Physico-Chemical Investigation and Antimicrobial Efficacy of Ozonated Oils: The Case Study of Commercial Ozonated Olive and Sunflower Seed Refined Oils.

Drug resistance represents one of the great plagues of our time worldwide. This largely limits the treatment of common infections and requires the development of new antibiotics or other alternative approaches. Noteworthy, the indiscriminate use of antibiotics is mostly responsible for the selection of mutations that confer drug resistance to microbes. In this regard, recently, ozone has been raising interest for its unique biological properties when dissolved in natural oils. Ozonated oils have been reported to act in a non-specific way on microorganisms hindering the acquisition of advantageous mutations that result in resistance. Here, we focused on the antimicrobial effect of two commercial olive (OOO) and sunflower seeds (OSO) oils. Nuclear magnetic resonance spectroscopy and thermal analysis showed the change in the chemical composition of the oils after ozonation treatment. Different ozonated oil concentrations were then used to evaluate their antimicrobial profile against Candida albicans, Enterococcus faecalis, Staphylococcus aureus, Klebsiella pneumoniae, Pseudomonas aeruginosa, and Escherichia coli by agar diffusion and broth dilution methods. Cytotoxicity was also evaluated in keratinocytes and epithelial cells. Overall, our results revealed that both OOO and OSO showed a potent microbicidal effect, especially against C. albicans (IC50 = OOO: 0.3 mg/mL and OSO: 0.2 mg/mL) and E. faecalis (IC50 = OOO: 0.4 mg/mL and OSO: 2.8 mg/mL) albeit exerting a certain effect also against S. aureus and E. coli. Moreover, both OOO and OSO do not yield any relevant cytotoxic effect at the active concentrations in both cell lines. This indicates that the ozonated oils studied are not toxic for mammalian cells despite exerting a potent antimicrobial effect on specific microorganisms. Therefore, OOO and OSO may be considered to integrate standard therapies in the treatment of common infections, likely overcoming drug resistance issues.

Benzothiazole DNA gyrase inhibitors and their conjugates with siderophore mimics: design, synthesis and evaluation.

Benzothiazole-based bacterial DNA gyrase and topoisomerase IV inhibitors are promising new antibacterial agents with potent activity against Gram-positive and Gram-negative bacterial strains. The aim of this study was to improve the uptake of these inhibitors into the cytoplasm of Gram-negative bacteria by conjugating them to the small siderophore mimics. The best conjugate 18b displayed potent Escherichia coli DNA gyrase and topoisomerase IV inhibition. The interaction analysis of molecular dynamics simulation trajectory showed the important contribution of the siderophore mimic moiety to binding affinity. By NMR spectroscopy, we demonstrated that the hydroxypyridinone moiety alone was responsible for the chelation of iron(iii). Moreover, 18b showed an enhancement of antibacterial activity against E. coli JW5503 in an iron-depleted medium, clearly indicating an increased uptake of 18b in this bacterial strain.

The combination of inorganic phosphate and pyrophosphate 31 P-NMR for the electrodeless pH determination in the 5-12 range.

Potentiometry is the primary pH measurement method, but alternatives are sought beyond glass electrodes operative limitations. In nuclear magnetic resonance (NMR) experiments, electrodeless pH sensing is important to track changes along titrations, during chemical reactions or inside compartmentalized environments inaccessible to electrodes, for instance. Although several interesting NMR pH indicators have been already presented, the potential of inorganic phosphate is overlooked, despite its common presence in NMR samples as the buffer main component. Its use for electrodeless pH determination can be expanded by exploiting all its three proton dissociations. This study was aimed at verifying the use of inorganic phosphate 31 P chemical shift to sense pH variations, and at exploring the complementary use of pyrophosphate ions to cover a wide pH range. A simple set of equations is presented to utilize both phosphate and pyrophosphate 31 P chemical shift in combination for accurate pH determination without a glass electrode over the 5-12 pH range, and without affecting the spectrum of other nuclei. The present study demonstrated an average deviation of 0.09 (maximum <0.2) pH unit from glass electrode measurements. The trimethylphosphate can be used as a suitable chemical shift reference for both 31 P and 1 H (also 13 C), with its hydrolysis being significant only at pH > 12. The method was also demonstrated by determining the pKa of three distinct molecules in a mixture and by comparing the results to those obtained when the glass electrode was used to measure the pH. The approach shown here can be easily tuned to different experimental conditions.

