural deposition of forest organic litter allowed a part of the soil's biological function to be restored but did not immobilize all the Zn and As, and even contributed to transport of As III to the surrounding environment. The main hazard of this type of site, contaminated by organo-arsenic chemical weapons, is the constitution of a stock of As that may leach into the surrounding environment for several hundred years.

Optimization and validation of the methods for the total mercury and methylmercury determination in breast milk.

The objective of the work was to develop and validate methods for the total Hg and methylmercury (MeHg) in breast milk that could be further used to obtain first data on chemical contamination of French breast milk. For total Hg determination, the potential of two techniques, namely Advanced Mercury Analyzer (AMA) and ICP MS, was compared. For MeHg determination, ICP MS detection associated to a quantification by isotopic dilution was used and the potential of a preliminary separation by gas or liquid chromatography was evaluated and discussed. The optimization studies have shown that AMA for total Hg determination and HPLC - ID - ICP MS, after a preconcentration step by freeze-drying, for MeHg quantification were the most relevant methods to use for epidemiologic studies. The figures of merit for both methods were evaluated by means of accuracy profiles in terms of limits of quantification (1.82 and 1.35µg Hg/kg dry weight, corresponding to 0.22 and 0.16µg Hg/kg wet basis for total Hg and MeHg, respectively), repeatability (2-11% and 3-8% for total Hg and MeHg respectively), intermediate precision reproducibility (4-12% and 4-8% for total Hg and MeHg respectively) and trueness bias (-0.1-9% and -4-0% for total Hg and MeHg respectively). The methods were then applied to 180 breast milk samples. Total Hg concentrations ranged from

Optimisation of selective alkaline extraction for Cr(VI) determination in dairy and cereal products by HPIC-ICPMS using an experimental design.

This study presents the optimisation through an experimental design then the validation of a method to determine Cr(VI) in certain foodstuffs by high-performance ionic chromatography with inductively coupled plasma mass spectrometry. This method is free from interferences possibly associated with chloride and organic or inorganic carbon. Analytical performances assessed by the accuracy profile method were satisfactory in terms of linearity, specificity, sensitivity, accuracy, repeatability and intermediate precision. Limits of quantification ranged from 0.6µg.kg(-1) in dairy products to 0.8µg.kg(-1) in cereal products. The method was applied to the determination of Cr(VI) in dairy and cereal products from different brands and origins. Despite the method's very high sensitivity, Cr(VI) was not found in all the studied samples. This confirms the results of the most recent studies using an on-line speciation method, and invalidates older studies that found traces of Cr(VI) in food by using a less specific off-line speciation method.

Thiomonas sp. CB2 is able to degrade urea and promote toxic metal precipitation in acid mine drainage waters supplemented with urea.

The acid mine drainage (AMD) in Carnoulès (France) is characterized by the presence of toxic metals such as arsenic. Several bacterial strains belonging to the Thiomonas genus, which were isolated from this AMD, are able to withstand these conditions. Their genomes carry several genomic islands (GEIs), which are known to be potentially advantageous in some particular ecological niches. This study focused on the role of the "urea island" present in the Thiomonas CB2 strain, which carry the genes involved in urea degradation processes. First, genomic comparisons showed that the genome of Thiomonas sp. CB2, which is able to degrade urea, contains a urea genomic island which is incomplete in the genome of other strains showing no urease activity. The urease activity of Thiomonas sp. CB2 enabled this bacterium to maintain a neutral pH in cell cultures in vitro and prevented the occurrence of cell death during the growth of the bacterium in a chemically defined medium. In AMD water supplemented with urea, the degradation of urea promotes iron, aluminum and arsenic precipitation. Our data show that ureC was expressed in situ, which suggests that the ability to degrade urea may be expressed in some Thiomonas strains in AMD, and that this urease activity may contribute to their survival in contaminated environments.

Cr(VI) speciation in foods by HPLC-ICP-MS: investigation of Cr(VI)/food interactions by size exclusion and Cr(VI) determination and stability by ion-exchange on-line separations.

A method has been developed for the specific and sensitive determination of Cr(VI) in foods. First, the interactions between Cr(VI) and the matrices were investigated by size-exclusion HPLC-ICP-MS (SEC-ICP-MS). Evidence was found for the complexation of Cr(VI) potentially present with the ligands. For quantification of Cr(VI), the method was based on an alkaline extraction (NH4OH solution at pH 11.5) followed by Cr(VI) determination by anion-exchange HPLC-ICP-MS. Analytical performances of the method were satisfactory in terms of linearity, specificity, accuracy, repeatability, and intermediate precision. Detection limits ranged from 1 to 10 µg/kg, depending on the matrices investigated. The method was then applied for the determination of Cr(VI) in several products (dairy products, flour, chocolate, vegetables, fruits, meat, fish, eggs, and beverages) from different brands and origins. Cr(VI) was found in none of the samples investigated. To further investigate the reason for this absence, a stability study of spiked Cr(VI) was therefore conducted. A semi-skimmed cow milk was selected for this study. Cr(VI) was shown to be unstable in this matrix with a degradation rate increasing with the temperature.

Metagenomic insights into microbial metabolism affecting arsenic dispersion in Mediterranean marine sediments.

