Autologous Adipose-Derived Tissue Matrix Part I: Biologic Characteristics.

BACKGROUND: Autologous collagen is an ideal soft tissue filler and may serve as a matrix for stem cell implantation and growth. Procurement of autologous collagen has been limited, though, secondary to a sufficient source. Liposuction is a widely performed and could be a source of autologous collagen. OBJECTIVES: The amount of collagen and its composition in liposuctioned fat remains unknown. The purpose of this research was to characterize an adipose-derived tissue-based product created using ultrasonic cavitation and cryo-grinding. This study evaluated the cellular and protein composition of the final product. METHODS: Fat was obtained from individuals undergoing routine liposuction and was processed by a 2 step process to obtain only the connective tissue. The tissue was then evaluated by scanning electronic microscope, Western blot analysis, and flow cytometry. RESULTS: Liposuctioned fat was obtained from 10 individuals with an average of 298 mL per subject. After processing an average of 1 mL of collagen matrix was obtained from each 100 mL of fat. Significant viable cell markers were present in descending order for adipocytes > CD90+ > CD105+ > CD45+ > CD19+ > CD144+ > CD34+. Western blot analysis showed collagen type II, III, IV, and other proteins. Scanning electronic microscope study showed a regular pattern of cross-linked, helical collagen. Additionally, vital staing demonstrated that the cells were still viable after processing. CONCLUSIONS: Collagen and cells can be easily obtained from liposuctioned fat by ultrasonic separation without alteration of the overall cellular composition of the tissue. Implantation results in new collagen and cellular growth. Collagen matrix with viable cells for autologous use can be obtained from liposuctioned fat and may provide long term results. LEVEL OF EVIDENCE: 5.

Autologous Adipose-Derived Tissue Matrix Part II: Implantation Biology.

BACKGROUND: In part 1 of this study it was shown that liposuctioned fat could be a sufficient source of autologous collagen for use as a filler or in reconstruction. The collagen composition in liposuctioned fat was shown to form a cross-linked helical matrix composed of types II, III, and IV. Additionally, viable adipocytes and fibroblasts among other cells were found. OBJECTIVES: The purpose of this research was to study the biology of this matrix after subsequent implantation compared to Juvederm (Allergan, Parsippany, NJ) common soft tissue filler. METHODS: Fat was obtained from individuals undergoing routine liposuction and was processed by a two-step process to obtain a connective tissue matrix. The matrix was then cryo-frozen for a minimum of 4 weeks after which it was thawed and implanted in 46 nude mice. Juvederm Ultra was used as the control article and the animals followed for one year. RESULTS: Liposuctioned fat was obtained from 10 individuals and processed as previously described. Mice were harvested at 3, 6, 9, and 12 months and histology obtained. There were no adverse effects from either article and the bio-reactivity rating was 0. The implanted collagen compared favorably to Juvederm at all stages and was found to be replaced by new collagen and fat. CONCLUSIONS: A collagen matrix with viable cells for autologous use can be obtained from liposuctioned fat which has been processed and cryo-frozen. The material lasts at least one year and is slowly replaced by new collagenand fat. LEVEL OF EVIDENCE: 5.

Enriched autologous facial fat grafts in aesthetic surgery: 3D volumetric results.

BACKGROUND: Improved results with aesthetic fat augmentation of the face have been recently described by the concomitant use of autologous stem cells from the stromal vascular fraction (SVF). OBJECTIVE: There are no studies in the literature regarding facial fat augmentation results with the use of SVF using 3D computer volumetric analyses. This prospective study was thus undertaken to answer this question. METHODS: Fat was harvested by a standard liposuction technique for reinjection. A 50 cc aliquot of fat was also processed to obtain the SVF using a standard collagenase technique. A cell count was done using a cytometer, and the amount of injected fat and cells were recorded. The Vultus 3D photogrammetric scanning system was used to scan the face pre- and posttreatment and long-term, and volume changes were then calculated at the different time intervals. The data was then correlated to the variables. RESULTS: Ten subjects were included in the study, with an average follow-up of 12.6 months. The average amount of fat injected was 18.4 cc, of which 68% was retained. The average cell count of the SVF was 4.8 × 105. The amount of retained fat by volume was found to be positively correlated to the number of cells in the SVF. There was no correlation between the age and number of cells in the SVF. CONCLUSIONS: There is a correlation between the number of cells in the SVF and the amount of fat retained. LEVEL OF EVIDENCE: 3 Therapeutic.

