Unveiling the interactions between biomaterials and heterocyclic dyes: A sustainable approach for wastewater treatment.

The present Review investigates the interactions between biomaterials and heterocyclic dyes, focusing on their potential application in sustainable wastewater treatment. Heterocyclic dyes are widely used in various industries, resulting in their widespread presence in wastewater, posing environmental challenges. This review explores the utilization of biomaterials as adsorbents for the removal of heterocyclic dyes from contaminated water sources. The interactions between biomaterials, such as cellulose, microfibrilated cellulose and lignin and different heterocyclic dyes are examined through reported experimental analysis and characterization techniques. The study evaluates the adsorption capacity, kinetics, and thermodynamics of the biomaterial-dye systems to elucidate the underlying mechanisms and optimize the treatment process. The review highlight the promising potential of biomaterial-based approaches for sustainable wastewater treatment, providing insights for the development of efficient and environmentally friendly dye removal technologies.

Calf thymus ds-DNA intercalation with pendimethalin herbicide at the surface of ZIF-8/Co/rGO/C3N4/ds-DNA/SPCE; A bio-sensing approach for pendimethalin quantification confirmed by molecular docking study.

Pendimethalin (PND) is a herbicide that is regarded to be possibly carcinogenic to humans and toxic to the environment. Herein, we fabricated a highly sensitive DNA biosensor based on ZIF-8/Co/rGO/C3N4 nanohybrid modification of a screen-printed carbon electrode (SPCE) to monitor PND in real samples. The layer-by-layer fabrication pathway was conducted to construct ZIF-8/Co/rGO/C3N4/ds-DNA/SPCE biosensor. The physicochemical characterization techniques confirmed the successful synthesis of ZIF-8/Co/rGO/C3N4 hybrid nanocomposite, as well as the appropriate modification of the SPCE surface. The utilization of ZIF-8/Co/rGO/C3N4 nanohybrid as a modifier was analyzed using. The electrochemical impedance spectroscopy results showed that the modified SPCE exhibited significantly lowered charge transfer resistance due to the enhancement of its electrical conductivity and facilitation of the transfer of charged particles. The proposed biosensor successfully quantified PND in a wide concentration range of 0.01-35 µM, with a limit of detection (LOD) value of 8.0 nM. The PND monitoring capability of the fabricated biosensor in real samples including rice, wheat, tap, and river water samples was verified with a recovery range of 98.2-105.6%. Moreover, to predict the interaction sites of PND herbicide with DNA, the molecular docking study was performed between the PND molecule and two sequence DNA fragments and confirmed the experimental findings. This research sets the stage for developing highly sensitive DNA biosensors that will be used to monitor and quantify toxic herbicides in real samples by fusing the advantages of nanohybrid structures with crucial knowledge from a molecular docking investigation.

Application of zeolite based nanocomposites for wastewater remediation: Evaluating newer and environmentally benign approaches.

The presence of heavy metal ions and emerging pollutants in water poses a great risk to various biological ecosystems as a result of their high toxicity. Consequently, devising efficient and environmentally friendly methods to decontaminate these waters is of high interest to many researchers around the world. Among the varied water treatment and desalination means, adsorption and photocatalysis have been widely employed. However, the discussion and analysis of the use of zeolite-based composites as adsorbents are somehow minimal. The porous aluminosilicates (zeolites) are excellent candidates in wastewater treatment owing to various mechanisms of pollutants removal that they possess. The purpose of this review is thus to provide a synopsis of the current developments in the fabrication and application of nanocomposites based on zeolite as adsorbents and photocatalysts for the extraction of heavy metals, dyes and emerging pollutants from wastewaters. The review goes on to look into the effect of weight ratio on photocatalyst, photodegradation pathways, and various factors that influence photocatalysis and adsorption.

Lignin as a bioactive polymer and heavy metal absorber- an overview.

