Comparative evaluation of canal transportation and canal centering ability in oval canals with newer nickel-titanium rotary single file systems - A cone-beam computed tomography study.

Context: The purpose of this study was to evaluate and compare the centering ability and canal transportation of TruNatomy, OneCurve, and Jizai file systems to assess their performance in oval-shaped canals using cone-beam computed tomography imaging. Materials and Methods: Forty-two fully formed single-rooted mandibular premolars were selected with a buccolingual canal size 2-2.5 times the mesiodistal size at 5 mm from the apex, with 0°-10° canal curvature with a 5-6 mm radius, at 5 mm from the apex. The teeth were divided into three groups (n = 14) and prepared with TruNatomy, OneCurve, and Jizai files based on the manufacturer's instructions. Cone-beam computed tomographic images were taken before and after instrumentation. The canal transportation and centering ability was calculated at 3, 6, and 9 mm from the apex in both mesiodistal and buccolingual directions. Statistical Analysis: Intergroup comparison was done using Kolmogorov-Smirnov test. Intragroup comparison was done using Freidman test. A comparison of categorical variables was done using the Chi-square test. Results: The results obtained did not present any statistically significant difference between the three groups, with TruNatomy and OneCurve showing relatively lesser canal transportation and better centering ratio when compared to the Jizai file system. Conclusions: It can, therefore, be concluded that all three systems used in the study are capable of safely preparing root canals with minimal errors.

A comparative evaluation of the effect of three different concentrations of in-office bleaching agents on microhardness and surface roughness of enamel - An in vitro study.

BACKGROUND: To evaluate the changes in the micro-hardness and surface roughness of enamel treated with three different concentrations of in-office bleaching agents. MATERIALS AND METHODS: In this in vitro study, 60 human incisors were divided into two groups (Group A and Group B). To obtain the baseline values, a Vickers tester was used to determine the surface microhardness in Group A, and a Surtronic tester was used for evaluation of surface roughness in Group B. Each group was then further subdivided into three subgroups and subjected to bleaching with Dash (Groups A1 and B1), Pola Office (Groups A2 and B2), and Opalescence Boost (Groups A3 and B3) containing 30%, 35%, and 40% hydrogen peroxide (HP), respectively. Samples were again subjected to testing to obtain the postbleaching values. Pre- and postbleaching data were analyzed by paired t-test. Intergroup comparison was carried out using one-way ANOVA (P ≤ 0.05). RESULTS: A significant decrease in microhardness values was observed following bleaching in all the three groups, with Group A1 showing maximum percentage decrease (2.58%), followed by Group A2 (1.23%) and Group A3 (0.73%). Furthermore, an increase in surface roughness was observed following bleaching, with Group B1 showing maximum percentage increase (14.80%), followed by Group B2 (8.25%) and Group B3 (5.79%). However, there was no significant difference in either microhardness or surface roughness when comparing the postbleaching values among the three bleaching agents. CONCLUSION: In-office bleaching agents may adversely affect the microhardness and roughness of enamel surface which are not related to the concentration of HP used.

Comparative evaluation of the effect of decontamination protocol on the shear bond strength of eighth generation bonding agent to contaminated dentin: an in vitro study.

INTRODUCTION: This in vitro study aims to evaluate and compare the effect of decontamination protocol - based on sodium hypochlorite - NaOCl, as a decontaminating agent, followed by the application of a collagen cross-linking agent like sodium ascorbate or Proanthocyanidin on the shear bond strength of eighth generation bonding agent to contaminated dentin (saliva, blood and blood followed by hemostatic agent). METHODS: The buccal surfaces of extracted premolars were flattened to expose the dentine. The teeth were then randomly divided into 3 groups based on the contaminant used (saliva, blood and blood followed by hemostatic agent). Decontamination protocol was carried out with sodium hypochlorite followed by application of either of the two collagen cross-linking agents (sodium ascorbate/proanthocyanidin) in each group. FuturaBond DC (eighth generation) bonding agent was used to bond composite to dentin surfaces which was subjected to shear bond strength testing. Data was analyzed by one-way ANOVA and Tukey test. RESULTS: All the groups (contaminated with saliva, blood, or hemostatic agent) showed a decrease in shear bond strength of composite resin to dentin. The shear bond strength of composite resin to dentin was least affected by contamination with saliva followed by contamination with blood and was most affected by contamination with a hemostatic agent.The decontamination protocol carried out showed that the combination of NaOCl and Proanthocyanidin improved the shear bond strength of composite to dentin significantly more than the combination of NaOCl and sodium ascorbate or of sodium hypochlorite used alone.

