Who tests for lead and why? A 10-year analysis of blood lead screening, follow-up and CNS outcomes in a statewide US healthcare system.

OBJECTIVES: This study aims to determine (1) which providers in US healthcare systems order lead tests, why and at what frequency and (2) whether current patient population lead levels are predictive of clinical outcomes. METHODS: Retrospective medical record study of all blood lead tests in the Medical University of South Carolina healthcare system 2012-2016 and consequent evidence of central nervous system (CNS)-related disease across a potential 10-year window (2012-2022). RESULTS: Across 4 years, 9726 lead tests resulted for 7181 patients (49.0% female; 0-94 years), representing 0.2% of the hospital population. Most tests were for young (76.6%≤age 3) and non-Hispanic black (47.2%) and Hispanic (26.7%) patients. A wide variety of providers ordered tests; however, most were ordered by paediatrics, psychiatry, internal medicine and neurology. Lead levels ranged from ≤2.0 µg/dL (80.8%) to ≥10 µg/dL (0.8%; max 36 µg/dL). 201 children (3.1%) had initial lead levels over the reference value for case management at the time (5.0 µg/dL). Many high level children did not receive follow-up testing in the system (36.3%) and those that did often failed to see levels fall below 5.0 µg/dL (80.1%). Non-Hispanic black and Hispanic patients were more likely to see lead levels stay high or go up over time. Over follow-up, children with high lead levels were more likely to receive new attention-deficit/hyperactivity disorder and conduct disorder diagnoses and new psychiatric medications. No significant associations were found between lead test results and new CNS diagnoses or medications among adults. CONCLUSIONS: Hospital lead testing covers a small portion of patients but includes a wide range of ages, presentations and provider specialities. Lack of lead decline among many paediatric patients suggests there is room to improve provider guidance around when to test and follow-up.

Unsaturated or saturated dietary fat-mediated steatosis impairs hepatic regeneration following partial hepatectomy in mice.

BACKGROUND: Partial hepatectomy is a preferred treatment option for many patients with hepatocellular carcinoma however, pre-existing pathological abnormalities originating from hepatic steatosis can alter the decision to perform surgery or postoperative outcomes as a consequence of the impact steatosis has on liver regeneration. AIM: The aim of this study was to investigate the role of a saturated or unsaturated high fat diet-mediated steatosis on liver regeneration following partial hepatectomy. METHODS: Mice were fed a low-fat control diet (CD, 13% fat), lard-based unsaturated (LD, 60% fat) or milk-based saturated high fat diet (MD, 60% fat) for 16 weeks at which time partial hepatectomy (approx. 70% resection) was performed. At days-2 and 7 post hepatectomy, one hour prior to euthanization, mice were injected with 5-bromo-2'-deoxyuridine in order to monitor hepatic regeneration. Serum was collected and assessed for levels of ALT and AST. Resected and regenerated liver tissue were examined for inflammation-indicative markers employing RT-PCR, Western blots, and histological methods. RESULTS: Mice fed LD or MD exhibited higher NAFLD scores, increased expression of inflammatory cytokines, neutrophil infiltration, macrophage accumulation, increased apoptosis, and elevated levels of serum ALT and AST activities, a decrease in the number of BrdU-incorporated-hepatocytes in the regenerated livers compared to the mice fed CD. Mice fed MD showed significantly lower percent of BrdU-incorporated hepatocytes and a higher trend of inflammation compared to the mice fed LD. CONCLUSION: A diet rich in saturated or unsaturated fat results in NASH with decreased hepatic regeneration however unsaturated fat diet cause lower inflammation and higher regeneration than the saturated fat diet following partial hepatectomy in mice.

Using the 5C model to understand COVID-19 vaccine hesitancy across a National and South Carolina sample.

