Depolymerization of Polyester Fibers with Dimethyl Carbonate-Aided Methanolysis.

Polyester fibers, comprising mostly poly(ethylene terephthalate) with high crystalline content, represent the most commonly produced plastic for ubiquitous textiles, and approximately 60 million tons are manufactured annually worldwide. Considering the social issues of mismanaged waste produced from used textile products, there is an urgent demand for sustainable waste polyester fiber recycling methods. We developed a low-temperature, rapid, and efficient depolymerization method for recycling polyester fibers. By utilizing methanolysis with dimethyl carbonate as a trapping agent for ethylene glycol, depolymerization of polyester fibers from textile products proceeded at 50 °C for 2 h, affording dimethyl terephthalate (DMT) in a >90% yield. This strategy allowed us to depolymerize even practical polyester textiles blended with other fibers to selectively isolate DMT in high yields. This method was also applicable for colored polyester textiles, and analytically pure DMT was isolated via depolymerization and decolorization processes.

Preliminary report on ultrashort perioperative partial-breast irradiation with multicatheter interstitial brachytherapy for early-stage breast cancer.

PURPOSE: Perioperative partial-breast irradiation (PBI) with multicatheter interstitial brachytherapy (MIB) is less invasive and more convenient than postoperative one. This study aimed to compare ultrashort perioperative MIB-PBI (uPBI) and conventional perioperative MIB-PBI (cPBI) performed during the same period of time. METHODS: Inclusion criteria of the study were patients aged ≥ 40 years and those with T0-2 (≤ 3 cm), N0-mi, and negative margins on mammography. The locoregional recurrence (LRR) and toxicity rates were compared between uPBI at a dose of 25.2 Gy in four fractions and cPBI at a dose of 32 Gy in eight fractions. RESULTS: In total, 198 patients (151 with uPBI and 47 with cPBI) were evaluated. At a median follow-up of 20.1 months, one (0.66%) patient in the uPBI group had LRR. The 2-year ipsilateral breast tumor recurrence-free survival rates of the uPBI and cPBI groups were 98.7% and 100%, respectively. The highest toxicity grades were grade 1 in 23 (15.2%) and grade 2 in 2 (1.3%) patients in the uPBI group, and grade 1 in 8 (17.0%) and grade 2 in 1 (2.1%) patient in the cPBI group. None of the patients in the two groups presented with grade 3 and higher toxicities. The toxicity rates between the two groups did not significantly differ. Further, 22 (14.6%) patients in the uPBI group and 8 (17.0%) in the cPBI group, and 3 (2.0%) patients in the uPBI group and 1 (2.1%) in the cPBI had acute and late toxicities, respectively. The timing of toxicity development between the two groups did not significantly differ. CONCLUSIONS: Although this preliminary report included a small sample size and had a short follow-up period, the local control and toxicity rates were similar between the uPBI and cPBI groups. Further research is warranted to investigate the ideal dose schedule of MIB-PBI.

Hydroxylation-Depolymerization of Oxyphenylene-Based Super Engineering Plastics To Regenerate Arenols.

Super engineering plastics, high-performance thermoplastic resins, show high thermal stability and mechanical strength as well as chemical resistance. On the other hand, chemical recycling for these plastics has not been developed due to their stability. This study describes depolymerization of oxyphenylene super engineering plastics via carbon-oxygen main chain cleaving hydroxylation reaction with an alkali hydroxide nucleophile. This method is conducted with cesium hydroxide as a hydroxy source and calcium hydride as a dehydration agent in 1,3-dimethyl-2-imidazolidinone, which provides hydroxylated monomers effectively. In the case of polysulfone, both 4,4'-sulfonyldiphenol (bisphenol S) and 4,4'-(propane-2,2-diyl)diphenol (bisphenol A) were obtained in high yields. Other super engineering plastics such as polyethersulfone, polyphenylsulfone, and polyetheretherketone were also applicable to this depolymerization.

Impact of de-escalating systemic therapy guided by 21-gene assay on locoregional recurrence after partial-breast irradiation.

