Hybrid air-bulk multi-pass cell compressor for high pulse energies with full spatio-temporal characterization.

Multi-pass cell (MPC) compressors have proven to be the method of choice for compression of high average power long-pulse Yb lasers. Yet, generating sub-30 fs pulses at high pulse energy with compact and simple components remains a challenge. This work demonstrates an efficient and cost-effective approach for nonlinear pulse compression at high pulse energy using a hybrid air-bulk MPC. By carefully balancing the relative nonlinear contributions of ambient air and fused silica, we achieve strong spectral broadening without dispersion engineering or pressure-control inside the cell at 400-µJ pulse energy. In this way, we compress pulses from 220 fs to 27 fs at 40.3 W of average power (100 kHz repetition rate), enhancing the peak power from 1.6 GW to 10.2 GW while maintaining 78% of the energy within the main pulse. Our approach combines the strengths of gas-filled and bulk compression schemes and exhibits excellent overall optical transmission (91%) and spectral uniformity. Moreover, we utilize the INSIGHT technique to investigate spatio-temporal couplings and geometrical aberrations of the compressed pulse. Our results demonstrate remarkable temporal homogeneity, with an average Strehl ratio of 0.97 consistently observed throughout the entire spectral profile. Additionally, all spectrally-integrated Zernike coefficients for geometrical aberrations maintain values below 0.02λ.

GHz repetition rate, sub-100-fs Ho:CALGO laser at 2.1†µm with watt-level average power.

We report on a GHz fundamental repetition rate Kerr-lens mode-locked Ho:CALGO laser emitting at 2.1 µm. The laser employs a ring cavity to increase the fundamental repetition rate to 1.179 GHz and can be made to oscillate in both directions stably with nearly identical performance: for the counterclockwise oscillation, it generates 93-fs pulses at 1.68 W of average power, whereas 92 fs and 1.69 W were measured for the clockwise operation. Our current results represent the highest average power from a 2-µm GHz oscillator and, to our knowledge, the first sub-100-fs pulse duration from a Ho-based oscillator.

Advanced Solid-State Lasers: feature issue introduction.

This Joint Issue of Optics Express and Optical Materials Express features 40 peer-reviewed articles written by authors who participated in the Advanced Solid State Lasers Conference, part of the Optica Laser Congress and Exhibition held in Barcelona, Spain from December 11-15, 2022. This review provides a brief summary of these articles covering the latest developments in laser host and nonlinear crystals, structured materials, fiber lasers and amplifiers, ultrafast mode-locked lasers and optical parametric amplifiers, frequency-doubled Raman lasers, vortex beams, and novel concepts in laser design.

Temperature-dependent THz properties and emission of organic crystal BNA.

As high-average power ultrafast lasers become increasingly available for nonlinear conversion, the temperature dependence of the material properties of nonlinear crystals becomes increasingly relevant. Here, we present temperature-dependent THz complex refractive index measurements of the organic crystal BNA over a wide range of temperatures from 300 K down to 80 K for THz frequencies up to 4 THz for the first time. Our measurements show that whereas the temperature-dependent refractive index has only minor deviation from room temperature values, the temperature-dependent absorption coefficient decreases at low temperature (-24% from 300 K to 80 K). We additionally compare these measurements with conversion efficiency and spectra observed during THz generation experiments using the same crystal actively cooled in the same temperature range, using an ultrafast Yb-laser for excitation. Surprisingly, the damage threshold of the material does not improve significantly upon active cooling, pointing to a nonlinear absorption mechanism being responsible for damage. However, we observe a significant increase in THz yield (+23%) at lower temperatures, which is most likely due to the reduced THz absorption. These first findings will be useful for future designs of high-average power pumped organic-crystal based THz-TDS systems.

Nonlinear pulse compression of a 200 mJ and 1†kW ultrafast thin-disk amplifier.

