Low Fouling Polyelectrolyte Layer-by-Layer Self-Assembled Membrane for High Performance Dye/Salt Fractionation: Sequence Effect of Self-Assembly.

Layer-by-layer (LbL) self-assembly of oppositely charged polyelectrolytes (PEs) is usually performed on a conventional ultrafiltration base substrate (negative zeta potential) by depositing a cationic PE as a first layer. Herein, we report the facile and fast formation of high performance molecular selective membrane by the nonelectrostatic adsorption of anionic PE on the polyvinylidene fluoride (PVDF, zeta potential -17 mV) substrate followed by the electrostatic LbL assembly. Loose nanofiltration membranes have been prepared via both concentration-polarization (CP-LbL, under applied pressure) driven and conventional (C-LbL, dipping) LbL self-assembly. When the first layer is poly(styrene sodium) sulfonic acid, the LbL assembled membrane contains free -SO3- groups and exhibits higher rejection of Na2SO4 and lower rejection of MgCl2. The reversal of salt rejection occurs when the first layer is quaternized polyvinyl imidazole (PVIm-Me). The membrane (five layers) prepared by first depositing PStSO3Na shows higher rejection of several dyes (97.9 to >99.9%), higher NaCl to dye separation factor (52-1800), and higher dye antifouling performance as compared to the membrane prepared by first depositing PVIm-Me (97.5-99.5% dye rejection, separation factor ∼40-200). However, the C-LbL membrane requires a longer time of self-assembly or higher PE concentration to reach a performance close to the CP-LbL membranes. The membranes exhibit excellent pressure, pH (3-12), and salt (60 g L-1) stability. This work provides an insight for the construction of low fouling and high-performance membranes for the fractionation of dye and salt based on the LbL self-assembly sequence.

A High-Affinity "Synthavidin" Receptor for Squaraine Dyes.

Strong-binding host-guest pairings in aqueous media have potential as "supramolecular glues" in biomedical techniques, complementing the widely-used (strept)avidin-biotin combination. We have previously found that squaraine dyes are bound very strongly by tetralactam macrocycles possessing anthracenyl units as cavity walls. Here we show that replacing the anthracenes with pentacyclic 5,7,12,14-tetrahydro-5,7,12,14-tetraoxapentacene (TOP) units generates receptors which bind squaraines with increased affinities (around Ka =1010  m-1 ) and improved selectivities. Binding can be followed through changes to squaraine fluorescence and absorbance. The TOP units are easy to prepare and potentially variable, while the TOP-based receptor shows improved photostability, both in itself and in complex with squaraines. The results suggest that this system could prove valuable in the further development of practical "synthavidin" chemistry.

Aqueous recognition of purine and pyrimidine bases by an anthracene-based macrocyclic receptor.

A water-soluble bis-anthracenyl tetralactam binds biogenic heterocycles with high affinities in aqueous solution, rising to 107 M-1 for the purine hypoxanthine. Recognition occurs through a combination of hydrogen bonding and hydrophobic interactions, and results in fluorescence changes which suggest applications in sensing.

Biomedical Applications of Metal Organic Polygons and Polyhedra (MOPs).

Since the discovery and structural characterization of metal organic polygons and polyhedra (MOPs), scientists have explored their potential in various applications like catalysis, separation, storage, and sensing. In recent years, scientists have explored the potential of supramolecular MOPs in biomedical application. Pioneering works by Ehrlich, Rosenberg, Lippard, Stang and others have demonstrated that MOPs have great potential as a novel class of metallo-therapeutics that can deliver cargoes (drugs and dyes) selectively. In this article, we document the progress made over the past two decades on the biomedical applications of MOPs and discuss the future prospects of this emerging field.

A synthetic transcription factor pair mimic for precise recruitment of an epigenetic modifier to the targeted DNA locus.

We developed an epigenetically active, cooperative DNA binding transcription factor platform assisted by cucurbit[7]uril (CB7) host-guest modules. This new type of molecule termed ePIP-HoGu not only mimics the operation of transcription factors as a pair but also recruits the epigenetic modifier to a particular DNA locus.

Selective glucose sensing in complex media using a biomimetic receptor.

