Evaluation of dental pulp stem cells response to flowable nano-hybrid dental composites: A comparative analysis.

BACKGROUND: Flowable resin composites (FRC) are tooth-colored restorative materials that contain a lower filler particle content, and lower viscosity than their bulk counterparts, making them useful for specific clinical applications. Yet, their chemical makeup may impact the cellular population of the tooth pulp. This in-vitro study assessed the cytocompatibility and odontogenic differentiation capacity of dental pulp stem cells (DPSCs) in response to two recent FRC material extracts. METHODS: Extracts of the FRC Aura easyflow (AEF) and Polofil NHT Flow (PNF) were applied to DPSCs isolated from extracted human teeth. Cell viability of DPSCs was assessed using MTT assay on days 1, 3 and 7. Cell migration was assessed using the wound healing assay. DPSCs' capacity for osteo/odontogenic differentiation was assessed by measuring the degree of mineralization by Alizarin Red S staining, alkaline phosphatase enzyme (ALP) activity, and monitoring the expression of osteoprotegerin (OPG), RUNX Family Transcription Factor 2 (RUNX2), and the odontogenic marker dentin sialophosphoprotein (DSPP) by RT-PCR. Monomer release from the FRC was also assessed by High-performance liquid chromatography analysis (HPLC). RESULTS: DPSCs exposed to PNF extracts showed significantly higher cell viability, faster wound closure, and superior odontogenic differentiation. This was apparent through Alizarin Red staining of calcified nodules, elevated alkaline phosphatase activity, and increased expression of osteo/odontogenic markers. Moreover, HPLC analysis revealed a higher release of TEDGMA, UDMA, and BISGMA from AEF. CONCLUSIONS: PNF showed better cytocompatibility and enhancement of odontogenic differentiation than AEF.

Photobiomodulation and low-intensity pulsed ultrasound synergistically enhance dental mesenchymal stem cells viability, migration and differentiation: an invitro study.

Novel methods and technologies that improve mesenchymal stem cells (MSCs) proliferation and differentiation properties are required to increase their clinical efficacy. Photobiomodulation (PBM) and low-intensity pulsed ultrasound (LIPUS) are two strategies that can be used to enhance the regenerative properties of dental MSCs. This study evaluated the cytocompatibility and osteo/odontogenic differentiation of dental pulp, periodontal ligament, and gingival MSCs after stimulation by either PBM or LIPUS and their combined effect. MTT assay, cell migration assay, osteo/odontogenic differentiation by AR staining and ALP activity, and expression of osteo/odontogenic markers (OPG, OC, RUNX2, DSPP, DMP1) by RT-qPCR were evaluated. Statistical analysis was performed using ANOVA, followed by Tukey's post hoc test, with a p-value of less than 0.05 considered significant. The results showed that combined stimulation by PBM and LIPUS resulted in significantly the highest viability of MSCs, the fastest migration, the most dense AR staining, the most increased ALP activity, and the most elevated levels of osteogenic and odontogenic markers. The synergetic stimulation of PBM and LIPUS can be utilized in cell-based regenerative approaches to promote the properties of dental MSCs.

Anatomical Analysis of Inferior Alveolar Nerve Relation to Mandibular Posterior Teeth Using Cone Beam Computed Tomography: A Retrospective Radiographic Analysis Study.

Introduction: Cone beam computed tomography (CBCT) is reliable in the assessment of structures related to teeth. The assessment of the inferior alveolar neurovascular (IAN) bundle location using CBCT is considered one of its prime uses in different mandibular surgeries. Methodology: Retrospective CBCT data of patients presented to the institute were assessed to measure relations of IAN. Measurements were taken to assess the bone thickness adjacent to IAN, the superior-inferior dimension between the canal and the teeth, and the dimension between the canal and the inferior border of the mandible. Results: Out of the 170 patients the root apices nearest to the IAN were that of the second molars (1.76 ± 1.86 mm). The IAN was closest to the inferior border of the mandible at the roots of the second molars (8 ± 3.4 mm). The buccal bone thickness had its greater dimension buccal to the IAN at the area of the second molar (5.16 ± 1.26 mm). Conclusion: Two mini-plates in trauma do not increase the risk of injury. It is advisable in apicectomy not to extend 1.5 mm apically. The thickness of the nerve-lateralization window should not exceed 2 mm. In body osteotomy procedure, perform surgery anterior to premolars as much as possible.

