Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 8 de 8
Filtrar
Más filtros











Base de datos
Intervalo de año de publicación
2.
Chem Commun (Camb) ; 46(27): 4971-3, 2010 Jul 21.
Artículo en Inglés | MEDLINE | ID: mdl-20508893

RESUMEN

High quality and monodispersed CdTe nanocrystals with tunable emission spectra ranging from 516 nm to 650 nm were synthesized by a highly reproducible microwave method.

3.
Nat Mater ; 7(7): 522-3, 2008 Jul.
Artículo en Inglés | MEDLINE | ID: mdl-18574479
5.
Nano Lett ; 6(12): 2916-9, 2006 Dec.
Artículo en Inglés | MEDLINE | ID: mdl-17163730

RESUMEN

Field-effect transistor structures based on polydiacetylene (PDA) derivatives have been fabricated. Monolayer channels of UV polymerized pentacosa-10,12-diynoic ethanolamide exhibit modulation of source-drain current on application of a gating voltage. Comparison of the two-dimensional crystal morphology of this material with several closely related derivatives that show no gating suggests that a high degree of alignment and order in the polymer chains is necessary for the observed transistor action.

6.
Langmuir ; 22(10): 4734-40, 2006 May 09.
Artículo en Inglés | MEDLINE | ID: mdl-16649789

RESUMEN

We present a procedure to fabricate extremely smooth Au films supported on thin elastomeric (PDMS) substrates. Minimum rms roughness and largest grain size are obtained using Si wafers, coated with native oxide and release layers, as templates for the growth of thermally evaporated Au films. The wafers are held at a temperature of 300 degrees C during deposition. The Au films, up to 200 nm thick, are then transferred onto poly(dimethylsiloxane) substrates which have been previously surface-functionalized with a (3-mercaptopropyl)trimethoxysilane adhesion layer. The resulting Au films have been found by AFM to be extremely smooth with rms-roughness 2.5-4 angstroms and to exhibit a crystalline morphology with flat grains >500 nm in size. Thinner films, down to 20 nm, are grown at lower temperature and are comparably smooth, but with a loss in crystalline morphology. We compare the results of this optimized procedure with other gold films grown on mica sheets as templates and to those produced using Ti-O-Si interfacial chemistry.

7.
Langmuir ; 21(11): 5034-9, 2005 May 24.
Artículo en Inglés | MEDLINE | ID: mdl-15896047

RESUMEN

Self-assembled monolayers (SAMs) of the aromatic diisocyanides, 1,4-phenylenediisocyanide, 2,3,5,6-tetramethyl-1,4-phenylenediisocyanide, 4,4'-biphenyldiisocyanide, 3,3',5,5'-tetramethyl-4,4'-biphenyldiisocyanide, and 4,4' '-p-terphenyldiisocyanide, were prepared on gold and palladium surfaces. The SAMs were characterized by ellipsometry, polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS), and grazing-angle attenuated total reflectance infrared spectroscopy (GATR). Based on the position of the metal-coordinated isocyanide stretching band, the SAMs on gold were found to bind in the terminal (eta(1)) geometry, while the SAMs on palladium prefer a different geometry which is possibly a triply bridging (mu(3)-eta(1)) geometry. A side-reaction of the unbound isocyanide in the SAM was identified as oxidation to an isocyanate group.

8.
Science ; 304(5667): 62-3, 2004 Apr 02.
Artículo en Inglés | MEDLINE | ID: mdl-15064410
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA