Photoinduced Charge Separation in Porphyrin Ion Pairs.

Ion pairs between porphyrin-type compounds have been successfully employed for spectral sensitization of semiconductor surfaces and for the preparation of collective binary ionic materials for photonic and (photo)catalytic applications. The understanding of the photophysical processes occurring within ion-paired porphyrin dimers is thus of remarkable importance for the optimization and improvement of such systems. Herein the ion-pair species formed between ZnTMePyP(4+) (Zn1) or H2TMePyP(4+) (H21) and ZnTPPS(4-) (Zn2) or H2TPPS(4-) (H22) in a variety of solvent mixtures are characterized and their photophysics thoroughly investigated by time-resolved techniques. In all the systems studied, very fast and efficient photoinduced charge separation is observed, with the cationic porphyrin being reduced and the anionic one oxidized. Interestingly, despite the very short charge separation distance, the lifetime for charge recombination, depending on the energy gap, can extend into the nanosecond time domain, showing great potential for the utilization of this molecular design within energy conversion schemes.

Photoinduced hydrogen evolution by a pentapyridine cobalt complex: elucidating some mechanistic aspects.

A new hydrogen evolving cobalt catalyst 1 based on a pentapyridine ligand has been synthesized and characterized. Its photocatalytic activity in the presence of a Ru(bpy)3(2+) sensitizer and ascorbic acid as a sacrificial electron donor has been screened in purely buffered aqueous solutions showing TONs and TOFs strongly dependent on both catalyst concentration and pH with the best results obtained at 50 µM 1 and at pH 4 (TON = 187, TOF = 8.1 min(-1)). The photochemical mechanism, as revealed by flash photolysis, involves reaction of the excited sensitizer with ascorbic acid to yield Ru(bpy)3(+) as a primary photo-generated reductant, capable of electron transfer to 1 with a remarkable rate (bimolecular rate constant k = 5.7 (±0.7) × 10(9) M(-1) s(-1)). For hydrogen generation, two one-electron photochemical reduction steps of 1 are needed along with hydride formation and protonation. Under the experimental conditions used, hydrogen evolution is mainly limited by partial decomposition of both the sensitizer and the catalyst. Moreover, accumulation of the oxidation product of the ascorbic acid donor, dehydroascorbic acid, is observed to strongly decrease the hydrogen production yield. As shown by flash photolysis, this species is capable of quenching the reduced ruthenium species (k = 4.4 (±0.5) × 10(7) M(-1) s(-1)) thus competing with electron transfer to the catalyst.

Photocatalytic water oxidation by a mixed-valent Mn(III)3Mn(IV)O3 manganese oxo core that mimics the natural oxygen-evolving center.

The functional core of oxygenic photosynthesis is in charge of catalytic water oxidation by a multi-redox Mn(III)/Mn(IV) manifold that evolves through five electronic states (S(i), where i=0-4). The synthetic model system of this catalytic cycle and of its S0→S4 intermediates is the expected turning point for artificial photosynthesis. The tetramanganese-substituted tungstosilicate [Mn(III)3Mn(IV)O3(CH3COO)3(A-α-SiW9O34)](6-)(Mn4POM) offers an unprecedented mimicry of the natural system in its reduced S0 state; it features a hybrid organic-inorganic coordination sphere and is anchored on a polyoxotungstate. Evidence for its photosynthetic properties when combined with [Ru(bpy)3](2+) and S2O8(2-) is obtained by nanosecond laser flash photolysis; its S0→S1 transition within milliseconds and multiple-hole-accumulating properties were studied. Photocatalytic oxygen evolution is achieved in a buffered medium (pH 5) with a quantum efficiency of 1.7%.

The use of a vanadium species as a catalyst in photoinduced water oxidation.

The first water oxidation catalyst containing only vanadium atoms as metal centers is reported. The compound is the mixed-valence [(V(IV)5V(V)1)O7(OCH3)12](-) species, 1. Photoinduced water oxidation catalyzed by 1, in the presence of Ru(bpy)3(2+) (bpy = 2,2'-bipyridine) and Na2S2O8, in acetonitrile/aqueous phosphate buffer takes place with a quantum yield of 0.20. A hole scavenging reaction between the photochemically generated Ru(bpy)3(3+) and 1 occurs with a bimolecular rate constant of 2.5 × 10(8) M(-1) s(-1). The time-resolved formation of the oxidized molecular catalyst 1(+) in bimolecular reactions is also evidenced for the first time by transient absorption spectroscopy. This result opens the way to the use of less expensive vanadium clusters as water oxidation catalysts in artificial photosynthesis schemes.

Photoinduced electron transfer across molecular bridges: electron- and hole-transfer superexchange pathways.