Microorganisms dwelling in sediments have a crucial role in biogeochemical cycles and are expected to have a strong influence on the cycle of arsenic, a metalloid responsible for severe water pollution and presenting major health risks for human populations. We present here a metagenomic study of the sediment from two harbours on the Mediterranean French coast, l'Estaque and St Mandrier. The first site is highly polluted with arsenic and heavy metals, while the arsenic concentration in the second site is below toxicity levels. The goal of this study was to elucidate the potential impact of the microbial community on the chemical parameters observed in complementary geochemical studies performed on the same sites. The metagenomic sequences, along with those from four publicly available metagenomes used as control data sets, were analysed with the RAMMCAP workflow. The resulting functional profiles were compared to determine the over-represented Gene Ontology categories in the metagenomes of interest. Categories related to arsenic resistance and dissimilatory sulphate reduction were over-represented in l'Estaque. More importantly, despite very similar profiles, the identification of specific sequence markers for sulphate-reducing bacteria and sulphur-oxidizing bacteria showed that sulphate reduction was significantly more associated with l'Estaque than with St Mandrier. We propose that biotic sulphate reduction, arsenate reduction and fermentation may together explain the higher mobility of arsenic observed in l'Estaque in previous physico-chemical studies of this site. This study also demonstrates that it is possible to draw sound conclusions from comparing complex and similar unassembled metagenomes at the functional level, even with very low sequence coverage.

Evaluation of hexavalent chromium extraction method EPA method 3060A for soils using XANES spectroscopy.

Hexavalent chromium (Cr(VI)) occurrence in soils is generally determined using an extraction step to transfer it to the liquid phase where it is more easily detected and quantified. In this work, the performance of the most common extraction procedure (EPA Method 3060A) using NaOH-Na(2)CO(3) solutions is evaluated using X-ray absorption near edge structure spectroscopy (XANES), which enables the quantification of Cr(VI) directly in the solid state. Results obtained with both methods were compared for three solid samples with different matrices: a soil containing chromite ore processing residue (COPR), a loamy soil, and a paint sludge. Results showed that Cr(VI) contents determined by the two methods differ significantly, and that the EPA Method 3060A procedure underestimated the Cr(VI) content in all studied samples. The underestimation is particularly pronounced for COPR. Low extraction yield for EPA Method 3060A was found to be the main reason. The Cr(VI) present in COPR was found to be more concentrated in magnetic phases. This work provides new XANES analyses of SRM 2701 and its extraction residues for the purpose of benchmarking EPA 3060A performance.

Taxonomic and functional prokaryote diversity in mildly arsenic-contaminated sediments.

Arsenic-resistant prokaryote diversity is far from being exhaustively explored. In this study, the arsenic-adapted prokaryotic community present in a moderately arsenic-contaminated site near Sainte-Marie-aux-Mines (France) was characterized, using metaproteomic and 16S rRNA-encoding gene amplification. High prokaryotic diversity was observed, with a majority of Proteobacteria, Acidobacteria and Bacteroidetes, and a large archaeal community comprising Euryarchaeaota and Thaumarchaeota. Metaproteomic analysis revealed that Proteobacteria, Planctomycetes and Cyanobacteria are among the active bacteria in this ecosystem. Taken together, these results highlight the unsuspected high diversity of the arsenic-adapted prokaryotic community, with some phyla never having been described in highly arsenic-exposed sites.

Unsuspected diversity of arsenite-oxidizing bacteria as revealed by widespread distribution of the aoxB gene in prokaryotes.

In this study, new strains were isolated from an environment with elevated arsenic levels, Sainte-Marie-aux-Mines (France), and the diversity of aoxB genes encoding the arsenite oxidase large subunit was investigated. The distribution of bacterial aoxB genes is wider than what was previously thought. AoxB subfamilies characterized by specific signatures were identified. An exhaustive analysis of AoxB sequences from this study and from public databases shows that horizontal gene transfer has likely played a role in the spreading of aoxB in prokaryotic communities.

Partitioning of metal species during an enriched fuel combustion experiment. speciation in the gaseous and particulate phases.

Combustion processes are the most important source of metal in the atmosphere and need to be better understood to improve flue gas treatment and health impact studies. This combustion experiment was designed to study metal partitioning and metal speciation in the gaseous and particulate phases. A light fuel oil was enriched with 15 organometallic compounds of the following elements: Pb, Hg, As, Cu, Zn, Cd, Se, Sn, Mn, V, Tl, Ni, Co, Cr, and Sb. The resulting mixture was burnt in a pilot-scale fuel combustion boiler under controlled conditions. After filtration of the particles, the gaseous species were sampled in the stack through a heated sampling tube simultaneously by standardized washing bottles-based sampling techniques and cryogenically. The cryogenic samples were collected at -80 degrees C for further speciation analysis by LT/GC-ICPMS. Three species of selenium and two of mercury were evidenced as volatile species in the flue gas. Thermodynamic predictions and experiments suggest the following volatile metal species to be present in the flue gas: H2Se, CSSe, CSe2, SeCl2, Hg(0), and HgCl2. Quantification of volatile metal species in comparison between cryogenic techniques and the washing bottles-based sampling method is also discussed. Concerning metal partitioning, the results indicated that under these conditions, at least 60% (by weight) of the elements Pb, Sn, Cu, Co, Tl, Mn, V, Cr, Ni, Zn, Cd, and Sb mixed to the fuel were found in the particulate matter. For As and Se, 37 and 17%, respectively, were detected in the particles, and no particulate mercury was found. Direct metal speciation in particles was performed by XPS allowing the determination of the oxidation state of the following elements: Sb(V), Tl(III), Mn(IV), Cd(II), Zn(II), Cr(III), Ni(II), Co(II), V(V), and Cu(II). Water soluble species of inorganic Cr, As, and Se in particulate matter were determined by HPLC/ICP-MS and identified in the oxidation state Cr(III), As(V), and Se(IV).