Near-infrared imaging for automated tsetse pupae sex sorting in support of the sterile insect technique.

Tsetse flies are the cyclical vectors of African trypanosomes and one of several methods to manage this vector is the sterile insect technique (SIT). The ability to determine the sex of tsetse pupae with the objective to separate the sexes before adult emergence has been a major goal for decades for tsetse management programmes with an SIT component. Tsetse females develop faster and pharate females inside the pupae melanise 1-2 days before males. This earlier melanisation can be detected by infrared cameras through the pupal shell, and the newly developed Near InfraRed Pupae Sex Sorter (NIRPSS) takes advantage of this. The melanisation process is not homogeneous for all fly organs and the pupa needs to be examined ventrally, dorsally and laterally to ensure accurate classification by an image analysis algorithm. When the pupae are maturing at a constant temperature of 24 °C and sorted at the appropriate age, 24 days post-larviposition for Glossina palpalis gambiensis, the sorting machine can efficiently separate the sexes. The recovered male pupae can then be sterilised for field releases of males, while the rest of the pupae can be used to maintain the laboratory colony. The sorting process with the new NIRPSS had no negative impact on adult emergence and flight ability. A mean male recovery of 62.82 ± 3.61% was enough to provide sterile males to an operational SIT programme, while mean contamination with females (4.69 ± 3.02%) was low enough to have no impact on the maintenance of a laboratory colony.

Title: Imagerie dans l'infrarouge proche pour le tri automatisé du sexe des pupes de glossines comme aide à la technique de l'insecte stérile. Abstract: Les glossines sont les vecteurs cycliques des trypanosomes africains et la technique de l'insecte stérile (TIS) est l'une des méthodes de gestion de ce vecteur. La capacité à déterminer le sexe des pupes de glossines dans le but de séparer les sexes avant l'émergence des adultes a été un objectif majeur, pendant des décennies, pour les programmes de lutte contre les glossines avec une composante TIS. Les femelles tsé-tsé se développent plus rapidement et les pharates femelles à l'intérieur des pupes se mélanisent 1 à 2 jours avant les mâles. Cette mélanisation précoce peut être détectée par des caméras infrarouges à travers la coque de la pupe, ce que le nouveau trieur de sexe des pupes dans le proche infrarouge (TSPPIR) utilise. Le processus de mélanisation n'est pas homogène pour tous les organes de la mouche et la pupe doit être examinée ventralement, dorsalement et latéralement pour assurer une classification précise par un algorithme d'analyse d'image. Lorsque les pupes mûrissent à une température constante de 24 °C et sont triées à l'âge approprié, 24 jours après la larviposition pour Glossina palpalis gambiensis, la machine de tri peut séparer efficacement les sexes. Les pupes mâles récupérées peuvent ensuite être stérilisées pour les lâchers de mâles sur le terrain tandis que le reste des pupes peut être utilisé pour maintenir la colonie de laboratoire. Le processus de tri avec le nouveau TSPPIR n'a eu aucun impact négatif sur l'émergence et la capacité de vol des adultes. Une récupération moyenne des mâles de 62,82 ± 3,61% était suffisante pour fournir des mâles stériles à un programme TIS opérationnel, tandis que la contamination moyenne par les femelles (4,69 ± 3,02%) était suffisamment faible pour n'avoir aucun impact sur le maintien d'une colonie de laboratoire.

Standardization of the FAO/IAEA Flight Test for Quality Control of Sterile Mosquitoes.

Successful implementation of the sterile insect technique (SIT) against Aedes aegypti and Aedes albopictus relies on maintaining a consistent release of high-quality sterile males. Affordable, rapid, practical quality control tools based on the male's flight ability (ability to escape from a flight device) may contribute to meeting this requirement. Therefore, this study aims to standardize the use of the original FAO/IAEA rapid quality control flight test device (FTD) (version 1.0), while improving handling conditions and reducing the device's overall cost by assessing factors that could impact the subsequent flight ability of Aedes mosquitoes. The new FTD (version 1.1) is easier to use. The most important factors affecting escape rates were found to be tube color (or "shade"), the combined use of a lure and fan, mosquito species, and mosquito age and density (25; 50; 75; 100 males). Other factors measured but found to be less important were the duration of the test (30, 60, 90, 120 min), fan speed (normal 3000 rpm vs. high 6000 rpm), and mosquito strain origin. In addition, a cheaper version of the FTD (version 2.0) that holds eight individual tubes instead of 40 was designed and successfully validated against the new FTD (version 1.1). It was sensitive enough to distinguish between the effects of cold stress and high irradiation dose. Therefore, the eight-tube FTD may be used to assess Aedes' flight ability. This study demonstrated that the new designs (versions 1.1 and 2.0) of the FTD could be used for standard routine quality assessments of Aedes mosquitoes required for an SIT and other male release-based programs.

All-in-One Mosquito Containers: From the Laboratory to the Release Sites.

Integrated vector control programs that use a Sterile Insect Technique approach require the production and release of large numbers of high quality, sterile male insects. In pilot projects conducted worldwide, sterile males are usually kept in containers at low densities until their manual release on the ground. Although the quality of the released insects is high, these containers are only suitable for small-scale projects, given the fact that the manual labor required for release is significant and therefore untenable in large-scale projects. This study will compare and contrast the quality of the males reared in the proposed "all-in-one" containers which considerably reduce both the handling of the insects and the manual labor required for release. As a result, project costs are lower. The design of these "all-in-one" containers incorporates two important features: ventilation and the density of the vertical resting surface. Having evaluated both features, it can be concluded that ventilation does not directly affect the quality of the insects, at least in the range of dimensions tested. However, the quality of the male insects is reduced in relation to an increase in the number of mosquitoes, with 500 being the optimum quantity of mosquitoes per "all-in-one" container.

