Hierarchical Transparent Back Contacts for Bifacial CdTe PV.

A hierarchical transparent back contact leveraging an AlGaOx passivating layer, Ti3C2Tx MXene with a high work function, and a transparent cracked film lithography (CFL) templated nanogrid is demonstrated on copper-free cadmium telluride (CdTe) devices. AlGaOx improves device open-circuit voltage but reduces the fill factor when using a CFL-templated metal contact. Including a Ti3C2Tx interlayer improves the fill factor, lowers detrimental Schottky barriers, and enables metallization with CFL by providing transverse conduction into the nanogrid. The bifacial performance of an AlGaOx/Ti3C2Tx/CFL gold contact is evaluated, reaching 19.5% frontside efficiency and 2.8% backside efficiency under 1-sun illumination for a copper-free, group-V doped CdTe device. Under dual illumination, device power generation reached 200 W/m2 with 0.1 sun backside illumination.

LED-based characterization of solar cells for underwater applications.

Improved solar energy harvesting in aquatic environments would allow for superior environmental monitoring. However, developing underwater solar cells is challenging as evaluation typically requires deployment in the field or in large water tanks that can simulate aquatic light conditions. Here, we present a protocol to test underwater solar cells using a light-emitting diode (LED)-based characterization technique usable in a typical laboratory setting. We describe steps for installing and running Python code, matching LEDs to irradiance, characterizing underwater solar cells, and calculating underwater solar cell efficiency. For complete details on the use and execution of this protocol, please refer to Röhr et al.1.

Identifying optimal photovoltaic technologies for underwater applications.

Improving solar energy collection in aquatic environments would allow for superior environmental monitoring and remote sensing, but the identification of optimal photovoltaic technologies for such applications is challenging as evaluation requires either field deployment or access to large water tanks. Here, we present a simple bench-top characterization technique that does not require direct access to water and therefore circumvents the need for field testing during initial trials of development. Employing LEDs to simulate underwater solar spectra at various depths, we compare Si and CdTe solar cells, two commercially available technologies, with GaInP cells, a technology with a wide bandgap close to ideal for underwater solar harvesting. We use this method to show that while Si cells outperform both CdTe and GaInP cells under terrestrial AM1.5G solar irradiance, CdTe and GaInP cells outperform Si cells at depths >2 m, with GaInP cells operating with underwater efficiencies approaching 54%.