Photoinduced electron transfer plays key roles in many areas of chemistry. Superexchange is an effective model to rationalize photoinduced electron transfer, particularly when molecular bridges between donor and acceptor subunits are present. In this tutorial review we discuss, within a superexchange framework, the complex role played by the bridge, with an emphasis on differences between thermal and photoinduced electron transfer, oxidative and reductive photoinduced processes, charge separation and charge recombination. Modular bridges are also considered, with specific attention to the distance dependence of donor-acceptor electronic coupling and electron transfer rate constants. The possibility of transition, depending on the bridge energetics, from coherent donor-acceptor electron transfer to incoherent charge injection and hopping through the bridge is also discussed. Finally, conceptual analogies between bridge effects in photoinduced electron transfer and optical intervalence transfer are outlined. Selected experimental examples, instrumental to illustration of the principles, are discussed.

A Co(II)-Ru(II) dyad relevant to light-driven water oxidation catalysis.

Artificial photosynthesis aims at efficient water splitting into hydrogen and oxygen, by exploiting solar light. As a priority requirement, this process entails the integration of suitable multi-electron catalysts with light absorbing units, where charge separation is generated in order to drive the catalytic routines. The final goal could be the transposition of such an asset into a photoelectrocatalytic cell, where the two half-reactions, proton reduction to hydrogen and water oxidation to oxygen, take place at two appropriately engineered photoelectrodes. We herein report a covalent approach to anchor a Co(II) water oxidation catalyst to a Ru(II) polypyridine photosensitizer unit; photophysical characterisation and the catalytic activity of such a dyad in a light activated cycle are reported, and implications for the development of regenerative systems are discussed.

Efficient photocatalytic hydrogen generation from water by a cationic cobalt(II) porphyrin.

Efficient photocatalytic hydrogen evolution is obtained from 1 M phosphate buffer at pH 7 in the presence of a Ru(bpy)3(2+) sensitizer, an ascorbic acid sacrificial donor, and a water-soluble Co(II) porphyrin catalyst. Spectroscopic investigation of the system by stationary and time-resolved techniques enables a complete characterization of the photoinduced dynamics.

On the effect of the nature of the bridge on oxidative or reductive photoinduced electron transfer in donor-bridge-acceptor systems.

Photoinduced electron transfer is a topical issue in chemistry. In multicomponent donor-bridge-acceptor systems, electron transfer is usually discussed within the frame of superexchange theory, which takes into account electronic coupling mediated by virtual states involving bridge orbitals. However, the schematization used for superexchange in thermal electron transfer processes is not suitable to immediately understand some intriguing aspects of photoinduced charge separation and recombination processes, which are only uncovered by analyzing the virtual states involved in forward and backward excited-state electron transfer. In particular, for oxidative photoinduced electron transfer, a low-energy virtual state which cannot mediate the forward charge separation can efficiently mediate charge recombination via the hole-transfer superexchange route, whereas for reductive photoinduced electron transfer, a low-energy virtual state which cannot mediate the forward process can efficiently mediate charge recombination via electron-transfer superexchange. As a consequence, to obtain long-lived charge-separated states upon oxidative photoinduced electron transfer in donor-bridge-acceptor systems it is preferable to avoid easy-to-oxidize bridges, whereas easy-to-reduce bridges should better be avoided in reductive photoinduced charge separation. These considerations, exemplified by the analysis of some literature cases, can be useful hints for the design of long-lived charge-separated states.

Light driven water oxidation by a single site cobalt salophen catalyst.

A salophen cobalt(II) complex enables water oxidation at neutral pH in photoactivated sacrificial cycles under visible light, thus confirming the high appeal of earth abundant single site catalysis for artificial photosynthesis.

Porphyrin-cobaloxime dyads for photoinduced hydrogen production: investigation of the primary photochemical process.

Three porphyrin-cobaloxime dyads, suitable for application in photoinduced hydrogen generation with sacrificial donors, are characterized by ultrafast spectroscopy in order to clarify the primary photochemical events.

Photocatalytic hydrogen evolution with a self-assembling reductant-sensitizer-catalyst system.