PURPOSE: Partial-breast irradiation (PBI) has been performed as alternative to whole-breast irradiation (WBI) in breast-conserving therapy (BCT). Recently, the 21-gene recurrence score (RS) was introduced to determine the adjuvant therapy for estrogen receptor (ER)-positive, and human epidermal growth factor receptor 2 (HER2)-negative diseases. However, the impact of RS-based systemic therapy on locoregional recurrence (LRR) following BCT with PBI remains uninvestigated. METHODS AND MATERIALS: Patients with ER-positive, HER2-negative, and node-negative breast cancer who underwent BCT with PBI were examined during May 2012-March 2022. In addition to immunohistochemistry (IHC), RS was available to decide on adjuvant therapy. RESULTS: In total, 431 patients were evaluated with a median followup of 48.6 months. The 4-year LRR-free survival rates were 97.3% and 96.4% in the IHC and RS cohorts, respectively (p = 0.50). Ki67 of >20% was significantly associated with LRR in the multivariate analysis (HR 4.39, p < 0.05). For patients with Ki67 > 20%, 29 of 71 (40.8%) and 46 of 59 (78.0%) patients received only endocrine therapy in the IHC and RS cohorts, respectively (p < 0.0001). For patients with Ki67 >20% who received only endocrine therapy, the 4-year LRR-free survival rates were 91.8% in the IHC cohort and 94.6% in the RS cohort (p = 0.29) CONCLUSIONS: Although the introduction of RS increased the number of patients receiving endocrine therapy alone for Ki67 >20% of disease by two times, the LRR-free survival after BCT with PBI could be maintained. However, further studies from multiple institutions with longer followup data are required.

Borane-Protecting Strategy for Hydrosilylation of Phosphorus-Containing Olefins.

Ir-catalyzed hydrosilylation of the alkenyl phosphine borane complex 1 was achieved to give the corresponding products 2. Because the phosphino group coordinates with metals and is unstable under aerobic conditions, the formation of the corresponding borane adduct was effective not only to promote the target hydrosilylation but also to keep 1 stable under aerobic conditions. The removal of coordinated borane from 2 was readily performed with the treatment by 1,4-diazabicyclo[2.2.2]octane to apply to further transformations. The immobilization and following deprotection of 2 on the surface of mesoporous silica were also examined.

Direct Conversion of Low-Concentration CO2 into N-Aryl and N-Alkyl Carbamic Acid Esters Using Tetramethyl Orthosilicate with Amidines as a CO2 Capture Agent and a Catalyst.

Herein, we report the direct conversion of low-concentration CO2 (15 vol %), equivalent to the CO2 concentration in the exhaust gas from a thermal power station, into carbamic acid esters (CAEs), which are precursors for pharmaceuticals, agrochemicals, and isocyanates. The reaction was performed using Si(OMe)4 as a nonmetallic regenerable reagent and 1,8-diazabicyclo[5.4.0]undec-7-ene as a CO2 capture agent and catalyst. This reaction system does not require the addition of metal complex catalysts or metal salt additives and is therefore simpler than our previously reported reaction system involving Ti(OR)4 and a Zn(II) catalyst. A variety of N-aryl, N-alkyl, and bis CAEs (precursors of polyurethane raw materials) were obtained in moderate to high yields (45-77% for 6 examples, 84-89% for 7 examples). In addition, bis CAEs were successfully synthesized from simulated exhaust gas containing impurities such as SO2, NO2, and CO or on a gram scale. We believe that this method can eliminate the use of toxic phosgene as the raw material for isocyanate production and mitigate CO2 emissions.

Identifying large vessel occlusion using the hyperdense artery sign in patients treated with mechanical thrombectomy.