Glyphosate sensing in aqueous solutions by fluorescent zinc(II) complexes of [9]aneN3-based receptors.

Herein we describe the binding abilities of Zn(II) complexes of [12]aneN4- (L1) and [9]aneN3-based receptors (L2, L3) towards the herbicides N-(phosphonomethyl)glycine (glyphosate, H3PMG) and 2-amino-4-[hydroxy(methyl)phosphoryl]butanoic acid (glufosinate, H2GLU), and also aminomethylphosphonic acid (H2AMPA), the main metabolite of H3PMG, and phosphate. All ligands form stable Zn(II) complexes, whose coordination geometries allow a possible interaction of the metal center with exogenous anionic substrates. Potentiometric studies evidenced the marked coordination ability of the L2/Zn(II) system for the analytes considered, with a preferential binding affinity for H3PMG over the other substrates, in a wide range of pH values. 1H and 31P NMR experiments supported the effective coordination of such substrates by the Zn(II) complex of L2, while fluorescence titrations and a test strip experiment were performed to evaluate whether the H3PMG recognition processes could be detected by fluorescence signaling.

A Simulation Model for the Non-Electrogenic Uniport Carrier-Assisted Transport of Ions across Lipid Membranes.

Impressive work has been completed in recent decades on the transmembrane anion transport capability of small synthetic transporters from many different structural classes. However, very few predicting models have been proposed for the fast screening of compound libraries before spending time and resources on the laboratory bench for their synthesis. In this work, a new approach is presented which aims at describing the transport process by taking all the steps into explicit consideration, and includes all possible experiment-derived parameters. The algorithm is able to simulate the macroscopic experiments performed with lipid vesicles to assess the ion-transport ability of the synthetic transporters following a non-electrogenic uniport mechanism. While keeping calculation time affordable, the final goal is the curve-fitting of real experimental data-so, to obtain both an analysis and a predictive tool. The role and the relative weight of the different parameters is discussed and the agreement with the literature is shown by using the simulations of a virtual benchmark case. The fitting of real experimental curves is also shown for two transporters of different structural type.

Permeation of ß-Lactamase Inhibitors through the General Porins of Gram-Negative Bacteria.

Modern medicine relies upon antibiotics, but we have arrived to the point where our inability to come up with new effective molecules against resistant pathogens, together with the declining private investment, is resulting in the number of untreatable infections increasing worldwide at worrying pace. Among other pathogens, widely recognized institutions have indicated Gram-negative bacteria as particularly challenging, due to the presence of the outer membrane. The very first step in the action of every antibiotic or adjuvant is the permeation through this membrane, with small hydrophilic drugs usually crossing through protein channels. Thus, a detailed understanding of their properties at a molecular level is crucial. By making use of Molecular Dynamics simulations, we compared the two main porins of four members of the Enterobacteriaceae family, and, in this paper, we show their shared geometrical and electrostatic characteristics. Then, we used metadynamics simulations to reconstruct the free energy for permeation of selected diazobicyclooctans through OmpF. We demonstrate how porins features are coupled to those of the translocating species, modulating their passive permeation. In particular, we show that the minimal projection area of a molecule is a better descriptor than its molecular mass or the volume. Together with the magnitude and orientation of the electric dipole moment, these are the crucial parameters to gain an efficient compensation between the entropic and enthalpic contributions to the free energy barrier required for permeation. Our results confirm the possibility to predict the permeability of molecules through porins by using a few molecular parameters and bolster the general model according to which the free energy increase is mostly due to the decrease of conformational entropy, and this can be compensated by a favorable alignment of the electric dipole with respect to the channel intrinsic electric field.

Aza- and Mixed Thia/Aza-Macrocyclic Receptors with Quinoline-Bearing Pendant Arms for Optical Discrimination of Zinc(II) or Cadmium(II) Ions.

The synthesis and coordination properties of two fluorescent chemosensors, featuring [9]aneN3 (1,4,7-triazacyclononane; L1) and [12]aneNS3 (1-aza-4,7,10-trithiacyclododecane; L2) as receptor units, and a quinoline pendant arm with an amide group as a functional group spacer are described. The optical responses of L1 and L2 in the presence of several metal ions were analysed in MeCN/H2 O (1 : 4 v/v) solutions. A selective chelation enhancement of fluorescence (CHEF) effect was observed in the presence of Zn2+ in the case of L1, and in the presence of Cd2+ in the case of L2, following the formation of a 1 : 1 and a 1 : 2 metal/ligand complex, respectively, which was also confirmed by potentiometric measurements. 1 H and 13 C NMR measurements in CD3 CN/CDCl3 in combination with molecular mechanics calculations show that for both complexes of L1 and L2 with Zn2+ and Cd2+ , respectively, the coordination of the carbonyl group from the pendant arm could be the origin of the observed optical selectivity.