Three-dimensional upper-airway changes with maxillomandibular advancement for obstructive sleep apnea treatment.

INTRODUCTION: Airway size increases are associated with maxillomandibular advancement (MMA) surgery and improvement or elimination of obstructive sleep apnea (OSA). The 3-dimensional morphologic, volumetric, height, cross-sectional surface area, and diameter changes of the upper airway in patients with OSA after MMA, however, are not well understood. METHODS: Patients with moderate or severe OSA who underwent MMA surgery were evaluated by preoperative and postoperative cone-beam computed tomography scans and polysomnograms. The upper airway space was also divided into retropalatal and retroglossal spaces and was analyzed for volumetric, height, cross-sectional surface area, transverse, and anteroposterior diameter changes. RESULTS: Ten consecutive OSA patients with an average preoperative apnea/hypopnea index of 46 and treated with MMA surgery were included in this study. There were 8 men and 2 women, with an average age of 46 years and an average body mass index of 28. There was an average of a 2.5-fold increase in the total volume of the upper airway space. The retropalatal space increased by 3.5-fold. The retroglossal space increased by 1.5-fold. The greatest change in a cross-sectional area occurred in the transverse axis in both the retroglossal and retropalatal spaces. The average apnea/hypopnea index was 4 postoperatively. CONCLUSION: MMA surgery results in a significant increase in the volume and a morphologic airway change from a round to an elliptical f shape in the upper airway space in patients with OSA. The combination of these actions reduces the collapsibility of the upper airway space, hence improving or resolving the OSA.

Combined orthognathic distraction procedure: Le Fort I maxillary osteotomy and mandibular curvilinear distraction osteogenesis. A new technique for craniofacial management.

Dentofacial deformities are traditionally treated by maxillary and mandibular osteotomies conducted separately or simultaneously. Recently, distraction osteogenesis has become an irreplaceable part of the surgical armamentarium, for its ability to induce new bone formation between the surfaces of bone segments that are gradually separated by incremental traction, along with a simultaneous expansion of the surrounding soft-tissue envelope. The aim of this article is to describe a combined surgical technique consisting of simultaneous maxillary Le Fort I advancement and mandibular surgical repositioning by means of bilateral sagittal split osteotomy with a curvilinear distractor based on a preliminary computerized presurgical prediction.

HEAR MAPS a classification for congenital microtia/atresia based on the evaluation of 742 patients.

OBJECTIVE: Describe anatomical and radiological findings in 742 patients evaluated for congenital aural atresia and microtia by a multidisciplinary team. Develop a new classification method to enhance multidisciplinary communication regarding patients with congenital aural atresia and microtia. METHODS: Retrospective chart review with descriptive analysis of findings arising from the evaluation of patients with congenital atresia and microtia between January 2008 and January 2012 at a multidisciplinary tertiary referral center. RESULTS: We developed a classification method based on the acronym HEAR MAPS (Hearing, Ear [microtia], Atresia grade, Remnant earlobe, Mandible development, Asymmetry of soft tissue, Paralysis of the facial nerve and Syndromes). We used this method to evaluate 742 consecutive congenital atresia and microtia patients between 2008 and January of 2012. Grade 3 microtia was the most common external ear malformation (76%). Pre-operative Jahrsdoerfer scale was 9 (19%), 8 (39%), 7 (19%), and 6 or less (22%). Twenty three percent of patients had varying degrees of hypoplasia of the mandible. Less than 10% of patients had an identified associated syndrome. CONCLUSION: Patients with congenital aural atresia and microtia often require the intervention of audiology, otology, plastic surgery, craniofacial surgery and speech and language professionals to achieve optimal functional and esthetic reconstruction. Good communication between these disciplines is essential for coordination of care. We describe our use of a new classification method that efficiently describes the physical and radiologic findings in microtia/atresia patients to improve communication amongst care providers.