Impact of Angle of File Access and Location of Canal Curvature on the Dynamic Cyclic Fatigue of Nickel Titanium Rotary Instruments.

OBJECTIVE: To evaluate the impact of different file access angles and root canal curvature's location on the fatigue failure of One Curve (OC) and E3 Azure (EZ) NiTi files using a dynamic model at simulated body temperature. METHODS: Eighty new instruments with similar tip sizes and taper (#25/0.06) from two NiTi rotary systems, One Curve and E3 Azure, were tested at simulated body temperatures (37°C) using a custom-made dynamic cyclic fatigue device. Instruments were divided into four subgroups according to the location of root canal curvature (a coronal curve 5 mm from the root canal orifice and an apical curve 10 mm from the root canal orifice) and the angle of file access (0° or 30°). Instruments were operated in simulated stainless-steel canals having a 60° curve and a 3 mm radius. A custom-made device produced controlled vertical pecks during file rotation. Time to failure (sec) was registered, and the length of the fragment segments was measured (mm). Data were analysed statistically with One-Way ANOVA and Tukey post hoc tests. The significance level was set at 5%. All separated instruments were examined by scanning electron microscope. RESULTS: One-way ANOVA (p<0.05) found a significant difference among the tested instruments. Post Hoc analysis revealed lower cyclic fatigue resistance when the angle of file access was 30º, and the root canal curvature was located coronally for both files (p<0.0001). Three-way ANOVA showed that the angle of file access was the most influential contributor to cyclic fatigue, followed by the location of file curvature and, finally, the file type (p<0.0001). The fractographic examination revealed a predominantly ductile fracture mode for all tested instruments. The lengths of all fractured segments showed no significant difference (p>0.05), indicating an accurate trajectory during testing. CONCLUSION: OC files had superior cyclic fatigue resistance than EZ files; coronal curvatures negatively impacted cyclic fatigue resistance compared to apical curvatures, while the angle of file access presented the highest impact on dynamic cyclic fatigue.

Physicochemical properties of AH plus bioceramic sealer, Bio-C Sealer, and ADseal root canal sealer.

BACKGROUND: The aim of this study was to evaluate the physicochemical properties of two newly introduced premixed calcium silicate-based root canal sealers (AH Plus Bioceramic Sealer and Bio-C Sealer) compared to a resin-based root canal sealer (ADseal root canal sealer). METHODS: Solubility, pH analysis, calcium ion release, and film thickness of each sealer were evaluated following ISO guidelines. The data were examined using the two-way ANOVA test. Furthermore, X-ray diffraction (XRD) examination was performed to investigate the crystalline phase of each type of sealer. X-ray fluorescence (XRF) analysis was done for the chemical elemental analysis of each sealer. RESULTS: The least film thickness, highest alkalinity, and highest calcium ion release were all displayed by AH Plus Bioceramic Sealer. High solubility, high alkalinity, intermediate calcium ion release, and intermediate film thickness were all displayed by Bio-C Sealer. While ADseal root canal sealer displayed the greatest film thickness, least solubility, alkalinity, and calcium ion release. CONCLUSIONS: Both AH Plus Bioceramic Sealer and Bio-C Sealer represented adequate properties to be considered a good sealer that could be used as a potential alternative to resin-based root canal sealers.

Two­year clinical performance of indirect restorations fabricated from CAD/CAM nano hybrid composite versus lithium disilicate in mutilated vital teeth. A randomized controlled trial.