[9]aneN3-based fluorescent receptors for metal ion sensing, featuring urea and amide functional groups.

We describe here the synthesis and coordination properties of three new derivatives of [9]aneN3 containing phenyl/quinoline pendant arm derivatives (L1, L2 and L3, respectively) also featuring urea (L1-L2) or amide (L3) functions as "non-innocent" spacers. At first, L1, L2 and L3 were studied considering the interaction with a series of anions (AcO-, BzO-, H2PO4-, F-, and Cl-) by means of 1H NMR measurements. Subsequently, the optical responses of L2 and L3 in the presence of several metal ions Cd2+, Co2+, Cu2+, Fe3+, Hg2+, K+, Mg2+, Mn2+, Ni2+, Zn2+ and Pb2 were analysed in MeCN/H2O (4 : 1 v/v). As observed by spectrophotometric and spectrofluorimetric titrations, there were significant changes in the absorbance and fluorescent emission of L2 upon addition of increasing amounts of Cd2+, Zn2+, Pb2+ and Cu2+ in MeCN/H2O (4 : 1 v/v). In particular, titrations of L2 with Cd2+, Zn2+ or Pb2+ showed an almost comparable CHEF effect up to an M2+/L2 molar ratio of 1. Overall, no significant optical selectivity was observed in the case of L2. Conversely, L3 revealed an OFF-ON selective response only in the presence of the Zn2+ ion in MeCN/H2O (4 : 1 v/v), which can be attributed to the formation of both 1 : 1 and 1 : 2 metal-to-ligand complexes, as also confirmed by potentiometric measurements. Finally, crystals of [ZnL1(Ac)](Ac) (1), [CuL1(Cl)](Cl)·H2O (2) and [CuL3](NO3) (3) were grown and analysed by X-ray diffraction. 1 and 3 feature the metal center in a pseudo-octahedral coordination geometry coordinated also by the carbonyl group from one pendant arm, while in the case of 2, one of the six coordination sites in the final distorted octahedral geometry is occupied by the nitrogen donor from the urea group of one pendant arm.

Complexes formed by the siderophore-based monosulfactam antibiotic BAL30072 and their interaction with the outer membrane receptor PiuA of P. aeruginosa.

Nuclear magnetic resonance and infrared spectroscopy have been used to investigate the formation of complexes of BAL30072 with Fe3+ and Ga3+ in solution and to collect geometrical parameters supporting reliable 3D structure models. Structural models for the ligand-metal complexes with different stoichiometries have been characterized using density functional theory calculations. Blind ensemble docking to the PiuA receptor from P. aeruginosa was performed for the different complexes to compare binding affinities and statistics of the residues most frequently contacted. When compared to analogues, BAL30072 was found to have an intrinsic propensity to form complexes with low ligand-to-metal stoichiometry. By using one of the sulfate oxygen atoms as a third donor in addition to the bidentate pyridinone moiety, BAL30072 can form a L2M complex, which was predicted to be the one with the best binding affinity to PiuA. The example of BAL30072 strongly suggests that a lower stoichiometry might be the one recognized by the receptor, so that to focus only on the highest stoichiometry might be misleading for siderophores with less than six donors.

Folded Structure and Membrane Affinity of the N-Terminal Domain of the Three Human Isoforms of the Mitochondrial Voltage-Dependent Anion-Selective Channel.

Voltage-dependent anion-selective channels (VDACs) are primarily located in the mitochondrial outer membrane (MOM). They are essential for the regulation of ion and metabolite exchanges. In particular, their role in energy-related nucleotide exchange has many implications in apoptosis, cancer, and neurodegenerative diseases. It has been proposed that VDACs' functions are regulated by mobility of the N-terminal helical domain, which is bound to the inner wall of the main ß-barrel domain but exists in equilibrium between the bound-folded and the unbound-unfolded state. When the N-terminal domain detaches from the channel's wall and eventually leaves the lumen, it can either stay exposed to the cytosolic environment or interact with the outer leaflet of the MOM; then, it may also interact with other protein partners. In humans, three different VDAC isoforms are expressed at different tissue-specific levels with evidence of distinct roles. Although the N-terminal domains share high sequence similarity, important differences do exist, with the functionality of the entire protein mostly attributed to them. In this work, the three-dimensional structure and membrane affinity of the three isolated hVDAC N-terminal peptides have been compared through Fourier-transform infrared and NMR spectroscopy in combination with molecular dynamics simulations, and measurement of the surface pressure of lipid monolayers. Although peptides were studied as isolated from the ß-barrel domain, the observed differences are relevant for those whole protein's functions in which a protein-protein interaction is mediated by the N-terminal domain.

