Summary report of second EUFEPS/AAPS conference on global harmonization in bioequivalence.

The Global Bioequivalence Harmonization Initiative (GBHI) was launched by the Network on Bioavailability and Biopharmaceutics (BABP) under the auspices of European Federation for Pharmaceutical Sciences (EUFEPS) several years ago. Since 2015, EUFEPS in collaboration with the American Association of Pharmaceutical Scientists (AAPS) has organized three international conferences to support global harmonization of regulatory requirements for bioequivalence (BE) assessment. These conferences provided an open forum for pharmaceutical scientists from academia, industry and regulatory agencies to discuss various BE topics at issue. The current report summarizes the discussion of BE issues at the 2nd GBHI conference held in 2016, Rockville, USA. Three important BE topics were discussed at the meeting: (a) prodrugs and compounds with pre-systemic extraction, (b) scaling procedures and two-stage designs, and (c) exclusion of pharmacokinetic data in BE assessment. The presentations and discussions of these issues have enhanced the mutual understanding of scientific background for BE evaluation and further facilitated harmonization of regulatory approaches for establishing BE of multisource drug products.

Optimal adaptive sequential designs for crossover bioequivalence studies.

In prior works, this group demonstrated the feasibility of valid adaptive sequential designs for crossover bioequivalence studies. In this paper, we extend the prior work to optimize adaptive sequential designs over a range of geometric mean test/reference ratios (GMRs) of 70-143% within each of two ranges of intra-subject coefficient of variation (10-30% and 30-55%). These designs also introduce a futility decision for stopping the study after the first stage if there is sufficiently low likelihood of meeting bioequivalence criteria if the second stage were completed, as well as an upper limit on total study size. The optimized designs exhibited substantially improved performance characteristics over our previous adaptive sequential designs. Even though the optimized designs avoided undue inflation of type I error and maintained power at ≥ 80%, their average sample sizes were similar to or less than those of conventional single stage designs.

A Bioequivalence Approach for Generic Narrow Therapeutic Index Drugs: Evaluation of the Reference-Scaled Approach and Variability Comparison Criterion.

Various health communities have expressed concerns regarding whether average bioequivalence (BE) limits (80.00-125.00%) for the 90% confidence interval of the test-to-reference geometric mean ratio are sufficient to ensure therapeutic equivalence between a generic narrow therapeutic index (NTI) drug and its reference listed drug (RLD). Simulations were conducted to investigate the impact of different BE approaches for NTI drugs on study power, including (1) direct tightening of average BE limits and (2) a scaled average BE approach where BE limits are tightened based on the RLD's within-subject variability. Addition of a variability comparison (using a one-tailed F test) increased the difficulty for generic NTIs more variable than their corresponding RLDs to demonstrate bioequivalence. Based on these results, the authors evaluate the fully replicated, 2-sequence, 2-treatment, 4-period crossover study design for NTI drugs where the test product demonstrates BE based on a scaled average bioequivalence criterion and a within-subject variability comparison criterion.

Use of partial AUC (PAUC) to evaluate bioequivalence--a case study with complex absorption: methylphenidate.

PURPOSE: Methylphenidate modified-release products produce early and late peak concentrations critical for treatment of morning and afternoon symptoms of attention deficit hyperactivity disorder (ADHD). Standard bioequivalence (BE) criteria cannot be applied to these products. The performance of partial area under the drug concentration-time curve (PAUC), Cmax and AUCINF to assess BE were independently evaluated for two products. METHODS: A two-stage analysis was performed on plasma data for two methylphenidate modified-release products (Product 1 and 2). Simulations using the fitted parameters determined how changes in fast absorption rate constant (K0Fast) and fraction available (F1) affected curve shape and BE determination using Cmax, AUCINF and PAUC. RESULTS: The sensitivity of the mean PAUC(test)/PAUC(reference) ratios to changes in K0Fast(test) are product dependent. Product 1 mean PAUC(test)/PAUC(reference) ratios for PAUC0-4h are more responsive to both decreases and increases in K0Fast(test) than Product 2. Product 2 showed a greater response in the mean PAUC(test)/PAUC(reference) ratio for PAUC0-4h when the K0Fast(test) is decreased and less response as the value is increased. CONCLUSIONS: PAUC estimated curve shape is sensitive to changes in absorption and are product specific, and may require a new PAUC metric for each drug. A non-product specific metric to assess curve shape is warranted.

Implementation of a reference-scaled average bioequivalence approach for highly variable generic drug products by the US Food and Drug Administration.

Highly variable (HV) drugs are defined as those for which within-subject variability (%CV) in bioequivalence (BE) measures is 30% or greater. Because of this high variability, studies designed to show whether generic HV drugs are bioequivalent to their corresponding HV reference drugs may need to enroll large numbers of subjects even when the products have no significant mean differences. To avoid unnecessary human testing, the US Food and Drug Administration's Office of Generic Drugs developed a reference-scaled average bioequivalence (RSABE) approach, whereby the BE acceptance limits are scaled to the variability of the reference product. For an acceptable RSABE study, an HV generic drug product must meet the scaled BE limit and a point estimate constraint. The approach has been implemented successfully. To date, the RSABE approach has supported four full approvals and one tentative approval of HV generic drug products.

