Mechanical Fractionation of Adipose Tissue-A Scoping Review of Procedures to Obtain Stromal Vascular Fraction.

Clinical indications for adipose tissue therapy are expanding towards a regenerative-based approach. Adipose-derived stromal vascular fraction consists of extracellular matrix and all nonadipocyte cells such as connective tissue cells including fibroblasts, adipose-derived stromal cells (ASCs) and vascular cells. Tissue stromal vascular fraction (tSVF) is obtained by mechanical fractionation, forcing adipose tissue through a device with one or more small hole(s) or cutting blades between syringes. The aim of this scoping review was to assess the efficacy of mechanical fractionation procedures to obtain tSVF. In addition, we provide an overview of the clinical, that is, therapeutic, efficacy of tSVF isolated by mechanical fraction on skin rejuvenation, wound healing and osteoarthritis. Procedures to obtain tissue stromal vascular fraction using mechanical fractionation and their associated validation data were included for comparison. For clinical outcome comparison, both animal and human studies that reported results after tSVF injection were included. We categorized mechanical fractionation procedures into filtration (n = 4), centrifugation (n = 8), both filtration and centrifugation (n = 3) and other methods (n = 3). In total, 1465 patients and 410 animals were described in the included clinical studies. tSVF seems to have a more positive clinical outcome in diseases with a high proinflammatory character such as osteoarthritis or (disturbed) wound healing, in comparison with skin rejuvenation of aging skin. Isolation of tSVF is obtained by disruption of adipocytes and therefore volume is reduced. Procedures consisting of centrifugation prior to mechanical fractionation seem to be most effective in volume reduction and thus isolation of tSVF. tSVF injection seems to be especially beneficial in clinical applications such as osteoarthritis or wound healing. Clinical application of tSVF appeared to be independent of the preparation procedure, which indicates that current methods are highly versatile.

Morphological Variation of the Mandible in the Orthognathic Population-A Morphological Study Using Statistical Shape Modelling.

The aim of this study was to investigate the value of 3D Statistical Shape Modelling for orthognathic surgery planning. The goal was to objectify shape variations in the orthognathic population and differences between male and female patients by means of a statistical shape modelling method. Pre-operative CBCT scans of patients for whom 3D Virtual Surgical Plans (3D VSP) were developed at the University Medical Center Groningen between 2019 and 2020 were included. Automatic segmentation algorithms were used to create 3D models of the mandibles, and the statistical shape model was built through principal component analysis. Unpaired t-tests were performed to compare the principal components of the male and female models. A total of 194 patients (130 females and 64 males) were included. The mandibular shape could be visually described by the first five principal components: (1) The height of the mandibular ramus and condyles, (2) the variation in the gonial angle of the mandible, (3) the width of the ramus and the anterior/posterior projection of the chin, (4) the lateral projection of the mandible's angle, and (5) the lateral slope of the ramus and the inter-condylar distance. The statistical test showed significant differences between male and female mandibular shapes in 10 principal components. This study demonstrates the feasibility of using statistical shape modelling to inform physicians about mandible shape variations and relevant differences between male and female mandibles. The information obtained from this study could be used to quantify masculine and feminine mandibular shape aspects and to improve surgical planning for mandibular shape manipulations.

A Systematic Review of the Efficacy of Microfocused Ultrasound for Facial Skin Tightening.