Genetic sexing strains for the population suppression of the mosquito vector Aedes aegypti.

Aedes aegypti is the primary vector of arthropod-borne viruses including dengue, chikungunya and Zika. Vector population control methods are reviving to impede disease transmission. An efficient sex separation for male-only releases is crucial for area-wide mosquito population suppression strategies. Here, we report on the construction of two genetic sexing strains using red- and white-eye colour mutations as selectable markers. Quality control analysis showed that the Red-eye genetic sexing strains (GSS) is better and more genetically stable than the White-eye GSS. The introduction of an irradiation-induced inversion (Inv35) increases genetic stability and reduces the probability of female contamination of the male release batches. Bi-weekly releases of irradiated males of both the Red-eye GSS and the Red-eye GSS/Inv35 fully suppressed target laboratory cage populations within six and nine weeks, respectively. An image analysis algorithm allowing sex determination based on eye colour identification at the pupal stage was developed. The next step is to automate the Red-eye-based genetic sexing and validate it in pilot trials prior to its integration in large-scale population suppression programmes. This article is part of the theme issue 'Novel control strategies for mosquito-borne diseases'.

Assessment of a Novel Adult Mass-Rearing Cage for Aedes albopictus (Skuse) and Anopheles arabiensis (Patton).

Successful implementation of the sterile insect technique (SIT) against Aedes albopictus and Anopheles arabiensis relies on a continuous supply of sterile males. To meet this requirement, optimization of the mass-rearing techniques is needed. This study, therefore, aims to assess a new mass-rearing cage (MRC) in terms of egg production efficiency and egg hatch rate (quality). In addition, adult survival was evaluated based on a cage adult-index for Ae. albopictus. Moreover, the cage's suitability for use in mass An. arabiensis egg production was compared to that of the FAO/IAEA Anopheles reference cage. In Ae. albopictus rearing, the new MRC produced 1,112,110 eggs per cage following six blood meals, with minimum loss of eggs in the egging water. Furthermore, the adult index gave a good proxy of daily mortality rates in Ae. albopictus. In An. arabiensis rearing, about 130,000 eggs per egg batch were collected both from the new and the reference MRC. These findings suggest that the new MRC prototype is efficient in terms of egg production and can be used for mass-rearing in SIT programs targeting Ae. albopictus as well as An. arabiensis. The adult index was also positively validated for the detection of unusual mortality rates in Ae. albopictus mass-rearing facilities. Overall, the new MRC has shown several advantages; however, further improvements are necessary to minimize escapes during the egg collection processes.

Exploring the potential of computer vision analysis of pupae size dimorphism for adaptive sex sorting systems of various vector mosquito species.

BACKGROUND: Several mosquito population suppression strategies based on the rearing and release of sterile males have provided promising results. However, the lack of an efficient male selection method has hampered the expansion of these approaches into large-scale operational programmes. Currently, most of these programmes targeting Aedes mosquitoes rely on sorting methods based on the sexual size dimorphism (SSD) at the pupal stage. The currently available sorting methods have not been developed based on biometric analysis, and there is therefore potential for improvement. We applied an automated pupal size estimator developed by Grupo Tragsa with laboratory samples of Anopheles arabiensis, Aedes albopictus, Ae. polynesiensis, and three strains of Ae. aegypti. The frequency distribution of the pupal size was analyzed. We propose a general model for the analysis of the frequency distribution of mosquito pupae in the context of SSD-sorting methods, which is based on a Gaussian mixture distribution functions, thus making possible the analysis of performance (% males recovery) and purity (% males on the sorted sample). RESULTS: For the three Aedes species, the distribution of the pupae size can be modeled by a mixture of two Gaussian distribution functions and the proposed model fitted the experimental data. For a given population, each size threshold is linked to a specific outcome of male recovery. Two dimensionless parameters that measure the suitability for SSD-based sorting of a specific batch of pupae are provided. The optimal sorting results are predicted for the highest values of SSD and lowest values of intra-batch variance. Rearing conditions have a strong influence in the performance of the SSD-sorting methods and non-standard rearing can lead to increase pupae size heterogeneity. CONCLUSIONS: Sex sorting of pupae based on size dimorphism can be achieved with a high performance (% males recovery) and a reasonably high purity (% males on the sorted sample) for the different Aedes species and strains. The purity and performance of a sex sorting operation in the tested Aedes species are linked parameters whose relation can be modeled. The conclusions of this analysis are applicable to all the existing SSD-sorting methods. The efficiency of the SSD-sorting methods can be improved by reducing the heterogeneity of pupae size within rearing containers. The heterogeneity between batches does not strongly affect the quality of the sex sorting, as long as a specific separation threshold is not pre-set before the sorting process. For new developments, we recommend using adaptive and precise threshold selection methods applied individually to each batch or to a mix of batches. Adaptive and precise thresholds will allow the sex-sorting of mixed batches in operational conditions maintaining the target purity at the cost of a reduction in performance. We also recommend a strategy whereby an acceptable level of purity is pre-selected and remains constant across the different batches of pupae while the performance varies from batch to batch to fit with the desired purity.