RESUMEN
Emission factors (EFs) of gaseous pollutants, particulate matter, certain harmful trace elements, and polycyclic aromatic hydrocarbons (PAHs) from three thermal power plants (TPPs) and semi-industrial fluidized bed boiler (FBB) were compared. EFs of particulate matter, trace elements (except Cd and Pb), benzo[a]pyrene, and benzo[b]fluoranthene exceed the upper limits specified in the EMEP inventory guidebook for all combustion facilities. The comparison of trace elements and PAHs content in fly ashes (FAs) from lignite and coal waste combustion in TPPs and FBB, respectively, as well as the potential environmental impact of FAs disposal, was performed by employing a set of ecological indicators such as crustal enrichment factor, risk assessment code, risk indices for trace elements, and benzo[a]pyrene equivalent concentration for PAHs. Sequential analysis shows that the trace elements portion is the lowest for water-soluble and exchangeable fractions. The highest enrichment levels in FAs are noticed for As and Hg. Based on toxic trace elements content, FAs from TPPs represent a very high ecological risk, whereas fly ash from FBB poses a moderate ecological risk but has the highest benzo[a]pyrene equivalent concentration, indicating its increased carcinogenic potential. Lead isotope ratios for Serbian coals and FAs can contribute to a lead pollution global database.
RESUMEN
The comparison of fly ash generated from lignite combustion in a thermal power plant Kolubara A (Veliki Crljeni) and bottom and fly ash from coal waste combustion in a semi-industrial fluidized bed boiler (Vinca) was performed as the function of particle size. The average total concentrations of the 16 EPA priority PAHs in ash fractions are 0.49 mg kg-1 of ash (thermal power plant) and 17.48 mg kg-1 of ash (fluidized bed boiler). The sum of 3- and 4-ring PAHs accounts for more than 93% of overall PAHs concentration, and the most abundant among them is fluoranthene. The portions of PAHs groups defined based on their physico-chemical properties, as obtained from quantitative structure-activity relationship (QSAR) models included in the Vega platform, were determined. These portions, emission factors, and benzo[a]pyrene equivalence concentrations were further on used to estimate the potential environmental impact of ash disposal. The PAHs emission factors are higher compared to values in the air pollutant emission inventory guidebook of the cooperative program for monitoring and evaluation of the long-range transmission of air pollutants in Europe (EMEP/EEA). The overall emission factors of 16 PAHs for combustion of lignite and coal waste are determined to be 0.15 and 249.97 mg kg-1 of fuel, respectively. Based on the ratios of benzo[a]pyrene equivalence concentrations of each ash and correspondent fuel, the disposal of fly ash from the cyclone of fluidized bed boiler represents the highest risk to the environment among tested ashes.
Asunto(s)
Ceniza del Carbón/análisis , Hidrocarburos Policíclicos Aromáticos/análisis , Carbón Mineral/análisis , Europa (Continente) , Incineración , Centrales EléctricasRESUMEN
To estimate the oxidative potential (OP) of particulate matter (PM), two commonly used cell-free, molecular probes were applied: dithiothreitol (DTT) and dichloro-dihydro-fluorescein diacetate (DCFH-DA), and their performance was compared with 9,10-bis (phenylethynyl) anthracene-nitroxide (BPEAnit). To the best of our knowledge, this is the first study in which the performance of the DTT and DCFH has been compared with the BPEAnit probe. The average concentrations of PM, organic carbon (OC) and elemental carbon (EC) for fine (PM2.5) and coarse (PM10) particles were determined. The results were 44.8 ± 13.7, 9.8 ± 5.1 and 9.3 ± 4.8 µg·m-3 for PM2.5 and 75.5 ± 25.1, 16.3 ± 8.7 and 11.8 ± 5.3 µg·m-3 for PM10, respectively, for PM, OC and EC. The water-soluble organic carbon (WSOC) fraction accounted for 42 ± 14% and 28 ± 9% of organic carbon in PM2.5 and PM10, respectively. The average volume normalized OP values for the three assays depended on both the sampling periods and the PM fractions. The OPBPEAnit had its peak at 2 p.m.; in the afternoon, it was three times higher compared to the morning and late afternoon values. The DCFH and BPEAnit results were correlated (r = 0.64), while there was no good agreement between the BPEAnit and the DTT (r = 0.14). The total organic content of PM does not necessarily represent oxidative capacity and it shows varying correlation with the OP. With respect to the two PM fractions studied, the OP was mostly associated with smaller particles.
Asunto(s)
Contaminantes Atmosféricos/análisis , Monitoreo del Ambiente/métodos , Oxidación-Reducción , Material Particulado/análisis , Contaminantes Atmosféricos/química , Alquinos , Antracenos , Carbono/análisis , Ditiotreitol/química , Fluoresceínas/química , Estrés Oxidativo , Tamaño de la Partícula , Material Particulado/químicaRESUMEN
UV-C irradiation is widely used in the food industry. However, the health effects from dietary exposure to the irradiated pesticide residues retained in foodstuffs are underestimated. In this study, technical chlorpyrifos (TCPF) and its oil in water (EW) and emulsifiable concentrate (EC) formulations were irradiated by UV-C, and their photodegradation products were subjected to toxicity assessment, including determination of acetylcholinesterase (AChE) activity, genotoxicity and oxidative stress using human blood cells as a model system. Toxicity studies were performed using the chlorpyrifos concentrations in the range of those proposed as the maximum residue levels in plant commodities. TCPF, EW and EC photodegradation products induced DNA damage and oxidative stress, and their genotoxicity did not decrease as a function of irradiation time. Irradiated TCPF and EC are more potent AChE inhibitors than irradiated EW. Accordingly, the application of UV-C irradiation must be considered when processing the plants previously treated with chlorpyrifos formulations.