We present a high-energy laser source consisting of an ultrafast thin-disk amplifier followed by a nonlinear compression stage. At a repetition rate of 5 kHz, the drive laser provides a pulse energy of up to 200 mJ with a pulse duration below 500 fs. Nonlinear broadening is implemented inside a Herriott-type multipass cell purged with noble gas, allowing us to operate under different seeding conditions. Firstly, the nonlinear broadening of 64 mJ pulses is demonstrated in an argon-filled cell, showing a compressibility down to 32 fs. Finally, we employ helium as a nonlinear medium to increase the energy up to 200 mJ while maintaining compressibility below 50 fs. Such high-energy pulses with sub-50 fs duration hold great promise as drivers of secondary sources.

Low-noise, 2-W average power, 112-fs Kerr-lens mode-locked Ho:CALGO laser at 2.1†µm.

We report on an in-band pumped soft-aperture Kerr-lens mode-locked Ho3+-doped CaGdAlO4 (Ho:CALGO) bulk laser at 2.1 µm, generating 2 W of average power with 112 fs pulses at 91-MHz repetition rate. To the best of our knowledge, this is the highest average power from a 100-fs class mode-locked laser based on a Tm3+ or Ho3+ doped bulk material. We show that the laser has excellent noise properties, with an integrated relative intensity noise of 0.02% and a timing jitter of 950 fs (rms phase noise 0.543 mrad) in the integration interval from 10 Hz to 10 MHz of offset frequency. The demonstrated combination of high average power, short pulses, and low noise makes this an outstanding laser source for many applications at 2.1 µm.

Spectral broadening of 2-mJ femtosecond pulses in a compact air-filled convex-concave multi-pass cell.

Multi-pass cell (MPC) based temporal pulse compressors have emerged in recent years as a powerful and versatile solution to the intrinsic issue of long pulses from Yb-based high-power ultrafast lasers. The spectral broadening of high-energy (typically more than 100 µJ) pulses has only been realized in gas-filled MPCs due to the significantly lower nonlinear coefficient of gases compared with solid-state media. Whereas these systems reach impressive performance in terms of spectral broadening with very low spatiotemporal couplings, they are typically complex setups, i.e., large and costly pressure-controlled vacuum chambers to avoid strong focusing, ionization, and damage to the mirrors. Here, we present spectral broadening of 2-mJ pulses in a simple and compact (60-cm-long) multi-pass cell operated in ambient air. Instead of the traditional Herriott cell with concave-concave (CC/CC) mirrors, we use a convex-concave (CX/CC) design, where the beam stays large at all times, both minimizing damage and allowing operation in ambient air. We demonstrate spectral broadening of 2.1-mJ pulses at 100 kHz repetition rate (200 W of average power) from 2.1 nm (pulse duration of 670 fs) to a spectral bandwidth of 24.5 nm, supporting 133-fs pulses with 96% transmission efficiency. We show the compressibility of these pulses down to 134 fs and verify that the spectral homogeneity of the beam is similar to previously reported CC/CC designs. To the best of the authors' knowledge, this is the first report of a CX/CC MPC compressor operated at high pulse energies in air. Because of its simplicity, small footprint, and low cost, we believe this demonstration will have significant impact in the ultrafast laser community.

8.7-W average power, in-band pumped femtosecond Ho:CALGO laser at 2.1 µm.

We report on an in-band pumped SESAM mode-locked Ho:CALGO bulk laser with a record-high average power of 8.7 W and an optical-to-optical efficiency of 38.2% at a central wavelength of 2.1 µm. At this power level, the bulk laser generates pulses with a duration of 369 fs at an 84.4-MHz repetition rate, corresponding to a pulse energy of 103 nJ and a peak power of 246 kW. To the best of our knowledge, this is the highest average power and pulse energy directly generated from a mode-locked bulk laser in the 2-3 µm wavelength region. Our current results indicate that Ho:CALGO is a competitive candidate for average power scaling of 2-µm femtosecond lasers.

50-W average power Ho:YAG SESAM-modelocked thin-disk oscillator at 2.1†µm.