TRIAL DESIGN: This is a randomized, controlled, superiority, double-blinded, parallel-group, two-arms trial with an allocation ratio of 1:1. The aim of this trial was to compare the two-year clinical performance of partial indirect restorations fabricated from CAD/CAM nano-hybrid composite and ceramic lithium disilicate blocks using the modified USPHS criteria. METHODS: In two parallel groups (n = 50 restorations), fifty participants having mutilated vital teeth with a minimum of two remaining walls were randomly enrolled in this trial and received indirect restorations of either nano-hybrid composite resin blocks (Brilliant, Coltene, Switzerland) or Lithium Disilicate (IPS Emax CAD). The restorations were assessed using modified USPHS criteria by two independent blinded assessors at baseline, six months, one-year and two years follow-up visits. Categorical and ordinal data were presented as frequencies and percentages. Categorical data were analyzed using the chi-square test. Ordinal data were analyzed using the Mann-Whitney U test for intergroup comparisons and Freidman's test followed by the Nemenyi post hoc test for intragroup comparisons. Numerical data were presented as mean and standard deviation values. They were analyzed for normality using the Shapiro-Wilk test. Data were found to be normally distributed and were analyzed using the independent t-test. The significance level was set at p ≤ 0.05 within all tests. RESULTS: Forty-eight participants received the allocated intervention and completed the follow-up periods. There was a statistically significant difference between both tested materials for all USPHS criteria regarding Marginal integrity and Marginal discoloration at six-months Follow-up, but with no statistically significant difference at one- and two-year follow-up. CONCLUSIONS: Both materials showed an acceptable, successful clinical performance along the two-years follow-up period. CLINICAL RELEVANCE: The CAD/CAM nano-hybrid composite blocks are as reliable as Lithium disilicate for restoring mutilated vital teeth.

How loss of tooth structure impacts the biomechanical behavior of a single-rooted maxillary premolar: FEA.

To evaluate the influence of the loss of coronal and radicular tooth structure on the biomechanical behavior and fatigue life of an endodontically treated maxillary premolar with confluent root canals using finite element analysis (FEA). An extracted maxillary second premolar was scanned to produce intact (IT) 3D model. Models were designed with an occlusal conservative access cavity (CAC) with different coronal defects; mesial defect (MO CAC), occlusal, mesial and distal defect (MOD CAC), and 2 different root canal preparations (30/.04, and 40/.04) producing 6 experimental models. FEA was used to study each model. A simulation of cycling loading of 50N was applied occlusally to stimulate the normal masticatory force. Number of cycles till failure (NCF) was used to compare strength of different models and stress distribution patterns via von Mises (vM) and maximum principal stress (MPS). The IT model survived 1.5 × 1010 cycles before failure, the CAC-30.04 had the longest survival of 1.59 × 109, while the MOD CAC-40.04 had the shortest survival of 8.35 × 107 cycles till failure. vM stress analysis showed that stress magnitudes were impacted by the progressive loss of coronal tooth structure rather than the radicular structure. MPS analysis showed that significant loss of coronal tooth structure translates into more tensile stresses. Given the limited size of maxillary premolars, marginal ridges have a critical role in the biomechanical behavior of the tooth. Access cavity preparation has a much bigger impact than radicular preparation on their strength and life span.

Comparative biological properties of resin-free and resin-based calcium silicate-based endodontic repair materials on human periodontal ligament stem cells.

OBJECTIVES: To investigate the effect of three different calcium silicate-based materials (CSBM) on the biological behavior of human periodontal ligament stem cells (hPDLSCs). METHODS: Eluates of Biodentine, NeoPutty and TheraCal PT prepared at 1:1, 1:2, and 1:4 ratios were extracted under sterile conditions. The cytotoxicity of the extracts to the hPDLSCs was assessed using the MTT assay. Scratch wound healing assay was utilized for assessing cell migration. Scanning electron microscopy was used to detect cell attachment and morphology. Calcium ion release was measured using inductively coupled plasma-optical emission spectrometry; the pH-value was evaluated with a pH-meter. ANOVA with post hoc Tukey test was used for statistical analysis. RESULTS: Cell viability was significantly higher for Biodentine and NeoPutty at day 1 with all dilutions (p < 0.05), while at day 3 and day 7 with dilutions 1:2 and 1:4; all materials showed similar behavior (p > 0.05). Biodentine had the highest percentage of cell migration into the scratched area at day 1 for all dilutions (p < 0.05). Stem cells were attached favorably on Biodentine and NeoPutty with evident spreading, and intercellular communications; however, this was not shown for TheraCal PT. Biodentine showed the highest pH values and calcium ion release (p < 0.05). CONCLUSIONS: The resin-free CSBM showed better performance and favorable biological effects on hPDLSCs and were therefore considered promising for usage as endodontic repair materials. CLINICAL SIGNIFICANCE: Proper selection of materials with favorable impact on the host stem cells is crucial to ensure outcome in different clinical scenarios.

