RESUMEN
Reliable and predictive experimental models are urgently needed to study metastatic mechanisms of ovarian cancer cells in the omentum. Although models for ovarian cancer cell adhesion and invasion were previously investigated, the lack of certain omental cell types, which influence the metastatic behavior of cancer cells, limits the application of these tissue models. Here, we describe a 3D multi-cellular human omentum tissue model, which considers the spatial arrangement of five omental cell types. Reproducible tissue models were fabricated combining permeable cell culture inserts and bioprinting technology to mimic metastatic processes of immortalized and patient-derived ovarian cancer cells. The implementation of an endothelial barrier further allowed studying the interaction between cancer and endothelial cells during hematogenous dissemination and the impact of chemotherapeutic drugs. This proof-of-concept study may serve as a platform for patient-specific investigations in personalized oncology in the future.
Asunto(s)
Epiplón , Neoplasias Ováricas , Humanos , Femenino , Epiplón/metabolismo , Epiplón/patología , Células Endoteliales/metabolismo , Neoplasias Ováricas/patología , Células Cultivadas , Técnicas de Cultivo de CélulaRESUMEN
Cells continuously exert forces on their environment and respond to changes in mechanical forces by altering their behaviour. Many pathologies such as cancer and fibrosis are hallmarked by dysregulation in the extracellular matrix, driving aberrant behaviour through mechanotransduction pathways. We demonstrate that substrate stiffness can be used to regulate cellular endocytosis of particles in a size-dependent fashion. Culture of A549 epithelial cells and J774A.1 macrophages on polystyrene/glass (stiff) and polydimethylsiloxane (soft) substrates indicated that particle uptake is increased up to six times for A549 and two times for macrophages when cells are grown in softer environments. Furthermore, we altered surface characteristics through the attachment of submicron-sized particles as a method to locally engineer substrate stiffness and topography to investigate the biomechanical changes which occurred within adherent epithelial cells, i.e. characterization of A549 cell spreading and focal adhesion maturation. Consequently, decreasing substrate rigidity and particle-based topography led to a reduction of focal adhesion size. Moreover, expression levels of Yes-associated protein were found to correlate with the degree of particle endocytosis. A thorough appreciation of the mechanical cues may lead to improved solutions to optimize nanomedicine approaches for treatment of cancer and other diseases with abnormal mechanosignalling.
Asunto(s)
Mecanotransducción Celular , Poliestirenos , Proteínas Señalizadoras YAP , Células Epiteliales , Adhesión Celular , Macrófagos , DimetilpolisiloxanosRESUMEN
Generation of amplified stimulated emission inside mammalian cells has paved the way for a novel bioimaging and cell sensing approach. Single cells carrying gain media (e.g., fluorescent molecules) are placed inside an optical cavity, allowing the production of intracellular laser emission upon sufficient optical pumping. Here, we investigate the possibility to trigger another amplified emission phenomenon (i.e., amplified spontaneous emission or ASE) inside two different cell types, namely macrophage and epithelial cells from different species and tissues, in the presence of a poorly reflecting cavity. Furthermore, the resulting ASE properties can be enhanced by introducing plasmonic nanoparticles. The presence of gold nanoparticles (AuNPs) in rhodamine 6G-labeled A549 epithelial cells results in higher intensity and lowered ASE threshold in comparison to cells without nanoparticles, due to the effect of plasmonic field enhancement. An increase in intracellular concentration of AuNPs in rhodamine 6G-labeled macrophages is, however, responsible for the twofold increase in the ASE threshold and a reduction in the ASE intensity, dominantly due to a suppressed in and out-coupling of light at high nanoparticle concentrations.
