Nanobody engineering for SARS-CoV-2 neutralization and detection.

In response to the ongoing COVID-19 pandemic, the quest for coronavirus inhibitors has inspired research on a variety of small proteins beyond conventional antibodies, including robust single-domain antibody fragments, i.e., "nanobodies." Here, we explore the potential of nanobody engineering in the development of antivirals and diagnostic tools. Through fusion of nanobody domains that target distinct binding sites, we engineered multimodular nanobody constructs that neutralize wild-type SARS-CoV-2 and the Alpha and Delta variants at high potency, with IC50 values as low as 50 pM. Despite simultaneous binding to distinct epitopes, Beta and Omicron variants were more resistant to neutralization by the multimodular nanobodies, which highlights the importance of accounting for antigenic drift in the design of biologics. To further explore the applications of nanobody engineering in outbreak management, we present an assay based on fusions of nanobodies with fragments of NanoLuc luciferase that can detect sub-nanomolar quantities of the SARS-CoV-2 spike protein in a single step. Our work showcases the potential of nanobody engineering to combat emerging infectious diseases. IMPORTANCE: Nanobodies, small protein binders derived from the camelid antibody, are highly potent inhibitors of respiratory viruses that offer several advantages over conventional antibodies as candidates for specific therapies, including high stability and low production costs. In this work, we leverage the unique properties of nanobodies and apply them as building blocks for new therapeutic and diagnostic tools. We report ultra-potent SARS-CoV-2 inhibition by engineered nanobodies comprising multiple modules in structure-guided combinations and develop nanobodies that carry signal molecules, allowing rapid detection of the SARS-CoV-2 spike protein. Our results highlight the potential of engineered nanobodies in the development of effective countermeasures, both therapeutic and diagnostic, to manage outbreaks of emerging viruses.

Array-In-Well Epitope Mapping of Phage-Displayed Antibodies.

Novel affinity reagents, such as single chain (scFv) antibody fragments, can be generated by isolating them from recombinant protein libraries using phage display selection. A successful selection process against a target protein can produce a number of binder candidates among which the desired binders are identified by screening and characterization of individual clones. Obtaining information on the binding properties, such as the binding epitope, already during the screening step helps to choose the most useful candidates for further development at early phase saving time and resources. To this end, we describe here an Array-in-Well-based screening procedure to perform activity testing and epitope mapping for filamentous phage-displayed scFvs in an integrated manner with a single assay.

Real-time wash-free detection of unlabeled PNA-DNA hybridization using discrete FET sensor.

We demonstrate an electrochemical sensor for detection of unlabeled single-stranded DNA using peptide nucleic acid (PNA) probes coupled to the field-effect transistor (FET) gate. The label-free detection relies on the intrinsic charge of the DNA backbone. Similar detection schemes have mainly concentrated on sensitivity improvement with an emphasis on new sensor structures. Our approach focuses on using an extended-gate that separates the FET and the sensing electrode yielding a simple and mass fabricable device. We used PNA probes for efficient hybridization in low salt conditions that is required to avoid the counter ion screening. As a result, significant part of the target DNA lies within the screening length of the sensor. With this, we achieved a wash-free detection where  typical gate potential shifts are more than 70 mV with 1 µM target DNA. We routinely obtained a real-time, label- and wash-free specific detection of target DNA in nanomolar concentration with low-cost electronics and the responses were achieved within minutes after introducing targets to the solution. Furthermore, the results suggest that the sensor performance is limited by specificity rather than by sensitivity and using low-cost electronics does not limit the sensor performance in the presented sensor configuration.

Array-in-well binding assay for multiparameter screening of phage displayed antibodies.