Options for Access Cavity Designs of Mandibular Incisors: Mechanical Aspects from Finite Element Study.

INTRODUCTION: This study investigated different access cavity designs of mandibular anteriors in terms of their effect on the biomechanical behavior and longevity using finite element analysis (FEA). METHODS: A 3-dimensional model of a mandibular incisor was created for FEA. After validating the intact tooth (IT) model, 4 experimental models were developed (traditional lingual access cavity [TLA], facial access cavity [FAC], incisal access cavity [ICA], and cervical access cavity [CVA]). Cyclic loading was simulated, and the number of cycles until failure (NCF) was compared to the IT model. Stress distribution patterns, maximum von Mises stresses (vMSs), and maximum principal stresses (MPSs) were analyzed mathematically. The safety factor was also calculated and demonstrated. RESULTS: The maximum vMS registered on the IT model was 134.16 MPa. The FCA and the CVA provided the highest NCF (193.7% compared with the IT model) followed by ICA (58.2%) and TLA (21.4%). The vM and MPS analysis revealed that the lingual surface is a primary stress channel, and the presence of an access cavity significantly weakens the tooth structure. Although the maximum vMS registered for the IT model was 134.16 MPa, the maximum vMS was 73.97 MPa for both the FCA and the CVA, 152.27 MPa for the ICA, and 173.63 MPa for the TLA. CONCLUSIONS: The facial and cervical access cavity designs provided considerable reinforcement to the endodontically treated mandibular incisors. With advancements in esthetic restorative materials and endodontic instruments, facial access design could emerge as the new standard for access cavity preparation in mandibular incisors.

Thermal, chemical and physical analysis of VDW.1Seal, Fill Root ST, and ADseal root canal sealers.

This study aimed to evaluate the thermal, chemical, and physical properties of VDW.1Seal, Fill Root ST, and ADseal sealers. Thermal properties were analyzed using Thermogravimetric analysis (TGA) and Differential thermal analysis (DTA). Attenuated total reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR) analysis was performed as a complementary test to confirm TGA/DTA analysis. The chemical composition of the set sealer material was identified using an X-ray powder diffraction (XRD) system. Other physical properties of each sealer were investigated; ten specimens were used to measure the solubility (at 24 h and 28 days), and another ten specimens were used to assess pH changes and calcium ion release (after 7 and 14 days). Film thickness was done according to ISO 6876 specs. The data were analyzed using the two-way ANOVA test. Results showed that for all sealers, TGA analysis revealed a direct relationship between sealer mass loss and temperature rise. In addition, the decomposition of the tested sealers started at 145 °C, 135 °C and 91 °C for VDW.1Seal, ADseal sealer, and Fill Root ST, respectively. XRD analysis revealed a higher degree of crystallinity for VDW.1Seal and ADseal. ADseal showed the least solubility; VDW.1Seal exhibited the highest alkalinity, calcium ion release, and the lowest film thickness.

Effect of Proximal Caries-driven Access on the Biomechanical Behavior of Endodontically Treated Maxillary Premolars.

INTRODUCTION: This study investigated the effects from the carious cavity and access from it on the fracture resistance of endodontically treated maxillary premolars using finite element analysis (FEA). METHODS: A maxillary premolar was used to compare 3 types of access cavity related to having a proximal carious defect: caries-driven access (CDA), conservative access that has a mesial component (MCA), as well as traditional access with the same mesial component (MTA). Cyclic loading was simulated on the occlusal surface, and number of cycles until failure (NCF) was compared with the intact tooth model (IT). Mathematical analysis was done to evaluate the stress distribution patterns and calculated maximum von Mises (vM) and maximum principal stresses (MPS), with emphasis on pericervical region as a specific area of interest. RESULTS: Maximum vM registered on the IT was 6.14 MPa. CDA provided the highest NCF with 92.28% of the IT, followed by MCA (84.90%) and MTA (83.79%). The vM and MPS analysis showed that the stress values and patterns are affected more by the proximity of the occlusal load to the tooth/restoration interface. Concerning the pericervical region, maximum vM was registered for IT (4.11 MPa), followed by CDA (4.85 MPa) and then MCA (8.13 MPa) and MTA (8.61 MPa), whereas the MPS analysis revealed that CDA showed the highest magnitude of tensile stresses. CONCLUSIONS: A proximal CDA benefits the mechanical properties of maxillary premolars; however, its impact on the biological aspect should be assessed to provide a ruling for/against it.