Objective: to systematically review the efficacy of microfocused ultrasound (MFU) for facial skin tightening. Methods: A systematic search was performed (Pubmed, Embase) to assess the efficacy of single MFU treatments for facial skin tightening. Eligible studies included randomised controlled trials, controlled trials, cohort studies and case series (n ≥ 10). Objective and subjective outcomes were assessed. Results: A total of 693 studies were identified of which 16 studies were eligible. All the studies involved female patients. MFU is capable of tightening the skin, as observed in studies measuring the results of brow lifts (0.47−1.7 mm) and submental lifts (measured as a 26−45 mm2 reduction in the submental area on lateral photographs). Data from the Global Aesthetic Improvement Scale (GAIS) were pooled, and the day 90 pooled subjective investigator reported scores (IGAIS) (n = 337) showed that 92% of the patients demonstrated an improvement in skin tightening and/or in wrinkle reduction which continued up to one year. Longer-term follow-up data are not available. The patient-reported pooled scores (SGAIS) (n = 81) showed that the skin improvements were mild and continued to increase from 42% (90 days) to 53% (360 days) post-treatment. The MFU treatment was moderately painful and caused transient erythema with or without oedema. Other adverse effects were rare (2%), including dysesthesia (numbness or hypersensitivity), bruising and stinging, mandibular burns, striations and contact dermatitis. Various device settings, treatment protocols and energies were applied. Excessive skin laxity and a BMI > 30 were posed as relative contraindications for MFU treatment because positive results declined with an increase in laxity and BMI. Conclusions: MFU treatment is effective in tightening female patients' mildly to moderately lax facial skin. Future studies should focus on objective treatment outcomes, optimising treatment regimens and male patients.

Effects of Upper Blepharoplasty Techniques on Headaches, Eyebrow Position, and Electromyographic Outcomes: A Randomized Controlled Trial.

The aim of this study was to assess changes in headaches, eyebrow height, and electromyographic (EMG) outcomes of the frontalis and orbicularis oculi muscles, after an upper blepharoplasty with or without resecting a strip of orbicularis oculi muscle. In a randomized controlled trial, 54 patients received an upper blepharoplasty involving either only removing skin (group A) or removing skin with an additional strip of orbicularis muscle (group B). Preoperative, and 6 and 12 months postoperative headache complaints were assessed using the HIT-6 scores and eyebrow heights were measured on standardised photographs. Surface EMG measurements, i.e., electrical activity and muscle fatigue, were assessed for the frontalis and orbicularis oculi muscles preoperatively and 2, 6, and 12 months postoperatively. Significantly fewer headaches were reported following a blepharoplasty. The eyebrow height had decreased, but did not differ between groups. Regarding the surface EMG measurements, only group A's frontalis muscle electrical activity had decreased significantly during maximal contraction 12 months after surgery (80 vs. 39 mV, p = 0.026). Fatigue of both the frontalis and the orbicularis oculi muscles did not change significantly postoperatively compared to baseline. EMG differences between groups were minor and clinically insignificant. The eyebrow height decreased and patients reported less headaches after upper blepharoplasty irrespective of the used technique.

Adjunctive Aesthetic Procedures in Orthognathic Surgery.

An important aesthetic goal in orthognathic planning is to improve facial balance, harmony, volume, and symmetry. It is therefore logical that adjunctive aesthetic procedures become a part of the overall orthognathic treatment plan and that their possibilities are discussed with orthognathic candidates. Such procedures help to improve the final outcome of the orthognathic treatment and enhance patient satisfaction. Training and experience are of utmost importance when offering and performing aesthetic facial surgery. This article discusses various facial aesthetic procedures that can be combined with orthognathic surgery, to the patient's benefit, to help them become the most beautiful version of themselves.

Traditional versus Laterally Extended Upper Blepharoplasty Skin Excisions: Objective and Patient-Reported Outcomes.

BACKGROUND: Different skin excision shapes may result in different aesthetic outcomes after upper blepharoplasty. METHODS: Two skin-only excision shapes were evaluated objectively and subjectively in 28 matched patients with laterally extended skin excision (group A) or traditional elliptical skin excision (group B). The pretarsal show, lateral eyebrow height, amount of scarring (evaluated with the Patient and Observer Scar Assessment Scale), and patient-reported aesthetic results (evaluated using FACE-Q) were scored and compared at 6 and 12 months postoperatively. RESULTS: In both groups, pretarsal show improved significantly after blepharoplasty. The homogeneity of pretarsal show improved significantly in the lateral extension group (group A) together with slightly more pretarsal show (0.5 to 0.8 mm at central pupil region) at 6 and 12 months of follow-up compared with group B ( P = 0.004). A trend was observed in the exocanthion 45-degree measurement, in which group A had 0.6 mm greater pretarsal show 6 months postoperatively. Homogeneity of the pretarsal show had improved significantly in group A, but not in group B, at 12 months after blepharoplasty. No other significant differences were observed between the groups regarding pretarsal show measurements or FACE-Q scores. Both groups showed descent of the lateral eyebrow, but this was only significant in group B. Group B showed 1.4 to 2.0 mm more descent compared with group A. Scarring and adverse effects scores were low in both groups and did not differ. CONCLUSION: Laterally extended skin excision and traditional elliptical skin excision both result in positive aesthetic results, but the laterally extended skin excision technique is accompanied by a slightly more favorable outcome. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Volumetric Effect and Patient Satisfaction after Facial Fat Grafting.

