Electrochemical Sensing of Dopamine Using Polypyrrole/Molybdenum Oxide Bilayer-Modified ITO Electrode.

The electrochemical sensing of biomarkers has attracted more and more attention due to the advantages of electrochemical biosensors, including their ease of use, excellent accuracy, and small analyte volumes. Thus, the electrochemical sensing of biomarkers has a potential application in early disease diagnosis diagnosis. Dopamine neurotransmitters have a vital role in the transmission of nerve impulses. Here, the fabrication of a polypyrrole/molybdenum dioxide nanoparticle (MoO3 NP)-modified ITO electrode based on a hydrothermal technique followed by electrochemical polymerization is reported. Several techniques were used to investigate the developed electrode's structure, morphology, and physical characteristics, including SEM, FTIR, EDX, N2 adsorption, and Raman spectroscopy. The results imply the formation of tiny MoO3 NPs with an average diameter of 29.01 nm. The developed electrode was used to determine low concentrations of dopamine neurotransmitters based on cyclic voltammetry and square wave voltammetry techniques. Furthermore, the developed electrode was used for monitoring dopamine in a human serum sample. The LOD for detecting dopamine by using MoO3 NPs/ITO electrodes based on the SWV technique was around 2.2 nmol L-1.

A photoluminescence sensor for in-situ monitoring of the dopamine neurotransmitters released from PC12 cells.

Constructing simple, stable, fast, and sensitive neurotransmitter-based sensors is a promising tool to diagnose neurological diseases. Dopamine (DA), "a catecholamine neurotransmitter" is important in transmitting nerve impulses. Therefore, great attention is taken to monitor DA concentrations received. The challenge in developing a DA-based sensor is to enhance its stability and sensitivity. Thus, we have used o-phthalaldehyde (OPA)/2-mercapto ethanol (2ME)/mesoporous silica instated of 2ME in solution. Here we have successfully developed a fluorescence DA neurotransmitters sensor. The sensor was used for detecting a wide range of concentrations of DA (5 nM to 5 µM). Effects of pH (4.3-11.4) and temperatures (25-70 °C) on the sensor efficiency were investigated. The detection limit was 1.35 × 10-11 mol/dm3, which is lower than the normal DA level in the central nervous system. The results indicated that using OPA/2ME/MSNPs has long-time stability over a year of its preparation. Moreover, the developed sensor showed high specificity towards DA in the presence of different interferences such as ascorbic acid or another catecholamine neurotransmitter such as γ-aminobutyric acid. Finally, the fabricated biosensor was used to monitor the DA neurotransmitter released from PC12 cells. Hence, it was successfully developed a simple and stable probe for accurate photoluminescence detection of DA neurotransmitters.

Cobalt doped titania-carbon nanosheets with induced oxygen vacancies for photocatalytic degradation of uranium complexes in radioactive wastes.

The photocatalytic degradation of uranium complexes is considered among the most efficient techniques for the efficient removal of uranium ions/complexes from radioactive wastewater. Described here is a nanostructured photocatalyst based on a cobalt-doped TiO2 composite with induced oxygen vacancies (Co@TiO2-C) for the photocatalytic removal of uranium complexes from contaminated water. The synergy between oxygen vacancies and Co-doping produced a material with a 1.7 eV bandgap, while the carbon network facilitates electron movement and hinders the e-h recombination. As a result, the new photocatalyst enables the decomposition of uranium-arsenazo iii complexes (U-ARZ3), followed by photocatalytic reduction of hexavalent uranium to insoluble tetravalent uranium. Combined with the nanosheet structure's high surface area, the photocatalytic decomposition, reduction efficiency, and kinetics were significantly enhanced, achieving almost complete U(vi) removal in less than 20 minutes from solution with a concentration as high as 1000 mL g-1. Moreover, the designed photocatalyst exhibits excellent stability and reusability without decreasing the photocatalytic performance after 5 cycles.

