Finite Element Analysis of Manufacturing Deformation in Polymer Matrix Composites.

This paper introduces a unique finite element analysis (FEA) technique designed to predict elastic response in polymer matrix composites (PMCs). Extensive research has been conducted to model the manufacturing process of multiple 'L'-shaped components, fabricated from SPRINTTM materials (GLP 43 and GLP 96) at two thicknesses (15 mm and 25 mm). Three distinct FEA methodologies were utilised to determine the impact of thermal loads and rigid fixtures. An error deviation of 3.23% was recorded when comparing simulation results to experimental data, thereby validating the effectiveness of the FEA methodology.

Regulatory considerations and intellectual property rights of repurposed drugs.

Drug repurposing has emerged as a promising approach in the drug discovery and development process as it offers safe and effective therapeutic options in a time effective manner. Though the issues related to pre-clinical and clinical aspects of drug development process are greatly addressed during drug repurposing yet regulatory perspectives gain even more However, like traditional drug development the repurposed drugs face multiple challenges. Such challenges range from the patenting rights, novelty of repurposing, data and market exclusivity to affordability and equitable access to the patient population. In order to optimize the market access of repurposed drugs, regulatory organizations throughout the world have developed accelerated approval procedures. The regulatory bodies have recognized the importance of repurposing approaches and repurposed drugs. Regulatory bodies can encourage the development of repurposed drugs by providing incentives to pharmaceutical companies and more accessible and affordable repurposed agents for the general population. This chapter summarizes the regulatory and ethical considerations pertaining to the repurposed drugs and highlights a few cases of intellectual property rights for repurposed drugs that have helped improve patient's access to safe, efficacious and cost-effective therapeutic options.

Antibacterial Potential of Novel Acetamide Derivatives of 2-Mercaptobenzothiazole: Synthesis and Docking Studies.

2-Mercaptobenzothiazole and its derivatives are widely known for their diverse biological activities, particularly antimicrobial and anticancer potential. In the present study, a series of new hybrid compounds consisting of 2-mercaptobenzothiazole and different aryl amines 2(a-j) were synthesized and characterized by Fourier transform infrared (FTIR), 1H NMR, and 13C NMR spectral data. The synthesized compounds were screened for in vitro antibacterial activities through agar well diffusion assay. Among the series, 2b, 2c, and 2i exhibited significant antibacterial activity comparable to the standard drug levofloxacin. Based on their antibacterial potential, these compounds were further tested for their antibiofilm activity. All of the three compounds showed promising antibiofilm potential, even better than the standard drug cefadroxil at 100 µg/100 µL concentration. Molecular docking studies were performed to explore the antibacterial mechanism of these compounds. Strikingly, the molecule 2i shared the same hydrophobic pockets as those of levofloxacin in case of bacterial kinases and DNA gyrases. In addition, 2i exhibited satisfactory antibiofilm activity in comparison to the standard. Our study therefore suggested that the synthetic compound 2i possesses remarkable antibacterial activity and may serve as a lead molecule for the discovery of potent antibacterial agents.

Influence of the Duty Cycle of Pulse Electrodeposition-Coated Ni-Al2O3 Nanocomposites on Surface Roughness Properties.

In this study, the viability of duty cycle variation was explored as a potential method to improve the mechanical and surface roughness properties of Ni-Al2O3 nanocoatings through pulse electrodeposition. The areal and surface roughness properties of nanocomposite pulse electrodeposition-coated materials with varying duty cycles from 20% to 100% was studied with the analysis of bearing area curves and power spectral densities. Results demonstrate that with decrease in duty cycle, there was an enhancement in aerial roughness properties from 0.348 to 0.195 µm and surface roughness properties from 0.779 to 0.245 µm. The change in surface roughness was due to grain size variation, resulting from the varying time intervals during pulse coatings. This increase in grain size with the change in duty cycle was confirmed with the scanning electron microscope. In addition, an increase in grain size from 0.32 to 0.92 µm with an increase in duty cycle resulted in a decrease in nanohardness from 4.21 to 3.07 GPa. This work will provide a novel method for obtaining Ni-Al2O3 nanocomposite coatings with improved surface roughness and hardness properties for wider industrial applications.

Development of Nanocomposite Coatings.

This Special Issue in Nanomaterials, "Development of Nanocomposite Coatings", was set up with the aim to provide authors with an opportunity to showcase their latest developments in this field [...].

Development of mucoadhesive adapalene gel for biotherapeutic delivery to vaginal tissue.