Effect of rapamycin on human periodontal ligament stem cells that have been exposed to sodium hypochlorite.

AIMS: The present study investigated the effect of rapamycin on the viability and osteogenic differentiation potential of human periodontal ligament stem cells (hPDLSCs) in the presence of sodium hypochlorite (NaOCl). MAIN METHODS: After determining the minimum inhibitory concentration of NaOCl and optimum concentration of rapamycin, the viability of hPDLSCs was evaluated using the MTT assay subsequent to their exposure to NaOCl, rapamycin, or a combination of both. Osteogenic differentiation was evaluated by the cell mineralization assay performed by alizarin red S staining, alkaline phosphatase activity, and monitoring the expression of osteogenic genes markers Runt-related transcription factor 2, osteocalcin, and osteoprotegerin, using real-time quantitative polymerase chain reaction (RT-qPCR). The expression of autophagy-related genes PI3K, Akt, and mTOR, was also analyzed with RT-qPCR. KEY FINDINGS: Stem cells treated with rapamycin showed the highest percentage of viable cells in the presence of NaOCl. The same trend was observed for all osteogenic differentiation assays. The hPDLSCs treated with rapamycin demonstrated the highest calcium nodule deposition, alkaline phosphatase activity, and the expression of osteogenic gene markers. These effects were not adversely affected by the presence of NaOCl. Rapamycin significantly inhibited mTOR gene expression, while there were no differences in the gene expression of PI3K and Akt. SIGNIFICANCE: Rapamycin counteracts the cytotoxic effect of NaOCl by enhancing the viability and osteogenic differentiation potential of hPDLSCs. Rapamycin appears to accomplish these processes via autophagy activation, by inhibiting mTOR gene expression. The incorporation of rapamycin in regenerative endodontic therapy may encourage a higher success rate.

Parallel endodontic education via social media: An exploratory survey study.

There is insufficient research to evaluate social media's influence on endodontic education. Therefore, this study assessed the percentage of students utilising Facebook in their education and the factors influencing their engagement. A survey was conducted on dental students, interns and dentists undertaking specialist programmes. Categorical data were analysed using Fisher's Exact test and multiple pairwise comparisons. The significance level was set at p < 0.05. Responses were received from 801 participants, with 98.4% using Facebook for endodontic knowledge. Although most students knew that scientific evidence is not always provided, they still deemed such information valuable as it was a practical demonstration of clinical cases. Most students turn to Facebook for endodontic education to compensate for the gap between their academic education and clinical practice. The utilisation of social media for education can be a concerning phenomenon and should not be ignored by academic institutes.

A microcomputed tomographic analysis of the morphological variabilities and incidence of extra canals in mandibular first molar teeth in an Egyptian subpopulation.

A well-protected microbial habitat may be present in the root and canal morphology, which is varied and complicated. Before initiating effective root canal treatment, a detailed knowledge of the root and canal anatomical variances in each tooth is a must. This study aimed to investigate the root canal configuration, apical constriction anatomy, location of the apical foramen, dentine thickness, and prevalence of accessory canals in mandibular molar teeth in an Egyptian subpopulation using micro-computed tomography (microCT). A total of 96 mandibular first molars were scanned using microCT, and 3D reconstruction was performed using Mimics software. The root canal configurations of each of the mesial and distal root were classified with two different classification systems. The prevalence and dentin thickness around middle mesial and middle distal canals were investigated. The number, location and anatomy of major apical foramina and the apical constriction anatomy analysed. The number and location of accessory canals were identified. Our findings showed that two separate canals (15%) and one single canal (65%) were the most common configuration in the mesial and distal roots, respectively. More than half of the mesial roots had complex canal configurations and 51% had middle mesial canals. The single apical constriction anatomy was the most common for both canals followed by the parallel anatomy. Disto-lingual and distal locations of the apical foramen are the most common location for both roots. Mandibular molars in Egyptians show a wide range of variations in root canal anatomy with high prevalence of middle mesial canals. Clinicians should be aware of such anatomical variations for successful root canal treatment procedures. A specific access refinement protocol and appropriate shaping parameters should be designated for each case to fulfil the mechanical and biological objectives of root canal treatment without compromising the longevity of treated teeth.