BACKGROUND: Facial fat grafts decrease in volume after transplantation. This observation is based on overall facial three-dimensional analyses, because there is sparse information on volume changes in well-defined aesthetic areas. The authors aimed to assess the overall and, more specifically, the local volumetric effects of facial fat grafting and relate these effects to patient satisfaction up to 1 year after treatment. METHODS: All consecutive adult female patients who were scheduled for facial fat grafting without additional surgical procedures were asked to participate. All patients underwent the same fat grafting method. An algorithm-based personalized aesthetic template was applied to define specific aesthetic areas on the preoperative three-dimensional image. Objective outcome parameters [i.e., three-dimensional volume differences, patient satisfaction (FACE-Q questionnaire)] were measured at baseline and at 6 weeks, 6 months, and 12 months after fat grafting. RESULTS: Of 33 female patients who underwent a facial fat graft procedure, 23 patients had complete three-dimensional data and were eligible for analysis. The highest volume gain was observed 6 weeks after grafting and was followed by a gradual loss thereafter. Overall and in the zygomatic area, a substantial gain in volume was still present 1 year after grafting, whereas this effect was lost in the lip area. FACE-Q scales Satisfaction with Facial Appearance Overall and Satisfaction with Cheeks improved too, whereas scores for Lines: Lips returned to baseline levels. The improvement in FACE-Q scales was in agreement with the objective change in volume. CONCLUSION: Gain in overall and local volumetric effects is accompanied by comparable changes in patient satisfaction. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Supplementation of Facial Fat Grafting to Increase Volume Retention: A Systematic Review.

BACKGROUND: For decades, facial fat grafting has been used in clinical practice for volume restoration. The main challenge of this technique is variable volume retention. The addition of supplements to augment fat grafts and increase volume retention has been reported in recent years. OBJECTIVES: The aim of this systematic review was to investigate which supplements increase volume retention in facial fat grafting as assessed by volumetric outcomes and patient satisfaction. METHODS: Embase, Medline, Ovid, Web of Science Core Collection, Cochrane Central Register of Controlled Trials, and Google Scholar were searched up to November 30, 2020. Only studies assessing volume after facial fat grafting with supplementation in human subjects were included. Outcomes of interest were volume or patient satisfaction. The quality of the studies was assessed with the Effective Public Health Practice Project tool. RESULTS: After duplicates were removed 3724 studies were screened by title and abstract. After reading 95 full-text articles, 27 studies were eligible and included for comparison. Supplementation comprised of platelet-rich plasma, platelet-rich fibrin, adipose tissue-derived stromal cells or bone marrow-derived stromal cells, cellular or tissue stromal vascular fraction, or nanofat. In 13 out of 22 studies the supplemented group showed improved volumetric retention and 5 out of 16 studies showed greater satisfaction. The scientific quality of the studies was rated as weak for 20 of 27 studies, moderate for 6 of 27 studies, and strong for 1 study. CONCLUSIONS: It remains unclear if additives contribute to facial fat graft retention and there is a need to standardize methodology.

Impact of upper blepharoplasty, with or without orbicularis oculi muscle removal, on tear film dynamics and dry eye symptoms: A randomized controlled trial.

