RESUMEN
Lithium (Li) metal batteries (LMBs) have garnered significant research attention due to their high energy density. However, uncontrolled Li dendrite growth and the continuous accumulation of "dead Li" directly lead to poor electrochemical performance in LMBs, along with serious safety hazards. These issues have severely hindered their commercialization. In this study, a lithiophilic layer of Sn-Cu2O is constructed on the surface of copper foam (CF) grown with Cu nanowire arrays (SCCF) through a combination of electrodeposition and plasma reduction. Sn-Cu2O, with excellent lithiophilicity, reduces the Li nucleation barrier and promotes uniform Li deposition. Simultaneously, the high surface area of the nanowires reduces the local current density, further suppressing the Li dendrite growth. Therefore, at 1 mA cm-2, the half cells and symmetric cells achieve high Coulombic efficiency (CE) and stable operation for over 410 cycles and run smoothly for more than 1350 h. The full cells using an LFP cathode demonstrate a capacity retention rate of 90.6% after 1000 cycles at 5 C, with a CE as high as 99.79%, suggesting excellent prospects for rapid charging and discharging and long-term cyclability. This study provides a strategy for modifying three-dimensional current collectors for Li metal anodes, offering insights into the construction of stable, safe, and fast-charging LMBs.
RESUMEN
La2O3 nanoparticles stabilized on carbon nanoflake (CNF) matrix were synthesized and graphitized to produce core-shell structures La2O3/CNFs@C. Further oxidation of these structures by nitric acid vapors for 1, 3 or 6 h was performed, and surface-oxidized particles La2O3/CNFs@C_x (x = 1, 3, 6) were produced. Bulk and surface compositions of La2O3/CNFs@C and La2O3/CNFs@C_x were investigated by thermogravimetric analysis and X-ray photoelectron spectroscopy. With increasing the duration of oxidation, the oxygen and La2O3 content in the La2O3/CNFs@C_x samples increased. The electronic structures of samples were assessed by electron paramagnetic resonance. Two paramagnetic centers were associated with unpaired localized and mobile electrons and were registered in all samples. The correlation between bulk and surface compositions of the samples and their electronic structures was investigated for the first time. The impact of the ratio between sp2- and sp3-hybridized C atoms, the number and nature of oxygen-containing groups on the surface and the presence and proportion of coordinated La atoms on the EPR spectra was demonstrated.
RESUMEN
The possibility of doping ZnO in its metastable rock salt structure with Li, Na, and K intended to act as acceptor dopants was investigated. For the first time, MgxZn1-xO alloys and pure ZnO with a rock salt structure doped with Li, Na, and K metals was obtained by high-pressure synthesis from pure oxides with the addition of carbonates or acetates of the corresponding metals as dopant sources. Successful stabilization of the metastable rock salt structure and phase purity were confirmed by X-ray diffraction. Transmission electron microscopy was used to study the particle size of nanocrystalline precursors, while the presence of Li, Na, and K metals in rock salt ZnO was detected by electron energy-loss spectroscopy and X-ray photoelectron spectroscopy in MgxZn1-xO alloys. Electron paramagnetic resonance measurements revealed the acceptor behavior of Li, Na, and K dopants based on the influence of the latter on native defects and natural impurities in ZnO-MgO alloys. In addition, diffuse reflectance spectroscopy was used to derive band gaps of quenched rock salt ZnO and its alloys with MgO.
RESUMEN
An ionic liquid (IL) 1-ethyl, 2-methyl imidazolium thiocyanate incorporated biopolymer system is reported in this communication for applications in dual energy devices, i.e., electric double-layer capacitors (EDLCs) and dye-sensitized solar cells (DSSCs). The solution caste method has been used to synthesize ionic-liquid-incorporated biopolymer electrolyte films. The IL mixed biopolymer electrolytes achieve high ionic conductivity up to the order of 10-3 S/cm with good thermal stability above 250 °C. Electrical, structural, and optical studies of these IL-doped biopolymer electrolyte films are presented in detail. The performance of EDLCs was evaluated using low-frequency electrochemical impedance spectroscopy, cyclic voltammetry, and constant current charge-discharge, while that of DSSCs was assessed using J-V characteristics. The EDLC cells exhibited a high specific capacitance of 200 F/gram, while DSSCs delivered 1.53% efficiency under sun conditions.