Vaccine hesitancy is a serious threat to global health; however, significant COVID-19 vaccine hesitancy exists throughout the United States. The 5C model, which postulates five person-level determinants for vaccine hesitancy - confidence, complacency, constraints, risk calculation, and collective responsibility - provides one theoretical way of understanding COVID-19 vaccine hesitancy. The present study examined the effects of these 5C drivers of vaccine behavior on early vaccine adoption and vaccine intentions above and beyond theoretically salient demographic characteristics and compared these associations across a National sample (n = 1634) and a statewide sample from South Carolina (n = 784) - a state with documented low levels of COVID-19 vaccination uptake. This study used quantitative and qualitative data collected in October 2020 to January 2021 from the MFour-Mobile Research Panel, a large, representative non-probability sample of adult smartphone users. Overall, the South Carolina sample reported lower COVID-19 vaccine intentions and higher levels of 5C barriers to vaccine uptake compared to the National sample. Findings further indicated that both demographic characteristics (race) and certain drivers of vaccine behavior (confidence and collective responsibility) are associated with vaccine trust and intentions across samples above and beyond other variables. Qualitative data indicated that COVID-19 vaccine hesitancy was driven by fears about the quick vaccine development, limited research, and potential side effects. Although there are some limitations to the cross-sectional survey data, the present study offers valuable insight into factors associated with early COVID-19 vaccine hesitancy across the United States.

Prevalence of Depression and Posttraumatic Stress Disorder in Flint, Michigan, 5 Years After the Onset of the Water Crisis.

Importance: Environmental disasters, such as the Flint, Michigan, water crisis, are potentially traumatic events (PTEs) that may precipitate long-term psychiatric disorders. The water crisis was associated with acute elevations in mental health problems in the Flint community, but long-term psychiatric sequelae have not yet been evaluated using standardized diagnostic measures. Objective: To investigate the prevalence of and factors associated with current presumptive diagnostic-level major depression and posttraumatic stress disorder (PTSD) among Flint residents 5 years after the onset of the crisis. Design, Setting, and Participants: In this cross-sectional study, a household probability sample of 1970 adults living in Flint, Michigan, during the crisis were surveyed about their crisis experiences, their psychological symptoms 5 years later, and their access to and use of mental health services in the intervening years. Analyses were weighted to produce population-representative estimates. Main Outcomes and Measures: Presumptive Diagnostic and Statistical Manual of Mental Disorders (Fifth Edition) (DSM-5) diagnostic-level past-year major depression and PTSD. Results: Among 1970 respondents, 1061 of 1946 reporting sex (54.5%) were women; 1043 of 1951 reporting race (53.5%) were Black or African American and 829 (42.5%) were White; and 1895 of 1946 reporting ethnicity (97.4%) were non-Hispanic. Overall, 435 (22.1%) met DSM-5 criteria for presumptive past-year depression, 480 (24.4%) for presumptive past-year PTSD, and 276 (14.0%) for both disorders. Residents who believed that their or their family's health was harmed by contaminated water (eg, risk ratio [RR] for depression: 2.23; 95% CI, 1.80-2.76), who had low confidence in public-official information (eg, RR for PTSD, 1.44; 95% CI, 1.16-1.78), who had previous exposure to PTEs (eg, RR for both disorders: 5.06; 95% CI, 2.99-8.58), or who reported low social support (eg, RR for PTSD, 2.58; 95% CI, 1.94-3.43) had significantly higher risk for depression, PTSD, and comorbidity. PTEs involving prior physical or sexual assault were especially potent risk factors (eg, both disorders: RR, 7.30; 95% CI, 4.30-12.42). Only 685 respondents (34.8%) were ever offered mental health services to assist with water-crisis-related psychiatric symptoms; most (543 [79.3%]) who were offered services utilized them. Conclusions and Relevance: In this cross-sectional study of psychiatric disorder in Flint, Michigan, presumptive depression and PTSD were highly prevalent 5 years after the onset of the water crisis. These findings suggest that public-works environmental disasters have large-scale, long-term psychological sequelae. The Flint community may require expanded mental health services to meet continued psychiatric need. National disaster preparedness and response programs should consider psychiatric outcomes.