Asunto(s)
Oro , Nanopartículas del Metal , Resonancia por Plasmón de Superficie/métodosRESUMEN
The possibility to produce laser action involving biomaterials, in particular (single) biological cells, has fostered the development of cellular lasers as a novel approach in biophotonics. In this respect, cells that are engineered to carry gain medium (e.g., fluorescent dyes or proteins) are placed inside an optical cavity (i.e., typically a sandwich of highly reflective mirrors), allowing the generation of stimulated emission upon sufficient optical pumping. In another scenario, micron-sized optical resonators supporting whispering-gallery mode (WGM) or semiconductor-based laser probes can be internalized by the cells and support light amplification. This review summarizes the recent advances in the fields of biolasers and cellular lasers, and most importantly, highlights their potential applications in the fields of in vitro and in vivo cell imaging and analysis. They include biosensing (e.g., in vitro detection of sodium chloride (NaCl) concentration), cancer cell imaging, laser-emission-based microscope, cell tracking, cell distinction study, and tissue contraction monitoring in zebrafish. Lastly, several fundamental issues in developing cellular lasers including laser probe fabrication, biocompatibility of the system, and alteration of local refractive index of optical cavities due to protein absorption or probe aggregation are described. Cellular lasers are foreseen as a promising tool to study numerous biological and biophysical phenomena. STATEMENT OF SIGNIFICANCE: Biolasers are generation of laser involving biological materials. Biomaterials, including single cells, can be engineered to incorporate laser probes or fluorescent proteins or fluorophores, and the resulting light emission can be coupled to optical resonator, allowing generation of cellular laser emission upon optical pumping. Unlike fluorescence, this stimulated emission is very sensitive and is capable of detecting small alterations in the optical property of the cells and their environment. In this review, recent development and applications of cellular lasers in the fields of in vitro and in vivo cell imaging, cell tracking, biosensing, and cell/tissue analysis are highlighted. Several challenges in developing cellular lasers including probe fabrication and biocompatibility as well as alteration of cellular environment are explained.
Asunto(s)
Rayos Láser , Pez Cebra , Animales , Materiales Biocompatibles , Rastreo Celular , Colorantes FluorescentesRESUMEN
Commercial static cell culture substrates can usually not change their physical properties over time, resulting in a limited representation of the variation in biomechanical cues in vivo. To overcome this limitation, approaches incorporating gold nanoparticles to act as transducers to external stimuli have been employed. In this work, gold nanorods were embedded in an elastomeric matrix and used as photothermal transducers to fabricate biocompatible light-responsive substrates. The nanocomposite films analysed by lock-in thermography and nanoindentation show a homogeneous heat distribution and a greater stiffness when irradiated with NIR light. After irradiation, the initial stiffness values were recovered. In vitro experiments performed during NIR irradiation with NIH-3T3 fibroblasts demonstrated that these films were biocompatible and cells remained viable. Cells cultured on the light stiffened nanocomposite exhibited a greater proliferation rate and stronger focal adhesion clustering, indicating increased cell-surface binding strength.
RESUMEN
Cancer cells generally exhibit higher metabolic demands relative to that of normal tissue cells. This offers great possibilities to exploit metabolic glycoengineering in combination with bio-orthogonal chemistry reactions to achieve tumour site-targeted therapeutic delivery. This work addresses the selectivity of metabolic glycan labelling in diseased (i.e., cancer) versus normal cells grown in a multicellular environment. Dibenzocylooctyne (DBCO)-bearing acetylated-d-mannosamine (Ac4ManNDBCO) was synthesised to metabolically label three different types of cell lines originating from the human lung tissues: A549 adenocarcinomic alveolar basal epithelial cells, MeT5A non-cancerous mesothelial cells, and MRC5 non-cancerous fibroblasts. These cell lines displayed different labelling sensitivity, which trended with their doubling time in the following order: A549 ≈ MeT5A > MRC5. The higher metabolic labelling efficiency inherently led to a higher extent of specific binding and accumulation of the clickable N3-conjugated gold nanoparticles (N3-AuNps, core diameter = 30 nm) in the DBCO-glycan modified A549 and MeT5A cells, but to a less prominent effect in MRC5 cells. These findings demonstrate that relative rates of cell metabolism can be exploited using metabolic labelling to recruit nanotherapeutics whilst minimising non-specific targeting of surrounding tissues.