Asunto(s)
Líquidos Iónicos , Líquidos Iónicos/química , Colorantes/química , Electrólitos/química , Iones , BiopolímerosRESUMEN
Molecular design, synthesis, in vitro and in vivo studies of novel derivatives of indole-3-carboxylic acid new series of angiotensin II receptor 1 antagonists is presented. Radioligand binding studies using [125I]-angiotensin II displayed that new derivatives of indole-3-carboxylic acid have a high nanomolar affinity for the angiotensin II receptor (AT1 subtype) on a par with the known pharmaceuticals such as losartan. Biological studies of synthesized compounds in spontaneously hypertensive rats have demonstrated that compounds can lower blood pressure when administered orally. Maximum the decrease in blood pressure was 48 mm Hg with oral administration of 10 mg/kg and antihypertensive effect was observed for 24 h, which is superior to losartan.
Asunto(s)
Antihipertensivos , Hipertensión , Ratas , Animales , Antihipertensivos/farmacología , Antihipertensivos/uso terapéutico , Losartán/farmacología , Hipertensión/tratamiento farmacológico , Antagonistas de Receptores de Angiotensina/química , Antagonistas de Receptores de Angiotensina/farmacología , Presión Sanguínea , Ratas Endogámicas SHR , Receptores de Angiotensina/metabolismo , Angiotensina II/farmacología , Tetrazoles/química , Compuestos de Bifenilo/químicaRESUMEN
The subject of the current research study is aimed at the development of novel types of contrast agents (CAs) for multi-energy computed tomography (CT) based on Ln-graphene composites, which include Ln (Ln = La, Nd, and Gd) nanoparticles with a size of 2-3 nm, acting as key contrasting elements, and graphene nanoflakes (GNFs) acting as the matrix. The synthesis and surface modifications of the GNFs and the properties of the new CAs are presented herein. The samples have had their characteristics determined using X-ray photoelectron spectroscopy, X-Ray diffraction, transmission electron microscopy, thermogravimetric analysis, and Raman spectroscopy. Multi-energy CT images of the La-, Nd-, and Gd-based CAs demonstrating their visualization and discriminative properties, as well as the possibility of a quantitative analysis, are presented.
RESUMEN
Transformation of carbon oxides into valuable feedstocks is an important challenge nowadays. Carbon oxide hydrogenation to hydrocarbons over iron-based catalysts is one of the possible ways for this transformation to occur. Carbon supports effectively increase the dispersion of such catalysts but possess a very low bulk density, and their powders can be toxic. In this study, spark plasma sintering was used to synthesize new bulk and dense potassium promoted iron-based catalysts, supported on N-doped carbon nanomaterials, for hydrocarbon synthesis from syngas. The sintered catalysts showed high activity of up to 223 µmolCO/gFe/s at 300-340 °C and a selectivity to C5+ fraction of ~70% with a high portion of olefins. The promising catalyst performance was ascribed to the high dispersity of iron carbide particles, potassium promotion of iron carbide formation and stabilization of the active sites with nitrogen-based functionalities. As a result, a bulk N-doped carbon-supported iron catalyst with 3D structure was prepared, for the first time, by a fast method, and demonstrated high activity and selectivity in hydrocarbon synthesis. The proposed technique can be used to produce well-shaped carbon-supported catalysts for syngas conversion.
RESUMEN
Although birnessite-type manganese dioxide (δ-MnO2 ) with a large interlayer spacing (≈7 Å) is a promising cathode candidate for aqueous Zn/MnO2 batteries, the poor structural stability associated with Zn2+ intercalation/deintercalation limits its further practical application. Herein, δ-MnO2 ultrathin nanosheets are coupled with reduced graphene oxide (rGO) via van der Waals (vdW) self-assembly in a vacuum freeze-drying process. It is interesting to find that the presence of vdW interaction between δ-MnO2 and rGO can effectively suppress the layered-to-spinel phase transition in δ-MnO2 during cycling. As a result, the coupled δ-MnO2 /rGO hybrid cathode with a sandwich-like heterostructure exhibits remarkable cycle performance with 80.1% capacity retained after 3000 cycles at 2.0 A g-1 . The first principle calculations demonstrate that the strong interfacial interaction between δ-MnO2 and rGO results in improved electron transfer and strengthened layered structure for δ-MnO2 . This work establishes a viable strategy to mitigate the adverse layered-to-spinel phase transition in layered manganese oxide in aqueous energy storage systems.