As a pulping and bio-refinery by-product with phenolic chemical structure, lignin indicated high potential as natural antioxidant activity, UV blocker, antibacterial and toxic material absorbent properties. Presence of phenolic hydroxyl groups in lignin structure plays the main role of its antioxidant activity. However, lignin antioxidant power can change depending on its other structural features and functional groups like ortho-methoxy groups, -OCH3 groups, the α-CH2 groups, the aliphatic carbonyl groups, and the size of π-conjugated systems. Lignin in mixture with synthetic polymers, improved their thermal stability. Lignin has high UV light absorbing potential in broad-spectrum (UVA, UVB). Adding 1-5% of lignin into hand cream indicated excellent range of sun protection factor (SPF) with more than 95% UV light absorption. Lignin also indicated strong UV light protection when applied in different transparent film and protect paint, oil, and varnish from UV degradation. Lignosulfonate and other modified lignin including chemically modification, nano-particles and lignin hydrogel indicated high potential as heavy metal absorber.

Lignin as a UV Light Blocker-A Review.

Lignin is the by-product of pulp and paper industries and bio-refining operations. It is available as the leading natural phenolic biopolymer in the market. It has chromophore functional groups and can absorb a broad spectrum of UV light in range of 250-400 nm. Using lignin as a natural ingredient in sunscreen cream, transparent film, paints, varnishes and microorganism protection has been actively investigated. Both in non-modified and modified forms, lignin provides enhancing UV protection of commercial products with less than a 10% blend with other material. In mixtures with other synthetic UV blockers, lignin indicated synergic effects and increased final UV blocking potential in compare with using only synthetic UV blocker or lignin. However, using lignin as a UV blocker is also challenging due to its complex structure, polydispersity in molecular weight, brownish color and some impurities that require more research in order to make it an ideal bio-based UV blocker.

The morphology, self-assembly, and host-guest properties of cellulose nanocrystals surface grafted with cholesterol.

Cellulose nanocrystals (CNC) were prepared using acid hydrolysis of cellulose fiber. The CNC modified topo-chemically by grafting of bulky cholesterol moieties which changed subsequent morphology, thermal behavior, lyotropic crystalline properties, and host-guest release behavior. Bond formation between the cellulose nanocrystals surfaces and cholesterol was confirmed by FT-IR and solid-state NMR. The product indicated strong hydrophobic characteristics with an ordered chiral nematic self-assembly. This novel biomaterials were exploited through uptake of folic acid as part of a preliminary host-guest system. The guest molecule released as a function of physiologically relevant pHs was examined.

Cholesterol-modified lignin: A new avenue for green nanoparticles, meltable materials, and drug delivery.

Two fractions of kraft lignin of low and high molecular weight were reacted with cholesteryl chloroformate (Chol.Cl) to produce a modified lignin that demonstrated very high hydrophobicity. Surprisingly, both fractions displayed discernible melting points as opposed to the starting lignin. The suspension in water also gave rise to nanoparticles that displayed sizes in the range of 200-500 nm that were shown to satisfactorily load and release folic acid, a representative hydrophobic molecule, within the context of drug delivery.

Surface modification of nanosatrch using nano silver: a potential antibacterial for food package coating.

Starch nanocrystal was prepared using weak sulfuric acid hydrolysis at 40 °C. Transmission electron micrographs of dilute suspensions of starch nanocrystals showed round particles with a diameter ranging from 20 to 40 nm. SEM of freeze dried samples showed separated particles between 40 and 100 nm and confirmed production of starch nano particles. XRD patterns obtained for the prepared nanostarch and raw starch sample showed no special pattern of crystallinity for starch sample. Extracted nanostarch showed pattern of crystallinity with the peaks at Bragg angles (2θ) at about 15° and 23°, and a doublet at 17° and 18°. The crystalline structure of prepared sample was A-type. FTIR spectra confirmed the particles oxidation. Nano silver particle was precipitated on the starch nano particle. UV spectra confirmed the presence of silver particle on the starch particles. Inhibitions tests of nanostarch bearing nano silver on three types of bacteria was investigated. The inhibition test results were 25 µg/mL for S. aureus, and S. typhi, and 12.5 µg/mL for E. coli.