Phage display is a well-established and powerful tool for the development of recombinant antibodies. In a standard phage display selection process using a high quality antibody phage library, a large number of unique antibody clones can be generated in short time. However, the pace of the antibody discovery project eventually depends on the methodologies used in the next screening phase to identify the clones with the most promising binding characteristics e.g., in terms of specificity, affinity and epitope. Here, we report an array-in-well binding assay, a miniaturized and multiplexed immunoassay that integrates the epitope mapping to the evaluation of the binding activity of phage displayed antibody fragments in a single well. The array-in-well assay design used here incorporates a set of partially overlapping 15-mer peptides covering the complete primary sequence of the target antigen, the intact antigen itself and appropriate controls printed as an array with 10×10 layout at the bottom of a well of a 96-well microtiter plate. The streptavidin-coated surface of the well facilitates the immobilization of the biotinylated analytes as well-confined spots. Phage displayed antibody fragments bound to the analyte spots are traced using anti-phage antibody labelled with horseradish peroxidase for tyramide signal amplification based highly sensitive detection. In this study, we generated scFv antibodies against HIV-1 p24 protein using a synthetic antibody phage library, evaluated the binders with array-in-well binding assay and further classified them into epitopic families based on their capacity to recognize linear epitopes. The array-in-well assay enables the integration of epitope mapping to the screening assay for early classification of antibodies with simplicity and speed of a standard ELISA procedure to advance the antibody development projects.

Array-in-well platform-based multiplex assay for the simultaneous detection of anti-HIV- and treponemal-antibodies, and Hepatitis B surface antigen.

Multiplex assays detecting sets of related clinical analytes simultaneously can save considerable amount of time and resources. Array-in-well (AIW) is a powerful platform for the multiplex detection of different analytes where microarrays can be printed at the bottom of microtiter wells, thus combining the potential of microarrays with the ease of handling microtiter wells. We have developed a single-step AIW assay for the simultaneous screening of HIV, Treponema pallidum subspecies pallidum (causing syphilis) and Hepatitis B virus infections targeting the specific detection of anti-HIV- and treponemal-antibodies and Hepatitis B surface antigen (HBsAg), respectively, using two different fluorescent label technologies i.e. DyLight 633 and europium nanoparticle. Double-antigen assay formats were used for anti-HIV- and treponemal-antibody detection that can simultaneously detect both IgG and IgM, and thus reduce the window period of detection. AIW assay was evaluated with well characterized serum/plasma samples (n=111), and the qualitative results were in near complete agreement with those of the reference assays. The AIW assay exhibited 100% sensitivities for all three analytes, and 100% specificities for anti-HIV antibodies and HBsAg, and 98.6% specificity for treponemal antibodies. The limit of detection of HBsAg in AIW assay was 0.18 ng/ml. This high performing AIW assay has the potential to be used as a multiplex screening test for these three infections.

Quantitative multianalyte microarray immunoassay utilizing upconverting phosphor technology.

A quantitative multianalyte immunoassay utilizing luminescent upconverting single-crystal nanoparticles as reporters on an antibody array-in-well platform was demonstrated. Upconverting nanoparticles are inorganic rare earth doped materials that have the unique feature of converting low energy infrared radiation into higher energy visible light. Autofluorescence, commonly limiting the sensitivity of fluorescence-based assays, can be completely eliminated with photon upconversion technology because the phenomenon does not occur in biological materials. Biotinylated antibodies for three analytes (prostate specific antigen, thyroid stimulating hormone, and luteinizing hormone) were printed in an array format onto the bottom of streptavidin-coated microtiter wells. Analyte dilutions were added to the wells, and the analytes were detected with antibody-coated upconverting nanoparticles. Binding of the upconverting nanoparticles was imaged with an anti-Stokes photoluminescence microwell imager, and the standard curves for each analyte were quantified from the selected spot areas of the images. Single analyte and reference assays were also carried out to compare with the results of the multianalyte assay. Multiplexing did not have an effect on the assay performance. This study demonstrates the feasibility of upconverting single-crystal nanoparticles for imaging-based detection of quantitative multianalyte assays.

A cell spot microarray method for production of high density siRNA transfection microarrays.

BACKGROUND: High-throughput RNAi screening is widely applied in biological research, but remains expensive, infrastructure-intensive and conversion of many assays to HTS applications in microplate format is not feasible. RESULTS: Here, we describe the optimization of a miniaturized cell spot microarray (CSMA) method, which facilitates utilization of the transfection microarray technique for disparate RNAi analyses. To promote rapid adaptation of the method, the concept has been tested with a panel of 92 adherent cell types, including primary human cells. We demonstrate the method in the systematic screening of 492 GPCR coding genes for impact on growth and survival of cultured human prostate cancer cells. CONCLUSIONS: The CSMA method facilitates reproducible preparation of highly parallel cell microarrays for large-scale gene knockdown analyses. This will be critical towards expanding the cell based functional genetic screens to include more RNAi constructs, allow combinatorial RNAi analyses, multi-parametric phenotypic readouts or comparative analysis of many different cell types.

