Fibrous wearable and implantable bioelectronics.

Fibrous wearable and implantable devices have emerged as a promising technology, offering a range of new solutions for minimally invasive monitoring of human health. Compared to traditional biomedical devices, fibers offer a possibility for a modular design compatible with large-scale manufacturing and a plethora of advantages including mechanical compliance, breathability, and biocompatibility. The new generation of fibrous biomedical devices can revolutionize easy-to-use and accessible health monitoring systems by serving as building blocks for most common wearables such as fabrics and clothes. Despite significant progress in the fabrication, materials, and application of fibrous biomedical devices, there is still a notable absence of a comprehensive and systematic review on the subject. This review paper provides an overview of recent advancements in the development of fibrous wearable and implantable electronics. We categorized these advancements into three main areas: manufacturing processes, platforms, and applications, outlining their respective merits and limitations. The paper concludes by discussing the outlook and challenges that lie ahead for fiber bioelectronics, providing a holistic view of its current stage of development.

Simultaneous electrophysiological recording and self-powered biosignal monitoring using epidermal, nanotexturized, triboelectronic devices.

The fabrication of multifunctional epidermal electronic devices capable of efficiently reading electrophysiological signals and converting low-amplitude mechanical signals into electric outputs promises to pave the way towards the development of self-powered wearable sensors, smart consumer electronics, and human-machine interfaces. This article describes the scalable and cost-effective fabrication of epidermal, nanotexturized, triboelectronic devices (EnTDs). EnTDs can be conformably worn on the skin and efficiently monitor electrophysiological signals, temperature, and hydration levels. EnTDs, while measuring electrophysiological signals, can also convert imperceptible time-variant body motions into electrical signals using a nanotexturized triboelectric layer, enabling the self-powered monitoring of respiration, swallowing, and arterial pulse. These results suggest the potential of EnTDs as a new class of multifunctional skin-like sensors for biomedical monitoring and self-powered sensing applications.

Rapid Fabrication of Epidermal Paper-Based Electronic Devices Using Razor Printing.

This work describes the use of a benchtop razor printer to fabricate epidermal paper-based electronic devices (EPEDs). This fabrication technique is simple, low-cost, and compatible with scalable manufacturing processes. EPEDs are fabricated using paper substrates rendered omniphobic by their cost-effective silanization with fluoroalkyl trichlorosilanes, making them inexpensive, water-resistant, and mechanically compliant with human skin. The highly conductive inks or thin films attached to one of the sides of the omniphobic paper makes EPEDs compatible with wearable applications involving wireless power transfer. The omniphobic cellulose fibers of the EPED provide a moisture-independent mechanical reinforcement to the conductive layer. EPEDs accurately monitor physiological signals such as ECG (electrocardiogram), EMG (electromyogram), and EOG (electro-oculogram) even in high moisture environments. Additionally, EPEDs can be used for the fast mapping of temperature over the skin and to apply localized thermotherapy. Our results demonstrate the merits of EPEDs as a low-cost platform for personalized medicine applications.

Portable and power-free serodiagnosis of Chagas disease using magnetic levitating microbeads.

This work describes the detection of anti-T. cruzi antibodies in whole blood solutions using magnetic levitating microbeads (MLµBs). This simple diagnostic method can be easily performed by minimally trained personnel using an inexpensive and portable magnetic stage that requires no electricity. A multiphase test tube containing the MLµBs facilitates the sequential incubation, filtering, and reading of the immunoassays. The diagnostic method starts by adding a blood sample to the top phase of the test tube where the anti-T. cruzi antibodies present in the blood attach to the T. cruzi antigens on the surface of the MLµBs. Shaking the test tube after incubation mixes the top layer with a paramagnetic medium loaded with SiO2 microcrystals. The attachment of SiO2 microcrystals to those MLµBs bound to T. cruzi antibodies decreases their levitation height once the tube is placed between two antialigned permanent magnets. Measuring the levitation height of MLµBs enables the accurate detection and quantification of anti-T. cruzi antibodies in the blood across the clinically relevant range, with a detection limit of 5 µg mL-1. The small size of the test tubes facilitates the simultaneous analysis of over 50 different samples. MLµBs act as partial collimators for non-polarized light, facilitating their visual identification by the naked eye or by projecting incident light on a thin paper screen. A machine-vision algorithm was created to automatically interpret the results of the MLµB tests from a digital image, resulting in a rapid, accurate, and user-friendly assay for Chagas disease that can be used in resource-limited settings.

Wearable and Implantable Epidermal Paper-Based Electronics.

Traditional manufacturing methods and materials used to fabricate epidermal electronics for physiological monitoring, transdermal stimulation, and therapeutics are complex and expensive, preventing their adoption as single-use medical devices. This work describes the fabrication of epidermal, paper-based electronic devices (EPEDs) for wearable and implantable applications by combining the spray-based deposition of silanizing agents, highly conductive nanoparticles, and encapsulating polymers with laser micromachining. EPEDs are inexpensive, stretchable, easy to apply, and disposable by burning. The omniphobic character and fibrous structure of EPEDs make them breathable, mechanically stable upon stretching, and facilitate their use as electrophysiological sensors to record electrocardiograms, electromyograms, and electrooculograms, even under water. EPEDs can also be used to provide thermotherapeutic treatments to joints, map temperature spatially, and as wirelessly powered implantable devices for stimulation and therapeutics. This work makes epidermal electronic devices accessible to high-throughput manufacturing technologies and will enable the fabrication of a variety of wearable medical devices at a low cost.