OBJECTIVES: The hyperdense artery sign on non-contrast computed tomography-reconstructed images is useful for identifying large vessel occlusion in acute ischemic stroke. This study aimed to assess its efficacy in patients with large vessel occlusion treated with mechanical thrombectomy. MATERIALS AND METHODS: This retrospective and prospective single-centered study from June 2019 to May 2021 evaluated the use of non-contrast computed tomography-reconstructed images for detecting hyperdense artery sign to identify large vessel occlusion from June 2020 to May 2021. We registered consecutive potential candidates for mechanical thrombectomy due to suspected stroke and assessed the accuracy of hyperdense artery sign on non-contrast computed tomography-reconstructed images for large vessel occlusion in the hyperacute setting. Non-contrast computed tomography images were reconstructed into maximum intensity projection images with iterative reconstruction algorithms to detect hyperdense artery signs. We compared the door-to-puncture time and functional outcome at 90 days before and after employing non-contrast computed tomography-reconstructed images in patients with large vessel occlusion treated with mechanical thrombectomy. RESULTS: The cohort included 82 patients, wherein 47 were treated with mechanical thrombectomy. The sensitivity (96%) and specificity (94%) of hyperdense artery sign on non-contrast computed tomography-reconstructed images for large vessel occlusion were performed. The door-to-puncture time was significantly shortened after using non-contrast computed tomography-reconstructed images (49 versus 28 min, p = 0.001), but the functional outcome at 90 days remained unchanged. CONCLUSIONS: Non-contrast computed tomography-reconstructed images, as a vascular imaging tool for mechanical thrombectomy, can reduce workflow time in hospitals by identifying large vessel occlusion with high sensitivity and specificity.

Controlled Growth of Platinum Nanoparticles on Amorphous Silica from Grafted Pt-Disilicate Complexes.

Supported platinum nanoparticles are currently the most functional catalysts applied in commercial chemical processes. Although investigations have been performed to improve the dispersion and thermal stability of Pt particles, it is challenging to apply amorphous silica supports to these systems owing to various Pt species derived from the non-uniform surface structure of the amorphous support. Herein, we report the synthesis and characterization of amorphous silica-supported Pt nanoparticles from (cod)Pt-disilicate complex (cod = 1,5-cyclooctadiene), which forms bis-grafted surface Pt species regardless of surface heterogeneity. The synthesized Pt nanoparticles were highly dispersible and had higher hydrogenation activity than those prepared by the impregnation method, irrespective of the calcination and reduction temperatures. The high catalytic activity of the catalyst prepared at low temperatures (such as 150 °C) was attributed to the formation of Pt nanoparticles triggered by the reduction of cod ligands under H2 conditions, whereas that of the catalyst prepared at high temperatures (up to 450 °C) was due to the modification of the SiO2 surface by grafting of the (cod)Pt-disilicate complex.

Stereodivergent dehydrative allylation of ß-keto esters using a Ru/Pd synergistic catalyst.

α-Alkylation of a ß-keto ester is a frequently used reaction for carbon-carbon bond formation. However, extension to a stereoselective reaction remains a significant challenge, because the product easily racemizes under acidic or basic conditions. Here, we report a hybrid system consisting of Pd and Ru complexes that catalyzes the asymmetric dehydrative condensation between cinnamyl-type allylic alcohols and ß-keto esters. α-Non-substituted ß-keto ester can be allylated to afford an α-mono-substituted product with high regio-, diastereo-, and enantioselectivity. No epimerization occurs owing to the nearly neutral conditions, which is achieved by a rapid proton transfer from Pd-enolate formation to Ru π-allyl complex formation. Four diastereomers can be synthesized on demand by changing the stereochemistry of the Pd or Ru complex. Eight stereoisomers with three adjacent stereogenic centers can be synthesized by employing diastereoselective reduction of the ketone in the products. The formal synthesis of (+)-pancratistatin demonstrates the utility of the reaction.

Synthesis of organic carbamates as polyurethane raw materials from CO2: the quest for metal alkoxides as regenerable reagents.

It is well known that the utilization of carbon dioxide (CO2) for chemical materials is attracting research attention from the viewpoint of the carbon cycle. To contribute to the reduction of CO2 emission through such CO2 utilization reactions and counteract global climate change, the target compounds should be core chemical products that are distributed in large quantities and used for a long time. One such synthetic target is isocyanates that are used as raw materials for the production of polyurethanes, which are versatile polymeric materials with a service life of approximately 10 years. However, since direct synthesis of isocyanate from CO2 is quite difficult due to equilibrium constraints, a method via the use of its alcohol adduct, organic carbamate, as a precursor has been proposed. In this Perspective, we present regenerative metal alkoxide reactants, such as tin alkoxide, titanium alkoxide, and alkoxysilane, as environmentally benign reactants for the synthesis of organic carbamates from CO2. We also present a practical and environmentally friendly method for the highly efficient synthesis of various organic carbamates, including industrially important diisocyanate precursors, from 1 atm CO2 using alkoxysilanes. Furthermore, prospects for the practical application of these carbamate synthesis reactions are also discussed.