Oligonucleotide array-in-well platform for detection and genotyping human adenoviruses by utilizing upconverting phosphor label technology.

We have developed a robust array-in-well test platform based on an oligonucleotide array, combining advantages of simple instrumentation and new upconverting phosphor reporter technology. Upconverting inorganic lanthanide phosphors have a unique property of photoluminescence emission at visible wavelengths under near-infrared excitation. No autofluorescence is produced from the sample or support material, enabling a highly sensitive assay. In this study, the assay is performed in standard 96-well microtiter plates, making the technique easily adaptable to high-throughput analysis. The oligonucleotide array-in-well assay is employed to detect a selection of ten common adenovirus genotypes causing human infections. The study provides a demonstration of the advantages and potential of the upconverting phosphor-based reporter technology in multianalyte assays and anti-Stokes photoluminescence detection with an anti-Stokes photoluminescence imaging device.

Spatio-temporal composition of the mitotic Chromosomal Passenger Complex detected using in situ proximity ligation assay.

Cell division is orchestrated by a complex protein network that aims to maintenance of genomic stability. Visualisation of mitotic protein-protein associations in space and time has been limited due to the lack of proper biochemical and easy-to-use imaging tools. Here we report adaptation of the in situ proximity ligation assay (is-PLA) to study mitotic protein interactions with spatio-temporal resolution. We examined the composition of the Chromosomal Passenger Complex (CPC) at various mitotic phases and after chemical treatments using is-PLA with antibodies against the core CPC subunits Aurora B, INCENP, Survivin and Borealin. Our results support the notion that the core CPC functions as a single structural unit at centromeres in early mitosis and at central spindle after the onset of anaphase. Treatment of cells with the Aurora B inhibitor ZM447439 diminished the is-PLA signals at centromeres suggesting that Aurora B activity contributes to structural maintenance and/or proper subcellular localization of the core CPC. Is-PLA-based analysis of interaction between INCENP and Polo-like kinase 1 (Plk1) proposes that the kinase co-travels with CPC during late mitosis. The data illustrates both the strengths and limitations of the is-PLA in the analysis of mitotic macromolecule associations at sub-organelle level.

Integrative functional genomics analysis of sustained polyploidy phenotypes in breast cancer cells identifies an oncogenic profile for GINS2.

Aneuploidy is among the most obvious differences between normal and cancer cells. However, mechanisms contributing to development and maintenance of aneuploid cell growth are diverse and incompletely understood. Functional genomics analyses have shown that aneuploidy in cancer cells is correlated with diffuse gene expression signatures and aneuploidy can arise by a variety of mechanisms, including cytokinesis failures, DNA endoreplication, and possibly through polyploid intermediate states. To identify molecular processes contributing to development of aneuploidy, we used a cell spot microarray technique to identify genes inducing polyploidy and/or allowing maintenance of polyploid cell growth in breast cancer cells. Of 5760 human genes screened, 177 were found to induce severe DNA content alterations on prolonged transient silencing. Association with response to DNA damage stimulus and DNA repair was found to be the most enriched cellular processes among the candidate genes. Functional validation analysis of these genes highlighted GINS2 as the highest ranking candidate inducing polyploidy, accumulation of endogenous DNA damage, and impairing cell proliferation on inhibition. The cell growth inhibition and induction of polyploidy by suppression of GINS2 was verified in a panel of breast cancer cell lines. Bioinformatic analysis of published gene expression and DNA copy number studies of clinical breast tumors suggested GINS2 to be associated with the aggressive characteristics of a subgroup of breast cancers in vivo. In addition, nuclear GINS2 protein levels distinguished actively proliferating cancer cells suggesting potential use of GINS2 staining as a biomarker of cell proliferation as well as a potential therapeutic target.

ProteomeBinders: planning a European resource of affinity reagents for analysis of the human proteome.

ProteomeBinders is a new European consortium aiming to establish a comprehensive resource of well-characterized affinity reagents, including but not limited to antibodies, for analysis of the human proteome. Given the huge diversity of the proteome, the scale of the project is potentially immense but nevertheless feasible in the context of a pan-European or even worldwide coordination.

Antibody microarrays using resonance light-scattering particles for detection.