Asunto(s)
Ciclooctanos/metabolismo , Sistemas de Liberación de Medicamentos , Oro/metabolismo , Hexosaminas/metabolismo , Nanopartículas del Metal/química , Polisacáridos/metabolismo , Línea Celular , Química Clic , Ciclooctanos/química , Células Epiteliales/química , Células Epiteliales/metabolismo , Fibroblastos/química , Fibroblastos/metabolismo , Oro/química , Hexosaminas/química , Humanos , Estructura Molecular , Tamaño de la Partícula , Polisacáridos/química , Propiedades de SuperficieRESUMEN
Tissue models mimic the complex 3D structure of human tissues, which allows the study of pathologies and the development of new therapeutic strategies. The introduction of perfusion overcomes the diffusion limitation and enables the formation of larger tissue constructs. Furthermore, it provides the possibility to investigate the effects of hematogenously administered medications. In this study, the applicability of hydrophilic polytetrafluoroethylene (PTFE) membranes as vessel-like constructs for further use in perfused tissue models is evaluated. The presented approach allows the formation of stable and leakproof tubes with a mean diameter of 654.7 µm and a wall thickness of 84.2 µm. A polydimethylsiloxane (PDMS) chip acts as a perfusion bioreactor and provides sterile conditions. As proof of concept, endothelial cells adhere to the tube's wall, express vascular endothelial cadherin (VE-cadherin) between neighboring cells, and resist perfusion at a shear rate of 0.036 N m-2 for 48 h. Furthermore, the endothelial cell layer delays significantly the diffusion of fluorescently labeled molecules into the surrounding collagen matrix and leads to a twofold reduced diffusion velocity. This approach represents a cost-effective alternative to introduce stable vessel-like constructs into tissue models, which allows adapting the surrounding matrix to the tissue properties in vivo.
Asunto(s)
Reactores Biológicos , Carbono/química , Dendrímeros/química , Nanotubos de Carbono/química , Politetrafluoroetileno/química , Puntos Cuánticos , Prótesis Vascular , Adhesión Celular , Línea Celular , Dimetilpolisiloxanos/química , Células Endoteliales , Colorantes Fluorescentes/química , Humanos , Técnicas In Vitro , Microscopía Electrónica de Rastreo , Perfusión , Diseño de Prótesis , Estrés Mecánico , Resistencia a la Tracción , Ingeniería de Tejidos/métodosRESUMEN
Cellular surface recognition and behavior are driven by a host of physical and chemical features which have been exploited to influence particle-cell interactions. Mechanical and topographical cues define the physical milieu which plays an important role in defining a range of cellular activities such as material recognition, adhesion, and migration through cytoskeletal organization and signaling. In order to elucidate the effect of local mechanical and topographical features generated by the adsorption of particles to an underlying surface on primary human monocyte-derived macrophages (MDM), a series of poly(N-isopropylacrylamide) (pNIPAM) particles with differing rigidity are self-assembled to form a defined particle-decorated surface. Assembly of particle-decorated surfaces is facilitated by modification of the underlying glass to possess a positive charge through functionalization using 3-aminopropyltriethoxysilane (APTES) or coating with poly(L-lysine) (PLL). MDMs are noted to preferentially remove particles with higher degrees of crosslinking (stiffer) than those with lower degrees of crosslinking (softer). Alterations to the surface density of particles enabled a greater area of the particle-decorated surface to be cleared. Uniquely, the impact of particle adsorption is evinced to have a direct impact on topographical recognition of the surface, suggesting a novel approach for controllably affecting cell-surface recognition and response.