PURPOSE: Upper blepharoplasty may be related to dry eye symptoms since the function of the orbicularis oculi muscle may affect the tear film. We aimed to assess the effect of blepharoplasty with or without the removal of a strip of orbicularis oculi muscle on tear film dynamics and dry eye symptoms. METHODS: A double-blind, randomized, controlled trial comparing upper blepharoplasty without (group A) or with (group B) orbicularis oculi muscle excision was performed on 54 healthy Caucasian patients. Tear film dynamics and dry eye symptoms were evaluated using multiple dry eye parameters, i.e. tear osmolarity, Schirmer test I, corneal/conjunctival staining, tear break-up time (TBUT), Oxford Scheme, Sicca Ocular Staining Score and Ocular Surface Disease Index questionnaire. All the parameters were assessed preoperatively and 6 and 12 months after upper blepharoplasty. All the groups' outcomes were compared. RESULTS: The differences were not significant between the two upper blepharoplasty techniques regarding most of the above-mentioned outcomes. Subjective symptoms of ocular irritation, consistent with dry eye disease and vision-related impairment, were reduced after upper blepharoplasty independent of the type of the technique applied, while the pre and postoperative outcomes of the objective tear dynamics did not differ 12 months after surgery. However, group B demonstrated a significant increase in tear osmolarity and TBUT at the 6-month follow-up visit. CONCLUSION: An upper blepharoplasty alleviates subjective dry eye complaints in the long term, while not changing the tear dynamics. The improvement was independent of the blepharoplasty technique used.

Reproducibility of 3D scanning in the periorbital region.

The reproducibility of scanning in the periorbital region with 3D technology to enable objective evaluations of surgical treatment in the periorbital region was assessed. Facial 3D-scans of 15 volunteers were captured at different time points with a handheld Artec Space Spider structured light scanner. Two scans were made with a one minute interval and repeated after 1 year; for both a natural head position and with the head in a fixation-device. On assessing the area between the eyelashes and eyebrows, the medians of the average deviations between the various cross-sections of the one minute interval 3D-scans ranged from 0.17 to 0.21 mm at baseline, and from 0.10 to 0.11 mm when the minute-interval scanning was repeated one year later. The systematic differences when scanning in a natural head position and fixated position were comparable. The reproducibility of the 3D processing was excellent (intraclass correlation coefficient > 0.9). The repeated scanning deviations (baseline versus one year data) were well within the accepted clinical threshold of 1 mm. Scanning with a hand-held 3D-scanning device (Artec Space Spider) is a promising tool to assess changes in the periorbital region following surgical treatment since the median deviations are well below the clinically accepted 1 mm measuring error, for both the natural head and fixated positions.

Three-dimensional facial volume analysis using algorithm-based personalized aesthetic templates.

Three-dimensional stereophotogrammetry is commonly used to assess volumetric changes after facial procedures. A lack of clear landmarks in aesthetic regions complicates the reproduction of selected areas in sequential images. A three-dimensional volumetric analysis was developed based on a personalized aesthetic template. The accuracy and reproducibility of this method were assessed. Six female volunteers were photographed using the 3dMDtrio system according to a clinical protocol, twice at baseline (T1) and twice after 1year (T2). A styrofoam head was used as control. A standardized aesthetic template was morphed over the baseline images of the volunteers using a coherent point drift algorithm. The resulting personalized template was projected over all sequential images to assess surface area differences, volume differences, and root mean square errors. In 12 well-defined aesthetic areas, mean average surface area and volume differences between the two T1 images ranged from -7.6mm2 to 10.1mm2 and -0.11cm3 to 0.13cm3, respectively. T1 root mean square errors ranged between 0.24mm and 0.62mm (standard deviation 0.18-0.73mm). Comparable differences were found between the T2 images. An increase in volume between T1 and T2 was only observed for volunteers who gained in body weight. Personalized aesthetic templates are an accurate and reproducible method to assess changes in aesthetic areas.

Volumetric Effect of Pregnancy on a Unilateral Facial Fat Graft.