RESUMEN
Ultrasonic approach to the synthesis of the first selenium-containing derivatives of chitin and chitosan has been developed. The synthetic procedure is simple, provides high yields, does not require harsh conditions, and uses water as the reaction medium. The elaborated chitin and chitosan derivatives and their based nanoparticles are non-toxic and possess high antibacterial and antifungal activity. Their antimicrobial activity exceeds the effect of the classic antibiotics (Ampicillin and Gentamicin) and the antifungal drug Amphotericin B. The obtained selenium-containing cationic chitin and chitosan derivatives exhibit a high transfection activity and are promising gene delivery vectors. Nanoparticles of the synthesized polymers are highly efficient catalysts for the oxidation of 1-phenylethyl alcohol to acetophenone by bromine at room temperature.
Asunto(s)
Quitosano , Selenio , Antibacterianos/farmacología , Antifúngicos/farmacología , Catálisis , QuitinaRESUMEN
The electrocatalytic nitrogen reduction reaction (NRR), an alternative method of nitrogen fixation and conversion under ambient conditions, represents a promising strategy for tackling the energy-intensive issue. The design of high-performance electrocatalysts is one of the key issues to realizing the application of NRR, but most of the current catalysts rely on the use of crystalline materials, and shortcomings such as a limited number of catalytic active sites and sluggish reaction kinetics arise. Herein, an amorphous metal oxide catalyst H-CrOx/C-550 with hierarchically porous structure is constructed, which shows superior electrocatalytic performance toward NRR under ambient conditions (yield of 19.10 µg h-1 mgcat-1 and Faradaic efficiency of 1.4% at -0.7 V vs a reversible hydrogen electrode, higher than that of crystalline Cr2O3 and solid counterparts). Notably, the amorphous metal oxide obtained by controlled pyrolysis of metal-organic frameworks (MOFs) possess abundant unsaturated catalytic sites and optimized conductivity due to the controllable degree of metal-oxygen bond reconstruction and the doping of carbon materials derived from organic ligands. This work demonstrates MOF-derived porous amorphous materials as a viable alternative to current electrocatalysts for NH3 synthesis at ambient conditions.
RESUMEN
The hydroamination of alkynes is an atom-economy process in the organic synthesis for the C-N bond formation, thereby allowing the production of fine chemicals and intermediates. However, direct interaction between alkynes and amines is complicated due to the electron enrichment of both compounds. Therefore, efficient hydroamination catalysts, especially heterogeneous ones, are in great demand. This work aimed at the development of novel heterogeneous catalysts based on zeolite-like metal-organic frameworks for phenylacetylene hydroamination. The sodalite (SOD) type zeolitic imidazolate framework ZIF-67 (Co(meim)2, meim = 2-methylimidazolate) and boron imidazolate framework BIF-66 ({Co[B(im)4]2}n, im = imidazolate) were studied as the carriers for the gold nanoparticles (Au-NPs). Au-NPs were embedded in the ZIF-67 and BIF-66 matrices by incipient wetness impregnation. Au@ZIF-67 and Au@BIF-66 hybrids were studied for the first time in the liquid phase hydroamination of phenylacetylene with aniline in an air atmosphere and have shown high activity and selectivity in respect to imine in this process. The pronounced impact of the nature of the metal-organic carrier, Au source, and reducing agent on the catalytic performance of the synthesized nanomaterials was found. To the best of our knowledge, it is the first example of using the zeolitic imidazolate framework and boron-imidazolate framework as the components of the gold-containing catalytic systems for the alkyne hydroamination.
RESUMEN
The electrical conductivity, density and diffusion coefficients of trihexyl(tetradecyl)phosphonium bis(trifluoromethylsulfonyl)amide ([P66614][NTf2]) ionic liquid and its binary solutions in acetonitrile, propionitrile, dimethyl and diethyl carbonates were measured in the temperature range of 293-348 K. The electrical conductivity - ionic liquid mole fraction dependencies for the binary solutions were fitted with the empirical Casteel-Amis equation. The temperature dependencies of electrical conductivity were analyzed using the Arrhenius, Litovitz and Vogel-Fulcher-Tammann approaches. The dependences of the Arrhenius activation energy and pre-exponential factor on the mole fraction of ionic liquid in the solutions were fitted with the empirical equations proposed in the literature. The thermo-gravimetric analysis combined with mass spectrometry demonstrated the high thermal stability of [P66614][NTf2] up to 600 K. At higher temperatures the decomposition of [P66614][NTf2] proceeded via the elimination of alkyl radicals as a result of the nucleophilic attack of reactive intermediates to the [P66614]+ cation with the formation of trialkylphosphines. The activation energies of the thermal destruction of [P66614][NTf2] were calculated using the Kissinger equation and non-linear integral isoconversional model.