Asunto(s)
Vidrio , Macrófagos , Adsorción , Humanos , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Purified collagen possesses weak mechanical properties, hindering its broad application in tissue engineering. Strategies based on manipulating the hydrogel to induce fiber formation or incorporate nanomaterials have been proposed to overcome this issue. Herein, we use a microfluidic device to fabricate, for the first time, collagen hydrogels with aligned and oriented fibers doped with gold nanoparticles and carbon nanotubes. Results based on rheology, atomic force microscopy, and scanning electron microscopy reveal the formation of aligned and oriented collagen fibers possessing greater rigidity and stiffness on the doped hydrogels in comparison with native collagen. The mechanical properties of the hydrogels increased with the nanomaterial loading percentage and the stiffest formulations were those prepared in the presence of carbon nanotubes. We further evaluate the in vitro response of NIH-3T3 fibroblasts to the change in stiffness. The cells were found to be viable on all substrates with directional cell growth observed for the carbon nanotube-doped collagen fibers. No significant differences in the cell area, aspect ratio, and intensification of focal adhesions driven by the increase in stiffness were noted. Nonetheless, fibroblast proliferation and secretion of TGF-ß1 were greater on the hydrogels doped with carbon nanotubes. This nanomaterial-collagen composite provides unique features for cell and tissue substrate applications.
Asunto(s)
Nanopartículas del Metal , Nanocompuestos , Nanotubos de Carbono , Animales , Colágeno/química , Fibroblastos/metabolismo , Oro/metabolismo , Hidrogeles/química , Ratones , Células 3T3 NIH , Nanocompuestos/química , Nanotubos de Carbono/químicaRESUMEN
The presence of ascites in the peritoneal cavity leads to morphological and functional changes of the peritoneal mesothelial cell layer. Cells loose cell-cell interactions, rearrange their cytoskeleton, activate the production of fibronectin, and change their cell surface morphology in a proinflammatory environment. Moreover, ovarian cancer cell adhesion has been shown to be facilitated by these changes due to increased integrin- and CD44-mediated binding sites. In this study, the biological responsiveness of the human pleural mesothelial cell line MeT-5A to patient-derived and artificial ascites was studied in vitro and adhesion of ovarian cancer cells, i.e. SKOV-3 cells, investigated. Changes were mainly observed in cells exposed to artificial ascites containing higher cytokine concentrations than patient-derived ascites. Interestingly, reduced cell-cell interactions were already observed in untreated MeT-5A cells and effects on tight junction protein expression and permeability upon exposure to ascites were minor. Ascites induced upregulation of CDC42 effector protein 2 expression, which affects stress fiber formation, however significant F-actin reorganization was not observed. Moreover, fibronectin production remained unchanged. Analysis of mesothelial cell surface characteristics showed upregulated expression of intercellular adhesion molecule 1, slightly increased hyaluronic acid secretion and decreased microvillus expression upon exposure to ascites. Nevertheless, the observed changes were not sufficient to facilitate adhesion of SKOV-3 cells on MeT-5A cell layer. This study revealed that MeT-5A cells show a reduced biological responsiveness to the presence of ascites, in contrast to published studies on primary human peritoneal mesothelial cells.
Asunto(s)
Adhesión Celular/efectos de los fármacos , Citocinas/farmacología , Neoplasias Mesoteliales/tratamiento farmacológico , Neoplasias Ováricas/tratamiento farmacológico , Ascitis/metabolismo , Ascitis/patología , Línea Celular Tumoral , Citocinas/metabolismo , Células Epiteliales/metabolismo , Células Epiteliales/patología , Femenino , Regulación Neoplásica de la Expresión Génica/efectos de los fármacos , Humanos , Receptores de Hialuranos/genética , Integrina beta1/genética , Molécula 1 de Adhesión Intercelular/genética , Neoplasias Mesoteliales/genética , Neoplasias Mesoteliales/metabolismo , Neoplasias Mesoteliales/patología , Neoplasias Ováricas/genética , Neoplasias Ováricas/metabolismo , Neoplasias Ováricas/patología , Pacientes , Peritoneo/química , Peritoneo/metabolismo , Transducción de Señal/genética , Proteína de Unión al GTP cdc42/genéticaRESUMEN
The extracellular matrix (ECM) plays critical roles in tumor progression and metastasis. However, the contribution of ECM proteins to early metastatic onset in the peritoneal cavity remains unexplored. Here, we suggest a new route of metastasis through the interaction of integrin alpha 2 (ITGA2) with collagens enriched in the tumor coinciding with poor outcome in patients with ovarian cancer. Using multiple gene-edited cell lines and patient-derived samples, we demonstrate that ITGA2 triggers cancer cell adhesion to collagen, promotes cell migration, anoikis resistance, mesothelial clearance, and peritoneal metastasis in vitro and in vivo. Mechanistically, phosphoproteomics identify an ITGA2-dependent phosphorylation of focal adhesion kinase and mitogen-activated protein kinase pathway leading to enhanced oncogenic properties. Consequently, specific inhibition of ITGA2-mediated cancer cell-collagen interaction or targeting focal adhesion signaling may present an opportunity for therapeutic intervention of metastatic spread in ovarian cancer.