Enhanced Cancer Immunotherapy by Microneedle Patch-Assisted Delivery of Anti-PD1 Antibody.

Despite recent advances in melanoma treatment through the use of anti-PD-1 (aPD1) immunotherapy, the efficacy of this method remains to be improved. Here we report an innovative self-degradable microneedle (MN) patch for the sustained delivery of aPD1 in a physiologically controllable manner. The microneedle is composed of biocompatible hyaluronic acid integrated with pH-sensitive dextran nanoparticles (NPs) that encapsulate aPD1 and glucose oxidase (GOx), which converts blood glucose to gluconic acid. The generation of acidic environment promotes the self-dissociation of NPs and subsequently results in the substantial release of aPD1. We find that a single administration of the MN patch induces robust immune responses in a B16F10 mouse melanoma model compared to MN without degradation trigger or intratumoral injection of free aPD1 with the same dose. Moreover, this administration strategy can integrate with other immunomodulators (such as anti-CTLA-4) to achieve combination therapy for enhancing antitumor efficacy.

Synthesis, Characterization, and Antimicrobial Efficacy of Photomicrobicidal Cellulose Paper.

Toward our goal of scalable, antimicrobial materials based on photodynamic inactivation, paper sheets comprised of photosensitizer-conjugated cellulose fibers were prepared using porphyrin and BODIPY photosensitizers, and characterized by spectroscopic (infrared, UV-vis diffuse reflectance, inductively coupled plasma optical emission) and physical (gel permeation chromatography, elemental, and thermal gravimetric analyses) methods. Antibacterial efficacy was evaluated against Staphylococcus aureus (ATCC-2913), vancomycin-resistant Enterococcus faecium (ATCC-2320), Acinetobacter baumannii (ATCC-19606), Pseudomonas aeruginosa (ATCC-9027), and Klebsiella pneumoniae (ATCC-2146). Our best results were achieved with a cationic porphyrin-paper conjugate, Por((+))-paper, with inactivation upon illumination (30 min, 65 ± 5 mW/cm(2), 400-700 nm) of all bacterial strains studied by 99.99+% (4 log units), regardless of taxonomic classification. Por((+))-paper also inactivated dengue-1 virus (>99.995%), influenza A (∼ 99.5%), and human adenovirus-5 (∼ 99%). These results demonstrate the potential of cellulose materials to serve as scalable scaffolds for anti-infective or self-sterilizing materials against both bacteria and viruses when employing a photodynamic inactivation mode of action.

Quantitative 31P NMR analysis of solid wood offers an insight into the acetylation of its components.

As a solid substrate, wood and its components are almost invariably examined via spectroscopic or indirect methods of analysis. Unlike earlier approaches, in this effort we dissolve pulverized wood in ionic liquid and then directly derive its functional group contents by quantitative (31)P NMR. As such, this novel analytical methodology is thoroughly examined and an insight into the detailed way acetylation proceeds on solid wood and its components is provided as a function of wood density and within its various anatomical features. As anticipated, the efficiency of acetylation was found to be greater within low density wood than in high density wood. The lignin, the cellulose and the hemicelluloses of the low density wood was found to be acetylated nearly twice as fast with remarkable differences in their quantitative degree of acetylation amongst them. This direct analytical data validates the applied methodology and confirms, for the first time, that the order of acetylation in solid wood is lignin>hemicellulose>cellulose and no reactivity differences exist between early wood and late wood.

Kraft lignin chain extension chemistry via propargylation, oxidative coupling, and Claisen rearrangement.