Effects of amphipathic profile regularization on structural order and interaction with membrane models of two highly cationic branched peptides with ß-sheet propensity.

Antimicrobial peptides attracted increasing interest in last decades due to the rising concern of multi-drug resistant pathogens. Dendrimeric peptides are branched molecules with multiple copies of one peptide functional unit bound to the central core. Compared to linear analogues, they usually show improved activity and lower susceptibility to proteases. Knowledge of structure-function relationship is fundamental to tailor their properties. This work is focused on SB056, the smallest example of dendrimeric peptide, whose amino acid sequence is WKKIRVRLSA. Two copies are bound to the α- and ε- nitrogen of one lysine core. An 8-aminooctanamide was added at the C-terminus to improve membrane affinity. Its propensity for ß-type structures is also interesting, since helical peptides were already thoroughly studied. Moreover, SB056 maintains activity at physiological osmolarity, a typical limitation of natural peptides. An optimized analogue with improved performance was designed, ß-SB056, which differs only in the relative position of the first two residues (KWKIRVRLSA). This produced remarkable differences. Structure order and aggregation behavior were characterized by using complementary techniques and membrane models with different negative charge. Infrared spectroscopy showed different propensity for ordered ß-sheets. Lipid monolayers' surface pressure was measured to estimate the area/peptide and the ability to perturb lipid packing. Fluorescence spectroscopy was applied to compare peptide insertion into the lipid bilayer. Such small change in primary structure produced fundamental differences in their aggregation behavior. A regular amphipathic peptide's primary structure was responsible for ordered ß-sheets in a charge independent fashion, in contrast to unordered aggregates formed by the former analogue.

Bacterial Outer Membrane Porins as Electrostatic Nanosieves: Exploring Transport Rules of Small Polar Molecules.

Transport of molecules through biological membranes is a fundamental process in biology, facilitated by selective channels and general pores. The architecture of some outer membrane pores in Gram-negative bacteria, common to other eukaryotic pores, suggests them as prototypes of electrostatically regulated nanosieve devices. In this study, we sensed the internal electrostatics of the two most abundant outer membrane channels of Escherichia coli, using norfloxacin as a dipolar probe in single molecule electrophysiology. The voltage dependence of the association rate constant of norfloxacin interacting with these nanochannels follows an exponential trend, unexpected for neutral molecules. We combined electrophysiology, channel mutagenesis, and enhanced sampling molecular dynamics simulations to explain this molecular mechanism. Voltage and temperature dependent ion current measurements allowed us to quantify the transversal electric field inside the channel as well as the distance where the applied potential drops. Finally, we proposed a general model for transport of polar molecules through these electrostatic nanosieves. Our model helps to further understand the basis for permeability in Gram-negative pathogens, contributing to fill in the innovation gap that has limited the discovery of effective antibiotics in the last 20 years.

General Method to Determine the Flux of Charged Molecules through Nanopores Applied to ß-Lactamase Inhibitors and OmpF.

A major challenge in the discovery of the new antibiotics against Gram-negative bacteria is to achieve sufficiently fast permeation in order to avoid high doses causing toxic side effects. So far, suitable assays for quantifying the uptake of charged antibiotics into bacteria are lacking. We apply an electrophysiological zero-current assay using concentration gradients of ß-lactamase inhibitors combined with single-channel conductance to quantify their flux rates through OmpF. Molecular dynamic simulations provide in addition details on the interactions between the nanopore wall and the charged solutes. In particular, the interaction barrier for three ß-lactamase inhibitors is surprisingly as low as 3-5 kcal/mol and only slightly above the diffusion barrier of ions such as chloride. Within our macroscopic constant field model, we determine that at a zero-membrane potential a concentration gradient of 10 µM of avibactam, sulbactam, or tazobactam can create flux rates of roughly 620 molecules/s per OmpF trimer.

Rationalizing the permeation of polar antibiotics into Gram-negative bacteria.

