RESUMEN
A new architecture has become necessary owing to the power consumption and latency problems of the von Neumann architecture. A neuromorphic memory system is a promising candidate for the new system as it has the potential to process large amounts of digital information. A crossbar array (CA), which consists of a selector and a resistor, is the basic building block for the new system. Despite the excellent prospects of crossbar arrays, the biggest obstacle for them is sneak current, which can cause a misreading between the adjacent memory cells, thus resulting in a misoperation in the arrays. The chalcogenide-based ovonic threshold switch (OTS) is a powerful selector with highly nonlinear I-V characteristics that can be used to address the sneak current problem. In this study, we evaluated the electrical characteristics of an OTS with a TiN/GeTe/TiN structure. This device shows nonlinear DC I-V characteristics, an excellent endurance of up to 109 in the burst read measurement, and a stable threshold voltage below 15 mV/dec. In addition, at temperatures below 300 °C, the device exhibits good thermal stability and retains an amorphous structure, which is a strong indication of the aforementioned electrical characteristics.
RESUMEN
This paper describes the resistive switching of a cross-point cell array device, with a junction area of 100 nm x 100 nm, fabricated using ultraviolet nanoimprinting. A GdO(x) and Cu-doped MoO(x) stack with platinum top and bottom electrodes served as the resistive switching layer, which shows analog memory characteristics with a resistance ratio greater than 10. To demonstrate a neural network circuit, we operated the cell array device as an electrically modifiable synapse array circuit and carried out a weighted sum operation. This demonstration of cross-point arrays, based on resistive switching memory, opens the way for feasible ultra-high density synapse circuits for future large-scale neural network systems.