Hydrothermal synthesis of Mn3O4 nanorods modified indium tin oxide electrode as an efficient nanocatalyst towards direct urea electrooxidation.

Control fabrication of metal-oxide nanocatalysts for electrochemical reactions has received considerable research attention. Here, manganese oxide (Mn3O4) nanorods modified indium tin oxide (ITO) electrodes were prepared based on the in-situ one-step hydrothermal methods. The nanorods were well characterized using field emission scanning electron microscopy, Fourier transform infrared, and X-ray diffraction spectroscopy. The results showed the formation of pure crystalline Mn3O4 nanorods with a length of approximately 1.4 µm and a thickness of approximately 100 ± 30 nm. The Mn3O4 nanorod-modified ITO electrodes were used for accelerating urea electrochemical oxidation at room temperature using cyclic and square wave voltammetry techniques. The results indicated that the modified electrode demonstrated excellent electrocatalytic performance toward urea electrooxidation in an alkaline medium over concentrations ranging from 0.2 to 4 mol/L. The modified electrode showed high durability, attaining more than 88% of its baseline performance after 150 cycles; furthermore, the chronoamperometry technique demonstrated high stability. Thus, the Mn3O4 nanorod-modified ITO electrode is a promising anode for direct urea fuel cell applications.

Design and synthesis of a combined meso-adsorbent/chemo-sensor for extraction and detection of silver ions.

We synthesized a new pH-dependent meso-captor/sensor for the visual monitoring and selective sequestering of Ag(I) ions from wastewater. The SBA-16 microspheres were successfully synthesized via a direct hydrothermal treatment through surfactant-assisted cooperative self-assembly. The meso-captor/sensor was designed via the direct immobilization of the chromogenic Acid Blue 90 (AB90) chelate into cubical large, open mesoporous SBA-16 carriers and investigate of its ability to detect and retain silver ions from aqueous solutions. Results show that the synthesized SBA-16 microspheres were retained after modification and the AB90 functional groups were immobilized hierarchically inside the mesopore channels. This was evidenced by the N2 adsorption, X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR), Scanning Electron Microscope (SEM), High-Resolution Transmission Electron Microscope (HR-TEM), and elemental analyses. Batch adsorption experiments were carried out and the effects of various parameters on Ag(I) ions removal and detection were determined. The optimum adsorption/detection of Ag(I) ions were recorded at a pH of 6.2 within 30 min with color change from a brilliant blue to a pale blue-gray. The spectral response for [SBA-16@AB90 â†’ Ag(I)] complex showed a maximum reflectance at λmax = 385 nm within 2.5 min response time (tR); the LOD was close to 3.87 µg/L while the LOQ approached 12.83 µg/L, this was attributed to the concentration range at which a linear signal has been observed against Ag(I) analyte concentration (i.e., 5 to 1000 µg/L) at pH 6.2 with standard deviation (SD) of 0.077 (RSD% = 9.5 at n = 8).

Fabrication of Hollow Nanocones Membrane with an Extraordinary Surface Area as CO2 Sucker.

Recently, more and more attention has been paid to the development of eco-friendly solid sorbents that are cost-effective, noncorrosive, have a high gas capacity, and have low renewable energy for CO2 capture. Here, we claimed the fabrication of a three-dimensional (3D) film of hollow nanocones with a large surface area (949.5 m2/g), a large contact angle of 136.3°, and high surface energy. The synthetic technique is based on an electrochemical polymerization process followed by a novel and simple strategy for pulling off the formed layers as a membrane. Although the polymer-coated substrates were reported previously, the membrane formation has not been reported elsewhere. The detachable capability of the manufactured layer as a membrane braked the previous boundaries and allows the membrane's uses in a wide range of applications. This 3D hollow nanocones membrane offer advantages over conventional ones in that they combine a π-electron-rich (aromatic ring), hydrophobicity, a large surface area, multiple amino groups, and a large pore volume. These substantial features are vital for CO2 capturing and storage. Furthermore, the hydrophobicity characteristic and application of the formed polymer as a CO2 sucker were investigated. These results demonstrated the potential of the synthesized 3D hollow polymer to be used for CO2 capturing with a gas capacity of about 68 mg/g and regeneration ability without the need for heat up.

Synthesis of gold nanoparticles@reduced porous graphene-modified ITO electrode for spectroelectrochemical detection of SARS-CoV-2 spike protein.

Here, we reported the synthesis of reduced porous graphene oxide (rPGO) decorated with gold nanoparticles (Au NPs) to modify the ITO electrode. Then we used this highly uniform Au NPs@rPGO modified ITO electrode as a surface-enhanced Raman spectroscopy-active surface and a working electrode. The uses of the Au nanoparticles and porous graphene enhance the Raman signals and the electrochemical conductivity. COVID-19 protein-based biosensor was developed based on immobilization of anti-COVID-19 antibodies onto the modified electrode and its uses as a probe for capturing the COVID-19 protein. The developed biosensor showed the capability of monitoring the COVID-19 protein within a concentration range from 100 nmol/L to 1 pmol/L with a limit of detection (LOD) of 75 fmol/L. Furthermore, COVID-19 protein was detected based on electrochemical techniques within a concentration range from 100 nmol/L to 500 fmol/L that showed a LOD of 39.5 fmol/L. Finally, three concentrations of COVID-19 protein spiked in human serum were investigated. Thus, the present sensor showed high efficiency towards the detection of COVID-19.

A stable naked-eye colorimetric sensor for monitoring release of extracellular gamma-aminobutyric acid (GABA) neurotransmitter from SH-SY5Y cells.

A novel optical γ-aminobutyric acid (GABA)-based sensor was developed on interacting thiol compounds and o-phthalaldehyde (OPA) to form thiacetal compounds. Then, the thiacetal interacts with the GABA molecule to form an isoindole compound. The effects of four thiol compounds on the stability of the resulting isoindole compound were assessed. The 2-mercaptoethanol, "one of the most used derivatizing agents," is unexpectedly the least stable; while, 16-mercaptohexadecanoic acid resulted in the most durable isoindole compound. The developed sensor showed the capability for detecting GABA within a wide concentration range spanning from 500 nmol L-1 to 100 µmol L-1. The detection limit was about 330 nmol L-1, which indicated the high sensitivity of the developed sensor compared with those previously reported. The findings illustrated the ability to detect GABA at the physiological pH (pH = 7.4) without adjusting the pH value, opening the door for real applications. Furthermore, the sensor could detect various GABA concentrations in human serum with good recovery percentages (98% to 101.4%). In addition, this assay was applied to monitor GABA release from the SH-SY5Y cell line to convert glutamate into GABA. This result indicates the capability of the proposed assay for visually monitoring the release of GABA neurotransmitters.

Management and outcome of pediatric brainstem and cerebellar peduncular low-grade gliomas: a retrospective analysis of 62 cases.

PURPOSE: This study was designed to present our experience and recommendations regarding the management of pediatric brainstem and peduncular low-grade gliomas (LGGs). METHODS: Retrospective analysis was performed for pathologically proven brainstem or cerebellar peduncular LGGs in patients admitted between 2014 and 2019. These lesions were classified into the dorsal exophytic, focal brainstem, cervicomedullary, lower peduncular, and upper peduncular groups, and this classification was the basis for the surgical approach for the lesions. RESULTS: Sixty-two pediatric patients were included, and their distribution among the aforementioned groups were as follows: 12, 12, 3, 16, and 19 cases in the dorsal exophytic, focal brainstem, cervicomedullary, upper peduncular, and lower peduncular groups, respectively. Stereotactic biopsy was performed for all cases in the focal brainstem group, whereas other groups underwent open excision. Gross total resection (GTR) was achieved in 20 cases (40%), near-total resection (NTR) was achieved in 17 cases (34%), and subtotal resection (STR) was achieved in 13 cases (26%). The extent of GTR and NTR for the upper peduncular, lower peduncular, dorsal exophytic, and cervicomedullary groups were 81.2%, 68.4%,75%, and 66.6%, respectively. Then, 32 cases received chemotherapy. The 3- and 5-year progression-free survival rates were 95% (95% confidence interval (CI) 89.5-100%) and 90.3% (95% CI 79.9-100%), respectively. A significant difference in the 3-year progression-free survival rate was observed between the GTR and NTR groups (p = 0.06; 100% vs. 88.2% (95% CI 72.9-100%)). CONCLUSION: Surgery plays a definitive curative role in grossly resected cases. Additionally, the role of surgical debulking should be considered, even if GTR is impossible. Meanwhile, chemotherapy showed a beneficial role in patients with focal brainstem lesions and progressive lesions, those with STR, and some patients with NTR.

Cubically cage-shaped mesoporous ordered silica for simultaneous visual detection and removal of uranium ions from contaminated seawater.

A dual-function organic-inorganic mesoporous structure is reported for naked-eye detection and removal of uranyl ions from an aqueous environment. The mesoporous sensor/adsorbent is fabricated via direct template synthesis of highly ordered silica monolith (HOM) starting from a quaternary microemulsion liquid crystalline phase. The produced HOM is subjected to further modifications through growing an organic probe, omega chrome black blue G (OCBBG), in the cavities and on the outer surface of the silica structure. The spectral response for [HOM-OCBBG → U(VI)] complex shows a maximum reflectance at λmax = 548 nm within 1 min response time (tR); the LOD is close to 9.1 µg/L while the LOQ approaches 30.4 µg/L, and this corresponds to the range of concentration where the signal is linear against U(VI) concentration (i.e., 5-1000 µg/L) at pH 3.4 with standard deviation (SD) of 0.079 (RSD% = 11.7 at n = 10). Experiments and DFT calculations indicate the existence of strong binding energy between the organic probe and uranyl ions forming a complex with blue color that can be detected by naked eyes even at low uranium concentrations. With regard to the radioactive remediation, the new mesoporous sensor/captor is able to reach a maximum capacity of 95 mg/g within a few minutes of the sorption process. The synthesized material can be regenerated using simple leaching and re-used several times without a significant decrease in capacity.

Acceptability of "High sn-2" Infant Formula in Non-Breast Fed Healthy Term Infants Regarding Gastrointestinal Tolerability by Both Parents and Pediatrician: An Open-Label Pilot Study in the Gulf Cooperation Council (GCC) Countries.

Recent studies have highlighted the positive impact of high sn-2 formulas on gastrointestinal (GI) tolerance. We assessed the GI tolerance, acceptability, and safety of high sn-2 infant formula among non-breastfed healthy term infants in the Gulf countries. A multicenter observational study was conducted on 227 healthy-term infants who were prescribed high sn-2 palmitate infant formula and received a minimum of two formula feedings per day for the past two weeks prior to the study's initiation. The number of stools per day decreased significantly from a median of four (interquartile range [IQR] = 4) at baseline to 3.0 (2) stools per day at the end of follow-up (p = 0.015). The percentage of stool amount changed significantly, where 61.2% and 33.7% of the infants had an amount of 25-50% of the diaper and >50% of the diaper, respectively (p < 0.001) at the end of the follow-up. Similarly, the percentage of hard stool decreased significantly from 17.4% at baseline to 0.4% of the population at week 12 (p < 0.00). The prevalence of colic and abdominal distention declined from 21.4% and 39.9% at baseline to 2.9% and 9.4% at week 12, respectively (p < 0.05). The same decline was observed in abdominal distension and regurgitation score (p < 0.05).

KOH-Activated Hollow ZIF-8 Derived Porous Carbon: Nanoarchitectured Control for Upgraded Capacitive Deionization and Supercapacitor.

Herein, the synergistic effects of hollow nanoarchitecture and high specific surface area of hollow activated carbons (HACs) are reported with the superior supercapacitor (SC) and capacitive deionization (CDI) performance. The center of zeolite imidazolate framework-8 (ZIF-8) is selectively etched to create a hollow cavity as a macropore, and the resulting hollow ZIF-8 (HZIF-8) is carbonized to obtain hollow carbon (HC). The distribution of nanopores is, subsequently, optimized by KOH activation to create more nanopores and significantly increase specific surface area. Indeed, as-prepared hollow activated carbons (HACs) show significant improvement not only in the maximum specific capacitance and desalination capacity but also capacitance retention and mean desalination rates in SC and CDI, respectively. As a result, it is confirmed that well-designed nanoarchitecture and porosity are required to allow efficient diffusion and maximum electrosorption of electrolyte ions.

Electrochemical Microbiosensor for Detecting COVID-19 in a Patient Sample Based on Gold Microcuboids Pattern.

As continues increasing the COVID-19 infections, there is an urgent need for developing fast, simple, selective, and accurate COVID-19 biosensors. A highly uniform gold (Au) microcuboid pattern was used as a microelectrode that allowed monitoring a small analyte. The electrochemical biosensor was used to monitor the COVID-19 S protein within a concentration range from 100 to 5 pmol L-1; it showed a lower detection limit of 276 fmol L-1. Finally, the developed COVID-19 sensor was used to detect a positive sample from a human patient obtained through a nasal swab; the results were confirmed using the PCR technique. The results showed that the SWV technique showed high sensitivity towards detecting COVID-19 and good efficiency for detecting COVID-19 in a positive human sample.

Electrochemical Cell Chips Based on Functionalized Nanometals.

The electrochemical technique is one of the most accurate, rapid, and sensitive analytical assays, which becomes promising techniques for biological assays at a single-cell scale. Nanometals have been widely used for modification of the traditional electrodes to develop highly sensitive electrochemical cell chips. The electrochemical cell chips based on the nanostructured surface have been used as label-free, simple, and non-destructive techniques for in vitro monitoring of the effects of different anticancer drugs at the cellular level. Here, we will provide the recent progress in fabrication of nanopatterned surface and cell-based nanoarray, and discuss their applications based on electrochemical techniques such as detection of cellular states and chemicals, and non-destructive monitoring of stem cell differentiation.

Colorimetric aflatoxins immunoassay by using silica nanoparticles decorated with gold nanoparticles.

Nanomaterials-based colorimetric immunoassays showed increasing attention for monitoring different biomarkers because of their unique optical and electrical features. Here, a highly sensitive and selective optical sensor was described for the determination of different aflatoxins (AFs). Mesoporous silica nanoparticles (m-SNPs) with an average particle size of 40 nm were prepared by the sol-gel method and then decorated with gold nanoparticles (AuNPs). The Au NPs@m-SiNPs nanocomposite with an average particle size of 66 nm was modified with AFs antibodies. The assay includes the following steps: the Au NPs@m-SiNPs nanocomposite was immersed with AFs antibodies, and then the AFs-Ab/Au NPs@m-SiNPs was used as a probe for AFs detection. The interaction between the AFs-Ab/Au NPs@m-SiNPs and the AFs has resulted in a change in its color from pink to violet. Measurements are performed by absorptiometry at a wavelength of 425 nm. The immunoassay works in the concentration range from 1 ng·mL-1 to 75 ng·mL-1 AFB1 and has a limit of detection 0.16 ng·mL-1 (at S/N = 3). The assay was applied to the determination of AFs in different food samples spiked with AFS. Finally, the assay was used to detect AFs in a real sample, and the LC-MS technique was used to verify the results.

In Situ Detection of Neurotransmitters from Stem Cell-Derived Neural Interface at the Single-Cell Level via Graphene-Hybrid SERS Nanobiosensing.

In situ quantitative measurements of neurotransmitter activities can provide useful insights into the underlying mechanisms of stem cell differentiation, the formation of neuronal networks, and neurodegenerative diseases. Currently, neurotransmitter detection methods suffer from poor spatial resolution, nonspecific detection, and a lack of in situ analysis. To address this challenge, herein, we first developed a graphene oxide (GO)-hybrid nanosurface-enhanced Raman scattering (SERS) array to detect dopamine (DA) in a selective and sensitive manner. Using the GO-hybrid nano-SERS array, we successfully measured a wide range of DA concentrations (10-4 to 10-9 M) rapidly and reliably. Moreover, the measurement of DA from differentiating neural stem cells applies to the characterization of neuronal differentiation. Given the challenges of in situ detection of neurotransmitters at the single-cell level, our developed SERS-based detection method can represent a unique tool for investigating single-cell signaling pathways associated with DA, or other neurotransmitters, and their roles in neurological processes.

Nanoporous colorant sensors and captors for simultaneous recognition and recovery of gold from E-wastes.

Platinum group metals have gained significant interest due to their unique characteristics, which make them the main constituents in advanced applications. In this work, we introduce new pH-dependent optical mesocaptors for the colorimetric monitoring and separation of Au(III) from E-waste leach liquors without a preconcentration process. The mesoporous silica nanospheres are fabricated via simple, reproducible, and low-cost procedures. The optical mesocaptor is designed via indirect immobilization of thiazole yellow G (TYG) and amacid yellow M (AYM) chromogenic probes onto mesoporous nanostructured scaffolds. The silanol groups in the mesopores of silica surface robustly anchored dilauryl dimethyl ammonium bromide (DDAB) linker to induce the interactions with the TYG and AYM chelates, thereby leading to the fashioning of a stable optical mesocaptors without releasing of the chelates throughout adsorption and sensing assays. The finding provides evidence of the capability of the synthesized decorated new nanostructured sensor shows excellent sensitivity toward Au(III) with a limit of detection (LOD) as low as 1.16 µg L-1. Furthermore, the new sensors were able to selectively detect Au(III) in solution with multi ions components.

Nanosheet composed of gold nanoparticle/graphene/epoxy resin based on ultrasonic fabrication for flexible dopamine biosensor using surface-enhanced Raman spectroscopy.

Construction of a fast, easy and sensitive neurotransmitters-based sensor could provide a promising way for the diagnosis of neurological diseases, leading to the discovery of more effective treatment methods. The current work is directed to develop for the first time a flexible Surface-Enhanced Raman Spectroscopy (SERS) based neurotransmitters sensor by using the ultrasonic-assisted fabrication of a new set of epoxy resin (EPR) nanocomposites based on graphene nanosheets (GNS) using the casting technique. The perspicuous epoxy resin was reinforced by the variable loading of GNS giving the general formula GNS/EPR1-5. The designed products have been fabricated in situ while the perspicuous epoxy resin was formed. The expected nanocomposites have been fabricated using 3%, 5%, 10%, 15% and 20% GNS loading was applied for such fabrication process. The chemical, physical and morphological properties of the prepared nanocomposites were investigated by using Fourier transforms infrared spectroscopy, X-ray diffraction, Thermogravimetric analysis, Differential Thermal gravimetry, and field emission scanning electron microscopy methods. The GNS/EPR1-5 nanocomposites were decorated with a layer of gold nanoparticles (Au NPs/GNS/EPR) to create surface-enhanced Raman scattering hot points. The wettability of the Au NPs/GNS/EPR was investigated in comparison with the different nanocomposites and the bare epoxy. Au NPs/GNS/EPR was used as a SERS-active surface for detecting different concentrations of dopamine with a limit of detection of 3.3 µM. Our sensor showed the capability to detect low concentrations of dopamine either in a buffer system or in human serum as a real sample.