Glucose is a key biomedical analyte, especially relevant to the management of diabetes. Current methods for glucose determination rely on the enzyme glucose oxidase, requiring specialist instrumentation and suffering from redox-active interferents. In a new approach, a powerful and highly selective achiral glucose receptor is mixed with a sample, l-glucose is added, and the induced CD spectrum is measured. The CD signal results from competition between the enantiomers, and is used to determine the d-glucose content. The involvement of l-glucose doubles the signal range from the CD spectrometer and allows sensitivity to be adjusted over a wide dynamic range. It also negates medium effects, which must be equal for both enantiomers. The method has been demonstrated with human serum, pre-filtered to remove proteins, giving results which closely match the standard biochemical procedures, as well as a cell culture medium and a beer sample containing high (70 mM) and low (0.4 mM) glucose concentrations respectively.

Hybrid Molecular Container Based on Glycoluril and Triptycene: Synthesis, Binding Properties, and Triggered Release.

We designed and synthesized a "hybrid" molecular container 1, which is structurally related to both cucurbit[n]uril (CB[n]) and pillar[n]arene type receptors. Receptor 1 was fully characterized by 1 H NMR, 13 C NMR, IR, MS and X-ray single crystal diffraction. The self-association behavior, host-guest recognition properties of 1, and the [salt] dependence of Ka were investigated in detail by 1 H NMR and isothermal titration calorimetry (ITC). Optical transmittance and TEM measurements provide strong evidence that receptor 1 undergoes co-assemble with amphiphilic guest C10 in water to form supramolecular bilayer vesicles (diameter 25.6±2.7 nm, wall thickness ≈3.5 nm) that can encapsulate the hydrophilic anticancer drug doxorubicin (DOX) and the hydrophobic dye Nile red (NR). The release of encapsulated DOX or NR from the vesicles can be triggered by hexamethonium (8 c) or spermine (10) which leads to the disruption of the supramolecular vesicles.

Blurring the Lines between Host and Guest: A Chimeric Receptor Derived from Cucurbituril and Triptycene.

We report the synthesis and X-ray crystal structure of a cucurbituril-triptycene chimeric receptor (1). Host 1 binds to guests typical of CB[6]-CB[8], but also binds to larger guests such as blue box (20) and the Fujita square (22). Intriguingly, the geometries of the 1⋅20 and 1⋅22 complexes blur the lines between host and guest in that both components fulfill both roles within each complex. The fluorescence output of 1 is fully quenched by the formation of complexes with pyridinium-derived guests.

Metal Organic Polyhedra: A Click-and-Clack Approach Toward Targeted Delivery.

Mixed self-assembly of ligands 1 and 2, PXDA (3), and Pd(NO3)2 afforded metal organic polyhedra (MOP 1 - MOP 3) which bear 24 covalently attached CB[7] and cyclooctyne moieties. Post assembly modification (PAM) of MOP 3 by covalent strain promoted alkyne azide click reaction provided MOP 4 R bearing covalently attached functionality (PEG, sulfonate, biotin, c-RGD, fluorescein and cyanine). Orthogonal CB[7] guest mediated non-covalent PAM of MOP 4 R with Ad-FITC afforded MOP 5 RGD Ad-FITC and MOP 5 biotin 0020Ad-FITC. Flow cytometry analysis of the uptake of MOP 5 RGD Ad-FITC toward U87 cells demonstrated improved uptake relative to control MOP lacking c-RGD ligands. These results suggest a broad applicability of orthogonally functionalizable (covalent and non-covalent) MOPs in targeted drug delivery and imaging applications.

Cucurbit[7]uril Enables Multi-Stimuli-Responsive Release from the Self-Assembled Hydrophobic Phase of a Metal Organic Polyhedron.