Heterolytic cleavage of a Si-H bond by a metal-ligand cooperation of a cationic iridium amido complex and hydrosilylation of aldehydes.

Heterolytic cleavage of a Si-H bond was achieved mediated by a metal-ligand cooperation of a cationic iridium amido complex. The reaction was applied to the catalytic hydrosilylation of benzaldehyde and its derivatives, affording the corresponding hydrosilylated products in moderate to good yields.

DNP NMR spectroscopy enabled direct characterization of polystyrene-supported catalyst species for synthesis of glycidyl esters by transesterification.

Polymer-supported catalysts have been of great interest in organic syntheses, but have suffered from the difficulty in obtaining direct structural information regarding the catalyst species embedded in the polymer due to the limitations of most analytical methods. Here, we show that dynamic nuclear polarization (DNP)-enhanced solid-state NMR is ideally positioned to characterize the ubiquitous cross-linked polystyrene (PS)-supported catalysts, thus enabling molecular-level understanding and rational development. Ammonium-based catalysts, which show excellent catalytic activity and reusability for the transesterification of methyl esters with glycidol, giving glycidyl esters in high yields, were successfully characterized by DNP 15N NMR spectroscopy at 15N natural abundance. DNP 15N NMR shows in particular that the decomposition of quaternary alkylammonium moieties to tertiary amines was completely suppressed during the catalytic reaction. Furthermore, the dilute ring-opened product derived from glycidol and NO3 - was directly characterized by DNP 15N CPMAS and 1H-15N and 1H-13C HETCOR NMR using a 15N enriched (NO3) sample, supporting the view that the transesterification mechanism involves an alkoxide anion derived from an epoxide and NO3 -. In addition, the detailed analysis of a used catalyst indicated that the adsorption of products on the cationic center is the major deactivation step in this catalysis.

A case of ischemic stroke accompanied by multiple arterial dissections associated with Klippel-Feil syndrome.

OBJECTIVES: To describe the case of an ischemic stroke patient with Klippel-Feil syndrome who developed multiple aneurysms and discuss the mechanism of aneurysm development. MATERIALS AND METHODS: A 44-year-old man presented with dizziness, left hemiparesis, and left-sided numbness and was admitted to our department. He developed multiple aneurysms at the bilateral vertebral artery (VA) and bilateral internal carotid artery. RESULTS: We diagnosed the etiology of his brain infarction as an embolic stroke caused by left VA dissection or the large thrombosed aneurysm. Furthermore, we considered that arterial dissection or Hox gene mutation was associated with the development of multiple aneurysms. CONCLUSION: While previous reports have described single aneurysm, this is the first report of multiple aneurysms associated with Klippel-Feil syndrome.

Design and assessment of an energy self-supply process producing tetraethyl orthosilicate using rice husk.

Combusting rice husk (RH) generates energy and rice husk ash (RHA) containing high amount of silica. Recent studies showed RHA can directly react with ethanol for producing tetraethyl orthosilicate (TEOS), an important substance for different industries. Nevertheless, this process requires an intensive energy supply. This study aims to design and evaluate an energy self-supply process producing TEOS using RH for feasibility. A process simulator was used to design the target process. The simulation results revealed that RH combustion can completely meet the RHA and high energy demands of TEOS production. The economic and environmental benefits were thoroughly evaluated and compared with processes using conventional raw materials (i.e., Simg and silica). The evaluation results showed that using RH for TEOS production could reduce CO2 emissions substantially. Large economic benefit was gained when renewable electricity was co-generated and sold to the power grid as a surplus.

Parallel-stacked aromatic molecules in hydrogen-bonded inorganic frameworks.