The Biomechanical Behaviour and life span of a Three-Rooted Maxillary First Premolar with Different Access Cavity Designs: A Finite Element Analysis.

OBJECTIVE: The present study aimed to evaluate the influence of different access cavity designs on the biomechanical behaviour of a three-rooted maxillary first premolar using finite element analysis (FEA). METHODS: Three experimental FEA models were generated: the intact tooth (IT) model, the traditional access cavity (TAC) model, and the conservative access cavity (CAC) model. In both TAC and CAC models, root canals preparation was simulated as follows: the mesiobuccal and distobuccal canals with a final tip size of 30 and taper of 0.04 and the palatal canal with a final tip size of 35 and taper of 0.04. Cyclic loading of 50 N was simulated on the occlusal surface of the three models. The number of cycles until failure (NCF), the location of failure, stress distribution patterns, maximum von Mises (VM), and maximum principal stress (MPS) were all evaluated and compared. RESULTS: Both types of access cavity preparation caused a reduction in the lifelog of the tooth; when compared to the IT model the TAC model had a lifelog of 94.82% while the CAC model had a lifelog of 95.80%. The maximum VM stresses value was registered on the occlusal surface of the TAC model (7 MPa), while the minimum was on the occlusal surface of the IT (6.2 MPa). MPS analysis showed that the highest stress value was recorded on the occlusal surface of the CAC model (7.71 MPa), while the least was recorded on the occlusal surface of the TAC model (3.77 MPa). Radicular stresses were always of minimal value regardless the model. CONCLUSION: The relation between the access cavity margins and the functional load points is a deciding factor that influences the biomechanical behaviour and fatigue life of endodontically treated teeth. (EEJ-2023-01-03).

Root and canal morphology of mandibular second molars in an Egyptian subpopulation: a cone-beam computed tomography study.

BACKGROUND: This study was using Cone beam computed tomography (CBCT) to examine the anatomical variations in mandibular second molars in an Egyptian sub-population. METHODS: A total of 350 CBCT images (215 females and 135 males, aged 15-65 years) of mandibular second molars were evaluated. Samples were evaluated in terms of: number of roots, number of root canals, roots' cross section as well as prevalence and configurations of C-shaped canals. Statistical analysis was done to highlight differences between different categories and their prevalence among genders (significance level was set at p < 0.05). Data were presented as frequency and percentage values and were analyzed using chi square test followed by pairwise comparisons utilizing multiple Fisher's exact tests with Bonferroni correction. The significance level was set at p < 0.05 within all tests. RESULTS: Of the 350 mandibular second molars evaluated, 87.2% were non-C-shaped while 12.8% were C-shaped with no gender-based statistically significant differences (χ2 = 0.19, p = 0.656). Most samples had three root canals (80%) followed by two (16%), then one (3.2%), and finally four (0.8%) root canals. Among the non-C-shaped molars, presence of two roots was most common (83.4%) followed by presence of a single root (16.2%), and only one sample (0.2%) had three roots, and this had no correlation with gender (χ2 = 1.86, p = 0.431). In the mesial roots Type IV Vertucci was the most common configuration found (68.8%), while Type I was the most prevalent in the distal roots (91.8%). The long oval configuration was the most commonly found cross section in mesial roots while "oval" was the most prevalent in distal roots. CONCLUSION: Egyptian sub-population shows highly variable morphological features in mandibular second molars, hence, CBCT is highly recommended on case-to-case conditions.

Effect of Different Sealers on the Cytocompatibility and Osteogenic Potential of Human Periodontal Ligament Stem Cells: An In Vitro Study.