Ultrafast laser systems operating with high-average power in the wavelength range from 1.9 µm to 3 µm are of interest for a wide range of applications for example in spectroscopy, material processing and as drivers for secondary sources in the XUV spectral region. In this area, laser systems based on holmium-doped gain materials directly emitting at 2.1 µm have made significant progress over the past years, however so far only very few results were demonstrated in power-scalable high-power laser geometries. In particular, the thin-disk geometry is promising for directly modelocked oscillators with high average power levels that are comparable to amplifier systems at MHz repetition rate. In this paper, we demonstrate semiconductor saturable absorber mirror (SESAM) modelocked Ho:YAG thin-disk lasers (TDLs) emitting at 2.1-µm wavelength with record-holding performance levels. In our highest average power configuration, we reach 50 W of average power, with 1.13-ps pulses, 2.11 µJ of pulse energy and ∼1.9 MW of peak power. To the best of our knowledge, this represents the highest average power, as well as the highest output pulse energy so far demonstrated from a modelocked laser in the 2-µm wavelength region. This record performance level was enabled by the recent development of high-power GaSb-based SESAMs with low loss, adapted for high intracavity power and pulse energy. We also explore the limitations in terms of reaching shorter pulse durations at high power with this gain material in the disk geometry and using SESAM modelocking, and present first steps in this direction, with the demonstration of 30 W of output power, with 692-fs pulses in another laser configuration. In the near future, with the development of a next generation of SESAM samples for this wavelength region, we believe higher pulse energy approaching the 10-µJ regime, and sub-500-fs pulses should be straightforward to reach using SESAM modelocking.

Average power scaling of THz spintronic emitters efficiently cooled in reflection geometry.

Metallic spintronic terahertz (THz) emitters have become well-established for offering ultra-broadband, gapless THz emission in a variety of excitation regimes, in combination with reliable fabrication and excellent scalability. However, so far, their potential for high-average-power excitation to reach strong THz fields at high repetition rates has not been thoroughly investigated. In this article, we explore the power scaling behavior of tri-layer spintronic emitters using an Yb-fiber excitation source, delivering an average power of 18.5 W (7 W incident on the emitter after chopping) at 400 kHz repetition rate, temporally compressed to a pulse duration of 27 fs. We confirm that a reflection geometry with back-side cooling is ideally suited for these emitters in the high-average-power excitation regime. In order to understand limiting mechanisms, we disentangle the effects on THz power generation by average power and pulse energy by varying the repetition rate of the laser. Our results show that the conversion efficiency is predominantly determined by the incident fluence in this high-average-power, high-repetition-rate excitation regime if the emitters are efficiently cooled. Using these findings, we optimize the conversion efficiency and reach highest excitation powers in the back-cooled reflection geometry. Our findings provide guidelines for scaling the power of THz radiation emitted by spintronic emitters to the milliwatt-level by using state-of-the-art femtosecond sources with multi-hundred-Watt average power to reach ultra-broadband, strong-field THz sources with high repetition rate.

Feature issue introduction: advanced solid-state lasers.

This joint issue of Optics Express and Optical Materials Express features 36 state-of-the art articles written by authors who participated in the international conference advanced solid state lasers held online from October 3-7, 2021. This review provides a summary of these articles covering a wide spectrum of topics around solid-state lasers from materials research to sources and from design innovation to applications.

Nonlinear pulse compression of a thin-disk amplifier and contrast enhancement via nonlinear ellipse rotation.

We demonstrate pulse compressibility from 840 fs to 38 fs of 10 mJ pulses from a thin-disk amplifier at a repetition rate of 3 kHz after nonlinear broadening in a multipass cell. In addition, the temporal-intensity contrast is enhanced via nonlinear ellipse rotation of more than a factor 50 with an optical efficiency of 56%. We believe this is the first published experimental combination of multipass cell-based nonlinear compression and nonlinear ellipse rotation-based contrast enhancement preserving both pulse compressibility and beam quality.

Milliwatt average power, MHz-repetition rate, broadband THz generation in organic crystal BNA with diamond substrate.