The increasing level of antibiotic resistance in Gram-negative bacteria, together with the lack of new potential drug scaffolds in the pipeline, make the problem of infectious diseases a global challenge for modern medicine. The main reason that Gram-negative bacteria are particularly challenging is the presence of an outer cell-protecting membrane, which is not present in Gram-positive species. Such an asymmetric bilayer is a highly effective barrier for polar molecules. Several protein systems are expressed in the outer membrane to control the internal concentration of both nutrients and noxious species, in particular: (i) water-filled channels that modulate the permeation of polar molecules and ions according to concentration gradients, and (ii) efflux pumps to actively expel toxic compounds. Thus, besides expressing specific enzymes for drugs degradation, Gram-negative bacteria can also resist by modulating the influx and efflux of antibiotics, keeping the internal concentration low. However, there are no direct and robust experimental methods capable of measuring the permeability of small molecules, thus severely limiting our knowledge of the molecular mechanisms that ultimately control the permeation of antibiotics through the outer membrane. This is the innovation gap to be filled for Gram-negative bacteria. This review is focused on the permeation of small molecules through porins, considered the main path for the entry of polar antibiotics into Gram-negative bacteria. A fundamental understanding of how these proteins are able to filter small molecules is a prerequisite to design/optimize antibacterials with improved permeation. The level of sophistication of modern molecular modeling algorithms and the advances in new computer hardware has made the simulation of such complex processes possible at the molecular level. In this work we aim to share our experience and perspectives in the context of a multidisciplinary extended collaboration within the IMI-Translocation consortium. The synergistic combination of structural data, in vitro assays and computer simulations has proven to give new insights towards the identification and description of physico-chemical properties modulating permeation. Once similar general rules are identified, we believe that the use of virtual screening techniques will be very helpful in searching for new molecular scaffolds with enhanced permeation, and that molecular modeling will be of fundamental assistance to the optimization stage.

Nanostructure of Surface Films on Ni18P Alloy in Sulfate Solutions by the Maximum Entropy Method.

NiP alloys are very often used in industry, due to their outstanding performance in corrosion and wear. Alloys with high phosphorus content (≥16 atom % P) are amorphous and show high corrosion resistance in both neutral and acidic solutions irrespective of the presence of chloride ions. The reason for this behavior is attributed to the formation of a "P-enriched surface layer" whose exact nature is still under debate. In this work, an iterative algorithm based on the application of maximum entropy method on nondestructive angle-resolved X-ray photoelectron spectroscopy data has been applied to the investigation of the surface layer grown on Ni18P alloys following mechanical polishing and anodic polarization in sulfate solutions. The results show that the outermost region of the examined alloy has a complex layered structure: (1) an uppermost hydrocarbon contamination layer about 1 nm thick, which includes also adsorbed water; (2) a nickel (poly)phosphate layer of about 1 nm; (3) a highly phosphorus-enriched interface being about 2 nm thick with a marked phosphorus concentration gradient, from 70 to 20 atom %; and (4) bulk alloy with the stoichiometric composition. These findings, together with the chemical state of the different phosphorus compounds, allow us to conclude that the high corrosion and wear resistance of NiP alloys might be ascribed to the presence of a thin, self-repairing nickel (poly)phosphate layer grown on a strongly P-enriched interface. Because the Auger parameter of P at the interface is similar to that of elemental P, it might be also concluded that the interface is enriched in elemental phosphorus.

The singular behavior of a ß-type semi-synthetic two branched polypeptide: three-dimensional structure and mode of action.

Dendrimeric peptides make a versatile group of bioactive peptidomimetics and a potential new class of antimicrobial agents to tackle the pressing threat of multi-drug resistant pathogens. These are branched supramolecular assemblies where multiple copies of the bioactive unit are linked to a central core. Beyond their antimicrobial activity, dendrimeric peptides could also be designed to functionalize the surface of nanoparticles or materials for other medical uses. Despite these properties, however, little is known about the structure-function relationship of such compounds, which is key to unveil the fundamental physico-chemical parameters and design analogues with desired attributes. To close this gap, we focused on a semi-synthetic, two-branched peptide, SB056, endowed with remarkable activity against both Gram-positive and Gram-negative bacteria and limited cytotoxicity. SB056 can be considered the smallest prototypical dendrimeric peptide, with the core restricted to a single lysine residue and only two copies of the same highly cationic 10-mer polypeptide; an octanamide tail is present at the C-terminus. Combining NMR and Molecular Dynamics simulations, we have determined the 3D structure of two analogues. Fluorescence spectroscopy was applied to investigate the water-bilayer partition in the presence of vesicles of variable charge. Vesicle leakage assays were also performed and the experimental data were analyzed by applying an iterative Monte Carlo scheme to estimate the minimum number of bound peptides needed to achieve the release. We unveiled a singular beta hairpin-type structure determined by the peptide chains only, with the octanamide tail available for further functionalization to add new potential properties without affecting the structure.