Coalescence of charged droplets in outer fluids.

A controlled technique to produce a precise volume of fluid species, such as water droplets, has critical importance in a variety of industrial applications. Electric field provided a well-established method to produce charged water droplets with a controlled volume. The coalescence of produced charged water droplets, however, impedes the efficiency of electric field-assisted methods. Whereas the coalescence of stationary single droplets, often charged, is overwhelmingly studied in air or vacuum, the effects of surrounding medium and approaching velocity are neglected. Systematic series of experiments and simulations were designed to address the effect of viscosity as well as approaching velocity on the coalescence of charged water droplets in viscous surrounding mediums (µâ€¯= 100 & 1000 cSt). Results suggested that increasing the electrical conductivity of water droplets with lower approaching velocity diminishes the chance of coalescence between water droplets. The higher viscosity of surrounding medium resulted in a lower chance of coalescence between water droplets while droplets with stronger electrical conductivities underwent a lower deformation inside the dielectric medium. Finally, results suggested that water chain formation, which is reportedly a main retarding factor in electrocoalescers, took place for droplets with intermediate sizes in higher viscosities of surrounding medium.

Roll-to-Roll Nanoforming of Metals Using Laser-Induced Superplasticity.

This Letter describes a low-cost, scalable nanomanufacturing process that enables the continuous forming of thin metallic layers with nanoscale accuracy using roll-to-roll, laser-induced superplasticity (R2RLIS). R2RLIS uses a laser shock to induce the ultrahigh-strain-rate deformation of metallic films at room temperature into low-cost polymeric nanomolds, independently of the original grain size of the metal. This simple and inexpensive nanoforming method does not require access to cleanrooms and associated facilities, and can be easily implemented on conventional CO2 lasers, enabling laser systems commonly used for rapid prototyping or industrial cutting and engraving to fabricate uniform and three-dimensional crystalline metallic nanostructures over large areas. Tuning the laser power during the R2RLIS process enables the control of the aspect ratio and the mechanical and optical properties of the fabricated nanostructures. This roll-to-roll technique successfully fabricates mechanically strengthened gold plasmonic nanostructures with aspect ratios as high as 5 that exhibit high oxidation resistance and strong optical field enhancements. The CO2 laser used in R2RLIS can also integrate the fabricated nanostructures on transparent flexible substrates with robust interfacial contact. The ability to fabricate ultrasmooth metallic nanostructures using roll-to-roll manufacturing enables the large scale production, at a relatively low-cost, of flexible plasmonic devices toward emerging applications.

Parametric study on the stabilization of metal oxide nanoparticles in organic solvents: A case study with indium tin oxide (ITO) and heptane.

The tendency of nanoparticles (NPs) to form large aggregates has been a major limitation to their widespread applications where utilizing monodisperse and stable suspension of NPs is essential. The aggregation of NPs becomes more challenging when there is less affinity between the dispersed phase (NPs) and the continuous phase (solvent), such as, dispersion of hydrophilic metal oxide NPs into a nonpolar (organic) solvent. The objective of this study is to systematically investigate the synergistic effects of eight dispersion parameters on the size and stability of indium tin oxide (ITO) NPs in heptane. The matrix of experimentation was designed using an L18 Taguchi method. The analysis of variance (ANOVA) of the experimental results revealed that the most significant factors on the size and stability of NPs were the mass of ITO NPs and the volume of the dispersing agent. Taguchi signal-to-noise (SN) ratio analysis was used to determine the optimal factor levels for the preparation of well-dispersed and stable NP suspensions. Confirmation tests were carried out at the suggested levels of the ANOVA predictive model, and highly stable ITO NPs in heptane with the size distribution of 43.0-68.3nm were obtained. The results of the present parametric study can be used for a broad range of applications where effective stabilization of metal oxide NPs in organic solvents is desired.

Experimental study on the regimes of W/O interface in the presence of vertical electric field.

Electrified interfaces have been used to produce fine particles. Here, we investigate the behavior of planar electrified interface in the presence of vertical electric field. Corn oil and four KCl aqueous solutions with different concentrations are employed. During the experiments, for the first time, four distinct behaviors of electrified interfaces were disclosed and named as: Hump figure of interface, Taylor cone appearance and its rotary motion on the interface, intermittent jetting and thorough ascending of the interface. Taylor cones' mean droplet diameter and their angles, discharging velocity at the tip of the cone, the frequency of Taylor cones appearance, and their merging to each other are studied in this paper. Additionally, the circumstances of interface levitation affected by electric field are some of the major results of this study to gain some insight into the electrified interfaces issue.