3-dimensional facial simulation in orthognathic surgery: is it accurate?

PURPOSE: The purpose of this study was to measure the accuracy of 3D computer simulation of soft tissue changes after orthognathic surgery. MATERIALS AND METHODS: Consecutive patients who underwent orthognathic surgery were studied by photogrammetric facial scanning and cone-beam computed tomography before and after surgery. The photogrammetric scan was then fused to the cone-beam computed tomogram, creating a patient-specific image. The surgery was simulated in 3D form and the simulated soft tissue face was compared with the actual facial scan obtained 6 months postoperatively. Absolute millimeter differences between the simulated and actual postoperative changes in selected cephalometric skin markings were computed. RESULTS: The study was composed of 23 subjects (mean age, 31 yr; 13 women and 10 men). Eighteen different cephalometric landmarks were measured (total, 28). For 15 landmarks, the difference between actual and simulated measurements was smaller than 0.5 mm. Only 3 landmarks had a difference of 0.5 mm, and these were in the region of the labial landmarks. CONCLUSION: Based on the present study, 3-dimensional computer surgical simulation of the soft tissue of the face for routine orthognathic surgery is accurate enough for routine clinical use.

Using bioabsorbable fixation systems in the treatment of pediatric skull deformities leads to good outcomes and low morbidity.

BACKGROUND: Bioabsorbable fixation systems have been widely employed in pediatric patients for cranial reconstruction, obviating the complications of hardware migration and imaging artifact occurring with metallic implants. Recent concern over complications unique to bioabsorbable materials, such as inflammatory reaction and incomplete resorption, necessitates additional conclusive studies to further validate their use in pediatric neurosurgery and craniofacial surgery. Likewise, long-term follow-up in this clinical cohort has not previously been described. METHODS: We included consecutive pediatric patients under the age of 2, from Lucile Packard Children's Hospital, who underwent cranial vault reconstruction with the use of a bioabsorbable fixation system between 2003 and 2010. Hospital records were queried for patient characteristics, intraoperative data, and postoperative complications. RESULTS: Ninety-five patients with the following preoperative pathologies were analyzed: craniosynostosis (87), cloverleaf skull (5), frontonasal dysplasia (1), and frontonasal encephalocele (2). Median age was 6 months (range 1-24 months). Average case duration was 204 minutes (range 40-392 min), with median of 154 mL blood loss (range 30-500 mL). Ninety-three percent of patients had 1-4 plates implanted with 48% receiving three plates. The median number of screws used was 59 (range 0-130). The median length of hospital stay was 4 days (range 2-127 days) with an average follow-up of 22 months (five postoperative visits). The complications related to hardware implantation included swelling (1%) and broken hardware (1%), the latter of which required reoperation. DISCUSSION: The bioabsorbable fixation systems for cranial vault reconstruction in children less than 2 years of age is safe with tolerable morbidity rates.

Airway growth and development: a computerized 3-dimensional analysis.

PURPOSE: The present study was undertaken to investigate the changes in the normal upper airway during growth and development using 3-dimensional computer analysis from cone-beam computed tomography (CBCT) data to provide a normative reference. METHODS: The airway size and respiratory mode are known to have a relationship to facial morphology and the development of a malocclusion. The use of CBCT, 3-dimensional imaging, and automated computer analysis in treatment planning allows the upper airway to be precisely evaluated. In the present study, we evaluated the growth of the airway using 3-dimensional analysis and CBCT data from age 6 through old age, in 1300 normal individuals. RESULTS: The airway size and length increase until age 20 at which time a variable period of stability occurs. Next, the airway at first decreases slowly in size and then, after age 40, more rapidly. Normative data are provided in the present study for age groups from 6 to 60 years in relation to the airway total volume, smallest cross-sectional area and vertical length of the airway. CONCLUSIONS: This 3-dimensional data of the upper airway will provide a normative reference as an aid in the early understanding of respiration and dentofacial anatomy, which will help in early treatment planning.

The future in craniofacial surgery: computer-assisted planning.