RESUMEN
Here we report formation of gold nanoparticles (GNPs) in micelles of polytyrosine-PEG copolymers that combine the properties of a reducer and a stabilizer. The size and properties of the GNPs were tailored by the excess chloroaurate over the copolymer. The latter quickly formed non-covalent complexes with HAuCl4 and then slowly reduced it to form GNPs. 3 Tyr residues are consumed by reduction of one mole of chloroaurate. The size of the GNPs was controlled by the [Tyr]/[Au(iii)] molar ratio. Small GNPs with D â 8 nm were formed at [Tyr]/[Au(iii)] = 0.5-1.5. 90% of these small GNPs remained bound to the copolymer and could be stored in a lyophilized state. Such polypeptide-gold hybrid materials produced at [Tyr]/[Au(iii)] = 0.5 demonstrated high activity in the catalytic reduction of 4-nitrophenol by sodium borohydride. [Tyr]/[Au(iii)] = 5 led to the formation of large nanoplates (D â 30-60 nm). Thus, in the polymer-based system the GNP size grew in line with the excess of the reducing agent in contrast to Turkevich synthesis of GNPs with citric acid, which also combines the functions of a stabilizer and a reducer. The difference results from the reduction of HAuCl4 in solution according to the Turkevich method and in the micelles of the amphiphilic polymer where the seed growth is limited by the amount of neighboring reducer.
RESUMEN
Composite polymer electrolytes provide an emerging solution for new battery development by replacing liquid electrolytes, which are commonly complexes of polyethylene oxide (PEO) with ceramic fillers. However, the agglomeration of fillers and weak interaction restrict their conductivities. By contrast with the prevailing methods of blending preformed ceramic fillers within the polymer matrix, here we proposed an in situ synthesis method of SiO2 nanoparticles in the PEO matrix. In this case, robust chemical interactions between SiO2 nanoparticles, lithium salt and PEO chains were induced by the in situ non-hydrolytic sol gel process. The in situ synthesized nanocomposite polymer electrolyte delivered an impressive ionic conductivity of ~1.1 × 10-4 S cm-1 at 30 °C, which is two orders of magnitude higher than that of the preformed synthesized composite polymer electrolyte. In addition, an extended electrochemical window of up to 5 V vs. Li/Li+ was achieved. The Li/nanocomposite polymer electrolyte/Li symmetric cell demonstrated a stable long-term cycling performance of over 700 h at 0.01-0.1 mA cm-2 without short circuiting. The all-solid-state battery consisting of the nanocomposite polymer electrolyte, Li metal and LiFePO4 provides a discharge capacity of 123.5 mAh g-1, a Coulombic efficiency above 99% and a good capacity retention of 70% after 100 cycles.
RESUMEN
Adsorption of model polar (water) and non-polar (n-hexane) compounds on the surface of oxidized and non-oxidized carbon nanotube (CNT) supports at different stages of Co/CNT catalyst preparation has been studied to reveal the influence of the surface functionalization of the CNT support on the catalyst selectivity in Fischer-Tropsch synthesis (FTS). Dynamic vapor sorption experiments showed that defunctionalization of the surface of the CNT support during catalyst annealing and reduction led to its hydrophobization and, as a result, no noticeable difference was observed between the adsorption properties of the oxidized and non-oxidized supports towards water and hydrocarbons. Therefore, oxidation of the CNT support does not significantly affect the adsorption properties of the supported catalyst and it is not a crucial factor for the catalyst selectivity in FTS.
RESUMEN
Thermal defunctionalization of oxidized jellyfish-like few-layer graphene nanoflakes was studied under non-isothermal conditions by simultaneous thermal analysis. Activation energies for thermal decomposition of different oxygen functional groups were calculated by the Kissinger method and compared with those for oxidized carbon nanotubes. Oxygen content in graphene nanoflakes was found to significantly affect the decomposition activation energies of carboxylic and keto/hydroxy acids because of their acceptor properties and strong distortion of the graphene layers at the edges of the nanoflakes. The structure of the carbon material and the oxygen chemical state significantly influence the decomposition kinetics of thermally stable oxygen-containing groups. The activation energy for thermal decomposition of phenol groups (110-150 kJ mol-1) is close to that for graphene oxide reduction.