Purpose: Alternate formulation strategies need to be devised for improving the absorption and bioavailability of drug molecules administered through the intravaginal route. Enhancing the coating of vaginal mucosa can aid the achievement of this goal. The aim of the current study is to develop a mucoadhesive formulation having adequate adhesiveness, spreading, and viscosity profiles that can ensure good tissue absorption of adapalene upon intravaginal application. Method: A combination of mucoadhesive agents has been employed, including Carbopol-934, HPMC K-15M, and xanthan gum, in varying ratios to formulate five different gels. Furthermore, a cost-effective UV-spectroscopic analytical method was developed to quantify the amount of adapalene in tested samples, both of in vitro and in vivo origin. The analytical method was validated for different parameters, including specificity, linearity, range, accuracy, precision, and ruggedness. The modified USP-II apparatus was used for dissolution studies, while in vivo pharmacokinetic validation was performed in a murine model. Result: Of all the tested formulations, on the basis of the rheo-mechanical attributes, ACX3 performed better than the rest, including the commercially available intravaginal reference product. ACX3 had an average adhesion time of 12 min and a spread diameter of 37 mm. It showed 35 mm as average distance travelled by the diluted sample for leakage assessment. The analytical method developed for the adapalene muco-adhesive gel was within the range for all the validation parameters. For further evaluating the performance of the formulation, dissolution studies were conducted in simulated vaginal conditions which showed 94.83% of drug release within 5 minutes, while on completion of 30 min, it was measured to be 92.90%. Moreover, approximately 67% of the administered drug was recovered after 5 min of administration as evaluated through tissue recovery procedures in mice. Conclusion: The study aided in development of a formulation which can enhance the muco-adhesion of the drug molecule, resulting in an improved pharmacokinetic profile. Moreover, it established an efficient assay method which can be employed for in vitro and in vivo quantification of adapalene in simulated and physiological fluids.

A Review of Friction Performance of Lubricants with Nano Additives.

It has been established in literature that the addition of nanoparticles to lubricants at an optimum concentration results in a lower coefficient of friction compared to lubricants with no nanoparticle additives. This review paper shows a comparison of different lubricants based on the COF (coefficient of friction) with nanoadditives. The effect of the addition of nanoparticles on the friction coefficient was analyzed for both synthetic and biolubricants separately. The limitations associated with the use of nanoparticles are explained. The mechanisms responsible for a reduction in friction when nanoparticles are used as an additive are also discussed. Various nanoparticles that have been most widely used in recent years showed good performance within lubricants, including CuO (copper oxide), MoS2 (molybdenum disulfide), and TiO2 (titanium dioxide). The paper also indicates some research gaps that need to be addressed.

CuO Bionanocomposite with Enhanced Stability and Antibacterial Activity against Extended-Spectrum Beta-Lactamase Strains.

Worldwide, bacterial resistance to beta-lactam antibiotics is the greatest challenge in public health care. To overcome the issue, metal-based nanoparticles were extensively used as an alternative to traditional antibiotics. However, their unstable nature limits their use. In the present study a very simple, environmentally friendly, one-pot synthesis method that avoids the use of organic solvents has been proposed to design stable, novel nanocomposites. Formulation was done by mixing biogenic copper oxide (CuO) nanomaterial with glycerol and phospholipids isolated from egg yolk in an appropriate ratio at optimum conditions. Characterization was done using dynamic light scattering DLS, Zeta potential, high performance liquid chromatography (HPLC), and transmission electron microscopy (TEM). Further, its antibacterial activity was evaluated against the extended-spectrum beta-lactamase strains based on zone of inhibition and minimal inhibitory concentration (MIC) indices. Results from this study have demonstrated the formulation of stable nanocomposites with a zeta potential of 34.9 mV. TEM results indicated clear dispersed particles with an average of 59.3 ± 5 nm size. Furthermore, HPLC analysis of the egg yolk extract exhibits the presence of phospholipids in the sample and has significance in terms of stability. The newly formed nanocomposite has momentous antibacterial activity with MIC 62.5 µg/mL. The results suggest that it could be a good candidate for drug delivery in terms of bactericidal therapeutic applications.

Isatin-hydrazide conjugates as potent α-amylase and α-glucosidase inhibitors: Synthesis, structure and invitro evaluations.

Managing diabetes that is a global life-threatening problem, remains a challenge for the scientific community. The inhibition of α-amylase and α-glucosidase enzymes which are responsible for the digestion of dietary carbohydrates is an effective strategy to control postprandial hyperglycemia. Herein, we report the novel and highly potent inhibitors of α-amylase and α-glucosidase, namely isatin-hydrazide conjugates 1a - 1j that are easily accessed in two steps from simple and inexpensive commercially available isatin. The in vitro bio-evaluations of these compounds revealed that conjugates 1a, 1h and 1f are highly potent inhibitors of α-amylase with IC50 values of 19.6, 12.1 and 18.3 µg/ml, respectively as compared to the standard, acarbose (IC50 = 36.2 µg/ml). Similarly, the conjugates 1a, 1b, 1d, 1f and 1i showed significant activity against α-glucosidase with IC50 values of 14.8, 25.6, 13.2, 14.5 and 16.5 µg/ml, respectively as compared to the acarbose (IC50 = 34.5 µg/ml). Notably, the compounds 1a and 1f were found to be highly potent against both α-amylase and α-glucosidase enzymes, demonstrating about two-fold better inhibitory activity than the reference inhibitor. Molecular docking studies were performed to recognize the possible binding modes of the compounds with the active pocket of the enzymes. The results of this study divulge the potential of these compounds as powerful and inexpensive lead molecules for future investigations.