Exploiting the porin pathway for polar compound delivery into Gram-negative bacteria.

BACKGROUND: In Gram-negative bacteria, the outer-membrane represents an additional barrier for antibiotics to permeate inside pathogens. Our inability to come up with novel effective antibiotics mostly relies upon insufficient understanding of the molecular basis behind outer-membrane penetration. RESULTS: Polar antibiotics can permeate through water-filled porins, such as OmpF and OmpC from Escherichia coli. Through molecular modeling, permeation of imipenem and meropenem was found to be strongly dependent upon capability of drugs to properly align their electric dipole to the internal electric field in the restricted region of the pore. Electrostatics differences between OmpF and OmpC, and modifications along a series of OmpC mutants from E. coli-resistant clinical strains identify a 'preorientation' region, which dramatically affects antibiotic pathway. CONCLUSION: A novel perspective is presented, suggesting new molecular properties to be included in drug design.

Macroscopic electric field inside water-filled biological nanopores.

Multi-drug resistance bacteria are a challenging problem of contemporary medicine. This is particularly critical for Gram-negative bacteria, where antibiotics are hindered by the outer membrane to reach internal targets. Here more polar antibiotics make use of nanometric water-filled channels to permeate inside. We present in this work a computational all-atom approach, using water as a probe, for the calculation of the macroscopic electric field inside water-filled channels. The method allows one to compare not only different systems but also the same system under different conditions, such as pH and ion concentration. This provides a detailed picture of electrostatics in biological nanopores shedding more light on how the charged residues of proteins determine the electric field inside, and also how medium can tune it. These details are central to unveil the filtering mechanism behind the permeation of small polar molecules through nanometric water-filled channels.

A computational study of ion current modulation in hVDAC3 induced by disulfide bonds.

The human VDAC channel exists in three isoforms characterized by high sequence homology and structural similarity. Yet the function and mode of action of hVDAC3 are still elusive. The presence of six surface cysteines exposed to the oxidizing environment of the mitochondrial inter-membrane space suggests the possible establishment of intramolecular disulfide bonds. Two natural candidates for disulfide bridge formation are Cys2 and Cys8 that, located on the flexible N-terminal domain, can easily come in contact. A third potentially important residue is Cys122 that is close to Cys2 in the homology model of VDAC3. Here we analyzed the impact of SS bonds through molecular dynamics simulations of derivatives of hVDAC3 (dubbed SS-2-8, SS-2-122, SS-8-122) including a single disulfide bond. Simulations showed that in SS-8-122, the fragment 1-7 crosses the top part of the barrel partially occluding the pore and causing a 20% drop of conductance. In order to identify other potential channel-occluding disulfide bonds, we used a set of neural networks and structural bioinformatics algorithms, after filtering with the steric constraints imposed by the 3D-structure. We identified other three species, namely SS-8-65, SS-2-36 and SS-8-36. While the conductance of SS-8-65 and SS-2-36 is about 30% lower than that of the species without disulfide bonds, the conductance of SS-8-36 was 40-50% lower. The results show how VDAC3 is able to modulate its pore size and current by exploiting the mobility of the N-terminal and forming, upon external stimuli, disulfide bridges with cysteine residues located on the barrel and exposed to the inter-membrane space.

Fluorescent asymmetric bis-ureas for pyrophosphate recognition in pure water.

Three fluorescent asymmetric bis-urea receptors (L1-L3) have been synthesised. The binding properties of L1-L3 towards different anions (fluoride, acetate, hydrogencarbonate, dihydrogen phosphate, and hydrogen pyrophosphate HPpi(3-)) have been studied by means of (1)H-NMR, UV-Vis and fluorescence spectroscopy, single crystal X-ray diffraction, and theoretical calculations. In particular, a remarkable affinity for HPpi(3-) has been observed in the case L1 (DMSO-d6/0.5% H2O) which also acts as a fluorimetric chemosensor for this anion. Interestingly, when L1 is included in cetyltrimethylammonium (CTAB) micelles, hydrogen pyrophosphate recognition can also be achieved in pure water.