Mixed self-assembly of ligands 1, 2, 1,6-hexanediamine (HDA), and Pd(NO3)2 afforded Fujita-type metal organic polyhedron MOP1 (diameter ≈ 8.2 nm), which is covalently functionalized with an average of 18 cucurbit[7]uril (CB[7]) units, as evidenced by 1H NMR, diffusion-ordered spectroscopy NMR, and transmission electron microscopy measurements. By virtue of the host-guest properties of CB[7], the inner cavity of MOP can be rendered hydrophobic by using octadecyl HDA (3) as guest during the self-assembly process. The hydrophobic cavity was successfully utilized to trap the hydrophobic dye Nile Red (NR) and the anticancer drug doxorubicin (DOX). The stimuli-responsive release of encapsulated NR or DOX occurs (1) upon addition of a competitive binder (e.g., adamantane ammonium (ADA)) for CB[7], (2) by a dual pH-chemical stimulus involving the protonation state change of adamantane carboxylate at pH 5.8, and (3) by a dual pH-photochemical stimulus involving photoisomerization of trans-6 to cis-6 at pH 5.8. NR is released from NR@MOP2 within HeLa cancer cells. This body of work suggests that the covalent attachment of cucurbit[n]uril to metal organic polyhedra constitutes a promising vehicle for the development of both diagnostic and therapeutic nanoparticles.

Synthetic mimics of biotin/(strept)avidin.

Biotin/(strept)avidin self-assembly is a powerful platform for nanoscale fabrication and capture with many different applications in science, medicine, and nanotechnology. However, biotin/(strept)avidin self-assembly has several well-recognized drawbacks that limit performance in certain technical areas and there is a need for synthetic mimics that can either become superior replacements or operational partners with bio-orthogonal recognition properties. The goal of this tutorial review is to describe the recent progress in making high affinity synthetic association partners that operate in water or biological media. The review starts with a background summary of biotin/(strept)avidin self-assembly and the current design rules for creating synthetic mimics. A series of case studies are presented that describe recent success using synthetic derivatives of cyclodextrins, cucurbiturils, and various organic cyclophanes such as calixarenes, deep cavitands, pillararenes, and tetralactams. In some cases, two complementary partners associate to produce a nanoscale complex and in other cases a ditopic host molecule is used to link two partners. The article concludes with a short discussion of future directions and likely challenges.

Self-assembly of cucurbit[7]uril based triangular [4]molecular necklaces and their fluorescence properties.

Self-assembly of rigid-rod dipyridine ligand 1 with M(en)(NO3)2 (M = Pd, Pt) affords triangular (3, 5) and square (4, 6) supramolecular coordination complexes (SCCs). The binding affinity of 1 toward CB[n]-type containers results in the formation of triangular [4]molecular necklaces ([4]MNs, 7-10) by either one-pot or post complexation approaches as evidenced by 1H NMR, diffusion ordered spectroscopy, and ESI-MS.

Metal-Organic Polyhedron Capped with Cucurbit[8]uril Delivers Doxorubicin to Cancer Cells.

Self-assembly of ligand 1 and Pd(NO3)2 delivers Fujita-type metal-organic polyhedron (MOP) 3 which bears 24 covalently attached methyl viologen units on its external surface, as evidenced by 1H NMR, diffusion-ordered spectroscopy NMR, electrospray mass spectrometry, transmission electron microscopy, and atomic force microscopy measurements. MOP 3 undergoes noncovalent complexation with cucurbit[n]urils to yield MOPs 4-6 with diameter ≈5-6 nm. MOP 5 can be fully loaded with doxorubicin (DOX) prodrug 2 via hetero-ternary complex formation to yield 7. The MOPs exhibit excellent stability toward neutral to slightly acidic pH in 10 mM sodium phosphate buffer, mitigating the concern of disassembly during circulation. The results of MTS assays show that MOP 7 is 10-fold more cytotoxic toward HeLa cells than equimolar quantities of DOX prodrug 2. The enhanced cytotoxicity can be traced to a combination of enhanced cellular uptake of 7 and DOX release as demonstrated by flow cytometry and confocal fluorescence microscopy. The confluence of properties imparted by the polycationic MOP architecture and plug-and-play CB[n] complexation provides a potent new platform for drug delivery application.

Conformational Slippage Determines Rotational Frequency in Five-Component Nanorotors.