BACKGROUND: There is tendency for unavoidable sealer extrusion in some clinical cases. This might adversely affect host stem cells and affect healing. This study aimed to investigate the effect of different sealers on the cytocompatibility and osteogenic potential of human periodontal ligament stem cells (hPDLSCs). METHODS: The cytotoxic effect of the extracted elutes of VDW.1Seal (VDW.1), Endosequence BC Sealer HiFlow (ES), GuttaFlow-2 (GF), and ADSeal (AD-S) on the hPDLSCs was determined using the MTT assay. Cell proliferation and migration were assessed by the scratch wound healing assay. Osteogenic differentiation potential was assessed. Measurement of pH values and calcium ions release was performed. RESULTS: GF had a significantly higher percentage of viable cells. The cell migration assay showed that GF demonstrated the lowest open wound area percentage. GF and AD-S showed the highest calcium nodule deposition. GF demonstrated higher ALP activity than ES. Expression of RUNX2 and OC genes was similar for all sealers, while OPG gene expression was significantly higher for VDW.1 and GF. ES and AD-S displayed the highest pH values on day 1. Calcium ion release of ES and VDW.1 was significantly the highest. CONCLUSIONS: GuttaFlow-2 and VDW.1Seal sealers have favorable behavior toward host stem cells.

Optimum Shaping Parameters of the Middle Mesial Canal in Mandibular First Molars: A Finite Element Analysis Study.

INTRODUCTION: This study investigated the effect of shaping parameters of 2 different configurations of middle mesial canals (MMCs) on the biomechanical behavior and life span of a mandibular first molar using finite element analysis (FEA). METHODS: A mandibular molar with an independent MMC and another with a confluent MMC were scanned via micro-computed tomography, and FEA models were produced. For each tooth, an intact model and 5 experimental models were produced that differed by parameters of how the MMC was shaped: unshaped MMC, 25/.04, 25/.06, 30/.04, and 30/.06. Cyclic loading of 50 N was applied on the occlusal surface in vertical and oblique scenarios, and the number of cycles until failure (NCF) was compared with the intact models. In addition, mathematical analyses evaluated the stress distribution patterns and calculated maximum von Mises and maximum principal stresses. RESULTS: For both the independent and confluent MMC models, shaping the MMC reduced the NCF. The lifelog percentage of models was inversely proportional with radicular shaping parameters during the vertical and oblique loading scenarios. The shaping size of 30/.06 resulted in lower lifelog percentage than the cases with shaping size of 25/.04 in both of the independent and confluent MMC models. For all models, oblique loading reduced NCF more than vertical loading. CONCLUSION: Shaping the MMC should be kept as conservative as 25/.04. Also, whether the MMC is independent or confluent is a deciding factor in whether to increase the apical diameter or the root canal taper when larger shaping parameters are needed.

Fracture resistance of root canal-treated molars restored with ceramic overlays with/without different resin composite base materials: an in vitro study.

The objective of the study was to evaluate the effect of different restorative protocols on fracture resistance of root canal-treated molars. 48 mandibular first molars were used and divided into six groups (n = 8); G1 (negative control): teeth kept intact. G2 (positive control): teeth had root canal treatment and standard MOD cavity preparations but kept unrestored. G3: prepared as G2 and directly restored with VitaEnamic ceramic overlays (CO). G4: as G3, but the pulp chamber was restored first with smart dental restorative (SureFil SDR flow = SDR) bulk-fill flowable composite base. G5: as G3, but the pulp chamber was restored first with SonicFill (SF) bulk-fill composite base. G6: as G3, but the pulp chamber was restored first with a fiber-reinforced composite (FRC) base. All samples were subjected to thermocycling between 5 °C and 55 °C in a water bath for a total of 2000 cycles with 10 s dwell time. Then specimens were individually mounted on a computer-controlled testing machine with a load cell of 5 kN, and the maximum load to produce fracture (N) was recorded. Data were analyzed using one-way ANOVA followed by Tukey's post hoc test (P = 0.05). There was a significant difference between the groups (P < 0.001). Teeth restored with FRC and ceramic overlays had the highest load-bearing capacity. Pulp chamber restoration with either FRC or SDR before ceramic overlay fabrication provided significantly better tooth reinforcement than ceramic overlay alone (P < 0.001). Fracture modes were analyzed to determine the type of fracture as repairable or catastrophic, where FRC + CO and SDR + CO groups had favorable fracture modes that were mostly repairable. When restoring root canal-treated molars with overlays, the pulp chamber should be sealed with either FRC or SDR to ensure the best possible fracture resistance. The clinical relevance of the study is that a new simple restorative protocol is presented to enhance the survival of root canal-treated molars using ceramic overlays.