Self-Disinfecting Copper Beds Sustain Terminal Cleaning and Disinfection Effects throughout Patient Care.

Microbial burden associated with near-patient touch surfaces results in a greater risk of health care-associated infections (HAIs). Acute care beds may be a critical fomite, as traditional plastic surfaces harbor the highest concentrations of bacteria associated with high-touch surfaces in a hospital room's patient zone. Five high-touch intensive care unit (ICU) bed surfaces encountered by patients, health care workers, and visitors were monitored by routine culture to assess the effect U.S. Environmental Protection Agency (U.S. EPA)-registered antimicrobial copper materials have on the microbial burden. Despite both daily and discharge cleaning and disinfection, each control bed's plastic surfaces exceeded bacterial concentrations recommended subsequent to terminal cleaning and disinfection (TC&D) of 2.5 aerobic CFU/cm2 Beds with self-disinfecting (copper) surfaces harbored significantly fewer bacteria throughout the patient stay than control beds, at levels below those considered to increase the likelihood of HAIs. With adherence to routine daily and terminal cleaning regimes throughout the study, the copper alloy surfaces neither tarnished nor required additional cleaning or special maintenance. Beds encapsulated with U.S. EPA-registered antimicrobial copper materials were found to sustain the microbial burden below the TC&D risk threshold levels throughout the patient stay, suggesting that outfitting acute care beds with such materials may be an important supplement to controlling the concentration of infectious agents and thereby potentially reducing the overall HAI risk.IMPORTANCE Despite cleaning efforts of environmental service teams and substantial compliance with hand hygiene best practices, the microbial burden in patient care settings often exceeds concentrations at which transfer to patients represents a substantial acquisition risk for health care-associated infections (HAIs). Approaches to limit HAI risk have relied on designing health care equipment and furnishings that are easier to clean and/or the use of no-touch disinfection interventions such as germicidal UV irradiation or vapor deposition of hydrogen peroxide. In a clinical trial evaluating the largest fomite in the patient care setting, the bed, a bed was encapsulated with continuously disinfecting antimicrobial copper surfaces, which reduced the bacteria on surfaces by 94% and sustained the microbial burden below the terminal cleaning and disinfection risk threshold throughout the patient's stay. Such an intervention, which continuously limits microbes on high-touch surfaces, should be studied in a broader range of health care settings to determine its potential long-range efficacy for reducing HAI.

In situ evaluation of a persistent disinfectant provides continuous decontamination within the clinical environment.

Microbial bioburden associated with the built environment can impact the rate of health care-associated infection acquisition; higher bioburden results in a greater incidence of health care-associated infections. Two disinfectants registered by the US Environmental Protection Agency and a trial disinfectant were evaluated for their ability to limit the establishment of bioburden subsequent to application under in situ conditions on patient bed rails within a medical intensive care unit. Bioburden samples were collected immediately prior to disinfection and at 1, 6, and 24 hours after application. The trial disinfectant was engineered to provide continuous disinfection over a 24-hour period. Each disinfectant was able to significantly control bioburden for the first hour. In comparison, the persistent agent was found superior for all time points when compared to a dilutable quaternary ammonium agent, and it was significantly better for controlling bioburden for 2 of the 3 times points for the disinfectant with ethanol and quaternary ammonium as its agent.

Analyzing Dental Students' Clinic Production Using Time-Based Relative Value Units: Ten-Year Cross-Cohort Mapping.