A noble-metal-free system for photochemical hydrogen production is described, based on ascorbic acid as sacrificial donor, aluminium pyridyl porphyrin as photosensitizer, and cobaloxime as catalyst. Although the aluminium porphyrin platform has docking sites for both the sacrificial donor and the catalyst, the resulting associated species are essentially inactive because of fast unimolecular reversible electron-transfer quenching. Rather, the photochemically active species is the fraction of sensitizer present, in the aqueous/organic solvent used for hydrogen evolution, as free species. As shown by nanosecond laser flash photolysis experiments, its long-lived triplet state reacts bimolecularly with the ascorbate donor, and the reduced sensitizer thus formed, subsequently reacts with the cobaloxime catalyst, thereby triggering the hydrogen evolution process. The performance is good, particularly in terms of turnover frequencies (TOF=10.8 or 3.6 min(-1), relative to the sensitizer or the catalyst, respectively) and the quantum yield (Φ=4.6%, that is, 9.2% of maximum possible value). At high sacrificial donor concentration, the maximum turnover number (TON=352 or 117, relative to the sensitizer or the catalyst, respectively) is eventually limited by hydrogenation of both sensitizer (chlorin formation) and catalyst.

Tetrametallic molecular catalysts for photochemical water oxidation.

Among molecular water oxidation catalysts (WOCs), those featuring a reactive set of four multi-redox transition metals can leverage an extraordinary interplay of electronic and structural properties. These are of particular interest, owing to their close structural, and possibly functional, relationship to the oxygen evolving complex of natural photosynthesis. In this review, special attention is given to two classes of tetrametallic molecular WOCs: (i) M(4)O(4) cubane-type structures stabilized by simple organic ligands, and (ii) systems in which a tetranuclear metal core is stabilized by coordination of two polyoxometalate (POM) ligands. Recent work in this rapidly evolving field is reviewed, with particular emphasis on photocatalytic aspects. Special attention is given to studies addressing the mechanistic complexity of these systems, sometimes overlooked in the rush for oxygen evolving performance. The complementary role of molecular WOCs and their relationship with bulk oxides and heterogeneous catalysis are discussed.

Nondestructive photoluminescence read-out by intramolecular electron transfer in a perylene bisimide-diarylethene dyad.

A novel, highly stable photochromic dyad 3 based on a perylene bisimide (PBI) fluorophore and a diarylethene (DAE) photochrome was synthesized and the optical and photophysical properties of this dyad were studied in detail by steady-state and time-resolved ultrafast spectroscopy. This photochromic dyad can be switched reversibly by UV-light irradiation of its ring-open form 3 o leading to the ring-closed form 3 c, and back reaction of 3 c to 3 o by irradiation with visible light. Solvent-dependent fluorescence studies revealed that the emission of ring-closed form 3 c is drastically quenched in solvents of medium (e.g., chloroform) to high (e.g., acetone) polarities, while the emission of the ring-open form 3 o is appreciably quenched only in highly polar solvents like DMF. The strong fluorescence quenching of 3 c is attributed to a photoinduced electron-transfer (PET) process from the excited PBI unit to ring-closed DAE moiety, as this process is thermodynamically highly favorable with a Gibbs free energy value of -0.34 eV in dichloromethane. The electron-transfer mechanism for the fluorescence quenching of ring-closed 3 c is substantiated by ultrafast transient measurements in dichloromethane and acetone, revealing stabilization of charge-separated states of 3 c in these solvents. Our results reported here show that the new photochromic dyad 3 has potential for nondestructive read-out in write/read/erase fluorescent memory systems.

Is [Co4(H2O)2(α-PW9O34)2](10-) a genuine molecular catalyst in photochemical water oxidation? Answers from time-resolved hole scavenging experiments.

Water oxidation catalysts: evolution of [Co(4)(H(2)O)(2)(α-PW(9)O(34))(2)](10-) to catalytically active species is assessed by laser flash photolysis in sacrificial photocatalytic cycles with Ru(bpy)(3)(2+) as a photosensitizer.

Photoinduced water oxidation by a tetraruthenium polyoxometalate catalyst: ion-pairing and primary processes with Ru(bpy)3(2+) photosensitizer.

The tetraruthenium polyoxometalate [Ru(4)(µ-O)(4)(µ-OH)(2)(H(2)O)(4)(γ-SiW(10)O(36))(2)](10-) (1) behaves as a very efficient water oxidation catalyst in photocatalytic cycles using Ru(bpy)(3)(2+) as sensitizer and persulfate as sacrificial oxidant. Two interrelated issues relevant to this behavior have been examined in detail: (i) the effects of ion pairing between the polyanionic catalyst and the cationic Ru(bpy)(3)(2+) sensitizer, and (ii) the kinetics of hole transfer from the oxidized sensitizer to the catalyst. Complementary charge interactions in aqueous solution leads to an efficient static quenching of the Ru(bpy)(3)(2+) excited state. The quenching takes place in ion-paired species with an average 1:Ru(bpy)(3)(2+) stoichiometry of 1:4. It occurs by very fast (ca. 2 ps) electron transfer from the excited photosensitizer to the catalyst followed by fast (15-150 ps) charge recombination (reversible oxidative quenching mechanism). This process competes appreciably with the primary photoreaction of the excited sensitizer with the sacrificial oxidant, even in high ionic strength media. The Ru(bpy)(3)(3+) generated by photoreaction of the excited sensitizer with the sacrificial oxidant undergoes primary bimolecular hole scavenging by 1 at a remarkably high rate (3.6 ± 0.1 × 10(9) M(-1) s(-1)), emphasizing the kinetic advantages of this molecular species over, e.g., colloidal oxide particles as water oxidation catalysts. The kinetics of the subsequent steps and final oxygen evolution process involved in the full photocatalytic cycle are not known in detail. An indirect indication that all these processes are relatively fast, however, is provided by the flash photolysis experiments, where a single molecule of 1 is shown to undergo, in 40 ms, ca. 45 turnovers in Ru(bpy)(3)(3+) reduction. With the assumption that one molecule of oxygen released after four hole-scavenging events, this translates into a very high average turnover frequency (280 s(-1)) for oxygen production.