We demonstrate a 13.3 MHz repetition rate, broadband THz source with milliwatt- average power, obtained by collinear optical rectification of a high-power Yb-doped thin-disk laser in the organic crystal BNA (N-benzyl-2-methyl-4-nitroaniline). Our source reaches a maximum THz average power of 0.95 mW with an optical-to-THz efficiency of 4×10-4 and a spectral bandwidth spanning up to 6 THz at -50 dB, driven by 2.4 W average power (after an optical chopper with duty cycle of 10%), 85 fs-pulses. This high average power excitation was possible without damaging the crystal by using a diamond-heatsinked crystal with significantly improved thermal properties. To the best of our knowledge, this result represents the highest THz average power reported so far using the commercially available organic crystal BNA, showing the potential of these crystals for high average power, high repetition rate femtosecond excitation. The combination of high power, high dynamic range, high repetition rate and broadband spectrum makes the demonstrated THz source highly attractive to improve various time-domain spectroscopy applications. Furthermore, we present a first exploration of the thermal behavior of BNA in this excitation regime, showing that thermal effects are the main limitation in average power scaling in these crystals.

Analysis of THz generation using the tilted-pulse-front geometry in the limit of small pulse energies and beam sizes.

Optical rectification in lithium niobate using the tilted-pulse-front geometry is one of the most commonly used techniques for efficient generation of energetic single-cycle THz pulses and the details of this generation scheme are well understood for high pulse energy driving lasers, such as mJ-class, kHz-repetition rate Ti:Sa amplifier systems. However, as modern Yb-based laser systems with ever increasing repetition rate become available, other excitation regimes become relevant. In particular, the use of more moderate pulse energies (in the few µJ to multi-10 µJ regime), available nowadays by laser systems with MHz repetition rates, have never been thoroughly explored. As increasing the repetition rate of THz sources for spectroscopy becomes more relevant in the community, we present a thorough numerical analysis of this regime using a 2+1-D numerical model. Our work allows us to confirm experimental trends observed in this unusual excitation regime and shows that the conversion efficiency is naturally limited by the small pump beam sizes as a consequence of spatial walk-off between the pump and THz beams. Based on our findings, we discuss strategies to overcome the current limitations, which will pave the way for powerful THz sources approaching the watt level with multi-MHz repetition rates.

High-power modelocked thin-disk oscillators as potential technology for high-rate material processing.

High average power femtosecond lasers have made spectacular progress in the last decades - moving from laboratory-based systems with maximum average powers of tens of watts to kilowatt-class mature industrial systems in a short time. The availability of such systems opens new possibilities in many fields; one of the most prominent ones that have driven many of these technological advances is precise high-speed material processing, where ultrashort pulses have long been recognized to provide highest precision processing of virtually any material, and high average power extends these capabilities to highest processing rates. Here, we focus our attention on one high-average power technology with large unexplored potential for this specific application: directly modelocked multi-MHz repetition frequency high-power thin-disk oscillators. We review their latest state-of-the-art and discuss future directions and challenges, specifically with this application field in mind.

Efficient nonlinear compression of a mode-locked thin-disk oscillator to 27 fs at 98 W average power.

We demonstrate efficient pulse compression of a 13.4 MHz, 534 fs, 123 W, Yb:YAG thin-disk oscillator down to 27 fs at 98 W average power, resulting in a record-high 166 MW peak power from an amplifier-free oscillator-driven setup. Our compressor is based on two stages: one multipass cell allowing us to reduce the pulse duration to sub-90 fs and, subsequently, a multiple-plate compressor, allowing us to reach 27 fs. The overall average power compression efficiency is 80%, and the beam has excellent beam quality and homogeneity. In addition, we demonstrate further spectral broadening that supports a transform limit of 5 fs in a second multiple-plate stage, demonstrating the potential for reaching a 100 W class, amplifier-free, few-cycle source in the near future. The performance of this unique source is very promising for applications previously restricted to amplified sources, such as efficient generation of extreme ultraviolet light at high repetition rate, and the generation of high-power broadband THz radiation.

Broadband terahertz pulse generation driven by an ultrafast thin-disk laser oscillator.