Asunto(s)
Colágeno/metabolismo , Integrina alfa2/metabolismo , Metástasis de la Neoplasia/fisiopatología , Epiplón/fisiopatología , Peritoneo/fisiopatología , Animales , Carcinoma Epitelial de Ovario/metabolismo , Línea Celular Tumoral , Femenino , Ratones , Pez CebraRESUMEN
In vitro three-dimensional (3D) lung cell models have been thoroughly investigated in recent years and provide a reliable tool to assess the hazard associated with nanomaterials (NMs) released into the air. In this study, a 3D lung co-culture model was optimized to assess the hazard potential of multiwalled carbon nanotubes (MWCNTs), which is known to provoke inflammation and fibrosis, critical adverse outcomes linked to acute and prolonged NM exposure. The lung co-cultures were exposed to MWCNTs at the air-liquid interface (ALI) using the VITROCELL® Cloud system while considering realistic occupational exposure doses. The co-culture model was composed of three human cell lines: alveolar epithelial cells (A549), fibroblasts (MRC-5), and macrophages (differentiated THP-1). The model was exposed to two types of MWCNTs (Mitsui-7 and Nanocyl) at different concentrations (2-10 µg/cm2) to assess the proinflammatory as well as the profibrotic responses after acute (24 h, one exposure) and prolonged (96 h, repeated exposures) exposure cycles. The results showed that acute or prolonged exposure to different concentrations of the tested MWCNTs did not induce cytotoxicity or apparent profibrotic response; however, suggested the onset of proinflammatory response.
Asunto(s)
Células Epiteliales Alveolares/metabolismo , Fibroblastos/metabolismo , Macrófagos Alveolares/metabolismo , Modelos Biológicos , Nanotubos de Carbono/efectos adversos , Células A549 , Aerosoles , Células Epiteliales Alveolares/patología , Fibroblastos/patología , Humanos , Inflamación/inducido químicamente , Inflamación/metabolismo , Macrófagos Alveolares/patología , Células THP-1RESUMEN
Biological structures have emerged through millennia of evolution, and nature has fine-tuned the material properties in order to optimise the structure-function relationship. Following this paradigm, polydopamine (PDA), which was found to be crucial for the adhesion of mussels to wet surfaces, was hence initially introduced as a coating substance to increase the chemical reactivity and surface adhesion properties. Structurally, polydopamine is very similar to melanin, which is a pigment of human skin responsible for the protection of underlying skin layers by efficiently absorbing light with potentially harmful wavelengths. Recent findings have shown the subsequent release of the energy (in the form of heat) upon light excitation, presenting it as an ideal candidate for photothermal applications. Thus, polydopamine can both be used to (i) coat nanoparticle surfaces and to (ii) form capsules and ultra-small (nano)particles/nanocomposites while retaining bulk characteristics (i.e., biocompatibility, stability under UV irradiation, heat conversion, and activity during photoacoustic imaging). Due to the aforementioned properties, polydopamine-based materials have since been tested in adhesive and in energy-related as well as in a range of medical applications such as for tumour ablation, imaging, and drug delivery. In this review, we focus upon how different forms of the material can be synthesised and the use of polydopamine in biological and biomedical applications.