RESUMEN
3D frameworks of carbon nanotubes (CNTs) uniformly decorated by cobalt oxide or carbon-encapsulated cobalt nanoparticles were obtained by spark plasma sintering for the first time. The influence of the sintering temperature ( TS) and Co content on the morphology, structure, and electrical and magnetic properties of the obtained materials was investigated by Raman spectroscopy, electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and in situ magnetometry. It was shown that application of the SPS technique allowed simultaneous compaction of the material, formation of CNT framework, and Co oxide reduction. The appearance of the carbon shell around 4-10 nm Co particles was observed at TS > 600 °C. At higher TS, the Co particle size increased (up to 300 nm at 1400 °C), whereas the carbon shell ordered and thickened. The formation of large-size few-layers graphene sheets was observed at TS = 1400 °C. Electrical conductivity of the composites was found to be higher than that of sintered pristine CNTs and varied in the range of 500-12 500 Sm/m. Magnetic experiments demonstrated soft magnetization of the samples and the coercivity of 200-300 Oe. Thus, the obtained CNT-based material is simultaneously compact, formable, electroconductive, and ferromagnetic. Its properties can be tuned by variation of the sintering parameters. Synthesized cobalt-modified carbon 3D structures are promising for the application in magnetic separation, catalysis, fuel cells, and electromagnetic shielding.
RESUMEN
Although the theoretical capacitance of MnO2 is 1370 F g-1 based on the Mn3+/Mn4+ redox couple, most of the reported capacitances in literature are far below the theoretical value even when the material goes to nanoscale. To understand this discrepancy, in this work, the electrochemical behavior and charge storage mechanism of K+-inserted α-MnO2 (or KxMnO2) nanorod arrays in broad potential windows are investigated. It is found that electrochemical behavior of KxMnO2 is highly dependent on the potential window. During cyclic voltammetry cycling in a broad potential window, K+ ions can be replaced by Na+ ions, which determines the pseudocapacitance of the electrode. The K+ or Na+ ions cannot be fully extracted when the upper cutoff potential is less than 1 V vs Ag/AgCl, which retards the release of full capacitance. As the cyclic voltammetry potential window is extended to 0-1.2 V, enhanced specific capacitance can be obtained with the emerging of new redox peaks. In contrast, the K+-free α-MnO2 nanorod arrays show no redox peaks in the same potential window together with much lower specific capacitance. This work provides new insights on understanding the charge storage mechanism of MnO2 and new strategy to further improve the specific capacitance of MnO2-based electrodes.
RESUMEN
The abundant reserve and low cost of sodium have provoked tremendous evolution of Na-ion batteries (SIBs) in the past few years, but their performances are still limited by either the specific capacity or rate capability. Attempts to pursue high rate ability with maintained high capacity in a single electrode remains even more challenging. Here, an elaborate self-branched 2D SnS2 (B-SnS2) nanoarray electrode is designed by a facile hot bath method for Na storage. This interesting electrode exhibits areal reversible capacity of ca. 3.7 mAh cm-2 (900 mAh g-1) and rate capability of 1.6 mAh cm-2 (400 mAh g-1) at 40 mA cm-2 (10 A g-1). Improved extrinsic pseudocapacitive contribution is demonstrated as the origin of fast kinetics of an alloying-based SnS2 electrode. Sodiation dynamics analysis based on first-principles calculations, ex-situ HRTEM, in situ impedance, and in situ Raman technologies verify the S-edge effect on the fast Na+ migration and reversible and sensitive structure evolution during high-rate charge/discharge. The excellent alloying-based pseudocapacitance and unsaturated edge effect enabled by self-branched surface nanoengineering could be a promising strategy for promoting development of SIBs with both high capacity and high rate response.
RESUMEN
Sodium-ion batteries are a potentially low-cost and safe alternative to the prevailing lithium-ion battery technology. However, it is a great challenge to achieve fast charging and high power density for most sodium-ion electrodes because of the sluggish sodiation kinetics. Here we demonstrate a high-capacity and high-rate sodium-ion anode based on ultrathin layered tin(II) sulfide nanostructures, in which a maximized extrinsic pseudocapacitance contribution is identified and verified by kinetics analysis. The graphene foam supported tin(II) sulfide nanoarray anode delivers a high reversible capacity of â¼1,100 mAh g(-1) at 30 mA g(-1) and â¼420 mAh g(-1) at 30 A g(-1), which even outperforms its lithium-ion storage performance. The surface-dominated redox reaction rendered by our tailored ultrathin tin(II) sulfide nanostructures may also work in other layered materials for high-performance sodium-ion storage.