Several five-component nanorotors ROT-3 that rotate at different rates were prepared by adding phenanthrolines of distinct lateral size as brake blocks to the four-component nanorotor ROT-2. The brake blocks interfere with the 180° rotor causing the rotational frequency to drop from 97 kHz to 5 kHz. The effect of the rotating brake blocks on the rotational frequency in ROT-3 is accurately predicted by a nanomechanical model called "conformational slippage". For quantification, the interaction of the brake blocks with the trajectory of the main rotator is gauged based on the number of interfering vs. non-interfering conformations as computed by PM6.

Acyclic Cucurbit[n]uril-Type Molecular Container Enables Systemic Delivery of Effective Doses of Albendazole for Treatment of SK-OV-3 Xenograft Tumors.

Approximately, 40-70% of active pharmaceutical ingredients (API) are severely limited by their extremely poor aqueous solubility, and consequently, there is a high demand for excipients that can be used to formulate clinically relevant doses of these drug candidates. Here, proof-of-concept studies demonstrate the potential of our recently discovered acyclic cucurbit[n]uril-type molecular container Motor1 (M1) as a solubilizing agent for insoluble drugs. M1 did not induce significant rates of mutations in various Salmonella typhimurium test strains during the Ames test, suggesting low genotoxicity. M1 also has low risk of causing cardiac toxicity in humans since it did not inhibit the human Ether-à-go-go-Related Gene channel as tested on transfected CHO cell lines via patch clamp analysis. Albendazole (ABZ) is a widely used antihelminthic agent but that has also shown promising efficacy against cancerous cells in vitro. However, due to its low aqueous solubility (2.7 µM) and poor pharmacokinetics, ABZ is clinically limited as an anticancer agent. Here we investigated the potential of M1 as a solubilizing excipient for ABZ formulation. A pharmacokinetic study indicated that ABZ escapes the peritoneal cavity resulting in 78% absolute bioavailability, while its active intermediate metabolite, albendazole sulfoxide, achieved 43% absolute bioavailability. The daily dosing of 681 mg/kg M1 complexed with 3.2 mg/kg of ABZ for 14 days did not result in significant weight loss or pathology in Swiss Webster mice. In vivo efficacy studies using this M1·ABZ inclusion complex showed significant decreases in tumor growth rates and increases in survival of mice bearing SK-OV-3 xenograft tumors. In conclusion, we provide substantial new evidence demonstrating that M1 is a safe and efficient excipient that enables in vivo parenteral delivery of poorly water-soluble APIs.

Fast Response and High Sensitivity of ZnO Nanowires-Cobalt Phthalocyanine Heterojunction Based H2S Sensor.

The room temperature chemiresistive response of n-type ZnO nanowire (ZnO NWs) films modified with different thicknesses of p-type cobalt phthalocyanine (CoPc) has been studied. With increasing thickness of CoPc (>15 nm), heterojunction films exhibit a transition from n- to p-type conduction due to uniform coating of CoPc on ZnO. The heterojunction films prepared with a 25 nm thick CoPc layer exhibit the highest response (268% at 10 ppm of H2S) and the fastest response (26 s) among all samples. The X-ray photoelectron spectroscopy and work function measurements reveal that electron transfer takes place from ZnO to CoPc, resulting in formation of a p-n junction with a barrier height of 0.4 eV and a depletion layer width of ∼8.9 nm. The detailed XPS analysis suggests that these heterojunction films with 25 nm thick CoPc exhibit the least content of chemisorbed oxygen, enabling the direct interaction of H2S with the CoPc molecule, and therefore exhibit the fastest response. The improved response is attributed to the high susceptibility of the p-n junctions to the H2S gas, which manipulates the depletion layer width and controls the charge transport.

Ultrasensitive and selective detection of dopamine using cobalt-phthalocyanine nanopillar-based surface acoustic wave sensor.