We demonstrate broadband THz generation driven by an ultrafast thin-disk laser (TDL) oscillator. By optical rectification of 50-fs pulses at 61 MHz repetition rate in a collinear geometry in crystalline GaP, THz radiation with a central frequency at around 3.4 THz and a spectrum extending from below 1 THz to nearly 7 THz are generated. We realized a spectroscopic characterization of a GaP crystal and a benchmark measurement of the water-vapor absorption spectrum in the THz range. Sub-50-GHz resolution is achieved within a 5 THz bandwidth. Our experiments show the potential of ultrafast TDL oscillators for driving MHz-repetition-rate broadband THz systems.

Efficient OPSL-pumped mode-locked Yb:Lu2O3 laser with 67% optical-to-optical efficiency.

We present a mode-locked Yb:Lu2O3 laser with up to 67% of optical-to-optical efficiency. By utilizing a high brightness optically pumped semiconductor laser (OPSL) as a pump source and using a semiconductor saturable absorber mirror (SESAM) we obtained self-starting mode locking. A pulse duration of 571 fs at 4.73 W of average output power with an optical-to-optical efficiency of 67% was achieved. In a slightly different cavity configuration the pulse duration was reduced to 313 fs at 2.16 W of average output power. In both cases the pulse duration was longer than the Fourier limit and the spectrum supports significantly shorter pulse durations. The laser wavelength is centered at 1034 nm and the repetition rate is 100.76 MHz in both cases. In continuous wave fundamental mode operation the optical-to-optical efficiency was as high as 78% with output powers exceeding 5 W.

Frequency comb offset dynamics of SESAM modelocked thin disk lasers.

We present a detailed study of the carrier-envelope offset (CEO) frequency dynamics of SESAM modelocked thin disk lasers (TDLs) pumped by kW-class highly transverse multimode pump diodes with a typical M(2) value of 200-300, and give guidelines for future frequency stabilization of multi-100-W oscillators. We demonstrate CEO frequency detection with > 30 dB signal-to-noise ratio with a resolution bandwidth of 100 kHz from a SESAM modelocked Yb:YAG TDL delivering 140 W average output power with 748-fs pulses at 7-MHz pulse repetition rate. We compare with a low-power CEO frequency stabilized Yb:CALGO TDL delivering 2.1 W with 77-fs pulses at 65 MHz. For both lasers, we perform a complete noise characterization, measure the relevant transfer functions (TFs) and compare them to theoretical models. The measured TFs are used to determine the propagation of the pump noise step-by-step through the system components. From the noise propagation analysis, we identify the relative intensity noise (RIN) of the pump diode as the main contribution to the CEO frequency noise. The resulting noise levels are not excessive and do not prevent CEO frequency stabilization. More importantly, the laser cavity dynamics are shown to play an essential role in the CEO frequency dynamics. The cavity TFs of the two lasers are very different which explains why at this point a tight CEO frequency lock can be obtained with the Yb:CALGO TDL but not with the Yb:YAG TDL. For CEO stabilization laser cavities should exhibit high damping of the relaxation oscillations by nonlinear intra-cavity elements, for example by operating a SESAM in the roll-over regime. Therefore the optimum SESAM operation point is a trade-off between enough damping and avoiding multiple pulsing instabilities. Additional cavity components could be considered for supplementary damping independent of the SESAM operation point.

Efficient spectral broadening in the 100-W average power regime using gas-filled kagome HC-PCF and pulse compression.

We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core kagome hollow-core photonic crystal fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a kagome HC-PCF containing 13 bar of static argon gas. Subsequent compression tests performed using 8.4% of the full available power resulted in a pulse duration as short as 88 fs using the spectrally broadened output from the fiber. Compressing the full transmitted power through the fiber (118 W) could lead to a compressed output of >100 W of average power and >100 MW of peak power with an average power compression efficiency of 88%. This simple laser system with only one ultrafast laser oscillator and a simple single-pass fiber pulse compressor, generating both high peak power >100 MW and sub-100-fs pulses at megahertz repetition rate, is very interesting for many applications such as high harmonic generation and attosecond science with improved signal-to-noise performance.