Additional results for 'Sequential design approaches for bioequivalence studies with crossover designs'.

In 2008, this group published a paper on approaches for two-stage crossover bioequivalence (BE) studies that allowed for the reestimation of the second-stage sample size based on the variance estimated from the first-stage results. The sequential methods considered used an assumed GMR of 0.95 as part of the method for determining power and sample size. This note adds results for an assumed GMR = 0.90. Two of the methods recommended for GMR = 0.95 in the earlier paper have some unacceptable increases in Type I error rate when the GMR is changed to 0.90. If a sponsor wants to assume 0.90 for the GMR, Method D is recommended. Copyright © 2011 John Wiley & Sons, Ltd.

Evaluation of a scaling approach for the bioequivalence of highly variable drugs.

Various approaches for evaluating the bioequivalence (BE) of highly variable drugs (CV > or = 30%) have been debated for many years. More recently, the FDA conducted research to evaluate one such approach: scaled average BE. A main objective of this study was to determine the impact of scaled average BE on study power, and compare it to the method commonly applied currently (average BE). Three-sequence, three period, two treatment partially replicated cross-over BE studies were simulated in S-Plus. Average BE criteria, using 80-125% limits on the 90% confidence intervals for C (max) and AUC geometric mean ratios, as well as scaled average BE were applied to the results. The percent of studies passing BE was determined under different conditions. Variables tested included within subject variability, point estimate constraint, and different values for sigma(w0), which is a constant set by the regulatory agency. The simulation results demonstrated higher study power with scaled average BE, compared to average BE, as within subject variability increased. At 60% CV, study power was more than 90% for scaled average BE, compared with about 22% for average BE. A sigma(w0) value of 0.25 appears to work best. The results of this research project suggest that scaled average BE, using a partial replicate design, is a good approach for the evaluation of BE of highly variable drugs.

Sequential design approaches for bioequivalence studies with crossover designs.

The planning of bioequivalence (BE) studies, as for any clinical trial, requires a priori specification of an effect size for the determination of power and an assumption about the variance. The specified effect size may be overly optimistic, leading to an underpowered study. The assumed variance can be either too small or too large, leading, respectively, to studies that are underpowered or overly large. There has been much work in the clinical trials field on various types of sequential designs that include sample size reestimation after the trial is started, but these have seen only little use in BE studies. The purpose of this work was to validate at least one such method for crossover design BE studies. Specifically, we considered sample size reestimation for a two-stage trial based on the variance estimated from the first stage. We identified two methods based on Pocock's method for group sequential trials that met our requirement for at most negligible increase in type I error rate.

Bioequivalence approaches for highly variable drugs and drug products.

Over the past decade, concerns have been expressed increasingly regarding the difficulty for highly variable drugs and drug products (%CV greater than 30) to meet the standard bioequivalence (BE) criteria using a reasonable number of study subjects. The topic has been discussed on numerous occasions at national and international meetings. Despite the lack of a universally accepted solution for the issue, regulatory agencies generally agree that an adjustment of the traditional BE limits for these drugs or products may be warranted to alleviate the resource burden of studying relatively large numbers of subjects in bioequivalence trials. This report summarizes a careful examination of all the statistical methods available and extensive simulations for BE assessment of highly variable drugs/products. Herein, the authors present an approach of scaling an average BE criterion to the within-subject variability of the reference product in a crossover BE study, together with a point-estimate constraint imposed on the geometric mean ratio between the test and reference products. The use of a reference-scaling approach involves the determination of variability of the reference product, which requires replication of the reference treatment in each individual. A partial replicated-treatment design with this new data analysis methodology will thus provide a more efficient design for BE studies with highly variable drugs and drug products.

Stability, dose uniformity, and palatability of three counterterrorism drugs-human subject and electronic tongue studies.

PURPOSE: These studies evaluated the ability of common household food and drink products to mask the bitter taste of three selected anti-terrorism drugs. METHODS: Three anti-terrorism drugs (doxycycline, ciprofloxacin hydrochloride, and potassium iodide) were mixed with a variety of common household food and drinks, and healthy adult volunteers evaluated the resulting taste and aftertaste. In parallel, the ASTREE Electronic Tongue was used to evaluate taste combinations. Stability of the mixtures over time was monitored, as was the dosage uniformity across preparations. RESULTS: Foods and drinks were identified that satisfactorily masked the bitter flavor of each drug. Dose uniformity and stability were also acceptable over the range studied, although some combinations were significantly less stable than others. The electronic tongue was able to differentiate between tastes, but ranked masking agents in a different order than human volunteers. CONCLUSIONS: Doxycycline, potassium iodide, and ciprofloxacin, which are stockpiled in solid tablet form, can conveniently be prepared into more palatable formulations, using common household foods and drinks. The electronic tongue can be used to perform an initial screening for palatability.