The analysis of dental students' clinical production/participation has been used to assess whether a prospective graduate is capable of unsupervised and independent practice (that is, competent to perform that practice). This method and others have inherent biases that may not accurately reflect whether the student has mastered the associated concepts and techniques required for dentistry. The aim of this study was to assess an informatics system that assigned curriculum meta-tags with time-based relative educational value units (ReVUs) to each clinical procedure performed by Medical University of South Carolina (MUSC) students. The system has been used since 1998, but for this study the complete data sets for the MUSC graduating classes of 2007 through 2016 were mapped using microcompetency codes for the dental procedures. In total, 421,494 procedures were formatted and analyzed using software developed to aggregate disparate data sets from clinical activities into a common format for evaluation. The results showed that the ten classes (cohorts) were very consistent with cohort high ReVUs averaging 7,317.1 points, cohort mean ReVUs being 5,180.2 points, and cohort low ReVUs averaging 3,381 points. A detailed analysis of student effort by dental subspecialty found that preventive activities represented 13.4%, patient assessment 32.6%, periodontology 2.8%, restorative dentistry 16.3%, prosthodontics 21.9%, endodontics 6.7%, and oral surgery 5.7% of the total points in the clinical part of the curriculum. In this system, point thresholds can be easily generated to monitor students' progress towards competence for each defined competency and thus assess their progress towards acquiring the skills required for unsupervised, independent practice.

Antimicrobial copper alloys decreased bacteria on stethoscope surfaces.

BACKGROUND: Stethoscopes may serve as vehicles for transmission of bacteria among patients. The aim of this study was to assess the efficacy of antimicrobial copper surfaces to reduce the bacterial concentration associated with stethoscope surfaces. METHODS: A structured prospective trial involving 21 health care providers was conducted at a pediatric emergency division (ED) (n = 14) and an adult medical intensive care unit located in tertiary care facilities (n = 7). Four surfaces common to a stethoscope and a facsimile instrument fabricated from U.S. Environmental Protection Agency-registered antimicrobial copper alloys (AMCus) were assessed for total aerobic colony counts (ACCs), methicillin-resistant Staphylococcus aureus, gram-negative bacteria, and vancomycin-resistant enterococci for 90 days. RESULTS: The mean ACCs collectively recovered from all stethoscope surfaces fabricated from the AMCus were found to carry significantly lower concentrations of bacteria (pediatric ED, 11.7 vs 127.1 colony forming units [CFU]/cm2, P < .00001) than their control equivalents. This observation was independent of health care provider or infection control practices. Absence of recovery of bacteria from the AMCu surfaces (66.3%) was significantly higher (P < .00001) than the control surfaces (22.4%). The urethane rim common to the stethoscopes was the most heavily burdened surface; mean concentrations exceeded the health care-associated infection acquisition concentration (5 CFU/cm2) by at least 25×, supporting that the stethoscope warrants consideration in plans mitigating microbial cross-transmission during patient care. CONCLUSIONS: Stethoscope surfaces fabricated with AMCus were consistently found to harbor fewer bacteria.

Copper alloy surfaces sustain terminal cleaning levels in a rural hospital.

OBJECTIVE: To assess the ability of copper alloy surfaces to mitigate the bacterial burden associated with commonly touched surfaces in conjunction with daily and terminal cleaning in rural hospital settings. DESIGN: A prospective intention-to-treat trial design was used to evaluate the effectiveness of cooper alloy surfaces and respective controls to augment infection control practices under pragmatic conditions. SETTING: Half of the patient rooms in the medical-surgical suite in a 49-bed rural hospital were outfitted with copper alloy materials. The control rooms maintained traditional plastic, metal, and porcelain surfaces. METHODS: The primary outcome was a comparison of the bacterial burden harbored by 20 surfaces and components associated with control and intervention areas for 12 months. Locations were swabbed regardless of the occupancy status of the patient room. Significance was assessed using nonparametric methods employing the Mann-Whitney U test with significance assessed at P < .05. RESULTS: Components fabricated using copper alloys were found to have significantly lower concentrations of bacteria, at or below levels prescribed, upon completion of terminal cleaning. Vacant rooms were found to harbor significant concentrations of bacteria, whereas those fabricated from copper alloys were found to be at or below those concentrations prescribed subsequent to terminal cleaning. CONCLUSIONS: Copper alloys can significantly decrease the burden harbored on high-touch surfaces, and thus warrant inclusion in an integrated infection control strategy for rural hospitals.