Despite its aromatic and polymeric nature, the heterogeneous, stochastic, and reactive characteristics of softwood kraft lignin seriously limit its potential for thermoplastic applications. Our continuing efforts toward creating thermoplastic lignin polymers are now focused at exploring propargylation derivatization chemistry and its potential as a versatile novel route for the eventual utilization of technical lignins with a significant amount of molecular control. To do this, we initially report the systematic propargylation of softwood kraft lignin. The synthesized derivatives were extensively characterized with thermal methods (DSC, TGA), (1)H, (13)C, and quantitative (31)P NMR and IR spectroscopies. Further on, we explore the versatile nature of the lignin pendant propargyl groups by demonstrating two distinct chain extension chemistries; the solution-based, copper-mediated, oxidative coupling and the thermally induced, solid-state, Claissen rearrangement polymerization chemistries. Overall, we show that it is possible to modulate the reactivity of softwood kraft lignin via a combination of methylation and chain extension providing a rational means for the creation of higher molecular weight polymers with the potential for thermoplastic materials and carbon fibers with the desired control of structure-property relations.

Porphyrin-cellulose nanocrystals: a photobactericidal material that exhibits broad spectrum antimicrobial activity.

Towards our overall objectives of developing potent antimicrobial materials to combat the escalating threat to human health posed by the transmission of surface-adhering pathogenic bacteria, we have investigated the photobactericidal activity of cellulose nanocrystals that have been modified with a porphyrin-derived photosensitizer (PS). The ability of these previously synthesized porphyrin-cellulose-nanocrystals (CNC-Por (1)) to mediate bacterial photodynamic inactivation was investigated as a function of bacterial strain, incubation time and illumination time. Despite forming an insoluble suspension, CNC-Por (1) showed excellent efficacy toward the photodynamic inactivation of Acinetobacter baumannii, multidrug-resistant Acinetobacter baumannii (MDRAB) and methicillin-resistant Staphylococcus aureus (MRSA), with the best results achieving 5-6 log units reduction in colony forming units (CFUs) upon illumination with visible light (400-700 nm; 118 J cm(-2)). CNC-Por (1) mediated the inactivation of Pseudomonas aeruginosa, although at reduced activity (2-3 log units reduction). Confocal laser scanning microscopy of CNC-Por (1) after incubation with A. baumannii or S. aureus suggested a lack of internalization of the PS. Research into alternative materials such as CNC-Por (1) may lead to their application in hospitals and healthcare-related industries wherein novel materials with the capability of reducing the rates of transmission of a wide range of bacteria, particularly antibiotic resistant strains, are desired.

Photobactericidal porphyrin-cellulose nanocrystals: synthesis, characterization, and antimicrobial properties.

Adherence and survival of pathogenic bacteria on surfaces leading to concomitant transmission to new hosts significantly contributes to the proliferation of pathogens, which in turn considerably increases the threat to human health, particularly by antibiotic-resistant bacteria. Consequently, more research into effective surface disinfection and alternative materials (fabrics, plastics, or coatings) with antimicrobial and other bioactive characteristics is desirable. This report describes the synthesis and characterization of cellulose nanocrystals that were surface-modified with a cationic porphyrin. The porphyrin was appended onto the cellulose surface via the Cu(I)-catalyzed Huisgen-Meldal-Sharpless 1,3-dipolar cycloaddition having occurred between azide groups on the cellulosic surface and porphyrinic alkynes. The resulting, generally insoluble, crystalline material, CNC-Por (5), was characterized by infrared and diffusion (1)H NMR spectroscopies, gel permeation chromatography, and thermogravimetric analysis. Although only suspended, and not dissolved, in an aqueous system, CNC-Por (5) showed excellent efficacy toward the photodynamic inactivation of Mycobacterium smegmatis and Staphylococcus aureus , albeit only slight activity against Escherichia coli . The synthesis, properties, and activity of CNC-Por (5) described herein serve as a benchmark toward our overall objectives of developing novel, potent, bioactive, photobactericidal materials that are effective against a range of bacteria, with potential utilization in the health care and food preparation industries.