By precisely constructing molecules and assembling these into well-defined supramolecular structures, novel physical properties and functionalities can be realized, and new areas of the chemical space can be accessed. In both materials science and biology, a deeper understanding of the properties and exploitation of the reversible character of weak bonds and interactions, such as hydrogen bonds and π-π interactions, is anticipated to lead to the development of materials with novel properties and functionalities. We apply the hydrogen-bonded organic frameworks (HOFs) strategy to inorganic materials science using the cubic octamer of orthosilicic acid, [Si8O12][OH]8, as a building block, and find that various types of hydrogen-bonded inorganic frameworks (HIFs). We succeed in parallel π-stacking pure benzene, thiophene, selenophene, p-benzoquinone, thiophene·p-benzoquinone, and benzene·p-benzoquinone polymers infinitely. These polymers interact via their π-systems by taking advantage of the flexible pores of the three-dimensional nano-honeycomb HIFs, which consist of periodic wide and narrow segments.

Aerobic oxygenation of α-methylene ketones under visible-light catalysed by a CeNi3 complex with a macrocyclic tris(salen)-ligand.

A hetero-tetranuclear CeNi3 complex with a macrocyclic ligand catalysed the aerobic oxygenation of a methylene group adjacent to a carbonyl group under visible-light radiation to produce the corresponding α-diketones. The visible-light induced homolysis of the Ce-O bond of a bis(enolate) intermediate is proposed prior to aerobic oxygenation.

Computed tomography-guided partial-breast brachytherapy using implanted catheters as fiducial markers versus co-registered magnetic resonance imaging.

PURPOSE: Partial-breast irradiation (PBI) needs accurate cavity delineation with computed tomography (CT). In perioperative PBI using multicatheter-interstitial brachytherapy (MIB), catheters implanted during surgery were enabled as fiducial markers. Magnetic resonance imaging (MRI) can also assist delineation with CT. METHODS: Patients receiving MIB-PBI were analyzed. Cavity visualization scores (CVSs) were categorized with CT. With catheter-based delineation (CBD), the relationship between cavity boundaries and catheters were used to contour the tumor bed. Co-registered MRI delineation (CMD) was also performed. The correlation between cavity volume and the excised tissue weight was compared for the two techniques. RESULTS: The association between CVS and preoperative characteristics in 159 patients showed mammographic breast density (MBD) remained correlated to CVS on multiple regression analyses; CVS = 5.2-0.61 x MBD (p < 0.0001). In 43 patients, the cavity volumes determined with CBD vs CMD were 12.8 ±â€¯6.4 cm3 vs 16.1 ±â€¯12.4 cm3 (p < 0.0001), and their plots with excised weights showed the best fitting lines were 0.29 vs 0.48 (p < 0.0001), respectively. The correlation coefficients for CBD vs CMD were 0.65 vs 0.55 (p = 0.20) in low (CVS 1-3, n = 27) and 0.72 vs 0.58 (p = 0.36) in high visualized cavities (CVS 4-5, n = 16), respectively. CONCLUSIONS: The use of implanted catheters as fiducial markers was associated with smaller cavities and greater correlations with the excised tissue weights than co-registration with MRI. This might be a useful technique, especially for patients with dense breasts on mammography.

Numerical reproduction of dissolved U concentrations in a PO4-treated column study of Hanford 300 area sediment using a simple ion exchange and immobile domain model.

We succeeded at numerical reproduction of dissolved U concentrations from column experiments with PO4-treated Hanford 300 Area sediment using a simple ion exchange and immobile domain model. The time-series curves of dissolved U concentrations under various Darcy flow rate conditions were reproduced by the numerical model in the present study through optimization of the following parameters: the mass of U in mobile domain (on surface soil connected to the stream) to fit the starting U concentration at the column exit, and the rest of the total U was left as precipitation in immobile domain (isolated in deep soil); the mixing ratio between immobile and mobile domains, to fit the final recovering curve of concentration; and the cation exchange capacity (CECZp) and equilibrium constant (kZp) of the exchange reaction of UO22+ and H+ on simulated soil surface (Zp), to fit the transient equilibrium concentration, forming the bed of the bathtub curve. Numerical setting of no U in immobile domain or no mixing between immobile and mobile domains caused all U flushed out of the column exit, and setting of no CEC on Zp, formed no transient equilibrium concentration. The ion exchange immobile domain model is so common that it has become a standard process in the general-purpose geochemical program Phreeqc. Optimization of this model led to the development of the model presented here, which was capable of explaining the fluctuations in dissolved U concentration well and reproducing column experiments under various conditions.