Potential effectiveness of copper surfaces in reducing health care-associated infection rates in a pediatric intensive and intermediate care unit: A nonrandomized controlled trial.

BACKGROUND: Studies have consistently shown that copper alloyed surfaces decrease the burden of microorganisms in health care environments. This study assessed whether copper alloy surfaces decreased hospital-associated infections in pediatric intensive and intermediate care units. METHODS: Admitted infants were assigned sequentially to a room furnished with or without a limited number of copper alloyed surfaces. Clinical and exposure to intervention data were collected on a daily basis. To avoid counting infections present prior to admission, patients who stayed in the hospital <72 hours were excluded from analysis. Health care-associated infections (HAIs) were confirmed according to protocol definitions. RESULTS: Clinical outcomes from 515 patients were considered in our analysis: 261 patients from the intervention arm of the study, and 254 from the control arm. Crude analysis showed an HAI rate of 10.6 versus 13.0 per 1,000 patient days for copper- and non-copper-exposed patients, respectively, for a crude relative risk reduction (RRR) of 0.19 (90% confidence interval, 0.46 to -0.22). Conducting clinical trials to assess interventions that may impact HAI rates is very challenging. The results here contribute to our understanding and ability to estimate the effect size that copper alloy surfaces have on HAI acquisition. CONCLUSIONS: Exposure of pediatric patients to copper-surfaced objects in the closed environment of the intensive care unit resulted in decreased HAI rates when compared with noncopper exposure; however, the RRR was not statistically significant. The clinical effect size warrants further consideration of this intervention as a component of a systems-based approach to control HAIs.

Antibacterial Diamines Targeting Bacterial Membranes.

Antibiotic resistance is a growing threat to human health exacerbated by a lack of new antibiotics. We now describe a series of substituted diamines that produce rapid bactericidal activity against both Gram-positive and Gram-negative bacteria, including methicillin-resistant Staphylococcus aureus and stationary-phase bacteria. These compounds reduce biofilm formation and promote biofilm dispersal in Pseudomonas aeruginosa. The most potent analogue, 3 (1,13-bis{[(2,2-diphenyl)-1-ethyl]thioureido}-4,10-diazatridecane), primarily acts by depolarization of the cytoplasmic membrane and permeabilization of the bacterial outer membrane. Transmission electron microscopy confirmed that 3 disrupts membrane integrity rapidly. Compound 3 is also synergistic with kanamycin, demonstrated by the checkerboard method and by time-kill kinetic experiments. In human cell toxicity assays, 3 showed limited adverse effects against the HEK293T human kidney embryonic cells and A549 human adenocarcinoma cells. In addition, 3 produced no adverse effects on Caenorhabditis elegans development, survival, and reproduction. Collectively, diamines related to 3 represent a new class of broad-spectrum antibacterials against drug-resistant pathogens.

Copper surfaces are associated with significantly lower concentrations of bacteria on selected surfaces within a pediatric intensive care unit.

BACKGROUND: Health care-associated infections result in significant patient morbidity and mortality. Although cleaning can remove pathogens present on hospital surfaces, those surfaces may be inadequately cleaned or recontaminated within minutes. Because of copper's inherent and continuous antimicrobial properties, copper surfaces offer a solution to complement cleaning. The objective of this study was to quantitatively assess the bacterial microbial burden coincident with an assessment of the ability of antimicrobial copper to limit the microbial burden associated with 3 surfaces in a pediatric intensive care unit. METHODS: A pragmatic trial was conducted enrolling 1,012 patients from 2 high acuity care units within a 249-bed tertiary care pediatric hospital over 12 months. The microbial burden was determined from 3 frequently encountered surfaces, regardless of room occupancy, twice monthly, from 16 rooms, 8 outfitted normally and 8 outfitted with antimicrobial copper. RESULTS: Copper surfaces were found to be equivalently antimicrobial in pediatric settings to activities reported for adult medical intensive care units. The log10 reduction to the microbial burden from antimicrobial copper surfaced bed rails was 1.996 (99%). Surprisingly, introduction of copper objects to 8 study rooms was found to suppress the microbial burden recovered from objects assessed in control rooms by log10 of 1.863 (73%). CONCLUSION: Copper surfaces warrant serious consideration when contemplating the introduction of no-touch disinfection technologies for reducing burden to limit acquisition of HAIs.