Weight gain can affect the volume of a facial fat graft, resulting in unfavorable asymmetries. Weight gain during pregnancy is more complex and does not just entail an increase in adipose tissue. This case report objectifies whether pregnancy results in volume changes of a facial fat graft. A 24-year-old woman received a fat graft (7 ml) in the mandibular area to mask a volume deficiency. This deficiency occurred after a fibula reconstruction of a mandibular defect resulting from the removal of an ameloblastoma. The patient became pregnant 3 weeks after the fat graft procedure. Standardized 3-dimensional photographs (3dMD) were available preoperatively and at 7 weeks (first trimester), 6 months (second trimester), 9 months (third trimester), and 14 months (4 months after delivery) postoperatively. Three-dimensional analysis revealed that no substantial volume changes of the fat graft occurred during pregnancy other than the overall proportional gain in facial volume. Pregnancy apparently does not affect the volume of a small unilateral fat graft applied in the facial region.

Bone-borne surgically assisted rapid maxillary expansion: A retrospective three-dimensional evaluation of the asymmetry in expansion.

PURPOSE: Asymmetrical expansion occurs in patients treated with Surgically Assisted Rapid Maxillary Expansion (SARME). In the clinical setting, this asymmetrical expansion is seen in multiple directions. However, the frequency, actual directions and amount of asymmetry are unclear. Hence, the aim of this study was to analyze the directions and amount of asymmetrical lateral expansion in non-syndromic patients with transversal maxillary hypoplasia on employing bone-borne transpalatal distraction by means of SARME. Treatment involved corticotomies of all four bony supports, including pterygomaxillary disjunction. MATERIALS AND METHODS: A retrospective case series was formed from patients treated with SARME. Pre- and postdistraction Cone Beam Computed Tomography scans were superimposed. A reference frame was created to analyze lateral expansion asymmetries in five directions. RESULTS: Clinical relevant asymmetries (>3.0 mm) in at least one of the investigated directions occurred in 55% of the patients. Lateral expansion asymmetries occurred mostly in the inferior-anterior part between the left and right segment and asymmetry in total expansion was noted between the anterior and posterior part of the maxilla. CONCLUSION: This study confirms the clinical suspicion that using SARME with a bone-borne distractor and pterygomaxillary disjunction to treat non-syndromic patients with transversal maxillary hypoplasia, results in regular asymmetrical lateral expansion.

Optimisation of three-dimensional lower jaw resection margin planning using a novel Black Bone magnetic resonance imaging protocol.

BACKGROUND: MRI is the optimal method for sensitive detection of tumour tissue and pre-operative staging in oral cancer. When jawbone resections are necessary, the current standard of care for oral tumour surgery in our hospital is 3D virtual planning from CT data. 3D printed jawbone cutting guides are designed from the CT data. The tumour margins are difficult to visualise on CT, whereas they are clearly visible on MRI scans. The aim of this study was to change the conventional CT-based workflow by developing a method for 3D MRI-based lower jaw models. The MRI-based visualisation of the tumour aids in planning bone resection margins. MATERIALS AND FINDINGS: A workflow for MRI-based 3D surgical planning with bone cutting guides was developed using a four-step approach. Key MRI parameters were defined (phase 1), followed by an application of selected Black Bone MRI sequences on healthy volunteers (phase 2). Three Black Bone MRI sequences were chosen for phase 3: standard, fat saturated, and an out of phase sequence. These protocols were validated by applying them on patients (n = 10) and comparison to corresponding CT data. The mean deviation values between the MRI- and the CT-based models were 0.63, 0.59 and 0.80 mm for the three evaluated Black Bone MRI sequences. Phase 4 entailed examination of the clinical value during surgery, using excellently fitting printed bone cutting guides designed from MRI-based lower jaw models, in two patients with oral cancer. The mean deviation of the resection planes was 2.3 mm, 3.8 mm for the fibula segments, and the mean axis deviation was the fibula segments of 1.9°. CONCLUSIONS: This study offers a method for 3D virtual resection planning and surgery using cutting guides based solely on MRI imaging. Therefore, no additional CT data are required for 3D virtual planning in oral cancer surgery.

Impact of 3D virtual planning on reconstruction of mandibular and maxillary surgical defects in head and neck oncology.