Antibody microarray measurements show great potential for the simultaneous quantification of many proteins in small amounts of body fluids and extracts. Over the last few years, a micro-array platform centered around the concept of microarrays in microtiter wells was developed, and for the best assays we have achieved lower limits of detection in the femtomolar range using resonance light-scattering particles for the staining of biotinylated detection antibodies. Although conceptually simple, these multiplexed sandwich assays are technically challenging. Here we describe in detail our protocols and procedures for the manufacturing of antibody microarrays with up to 48 different antibodies and for performing plasma measurements.

Human Protein Atlas charts a diverse terrain.

A complete set of high-quality antibodies against the human proteome would constitute a remarkable resource for the analysis of protein abundances in tissues, facilitating systematic protein expression profiling in health and disease. In two recent papers, Swedish researchers describe a concerted effort towards producing a 'Human Protein Atlas' by combining high-throughput antibody generation with immunohistochemical profiling of tissue microarrays.

Immunoassay and antibody microarray analysis of the HUPO Plasma Proteome Project reference specimens: systematic variation between sample types and calibration of mass spectrometry data.

Four different immunoassay and antibody microarray methods performed at four different sites were used to measure the levels of a broad range of proteins (N = 323 assays; 39, 88, 168, and 28 assays at the respective sites; 237 unique analytes) in the human serum and plasma reference specimens distributed by the Plasma Proteome Project (PPP) of the HUPO. The methods provided a means to (1) assess the level of systematic variation in protein abundances associated with blood preparation methods (serum, citrate-anticoagulated-plasma, EDTA-anticoagulated-plasma, or heparin-anticoagulated-plasma) and (2) evaluate the dependence on concentration of MS-based protein identifications from data sets using the HUPO specimens. Some proteins, particularly cytokines, had highly variable concentrations between the different sample preparations, suggesting specific effects of certain anticoagulants on the stability or availability of these proteins. The linkage of antibody-based measurements from 66 different analytes with the combined MS/MS data from 18 different laboratories showed that protein detection and the quality of MS data increased with analyte concentration. The conclusions from these initial analyses are that the optimal blood preparation method is variable between analytes and that the discovery of blood proteins by MS can be extended to concentrations below the ng/mL range under certain circumstances. Continued developments in antibody-based methods will further advance the scientific goals of the PPP.

Engineering dihydropteroate synthase (DHPS) for efficient expression on M13 phage.

Phage display is a commonly used selection technique in protein engineering, but not all proteins can be expressed on phage. Here, we describe the expression of a cytoplasmic homodimeric enzyme dihydropteroate synthetase (DHPS) on M13 phage, established by protein engineering of DHPS. The strategy included replacement of cysteine residues and screening for periplasmic expression followed by random mutagenesis and phage display selection with a conformation-specific anti-DHPS antibody. Cysteine replacement alone resulted in a 12-fold improvement in phage display of DHPS, but after random mutagenesis and three rounds of phage display selection, phage display efficiency of the library had improved 280-fold. Most of the selected clones had a common Asp96Asn mutation that was largely responsible for the efficient phage display of DHPS. Asp96Asn affected synergistically with the cysteine replacing mutations that were needed to remove the denaturing effect of potential wrong disulfide bridging in phage display. Asp96Asn alone resulted in a 1.8-fold improvement in phage display efficiency, but in combination with the cysteine replacing mutations, a total of 130-fold improvement in phage display efficiency of DHPS was achieved.

Selecting for antibody scFv fragments with improved stability using phage display with denaturation under reducing conditions.

Stability of single-chain Fvs (scFvs) can be improved by mutagenesis followed by phage display selection where the unstable variants are first inactivated by, for example, denaturing treatment. Here we describe a modified strategy for the selection of stabilized antibody fragments by phage display, based on denaturation under reducing conditions. This strategy was applied to an anti-thyroid-stimulating hormone (TSH) scFv fragment which refolded remarkably during the selection if denaturation was carried out in conventionally used non-reducing conditions. Refolding was, however, efficiently prevented by combining denaturation with reduction of the intra-domain disulfide bridges, which created favourable conditions for selection of clones with improved stability. Using this strategy, scFv mutants with 8-9 degrees C improved thermal stability and 0.8-0.9 M improved stability for guanidinium chloride were found after 4-5 enrichment cycles. The most stable mutants selected contained either Lys(H)66Arg or Asn(H)52aSer mutations, which are known to stabilize other scFvs. Periplasmic expression level of the mutants was also improved.