From Laboratory Research to a Clinical Trial: Copper Alloy Surfaces Kill Bacteria and Reduce Hospital-Acquired Infections.

OBJECTIVE: This is a translational science article that discusses copper alloys as antimicrobial environmental surfaces. Bacteria die when they come in contact with copper alloys in laboratory tests. Components made of copper alloys were also found to be efficacious in a clinical trial. BACKGROUND: There are indications that bacteria found on frequently touched environmental surfaces play a role in infection transmission. METHODS: In laboratory testing, copper alloy samples were inoculated with bacteria. In clinical trials, the amount of live bacteria on the surfaces of hospital components made of copper alloys, as well as those made from standard materials, was measured. Finally, infection rates were tracked in the hospital rooms with the copper components and compared to those found in the rooms containing the standard components. RESULTS: Greater than a 99.9% reduction in live bacteria was realized in laboratory tests. In the clinical trials, an 83% reduction in bacteria was seen on the copper alloy components, when compared to the surfaces made from standard materials in the control rooms. Finally, the infection rates were found to be reduced by 58% in patient rooms with components made of copper, when compared to patients' rooms with components made of standard materials. CONCLUSIONS: Bacteria die on copper alloy surfaces in both the laboratory and the hospital rooms. Infection rates were lowered in those hospital rooms containing copper components. Thus, based on the presented information, the placement of copper alloy components, in the built environment, may have the potential to reduce not only hospital-acquired infections but also patient treatment costs.

Mitochondrial uncoupling protein 2 induces cell cycle arrest and necrotic cell death.

Uncoupling protein 2 (UCP2) is a mitochondrial membrane protein that regulates energy metabolism and reactive oxygen species (ROS) production. We generated mouse carboxy- and amino-terminal green fluorescent protein (GFP)-tagged UCP2 constructs to investigate the effect of UCP2 expression on cell proliferation and viability. UCP2-transfected Hepa 1-6 cells did not show reduced cellular adenosine triphosphate (ATP) but showed increased levels of glutathione. Flow cytometry analysis indicated that transfected cells were less proliferative than nontransfected controls, with most cells blocked at the G1 phase. The effect of UCP2 on cell cycle arrest could not be reversed by providing exogenous ATP or oxidant supply, and was not affected by the chemical uncoupler carbonyl cyanide-p-trifluoromethoxyphenylhydrazone (FCCP). However, this effect of UCP2 was augmented by treatment with genistein, a tyrosine kinase inhibitor, which by itself did not affect cell proliferation on control hepatocytes. Western blotting analysis revealed decreased expression levels of CDK6 but not CDK2 and D-type cyclins. Examination of cell viability in UCP2-transfected cells with Trypan Blue and Annexin-V staining revealed that UCP2 transfection led to significantly increased cell death. However, characteristics of apoptosis were absent in UCP2-transfected Hepa 1-6 cells, including lack of oligonucleosomal fragmentation (laddering) of chromosomal DNA, release of cytochrome c from mitochondria, and cleavage of caspase-3. In conclusion, our results indicate that UCP2 induces cell cycle arrest at G1 phase and causes nonapoptotic cell death, suggesting that UCP2 may act as a powerful influence on hepatic regeneration and cell death in the steatotic liver.

Intereukin-10 and Kupffer cells protect steatotic mice livers from ischemia-reperfusion injury.

