RESUMEN
Full-field dynamic shearography and laser Doppler vibrometric scanning are used to investigate the local contact acoustic nonlinear generation of delamination-induced effects on the vibration of a harmonically excited composite plate containing an artificial defect. Nonlinear elastic behavior caused by the stress-dependent boundary conditions at the delamination interfaces of a circular defect is also simulated by a 3-D second-order, finite-difference, staggered-grid model (displacement-stress formulation). Both the experimental and simulated data reveal an asymmetric motion of the layer above the delamination, which acts as a membrane vibrating with enhanced displacement amplitude around a finite offset displacement. The spectrum of the membrane motion is enriched with clapping-induced harmonics of the excitation frequency. In case of a sufficiently thin and soft membrane, the simulations reveal clear modal behavior at sub-harmonic frequencies caused by inelastic clapping.
RESUMEN
Because of the growing number of applications of phononic crystals and other periodic structures, there is a renewed and growing interest in understanding the interaction of ultrasound with periodically corrugated surfaces. This paper presents a theoretical investigation of the transformation of ultrasound incident from the solid side onto a solid-liquid periodically corrugated interface. It is shown that it is possible to tailor the shape of a corrugated surface with given periodicity such that there is a significant amount of energy transformed into Scholte-Stoneley waves than if pure saw-tooth or sine-shaped surfaces were used. This permits the fabrication of periodic structures that can be patched on or engraved in body parts of a construction and enables efficient generation of Scholte-Stoneley waves. The study is performed for incident homogeneous plane waves as well as for bounded beams. Incident longitudinal waves are studied as well as incident shear waves.