RESUMEN
The plausibility of human exposure to microplastics has increased within the last years. Microplastics have been found in different food types including seafood, salt, sugar and beverages. So far, human health effects of microplastics after ingestion are unknown. Herein, we designed a novel, three-dimensional in vitro intestinal model consisting of the human intestinal epithelial cell lines Caco-2 and HT29-MTX-E12 as well as human blood monocyte-derived macrophages and dendritic cells that is suitable to assess the possible effects of ingested microplastics. Relevant microplastic particles (in the order of 50-500 µm), including polymers representing tire wear and polyolefins, which represent major sources of microplastic in the EU, were compared to other polymer classes and an inorganic microparticle, healing earth, which is intended for human consumption. Microplastic particles were exposed at concentrations of 823.5-1380.0 µg/cm2 to the model using a dry powder insufflator system to aerosolize the particles directly on the intestinal model's surface. Cytotoxicity was investigated after 6, 24 and 48 h of exposure via measuring the release of lactate dehydrogenase. Inflammatory end points including the cytokines IL-8, TNFα and IL-1ß as well as changes of the barrier integrity after exposure were additionally monitored. We demonstrated that all of the microplastics and the healing earth particles did not cause any significant cytotoxicity or release of (pro-)inflammatory cytokines and did not change the barrier integrity of the co-culture at any of the time points investigated.
Asunto(s)
Células Dendríticas/efectos de los fármacos , Mucosa Intestinal/efectos de los fármacos , Macrófagos/efectos de los fármacos , Microplásticos/toxicidad , Aerosoles , Células CACO-2 , Supervivencia Celular/efectos de los fármacos , Técnicas de Cocultivo , Citocinas/metabolismo , Células Dendríticas/inmunología , Células Dendríticas/metabolismo , Impedancia Eléctrica , Células HT29 , Humanos , Mediadores de Inflamación/metabolismo , Mucosa Intestinal/inmunología , Mucosa Intestinal/metabolismo , Macrófagos/inmunología , Macrófagos/metabolismo , Tamaño de la Partícula , Permeabilidad , Medición de Riesgo , Factores de TiempoRESUMEN
Increasing ethical and biological concerns require a paradigm shift toward animal-free testing strategies for drug testing and hazard assessments. To this end, the application of bioprinting technology in the field of biomedicine is driving a rapid progress in tissue engineering. In particular, standardized and reproducible in vitro models produced by three-dimensional (3D) bioprinting technique represent a possible alternative to animal models, enabling in vitro studies relevant to in vivo conditions. The innovative approach of 3D bioprinting allows a spatially controlled deposition of cells and biomaterial in a layer-by-layer fashion providing a platform for engineering reproducible models. However, despite the promising and revolutionizing character of 3D bioprinting technology, standardized protocols providing detailed instructions are lacking. Here, we provide a protocol for the automatized printing of simple alveolar, bronchial, and intestine epithelial cell layers as the basis for more complex respiratory and gastrointestinal tissue models. Such systems will be useful for high-throughput toxicity screening and drug efficacy evaluation.
Asunto(s)
Materiales Biocompatibles , Bioimpresión/métodos , Células Epiteliales , Impresión Tridimensional , Ingeniería de Tejidos/métodos , Células A549 , Células Epiteliales Alveolares , Automatización , Bronquios/citología , Células CACO-2 , Evaluación Preclínica de Medicamentos , Impedancia Eléctrica , Diseño de Equipo , Tracto Gastrointestinal/citología , Humanos , Técnicas In Vitro , Mucosa Intestinal/citología , L-Lactato Deshidrogenasa/análisis , Microscopía Confocal , Microscopía Fluorescente , Pruebas de ToxicidadRESUMEN
Expansion in production and commercial use of nanomaterials increases the potential human exposure during the lifecycle of these materials (production, use, and disposal). Inhalation is a primary route of exposure to nanomaterials; therefore it is critical to assess their potential respiratory hazard. Herein, we developed a three-dimensional alveolar model (EpiAlveolar) consisting of human primary alveolar epithelial cells, fibroblasts, and endothelial cells, with or without macrophages for predicting long-term responses to aerosols. Following thorough characterization of the model, proinflammatory and profibrotic responses based on the adverse outcome pathway concept for lung fibrosis were assessed upon repeated subchronic exposures (up to 21 days) to two types of multiwalled carbon nanotubes (MWCNTs) and silica quartz particles. We simulate occupational exposure doses for the MWCNTs (1-30 µg/cm2) using an air-liquid interface exposure device (VITROCELL Cloud) with repeated exposures over 3 weeks. Specific key events leading to lung fibrosis, such as barrier integrity and release of proinflammatory and profibrotic markers, show the responsiveness of the model. Nanocyl induced, in general, a less pronounced reaction than Mitsui-7, and the cultures with human monocyte-derived macrophages (MDMs) showed the proinflammatory response at later time points than those without MDMs. In conclusion, we present a robust alveolar model to predict inflammatory and fibrotic responses upon exposure to MWCNTs.