Steatotic livers are more sensitive to ischemia/reperfusion (I/R) and are thus routinely rejected for transplantation because of their increased rate of primary nonfunction (PNF). Lean livers have less I/R-induced damage and inflammation due to Kupffer cells (KC), which are protective after total, warm, hepatic I/R with associated bowel congestion. This protection has been linked to KC-dependent expression of the potent anti-inflammatory cytokine interleukin-10 (IL-10). We hypothesized that pretreatment with exogenous IL-10 would protect the steatotic livers of genetically obese (ob/ob) mice from inflammation and injury induced by I/R. Lean and ob/ob mice were pretreated with either IL-10 or liposomally-encapsulated bisphosphonate clodronate (shown to deplete KC) prior to total, warm, hepatic I/R. IL-10 pretreatment increased survival of ob/ob animals at 24 hrs post-I/R from 30% to 100%, and significantly decreased serum ALT levels. At six hrs post-I/R, IL-10 pretreatment increased IL-10 mRNA expression, but suppressed up-regulation of the pro-inflammatory cytokine IL-1ß mRNA. However, ALT levels were elevated at six hrs post-I/R in KC-depleted animals. These data reveal that pretreatment with IL-10 protects steatotic livers undergoing I/R, and that phagocytically active KC retain a hepatoprotective role in the steatotic environment.

Cerulenin blockade of fatty acid synthase reverses hepatic steatosis in ob/ob mice.

Fatty liver or hepatic steatosis is a common health problem associated with abnormal liver function and increased susceptibility to ischemia/reperfusion injury. The objective of this study was to investigate the effect of the fatty acid synthase inhibitor cerulenin on hepatic function in steatotic ob/ob mice. Different dosages of cerulenin were administered intraperitoneally to ob/ob mice for 2 to 7 days. Body weight, serum AST/ALT, hepatic energy state, and gene expression patterns in ob/ob mice were examined. We found that cerulenin treatment markedly improved hepatic function in ob/ob mice. Serum AST/ALT levels were significantly decreased and hepatic ATP levels increased in treated obese mice compared to obese controls, accompanied by fat depletion in the hepatocyte. Expression of peroxisome proliferator-activated receptors α and γ and uncoupling protein 2 were suppressed with cerulenin treatment and paralleled changes in AST/ALT levels. Hepatic glutathione content were increased in some cases and apoptotic activity in the steatotic livers was minimally changed with cerulenin treatment. In conclusion, these results demonstrate that fatty acid synthase blockade constitutes a novel therapeutic strategy for altering hepatic steatosis at non-stressed states in obese livers.

Copper surfaces reduce the rate of healthcare-acquired infections in the intensive care unit.

OBJECTIVE. Healthcare-acquired infections (HAIs) cause substantial patient morbidity and mortality. Items in the environment harbor microorganisms that may contribute to HAIs. Reduction in surface bioburden may be an effective strategy to reduce HAIs. The inherent biocidal properties of copper surfaces offer a theoretical advantage to conventional cleaning, as the effect is continuous rather than episodic. We sought to determine whether placement of copper alloy-surfaced objects in an intensive care unit (ICU) reduced the risk of HAI. DESIGN. Intention-to-treat randomized control trial between July 12, 2010, and June 14, 2011. SETTINg. The ICUs of 3 hospitals. PATIENTS. Patients presenting for admission to the ICU. METHODS. Patients were randomly placed in available rooms with or without copper alloy surfaces, and the rates of incident HAI and/or colonization with methicillin-resistant Staphylococcus aureus (MRSA) or vancomycin-resistant Enterococcus (VRE) in each type of room were compared. RESULTS. The rate of HAI and/or MRSA or VRE colonization in ICU rooms with copper alloy surfaces was significantly lower than that in standard ICU rooms (0.071 vs 0.123; P = .020). For HAI only, the rate was reduced from 0.081 to 0.034 (P = .013). CONCLUSIONs. Patients cared for in ICU rooms with copper alloy surfaces had a significantly lower rate of incident HAI and/or colonization with MRSA or VRE than did patients treated in standard rooms. Additional studies are needed to determine the clinical effect of copper alloy surfaces in additional patient populations and settings.