Gynaecological morbidities among married women and husband's behaviour: Evidence from a community-based study.

AIM: To determine the association between gynaecological morbidities and IPV among married women specifically, with attention to the attitudes of the husband and the degree of satisfaction in a marital relationship. DESIGN: Cross-sectional study design. METHODS: Data were collected using face-to-face interviews with married women aged 15-49 years, living in selected communities. Information was collected on demographic characteristics, gynaecological morbidities and IPV using a self-developed tool. Descriptive and inferential statistics were used to analyse the data. RESULTS: Logistic Regression showed a significant association between physical violence and burning micturition, increased urinary frequency, constant dribbling of urine, genital ulcers, lower abdominal pain, vaginal discharge and painful coitus (OR: 1.41-1.84). A significant association between sexual and psychological abuse was also found with burning micturition (OR: 1.41) and dribbling of urine (OR: 0.12). Since gynaecological morbidities can have a serious effect on the psychological, physical well-being, and the social status of women in Pakistan; effective interventions are imperative in dealing with their symptoms and decreasing their emergence.

Electrochemical Comparison of SAN/PANI/FLG and ZnO/GO Coated Cast Iron Subject to Corrosive Environments.

ZnO/GO (Graphene Oxide) and SAN (Styrene Acrylonitrile)/PANI (Polyaniline)/FLG (Few Layers Graphene) nanocomposite coatings were produced by solution casting and sol-gel methods, respectively, to enhance corrosion resistance of ferrous based materials. Corrosive seawater and 'produced crude oil water' environments were selected as electrolytes for this study. Impedance and coating capacitance values obtained from Electrochemical Impedance Spectroscopy (EIS) Alternating Current (AC technique) showed enhanced corrosion resistance of nanocomposites coatings in the corrosive environments. Tafel scan Direct Current (DC technique) was used to find the corrosion rate of nanocomposite coating. SAN/PANI/FLG coating reduced the corrosion of bare metal up to 90% in seawater whereas ZnO/GO suppressed the corrosion up to 75% having the impedance value of 100 Ω. In produced water of crude oil, SAN/PANI/FLG reduced the corrosion up to 95% while ZnO/GO suppressed the corrosion up to 10%. Hybrid composites of SAN/PANI/FLG coatings have demonstrated better performances compared to ZnO/GO in the corrosive environments under investigation. This study provides fabrication of state-of-the-art novel anti corrosive nanocomposite coatings for a wide range of industrial applications. Reduced corrosion will result in increased service lifetime, durability and reliability of components and system and will in turn lead to significant cost savings.

Synthesis, characterization, anti-ulcer action and molecular docking evaluation of novel benzimidazole-pyrazole hybrids.

A series of six novel benzimidazole-pyrazole hybrid molecules was synthesized and characterized using elemental analysis (CHN) and spectroscopic methods (1HNMR, FT-IR). All the synthesized compounds were evaluated for their in vivo anti ulcerogenic activity using Albino rats (weighing 180-220 g). The interactions between the compounds and active site residues of H+/K+ ATPase were investigated by molecular docking studies using autodock vina 4.0. SCH28080 was used to validate the docking results. Also the drug likeliness of these compounds was predicted using Molinspiration server in light of Lipinski's rule of five. All the six synthesized compounds exhibited higher anti-ulcer activity as compared to omeprazole. These novel hybrid compounds showed comparable anti-ulcer potential of 72-83% at dose level of 500 µg/kg, whereas omeprazole showed 83% anti-ulcer activity at dose level of 30 mg/kg. The results clearly indicate that these novel benzimidazole-pyrazole hybrids can present a new class of potential anti ulcer agents and can serve as new anti-ulcer drugs after further investigation. Graphical abstract An overveiw of synthesis, in silico and in vivo antiulcer screening of benzimidazole pyrazole hybrids.

Analyzing and Modelling the Corrosion Behavior of Ni/Al2O3, Ni/SiC, Ni/ZrO2 and Ni/Graphene Nanocomposite Coatings.

A study has been presented on the effects of intrinsic mechanical parameters, such as surface stress, surface elastic modulus, surface porosity, permeability and grain size on the corrosion failure of nanocomposite coatings. A set of mechano-electrochemical equations was developed by combining the popular Butler-Volmer and Duhem expressions to analyze the direct influence of mechanical parameters on the electrochemical reactions in nanocomposite coatings. Nanocomposite coatings of Ni with Al2O3, SiC, ZrO2 and Graphene nanoparticles were studied as examples. The predictions showed that the corrosion rate of the nanocoatings increased with increasing grain size due to increase in surface stress, surface porosity and permeability of nanocoatings. A detailed experimental study was performed in which the nanocomposite coatings were subjected to an accelerated corrosion testing. The experimental results helped to develop and validate the equations by qualitative comparison between the experimental and predicted results showing good agreement between the two.