Molecularly imprinted polymers for selective extraction of rosmarinic acid from Rosmarinus officinalis L.

This study provides a robust and reproducible approach for selective extraction of rosmarinic acid (RA) using molecularly imprinted polymers (MIPs). Computational modeling and UV spectroscopic analysis were performed to optimize MIP synthesis. Consequently, six different bulk and surface imprinted polymers were generated using RA as the template. Binding performance of the imprinted polymers was evaluated using static equilibrium and complementary dynamic rebinding experiments. Despite the high selectivity of thus generated surface imprinted polymers, the corresponding bulk polymers exhibited better binding performance when serving as sorbents during solid phase extraction (SPE). An optimized molecularly imprinted solid phase extraction (MISPE) protocol was developed in respect to loaded amount of RA, composition of the loading solution, washing solvent, and elution volume. Thereby, a remarkably selective extraction of RA from real-world Rosmarinus officinalis L. extract with a recovery rate and purity of 81.96 ± 6.33% and 80.59 ± 0.30%, respectively, was achieved.

Fabrication of Magnetic Molecularly Imprinted Beaded Fibers for Rosmarinic Acid.

The present study describes the fabrication of molecularly imprinted (MI) magnetic beaded fibers using electrospinning. Rosmarinic acid was selected as exemplary yet relevant template during molecular imprinting. A "design of experiments" methodology was used for optimizing the electrospinning process. Four factors, i.e., the concentration of the biodegradable polymer (polycaprolactone), the applied voltage, the flow rate, and the collector distance were varied in a central composite design. The production process was then optimized according to the suitability of the beaded fibers during microrobot fabrication, actuation, and drug release. The optimum average fiber diameter of MI beaded fibers was determined at 857 ± 390 nm with an average number of beads at 0.011 ± 0.002 per µm2. In vitro release profiles of the optimized MI beaded fibers revealed a lower burst rate and a more sustained release when compared to control fibers. Magnetic control of the MI beaded fibers was successfully tested by following selected waypoints along a star-shaped predefined trajectory. This study innovatively combines molecular imprinting technology with magnetic microrobots enabling targeted drug delivery systems that offer precise motion control via the magnetic response of microrobots along with selective uptake of a drug into the microrobot using MI beaded fibers in future.

Preparation and application of molecularly imprinted polymer for isolation of chicoric acid from Chicorium intybus L. medicinal plant.

Molecularly imprinted polymer (MIP) was synthesized and applied for the extraction of chicoric acid from Chicory herb (Chicorium intybus L.). A computational study was developed to find a suitable template to functional monomer molar ratio for MIP preparations. The molar ratio was chosen based on the comparison of the binding energy of the complexes between the template and functional monomers. Based on the computational results, eight different polymers were prepared using chicoric acid as the template. The MIPs were synthesized in a non-covalent approach via thermal free-radical polymerization, using two different polymerization methods, bulk and suspension. Batch rebinding experiments were performed to evaluate the binding properties of the imprinted polymers. The best results were obtained with a MIP prepared using bulk polymerization with 4-vinylpyridine (4-VP) as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the crosslinker with a molar ratio of 1:4:20. The best MIP showed selective binding ability toward chicoric acid in the presence of the template's structural analogues, caffeic acid, caftaric acid and chlorogenic acid.