RESUMEN
In the last decade, there has been an increase in research on ecologically benign, cost-effective, and socially useful cement alternative materials for concrete. Alternatives involve industrial and agriculture waste, the potential advantages of which may be recognized by recycling, repurposing, and recreating techniques. Important energy reserves and a decrease in Portland cement (PC) consumption may be attained by using these wastes as supplementary and substitute ingredients, contributing to a reduction in carbon dioxide (CO2) production. Consequently, the incorporation of marble dust powder (MDP) and calcined clay (CC) as supplementary cementitious material (SCM) in high strength concrete may lower the environmental effect and reduce the amount of PC in mixes. This study is conducted on concrete containing 0%, 5%, 10%, 15%, and 20% of MDP and CC as cementitious materials alone and in combination. The main objectives of this investigations are to examine the effect of MDP and CC as cementitious materials on the flowability and mechanical characteristics of high strength concrete. In order to examine the ecological effect of CC and MDP, the eco-strength efficiency and embodied carbon were considered. In this context, there are so many trial mixes were performed on cubical specimens for achieving targeted compressive strength about 60 MPa after 28 days. After getting it, a total of 273 concrete specimens (cubes, cylinders, and prisms) were used to test the compressive, splitting tensile, and flexural strength of high strength concrete correspondingly. Moreover, when the amount of MDP and CC as SCM in the mixture grows, the workability of green concrete decreases. In addition, the compressive strength, flexural strength, and splitting tensile strength are increased by 6.38 MPa, 67.66 MPa, and 4.88 MPa, respectively, at 10% SCM (5% MDP and 5% CC) over a period of 28 days. In addition, using ANOVA, response prediction models were generated and confirmed at a 95% level of significance. The R2 values of the models varied from 96 to 99%. Furthermore, increasing the amount of CC and MDP as SCM in concrete also reduces the amount of carbon embedded in the material. It is recommended that the utilization of 10% SCM (5% MDP and 5% CC) in high strength concrete is providing optimum outcomes for construction industry in the field of Civil Engineering.
RESUMEN
Ground vibration due to blasting is identified as a challenging issue in mining and civil activities. Peak particle velocity (PPV) is one of the blasting undesirable consequences, which is resulted during emission of vibration in blasted bench. This study focuses on the PPV prediction in the surface mines. In this regard, two ensemble systems, i.e., the ensemble of artificial neural networks and the ensemble of extreme gradient boosting (EXGBoosts) were developed for PPV prediction in one of the largest lead-zinc open-pit mines in the Middle East. For ensemble modeling, several ANN and XGBoost base models were separately designed with different architectures. Then, the validation indices such as coefficient determination (R2), root mean square error (RMSE), mean absolute error (MAE), the variance accounted for (VAF), and Accuracy were used to evaluate the performance of the base models. The five top base models with high accuracy were selected to construct an ensemble model for each of the methods, i.e., ANNs and XGBoosts. To combine the outputs of the top base models and achieve a single result stacked generalization technique, was employed. Findings showed ensemble models increase the accuracy of PPV predicting in comparison with the best individual models. The EXGBoosts was superior method for predicting of the PPV, which obtained values of R2, RMSE, MAE, VAF, and Accuracy corresponding to the EXGBoosts were (0.990, 0.391, 0.257, 99.013(%), 98.216), and (0.968, 0.295, 0.427, 96.674(%), 96.059), for training and testing datasets, respectively. However, the sensitivity analysis indicated that the spacing (r = 0.917) and number of blast-holes (r = 0.839) had the highest and lowest impact on the PPV intensity, respectively.
RESUMEN
To investigate the effect of water on the mechanical properties and acoustic emission (AE) characteristics of coal in the failure and deformation processes. Coal samples of different content were subjected to uniaxial compression tests and AE signals were monitored. The characteristics of the AE signals were further analyzed using fractal analysis. The results show that saturated coal samples have substantially reduced mechanical properties such as uniaxial compressive strength (UCS), dissipation energy, peak stress, and elastic modulus. Under loading, stress-strain curves are characterized by five distinct stages: (1) compaction; (2) linear elastic; (3) crack stable propagation; (4) crack accelerating propagation; and (5) post-peak and residual stages. Using phase-space theory, a novel Grassberger Procaccia (GP) algorithm was utilized to find the AE fractal characteristics of coal samples in different stages. It is significant to note that AE energy does not exhibit fractal characteristics in either the first or second stages. Contrary to the first two stages, the third stage showed obvious fractal characteristics. Fractal analysis of AE time sequences indicates that fractal dimension values change as stress increases, indicating the initiation of complex microcracks in coal. In the fourth stage, the fractal dimension rapidly declines as the strength reaches its limit, indicating the occurrence of macrocracks. However, fractal dimensions continued to decrease further or increased slightly in the fifth stage. Consequently, the coal begins to collapse, potentially resulting in a disaster and failure. It is, therefore, possible to accurately predict coal and rock dynamic failures and microcrack mechanisms by observing the subsequent sudden drop in the correlation dimension of the AE signals in response to different stages of loading.