RESUMEN
Aim: Design nanostructured lipid carriers (NLC) to facilitate drug delivery to tuberculosis-infected areas, exploiting macrophage mannose receptors and assess their uptake in a 3D human lung model. Materials & methods: NLCs and mannosylated-NLCs were synthetized and characterized. Their uptake and biocompatibility were tested in a 3D human lung model. Results: The formulations have appropriate size (170-202 nm) and morphology for lung deposition. Cell membrane integrity was maintained and no significant pro-inflammatory cytokine (IL-1ß, IL-8 and TNF-α) secretion or morphological changes were observed 24 h post nanoparticles exposure. NLCs and mannosylated NLCs were distributed in the apical side of the lung tissue, both in macrophages and in epithelial cells. Conclusion: NLCs are biocompatible carriers and can be used for pulmonary drug delivery.
Asunto(s)
Sistemas de Liberación de Medicamentos , Pulmón/efectos de los fármacos , Nanoestructuras/química , Tuberculosis/tratamiento farmacológico , Membrana Celular/efectos de los fármacos , Humanos , Interleucina-1beta/genética , Interleucina-8/genética , Lectinas Tipo C/genética , Lípidos/química , Lípidos/uso terapéutico , Pulmón/patología , Macrófagos/efectos de los fármacos , Receptor de Manosa , Lectinas de Unión a Manosa/genética , Nanoestructuras/uso terapéutico , Receptores de Superficie Celular/genética , Tuberculosis/genética , Factor de Necrosis Tumoral alfa/genéticaRESUMEN
The overt hazard of carbon nanotubes (CNTs) is often assessed using in vitro methods, but determining a dose-response relationship is still a challenge due to the analytical difficulty of quantifying the dose delivered to cells. An approach to accurately quantify CNT doses for submerged in vitro adherent cell culture systems using UV-VIS-near-infrared (NIR) spectroscopy is provided here. Two types of multi-walled CNTs (MWCNTs), Mitsui-7 and Nanocyl, which are dispersed in protein rich cell culture media, are studied as tested materials. Post 48 h of CNT incubation, the cellular fractions are subjected to microwave-assisted acid digestion/oxidation treatment, which eliminates biological matrix interference and improves CNT colloidal stability. The retrieved oxidized CNTs are analyzed and quantified using UV-VIS-NIR spectroscopy. In vitro imaging and quantification data in the presence of human lung epithelial cells (A549) confirm that up to 85% of Mitsui-7 and 48% for Nanocyl sediment interact (either through internalization or adherence) with cells during the 48 h of incubation. This finding is further confirmed using a sedimentation approach to estimate the delivered dose by measuring the depletion profile of the CNTs.
RESUMEN
The long-term fate of biomedically relevant nanoparticles (NPs) at the single cell level after uptake is not fully understood yet. We report that lysosomal exocytosis of NPs is not a mechanism to reduce the particle load. Biopersistent NPs such as nonporous silica and gold remain in cells for a prolonged time. The only reduction of the intracellular NP number is observed via cell division, e.g., mitosis. Additionally, NP distribution after cell division is observed to be asymmetrical, likely due to the inhomogeneous location and distribution of the NP-loaded intracellular vesicles in the mother cells. These findings are important for biomedical and hazard studies as the NP load per cell can vary significantly. Furthermore, we highlight the possibility of biopersistent NP accumulation over time within the mononuclear phagocyte system.