PURPOSE OF REVIEW: This review describes the advances in 3D virtual planning for mandibular and maxillary reconstruction surgical defects with full prosthetic rehabilitation. The primary purpose is to provide an overview of various techniques that apply 3D technology safely in primary and secondary reconstructive cases of patients suffering from head and neck cancer. RECENT FINDINGS: Methods have been developed to overcome the problem of control over the margin during surgery while the crucial decision with regard to resection margin and planning of osteotomies were predetermined by virtual planning. The unlimited possibilities of designing patient-specific implants can result in creative uniquely applied solutions for single cases but should be applied wisely with knowledge of biomechanical engineering principles. SUMMARY: The high surgical accuracy of an executed 3D virtual plan provides tumor margin control during ablative surgery and the possibility of planned combined use of osseus free flaps and dental implants in the reconstruction in one surgical procedure. A thorough understanding of the effects of radiotherapy on the reconstruction, soft tissue management, and prosthetic rehabilitation is imperative in individual cases when deciding to use dental implants in patients who received radiotherapy.

A systematic review of functional outcome and quality of life following reconstruction of maxillofacial defects using vascularized free fibula flaps and dental rehabilitation reveals poor data quality.

BACKGROUND: Reconstruction and oral rehabilitation of segmental maxillofacial defects resulting from ablative surgery is commonly achieved by osteocutaneous vascularized free fibula (VFFF) transplantation combined with implant-supported dental prostheses. We systematically reviewed the literature regarding impact of oral rehabilitation with or without dental implants on functional outcome and quality of life (Qol) following reconstruction of such segmental maxillofacial defects with VFFF. METHODS: This systematic review was performed according to the PRISMA guidelines. A literature search was conducted using the databases of Cochrane, MEDLINE and EMBASE. Relevant search terms for maxilla or mandible, reconstruction with VFFF, and oral rehabilitation were used. Two reviewers independently assessed the publications using eligibility and research quality criteria (MINORS). RESULTS: In total, 554 unique publications were found. After scrutinization, 2 prospective studies and 8 retrospective case-series without comparison were left for ultimate analysis. Quality ranged from 44% to 88% of the maximum score. Overall survival rate of the VFFF was 99% and the survival rate of dental implants was 95%. Speech intelligibility and overall aesthetic outcome were 'good' to 'excellent'. No statistically significant changes in QoL were found. Methods to measure functional outcome varied strongly, making pooling impossible. CONCLUSIONS: Oral rehabilitation with implant-supported dental prostheses after reconstruction of segmental maxillofacial defects with VFFF results in good to excellent speech intelligibility and aesthetics. Results are probably positively biased by the retrospective nature of the studies. In future prospective research, functional outcome measures should be addressed using standardized questionnaires and validated objective tests with adequate follow-up.

Accuracy of secondary maxillofacial reconstruction with prefabricated fibula grafts using 3D planning and guided reconstruction.

BACKGROUND: We compared the pre-operative 3D-surgical plan with the surgical outcome of complex two-stage secondary reconstruction of maxillofacial defects using inserted implants in the prefabricated fibula graft. METHODS: Eleven reconstructions of maxillofacial defects with prefabricated fibulas were performed using a 3D virtual planning. Accuracy of placement of the fibula grafts and dental implants was compared to pre-operative 3D virtual plans by superimposing pre-operative and post-operative CT-scans: we first superimposed the CT-scans on the antagonist jaw, to represent the outcome of occlusion, and then superimposed on the planned fibula segments. RESULTS: Superimposing the CT scans on the antagonist jaws revealed a median deviation of the fibula segments and implants of 4.7 mm (IQR:3-6.5 mm) and 5.5 mm (IQR:2.8-7 mm) from the planned position, respectively. Superimposing of the CT scans on the fibula segments revealed a median difference of fibula and implant placement of 0.3 mm (IQR:0-1.6 mm) and 2.2 mm (IQR:1.5-2.9 mm), respectively. CONCLUSIONS: The final position of the fibula graft is determined by the occlusion of the denture, which is designed from the 3D plan. From a prosthodontic perspective, the accuracy of 3D-surgical planning of reconstruction of maxillofacial defects with a fibula graft and the implants allows for a favorable functional position of the implants and fibula graft.