A comparative evaluation of fracture load of monolithic and bilayered zirconia crowns with and without a cervical collar: an in vitro study.

INTRODUCTION: The use of zirconia based all-ceramic restorations are preferred nowadays owing to superior biologic and esthetic properties. However, these restorations have also reported higher incidences of fracture and chipping. The clinical success may be enhanced by optimizing the core design, through the introduction of monolithic zirconia, or the layered crowns can be strengthened by adding the cervical collar to them. OBJECTIVE: This study was performed with the objective to compare and evaluate the fracture load of monolithic and bilayered zirconia crowns with and without a cervical collar. METHODS: A prospective observational study was carried out to compare 45 fabricated zirconia crowns of three different designs on a customized metal mould. The samples were oriented on the metal mould and subjected to confocal microscope for the evaluation of marginal integrity followed by cementing the crown on the metal mould and subjecting it to the universal testing machine for the analysis for the flexural strength. Data were analyzed using one way Anova and t- test for inter and intra groups. The significance level was set at P ≤ 0.05. RESULTS: The monolith zirconia crowns and layered zirconia crowns with cervical collar reported more flexural strength. CONCLUSION: The amount of force required to fracture the zirconia crowns was higher in the case of monolith zirconia crown and layered zirconia crown with cervical collar as compared to the layered zirconia crown without cervical collar.

Comparison of the incidence of postoperative pain after using a continuous rotary system, a reciprocating system, and a Self-Adjusting File system in single-visit endodontics: A prospective randomized clinical trial.

AIM: The aim of this study is to compare the incidence of postoperative pain using the ProTaper Next (PTN), WaveOne Gold (WOG), and Self-Adjusting File (SAF) systems. MATERIALS AND METHODS: Two hundred and fourteen patients with irreversible pulpitis were selected for single-visit endodontics. The teeth were blindly assigned to three groups based on the instrumentation system used: Group A (PTN), Group B (WOG), and Group C (SAF). Participants were asked to note the incidence of the pre- and postoperative pain on a visual analog scale at different time intervals. Paired t-test and one-way ANOVA were used along with post hoc Tukey's test. RESULTS: The greatest mean pain in Group A (PTN) and Group B (WOG) was found to be maximum in the first 24 h with a significant reduction in pain at the subsequent observation time points of 48 h, 72 h, and 7 days. Group C (SAF) showed minimum pain followed by Group B followed by Group A which showed comparatively higher pain scores even at the end of 7 days. CONCLUSIONS: In single-visit endodontics, SAF system may prove to be a better system compared with PTN and WOG as it produces minimal postoperative pain, thus improving the overall acceptance of endodontic treatment.

Effectiveness of Various Endodontic Irrigants on the Micro-Hardness of the Root Canal Dentin: An in vitro Study.