A highly selective and sensitive surface acoustic wave (SAW) sensor of dopamine (DA) was developed by depositing cobalt phthalocyanine (CoPc) nanopillars on gold-coated sensing platform of SAW sensor. The developed biosensor presents a sensitivity of 1.6°/nM, has a low limit of detection (LOD) on the order of 0.1 nM, and imparts more selectivity toward DA, since the detection limit of the interfering ascorbic acid (AA) is as high as 1 mM. To understand the selectivity mechanisms of this sensor toward DA, density functional theory-based chemical calculations were carried out. Calculations suggest two different types of interactions: dative bond with a very strong character for DA-CoPc complexes, and significant ionic character in the case of AA-CoPc ones. The interaction energies, in liquid phase, were estimated to be equal to -81 kJ mol(-1) and -38 kJ mol(-1) for DA-CoPc and AA-CoPc complexes, respectively, therefore accounting for the selective detection of DA over AA using tandem CoPc nanopillar-based SAW sensor device. This work demonstrates a simple and efficient design of SAW sensors employing thin nanostructured CoPc biomolecular recognition layers for DA detection.

In situ diazonium-modified flexible ITO-coated PEN substrates for the deposition of adherent silver-polypyrrole nanocomposite films.

In this paper, we report a simple and versatile process of electrografting the aryl multilayers onto indium tin oxide (ITO)-coated flexible poly(ethylene naphthalate) (PEN) substrates using a diazonium salt (4-pyrrolylphenyldiazonium) solution, which was generated in situ from a reaction between the 4-(1H-pyrrol-1-yl)aniline precursor and sodium nitrite in an acidic medium. The first aryl layer bonds with the ITO surface through In-O-C and Sn-O-C bonds which facilitate the formation of a uniform aryl multilayer that is ∼8 nm thick. The presence of the aryl multilayer has been confirmed by impedance spectroscopy as well as by electron-transfer blocking measurements. These in situ diazonium-modified ITO-coated PEN substrates may find applications in flexible organic electronics and sensor industries. Here we demonstrate the application of diazonium-modified flexible substrates for the growth of adherent silver/polpyrrole nanocomposite films using surface-confined UV photopolymerization. These nanocomposite films have platelet morphology owing to the template effect of the pyrrole-terminated aryl multilayers. In addition, the films are highly doped (32%). This work opens new areas in the design of flexible ITO-conductive polymer hybrids.

Reversible cargo shipping between orthogonal stations of a nanoscaffold upon redox input.

The sterically shielded terpyridine was prepared, both as a new ligand and as part of the four-station nanoscaffold . Mixing of terpyridine , the parent phenanthroline and the shielded phenanthroline in the presence of Zn(2+) (1 : 1 : 1 : 1) furnished quantitatively the inverse HETTAP complex [Zn()()](2+) by self-sorting, while in the presence of Cu(+) the HETPHEN complex [Cu()()](+) was preferred (89%). Due to the akin coordination preferences of Cu(2+) and Zn(2+), the above self-sorting was implemented for Cu(+)/Cu(2+) on nanoscaffold , the latter equipped with the binding motifs of (PhenAr2) and (TerpyAr2). When was reacted with Cu(+) and phenanthroline () in a 1 : 2 : 2 ratio, only the PhenAr2 stations became involved in complex formation (= (Cu)phen). In contrast, upon oxidative formation of Cu(2+), ligand was exclusively moved to the TerpyAr2 stations ((Cu)terpy). Electrochemical oxidation-reduction prompted the cargo to be shipped reversibly on a subsecond time scale between the two different stations of .

Core/shell, protuberance-free multiwalled carbon nanotube/polyaniline nanocomposites via interfacial chemistry of aryl diazonium salts.

Highly uniform core-shell like multi-walled carbon nanotubes-polyaniline (MWCNT-PANI) nanocomposites were prepared in two steps (i) surface modification of MWCNTs with a 4-aminodiphenylamine group via in situ diazonium generation process; and (ii) polymerization of aniline onto surface modified MWCNTs. This functionalization helped to easily disperse the MWCNTs in acidic solutions; hence it is suitable for the chemical oxidative polymerization of aniline. It was found that MWCNT-PANI nano-composites with higher MWCNTs loading yield PANI chains with more quinoid units than the pure PANI, which results in significant improvement in the conductivity of the composites. This facile approach of synthesizing core-shell nanocomposites highlights the efficiency of the interfacial chemistry of aryl diazonium salts in generating conductive polymer/MWCNT nanocomposites with enhanced conductivity and high surface area.