Photocatalytic water oxidation: tuning light-induced electron transfer by molecular Co4O4 cores.

Isostructural cubane-shaped catalysts [Co(III)(4)(µ-O)(4)(µ-CH(3)COO)(4)(p-NC(5)H(4)X)(4)], 1-X (X = H, Me, t-Bu, OMe, Br, COOMe, CN), enable water oxidation under dark and illuminated conditions, where the primary step of photoinduced electron transfer obeys to Hammett linear free energy relationship behavior. Ligand design and catalyst optimization are instrumental for sustained O(2) productivity with quantum efficiency up to 80% at λ > 400 nm, thus opening a new perspective for in vitro molecular photosynthesis.

Light-driven water oxidation with a molecular tetra-cobalt(III) cubane cluster.

Photoinduced water oxidation to molecular oxygen takes place in systems made of [Ru(bpy)3]2+ (bpy = 2,2'-bipyridine) as the photosensitizer, [Co4O4(O2CMe)4(py)4] (py = pyridine) as the molecular catalyst and Na2S2O8 as the sacrificial electron acceptor. The photochemical quantum yield of the process reaches the outstanding value of 30% and depends on pH and catalyst concentration. Transient absorption spectroscopy experiments aimed to clarify the first events of the photocatalytic process are also reported.

Electron transfer across modular oligo-p-phenylene bridges in Ru(bpy)2(bpy-ph(n)-DQ)4+ (n = 1-5) dyads. Unusual effects of bridge elongation.

A series of dyads of general formula Ru(bpy)(2)(bpy-ph(n)-DQ)(4+) (n = 1-5), based on a Ru(II) polypyridine unit as photoexcitable donor, a set of oligo-p-phenylene bridges with 1-5 modular units, and a cyclo-diquaternarized 2,2'-bipyridine (DQ(2+)) as electron acceptor unit, have been synthesized. Their spectroscopic and photophysical properties have been investigated in CH(3)CN and CH(2)Cl(2) by time-resolved emission and absorption spectroscopy in the nanosecond and picosecond time scale. The experimental study has also been complemented with a computational investigation carried out on the whole series of dyads. The absorption spectra of the dyads show new spectroscopic transitions, in addition to those characteristic of the donor, bridge, and acceptor fragments. DFT calculations suggest the assignment of such bands as bridge-to-acceptor (π ph(n)) → (π* DQ) charge-transfer transitions. This assignment is consistent with the solvatochromic and spectroelectrochemical behavior of the new bands. For all the dyads at room temperature in fluid solution, the typical (3)MLCT luminescence of the Ru(II) polypyridine unit is strongly (>90%) quenched, supporting the occurrence of an efficient intramolecular photoinduced electron transfer. The study has revealed, however, that the photophysical mechanism is actually more complex than presumed on the basis of a simple photoinduced electron-transfer scheme. For n = 1, very fast (few picoseconds) photoinduced electron transfer from the MLCT state localized on the substituted bpy ligand to the DQ unit has been observed, followed by slower interligand hopping and charge recombination. For n = 2-5, MLCT excited-state quenching takes place without transient detection of charge-separated product, indicating that charge recombination is faster than charge separation. This behavior can be rationalized in terms of the superexchange couplings expected through this type of bridges for the two processes. The kinetics of MLCT quenching in the dyads with n = 1-5 does not follow the usual exponential falloff with bridge length: after a regular decrease for n = 1-3, the rate constants become almost insensitive to bridge length for n = 3-5. The rationale of this uncommon behavior, as suggested by DFT calculations, lies in a switch in the MLCT quenching mechanism with increasing bridge length, from oxidative quenching by the DQ acceptor to reductive quenching by the bridge.