INTRODUCTION: Irrigating solutions used for the elimination of micro-organisms during root canal preparation may affect the chemical and the physical properties of dentin thereby rendering the tooth more susceptible to fracture. Therefore careful and judicious selection of irrigant is required which have maximum benefits with minimum undesirable properties. AIM: The aim of the present study was to evaluate the effect of various endodontic irrigants on the micro-hardness of the root canal dentin. MATERIALS AND METHODS: This in vitro study was carried out on eighty freshly extracted mandibular premolars with single canals. They were decoronated at the cemento-enamel junction. Roots were sectioned longitudinally into two halves. They were then polished and placed in autopolymerised resin moulds with the polished surface facing outside. The samples were divided into four groups based on the irrigants in which they were immersed i.e., 3% Sodium Hypochlorite (3% NaOCl), 17% Ethylene Dioxide Tetra Acetic Acid (17% EDTA), 0.2% Chitosan and 6% Morindacitrifolia Juice (MCJ) for 15 minutes each. All the specimens were then subjected to micro-hardness testing using a Vickers micro-hardness tester. Statistical analysis was done using one way Analysis of Variance (ANOVA), Post-Hoc Tukey test and Paired t-test to compare the pre and post immersion micro-hardness values of the selected samples. RESULTS: The results of the present study indicated that 17% EDTA and 0.2% Chitosan, significantly decreased the micro-hardness of root dentin whereas 6% MCJ and 3% NaOCl had no significant effect on the microhardness before and after immersing in the irrigants. CONCLUSION: A 6% MCJ and 3% NaOCl which have significant antibacterial, antifungal, anti-inflammatory and smear layer removing properties showed negligible effect on the micro-hardness of root canal dentin making them suitable endodontic irrigating solution.

Evaluation of Correlation between Salivary Calcium, Alkaline Phosphatase and Osteoporosis- A Prospective, Comparative and Observational Study.

INTRODUCTION: Fixed and/or removable prosthodontics caters to the restorative needs of the largest count of geriatric patients whose rehabilitative procedures depend on the quality and quantity of available bone. The common diagnostic parameters for quantifying bone may involve an invasive blood examination, an expensive bone densitometry procedure or a urine analysis. Sialometry involving the basic biochemistry of saliva analysis may be proposed as an alternative to the conventional investigative protocol and its usefulness may be attributed owing to its non invasive and simpler procedure. AIM: The aim of this study was to compare the salivary calcium and alkaline phosphatase among osteoporotic, osteopenic and normal edentulous subjects. MATERIALS AND METHODS: A prospective, comparative and observational study was carried out on 80 selected edentulous subjects (40 males and 40 females) aged 55-75 years (30 osteoporotic, 30 osteopenic and 20 control). A sample of saliva was taken for the study. Salivary calcium was measured by Arsenazo reaction; and alkaline phosphatase by the International Federation of Clinical Chemistry (IFCC) method. Statistical analysis was done by unpaired t-test. A comparison was made in the levels of salivary calcium and alkaline phosphatase with that of osteoporosis and osteopenia. RESULTS: The mean salivary calcium and alkaline phosphatase levels were found to be significantly higher in the osteoporotic and osteopenic edentulous subjects as compared to the control group. CONCLUSION: Salivary calcium and alkaline phosphatase are increased significantly in case of osteoporosis and osteopenia. Hence, screening of salivary samples of patients may be an effective indicator for the detection of underlying disorders of bone metabolism.

Perception of Acceptable Range of Smiles by Specialists, General Dentists and Lay Persons and Evaluation of Different Aesthetic Paradigms.

INTRODUCTION: One of the most important goals of restorative dentistry is to restore the patient's aesthetic. Smile analysis is subjective and it differs from person to person. An aesthetic smile involves a harmonious relationship between various parameters including the hard and soft tissues. AIM: The aim of the study was to identify the acceptable range of several smiles (alone and in conjunction with the face) by specialists, general dentists as well as lay persons; and to identify the values of different criteria i.e., the Golden Proportion (GP), the Recurrent Esthetic Dental proportion (RED), Width to Height ratio (W/H ratio), the Apparent Contact Dimension (ACD), and lateral incisor position in a smile. MATERIALS AND METHODS: Hundred photographs of 50 subjects were taken, 50 of the smile alone and 50 of the individual's frontal view of face. The photographs of the smiles and the faces were assessed for the aesthetic acceptability by 30 evaluators including 10 specialists with advanced training, 10 general dentists and 10 lay persons. Irreversible hydrocolloid impressions were made of the dentitions of all the individuals using stock trays and were poured in dental stone. Measurements were made on the facial surface of the teeth on the models and were recorded in millimeters using a sharp tipped digital vernier calliper. Data was analyzed to evaluate the presence of different parameters assessed in the smiles. Mean and standard deviation values for the percentage of only the agreeable smiles were calculated in both individual smile analysis and in conjunction with the face. The non agreeable smiles were excluded from further statistical analysis. Pearson Correlation Coefficient was calculated to compare the values obtained in all the three groups. RESULTS: More number of smiles were considered agreeable by the general dentists when compared to the specialists and the number even increased in case of evaluation by lay persons. Greater number of smiles was found to be agreeable when they were evaluated in conjunction with the face. CONCLUSION: Rather than assessment of individual numeric parameter that defines an ideal aesthetic smile, a smile to be aesthetic should harmonize with the composition of the face.