RESUMEN
Waste ceramic concrete (WOC) made from waste ceramic floor tiles has several economic and environmental benefits. Fire is one of the most common disasters in buildings, and WOC is a brittle construction material; therefore, the mechanical properties of WOC structures under high temperatures should be considered. According to previous studies, hybrid fiber can further reduce damage to concrete under high temperatures. Meanwhile, crack width and propagation are among the key characteristics of concrete materials that need to be considered, but few studies have focused on their behavior when subjected to elevated temperatures. The new concrete materials proposed by the authors are WOC and WOC-Hybrid. WOC was prepared with Natural Coarse Aggregates (NCA), Natural Fine Aggregate (NFA), Ordinary Portland Cement (OPC 43 grade), and ceramic waste tiles with 20% replacements for coarse aggregates, 10% replacements for fine aggregates, and 10% replacement for cement. In contrast, WOC-Hybrid was prepared with the addition of hybrid fiber (1% crimped steel fiber and 1% polyvinyl alcohol fiber) in WOC. The specimens were exposed to temperatures of 100-300 °C, and then the specimens were tested for tensile and compressive strength. The present study aims to find a new method to improve concrete resistance to elevated temperatures at the lowest costs by experimental and computational analysis via machine learning models. The application of machine learning models such as artificial neural networks (ANN) and multiple linear regression (MLR) was employed in this study to predict the compressive and tensile strength of concrete. The linear coefficient correlation (R2) and mean square error (MSE) were evaluated to investigate the performance of the models. Based on the experimental analysis, the results show that the effect of hybrid fiber on the crack width and propagation is greater than that on the crack width and propagation of WOC and PC after exposure to high temperatures. However, the enhanced effect of hybrid fiber on the mechanical properties, rack width, and propagation decreases after subjecting it to a high-temperature treatment, owing to the melting and ignition of hybrid fibers at high temperatures. Regarding the computational analysis, it was found that the developed MLR model shows higher efficiency than ANN in predicting the compressive and tensile strength of PC, WOC, and WOC-Hybrid concrete.
RESUMEN
This study investigates the mechanical and durability properties of fly ash-based engineered cementitious composites (ECC). The effect of various mineral additions, such as wheat husk ash (WHA), rice husk ash (RHA), glass powder (GP), and fibrillated polypropylene (PP) fibers, on mechanical performance, water absorption, and porosity was investigated. Furthermore, the durability of ECC specimens was assessed in terms of sorptivity, acid/sulfate attacks, electric resistivity (ER), rapid chloride penetration (RCPT), and ultrasonic pulse velocity (UPV). The results revealed higher mechanical strength, UPV, and ER values for RHA-based ECC. After 180 days of immersion in acid and sulfate solutions, RHA-based ECC showed a lower loss in compressive strength (23.21% and 1.07% in HCl and Na2SO4, respectively) relative to the control mix (44% and 7% in HCl and Na2SO4, respectively). Moreover, analytical characterizations such as X-ray diffraction (XRD), Fourier transform infrared (FTIR), Scanning Electron Microscopy (SEM), and Energy dispersive X-ray (EDX) analyses were also carried out to corroborate the mechanical and durability properties of ECC.
RESUMEN
Construction and demolition (C&D) waste was considered as zero value materials and, as a result, most C&D waste materials ended up in landfills, eventually constituting environmental issues. Therefore, it is important to explore the potential of such C&D waste materials for concrete production. Thus, this research effort aims to find a new method to improve sustainable concrete properties exposed to elevated temperatures at the lowest costs and identify the relationship between temperature change and a change in colour in a heat-exposed concrete structure. Therefore, this study explored the behaviour of three types of concrete: plain concrete (PC), waste ceramic optimal concrete (WOC), and waste ceramic optimal concrete reinforced by hybrid fibre (WOC-Hybrid) in ambient and elevated temperature. The study shows that colour change in a concrete structure exposed to high temperature has a consistent relationship, where it has been found that the colour alteration is of great interest because its appearance usually coincides with the onset of a significant loss of concrete strength as a result of elected temperatures. Overall, it can be considered that waste ceramic materials reinforced by hybrid fibres can be used for concrete production, and by doing so, the negative impact of these wastes on the environment can be controlled as well as fortify the mechanical properties.
RESUMEN
Ground vibration induced by blasting operations is considered one of the most common environmental effects of mining projects. A strong ground vibration can destroy buildings and structures, hence its prediction and minimization are of high importance. The aim of this study is to estimate the ground vibration through a hybrid soft computing (SC) method, called RSM-SVR, which comprises two main regression techniques: the response surface model (RSM) and support vector regression (SVR). The RSM-SVR model applies an RSM in the first calibrating process and an SVR in the second calibrating process to improve the accuracy of the ground vibration predictions. The predicted results of an RSM, which are obtained using the input data of problems, are used as the input dataset for the regression process of an SVR. The effectiveness and agreement of the RSM-SVR model were compared to those of an SVR optimized with the particle swarm optimization (PSO) and genetic algorithm (GA), RSM, and multivariate linear regression (MLR) based on several statistical factors. The findings confirmed that the RSM-SVR model was considerably superior to other models in terms of accuracy. The amounts of coefficient of determination (R 2) were 0.896, 0.807, 0.782, 0.752, 0.711, and 0.664 obtained from the RSM-SVR, PSO-SVR, GA-SVR, MLR, SVR, and RSM models, respectively.