Advancements in computers, prototyping, and imaging, especially over the last 10 years, have permitted the adoption of three-dimensional imaging protocols in the health care field. In this article, the authors present an integrated simulation system for craniofacial surgical planning and treatment. Image fusion technology, which involves combining different imaging modalities, was utilized to create a realistic prototype and virtual image that can be manipulated in real time. The resultant data can then be shared over the Internet with distantly located practitioners.

Treatment of maxillomandibular deformities with internal curvilinear distraction.

Internal curvilinear distraction is successful in achieving clinically significant distraction with stable occlusion in our patient population of infants, adolescents, and adults. When distracting the mandible, the curve of the distractor, the position of the distractor, and the osteotomy site are accountable for the final result. The curved distractor can mimic part of the natural logarithmic growth of the maxillomandibular complex. In addition, the result is predictable based on this design and the internal nature of the distractor, which can be left in place longer than other distractor types. Distraction can be combined with orthognathic surgery in certain cases resulting in increased benefit. This new procedure is called distraction orthognathics.

Image fusion in preoperative planning.

This article presents a comprehensive overview of generating a digital Patient-Specific Anatomic Reconstruction (PSAR) model of the craniofacial complex as the foundation for a more objective surgical planning platform. The technique explores fusing the patient's 3D radiograph with the corresponding high-precision 3D surface image within a biomechanical context. As taking 3D radiographs has been common practice for many years, this article describes various approaches to 3D surface imaging and the importance of achieving high-precision anatomical results to simulate surgical outcomes that can be measured and quantified. With the PSAR model readily available for facial assessment and virtual surgery, the advantages of this surgical planning technique are discussed.

Fronto-orbital advancement using an en bloc frontal bone craniectomy.

BACKGROUND: Fronto-orbital advancement is a procedure commonly performed in craniofacial centers for coronal and metopic suture synostosis. Several variations of the technique have been reported. OBJECTIVE: To describe our modifications to the anterior cranioplasty procedure and the results of our surgical series. METHODS: Using our craniofacial database, we retrospectively analyzed the records of all patients undergoing fronto-orbital advancement for craniosynostosis. The same team of neurosurgeons and plastic surgeons performed all procedures. Demographic data, operative time, blood loss, length of stay, and clinical outcome were analyzed. RESULTS: Of 248 patients treated for craniosynostosis, a total of 70 patients underwent fronto-orbital advancement. Nineteen presented with metopic, 26 with unilateral coronal, 17 with bilateral coronal, and 8 with multiple synostosis. Median age at surgery was 6.5 months. Mean operative time was 210 minutes; mean blood loss was 167 mL; and length of stay was 4.5 days. A positive correlation was found between operative time and blood loss (r = 0.1, P < .01) and age at surgery and blood loss (r = 0.3, P < .0001). There was a minor morbidity rate of 2.9%. A good reconstruction was obtained in all patients using our en bloc fronto-orbital advancement without any midline osteotomies at a mean follow-up of 15 months. CONCLUSION: A team approach and the application of a standardized surgical technique should make it safer to operate in young children, shorten the surgical time, and lead to a reduction in blood loss. Reconstructing the frontal bone as an entire unit yielded excellent correction for coronal and metopic synostosis.

Midfacial trauma and facial growth: a longitudinal case study of monozygotic twins.

The purpose of this article is to present a long-term follow-up of the growth of the face and the nasomaxillary complex in a pair of identical twins, one of whom had suffered severe midfacial trauma at age 2 years. Growth of the face and the nasomaxillary complex was longitudinally assessed and compared by means of facial photographs and cephalometric x-rays. Twin A suffered Le Fort II and III fractures with an associated frontal bone injury in early childhood and subsequently developed significant midface hypoplasia; twin B had no trauma and normal facial growth and development. Facial profile difference between the twins gradually became more pronounced until age 19. Twin A had obvious retrusion of the midfacial region, including the nasal bones on visual examination and radiographic study. At age 20, she underwent orthognathic surgical correction of the traumatic deformity. Her unaffected sibling, twin B, provided the genetic facial phenotype for the surgical orthognathic reconstruction.