Evaluation of the incidence of microcracks caused by Mtwo and ProTaper Next rotary file systems versus the self-adjusting file: A scanning electron microscopic study.

INTRODUCTION: To evaluate the incidence of microcrack formation canal preparation with two rotary nickel-titanium systems Mtwo and ProTaper Next along with the self-adjusting file system. MATERIALS AND METHODS: One hundred and twenty mandibular premolar teeth were selected. Standardized access cavities were prepared and the canals were manually prepared up to size 20 after coronal preflaring. The teeth were divided into three experimental groups and one control group (n = 30). Group 1: The canals were prepared using Mtwo rotary files. Group 2: The canals were prepared with ProTaper Next files. Group 3: The canals were prepared with self-adjusting files. Group 4: The canals were unprepared and used as a control. The roots were sectioned horizontally 3, 6, and 9 mm from the apex and examined under a scanning electron microscope to check for the presence of microcracks. The Pearson's Chi-square test was applied. RESULTS: The highest incidence of microcracks were associated with the ProTaper Next group, 80% (P = 0.00), followed by the Mtwo group, 70% (P = 0.000), and the least number of microcracks was noted in the self-adjusting file group, 10% (P = 0.068). No significant difference was found between the ProTaper Next and Mtwo groups (P = 0.368) while a significant difference was observed between the ProTaper Next and self-adjusting file groups (P = 0.000) as well as the Mtwo and self-adjusting file groups (P = 0.000). CONCLUSION: All nickel-titanium rotary instrument systems were associated with microcracks. However, the self-adjusting file system had significantly fewer microcracks when compared with the Mtwo and ProTaper Next.

An in vitro evaluation of antimicrobial activity of five herbal extracts and comparison of their activity with 2.5% sodium hypochlorite against Enterococcus faecalis.

CONTEXT: Sodium hypochlorite is the most widely used irrigant in endodontic practice, but it has various disadvantages. Literature has shown that herbal products such as Propolis, Azadirachta indica (AI), Triphala, Curcuma longa, and Morinda citrifolia (MC) possess good antimicrobial properties and thus can be used as potential endodontic irrigants. AIM: To evaluate and compare the antimicrobial activity of five herbal extracts, i.e., Propolis, AI, Triphala, C. longa, and MC with that of 2.5% sodium hypochlorite against Enterococcus faecalis. MATERIALS AND METHODS: E. faecalis American Type Culture Collection 21292 was inoculated onto brain heart infusion agar plate. Discs impregnated with herbal medicaments were placed on the inoculated plates and incubated at 37°C aerobically for 24 h and growth inhibition zones were measured. STATISTICAL ANALYSIS: Mean zone of inhibition in descending order was found as sodium hypochlorite > Propolis > AI > Triphala > C. longa = MC > ethanol. Statistical analysis was performed using one-way analysis of variance which showed a significant difference in the zone of inhibition of sodium hypochlorite and Propolis (P < 0.001). RESULTS: Propolis showed highest zone of inhibition among all the herbal extracts next to sodium hypochlorite. CONCLUSION: Propolis and AI have significant antimicrobial activity against E. faecalis.