Asunto(s)
Vibración , Modelos LinealesRESUMEN
BACKGROUND: The Health Office of Aceh aims to eliminate malaria from Aceh Province, Indonesia by 2015. Malaria was formerly common in Aceh (population 4.5 million), but has declined dramatically in recent years consequent to post-tsunami control efforts. Successful elimination will depend upon rapid and accurate diagnosis and case follow-up at community level. A prerequisite to this is widespread coverage of high quality malaria diagnosis. This study describes the results of a comprehensive assessment of the malaria diagnostic capacity in Aceh as the province moves towards malaria elimination. METHODS: The study was conducted in 23 districts in Aceh from October 2010 to July 2011. Six types of questionnaires were used to collect data on competency of microscopists and laboratory capacity. Standardized slides were used to evaluate the proficiency of all microscopists. In addition, site visits to 17 primary health centres (PHC) assessed diagnostic practice and logistics capacity. RESULTS: Five hundred and seventy four malaria microscopists have been officially registered and assigned to duty in the 23 districts in Aceh Province. They work in 345 laboratories, predominantly in PHCs (69 %) and hospitals (25 %). Three laboratories were evaluated as adequate for all 30 elements, while 29 laboratories were adequate for less than five of 30 elements. Standardized proficiency tests showed that 413 microscopists were at basic (in training) level, with 10 advanced and 9 reference level. No microscopist achieved expert level. Neither the province nor any of Aceh's districts has a standardized inventory and logistics database for malaria diagnostics, nor did any of the surveyed laboratories operate a quality assurance programme for either microscopy or rapid diagnostic tests. CONCLUSIONS: The study highlights the importance of careful assessment of diagnostic capacity when embarking upon a large-scale malaria elimination programme. Aceh's laboratories have minimal infrastructure with nearly all microscopists still in training. On the positive side, a large workforce of microscopists has been assigned to laboratories with the needed equipment. Aceh will need to embark on a large-scale comprehensive quality assurance scheme if it is to achieve malaria elimination.
Asunto(s)
Personal de Laboratorio , Malaria/diagnóstico , Microscopía/normas , Adulto , Anciano , Femenino , Humanos , Indonesia , Personal de Laboratorio/estadística & datos numéricos , Malaria/prevención & control , Masculino , Microscopía/estadística & datos numéricos , Persona de Mediana Edad , Encuestas y Cuestionarios , Adulto JovenRESUMEN
OBJECTIVES: The aim of this study is to investigate the efficacy of topical application of mitomycin C after dilation in pediatric patients having post corrosive esophageal stricture. METHODS: Thirty patients with post corrosive esophageal strictures were divided into two groups: 12 patients had repeated esophageal dilation without mitomycin C application, 18 patients had repeated esophageal dilation and topical application of mitomycin C. RESULTS: There was a highly significant difference in the improvement of dysphagia grade at the end of follow up in the mitomycin C group (p=0.005). The number of repetition of dilatation ranged from 2 to 6 (median=3) in the 1st group, and 2 to 4 (median=2.5) in the mitomycin C group. There were no adverse effects from the topical application of the mitomycin C. CONCLUSIONS: Topical application of mitomycin C after oesophageal dilation can be beneficial in improving dysphagia in patients with post corrosive oesophageal stricture.
Asunto(s)
Antibióticos Antineoplásicos/uso terapéutico , Quemaduras Químicas/complicaciones , Dilatación , Estenosis Esofágica/terapia , Mitomicina/uso terapéutico , Administración Tópica , Cáusticos , Niño , Preescolar , Trastornos de Deglución/etiología , Trastornos de Deglución/terapia , Estenosis Esofágica/etiología , Esofagoscopía , Femenino , Humanos , Masculino , Estudios Prospectivos , Índice de Severidad de la EnfermedadRESUMEN
BACKGROUND: The purpose of this study was to investigate the role of intraoperative application of mitomycin C in prevention of glottic restenosis after posterior transverse CO2 laser cordotomy (PTLC) for patients with post-thyroidectomy bilateral vocal fold paralysis. METHODS: Twenty-five patients with an impaired airway because of bilateral vocal fold paralysis were treated with PTLC. Patients were divided into groups: the mitomycin C group (13 patients) had PTLC and topical mitomycin C; and the control group (12 patients) had PTLC only. RESULTS: No patients in the mitomycin C group developed glottic granulation or laryngeal scarring, whereas 5 of 12 patients in the control group developed granulation (p = .014) and 2 of 12 patients had laryngeal scarring (p = .28). Ten of 13 patients in the mitomycin C group ended up with mild dyspnea with no limitation to normal everyday activities whereas only a third of the control group achieved this outcome (p = .05). CONCLUSION: The use of topical mitomycin C has been shown to decrease postoperative laryngeal granulation, scarring, restenosis, and the need for revision surgery.