Evaluating sandwich immunoassays in microarray format in terms of the ambient analyte regime.

BACKGROUND: Conceptionally, antibody microarrays are simply multiplexed sandwich immunoassays in a miniaturized format. However, from the amounts of capture antibodies used, it is not apparent whether such assays are ambient analyte (Ekins. Clin Chem 1998;44:2015-30) or mass-sensing devices (Silzel et al. Clin Chem 1998;44:2036-43). We evaluated multiplexed microarray sandwich assays for 24 mouse serum proteins in these terms within the boundaries of our experimental setup and based on theoretical considerations of the law of mass action. METHODS: Capture antibodies for 24 mouse serum proteins were printed on planar microarray substrates. After incubation with mixtures of purified antigens for 1 or 18 h, mixtures of biotinylated detection antibodies were used. High assay sensitivity was achieved by use of resonance-light-scattering particles for signal generation. Titration curves were generated for assay volumes of 20, 40, and 80 microL, and detection limits were calculated and compared. The assays were modeled theoretically based on the amounts of capture antibodies and the assay volumes used. RESULTS: As predicted, experimental variations of the assay volume by up to fourfold did not appreciably affect detection. Even for the most sensitive assay, < 2% of the analyte molecules present in the sample were captured and generated signal at the detection limit. However, increasing the sample incubation time from 1 to 18 h on average lowered the detection limit threefold. CONCLUSIONS: In our experimental setup, all 24 sandwich microarray assays fulfill the criteria of the "ambient analyte" regime because depletion of analyte molecules from the assay volume is insignificant.

Affinity-independent elution of antibody-displaying phages using cleavable DNA linker containing streptavidin beads.

The search for high-affinity antibodies from phage libraries by panning is often complicated by inefficient detachment of the captured phage particles from the antigen-coated solid phase. General elution methods, independent on the bioaffinity interaction, would be desirable for high-throughput antibody screening. We have developed a bioaffinity-independent elution method based on the use of commercially available streptavidin paramagnetic particles.

Modulating the binding properties of an anti-17beta-estradiol antibody by systematic mutation combinations.

The anti-17beta-estradiol antibody 57-2 has been a subject for several protein engineering studies that have produced a number of mutants with improved binding properties. Here, we generated a set of 16 antibody 57-2 variants by systematically combining mutations previously identified from phage display-derived improved antibody mutants. These mutations included three point mutations in the variable domain of the light-chain and a heavy-chain variant containing a four-residue random insertion in complementarity determining region CDR-H2. The antibody variants were expressed as Fab fragments, and they were characterized for affinity toward estradiol, for cross-reactivity toward three related steroids, and for dissociation rate of the Fab/estradiol complex by using time-resolved fluorescence based immunoassays. The double-mutant cycle method was used to address the cooperativity effects between the mutations. The experimental data were correlated with structural information by using molecular modeling and visual analysis of the previously solved antibody 57-2 crystal structures. These analyses provided information about the steroid-binding mode of the antibody, the potential mechanisms of individual mutations, and their mutual interactions. Furthermore, several combinatorial mutants with improved affinity and specificity were obtained. The capacity of one of these mutants to detect estradiol concentrations at a clinically relevant range was proved by establishing a time-resolved fluorescence based immunoassay.

Further improvement of broad specificity hapten recognition with protein engineering.

Sulfa-antibiotics (sulfonamides) are widely used in veterinary medicine. Meat and milk from treated animals can be contaminated with sulfa residues. Current sulfonamide assays are unfit for screening of food, because they are either too laborious, insensitive or specific for a few sulfa compounds only. An immunoassay for detection of all sulfas in a single reaction would be useful for screening. Previously we have improved the broad specificity sulfa binding of antibody 27G3 with random mutagenesis and phage display. In order to improve the properties of this antibody further, mutants from the previous study were recombined and more mutations introduced. These new libraries were enriched with phage display and several different mutant antibodies were isolated. The cross-reaction profile of the best mutant was better than that of the wild-type antibody and the mutants of the previous study: it was capable of binding 10 of the tested 13 sulfonamides within a narrow concentration range and also bound the rest of the sulfas 5- to 11-fold better than the mutants of the previous study.