Polymeric and biological membranes for organ-on-a-chip devices.

Membranes are fundamental elements within organ-on-a-chip (OOC) platforms, as they provide adherent cells with support, allow nutrients (and other relevant molecules) to permeate/exchange through membrane pores, and enable the delivery of mechanical or chemical stimuli. Through OOC platforms, physiological processes can be studied in vitro, whereas OOC membranes broaden knowledge of how mechanical and chemical cues affect cells and organs. OOCs with membranes are in vitro microfluidic models that are used to replace animal testing for various applications, such as drug discovery and disease modeling. In this review, the relevance of OOCs with membranes is discussed as well as their scaffold and actuation roles, properties (physical and material), and fabrication methods in different organ models. The purpose was to aid readers with membrane selection for the development of OOCs with specific applications in the fields of mechanistic, pathological, and drug testing studies. Mechanical stimulation from liquid flow and cyclic strain, as well as their effects on the cell's increased physiological relevance (IPR), are described in the first section. The review also contains methods to fabricate synthetic and ECM (extracellular matrix) protein membranes, their characteristics (e.g., thickness and porosity, which can be adjusted depending on the application, as shown in the graphical abstract), and the biological materials used for their coatings. The discussion section joins and describes the roles of membranes for different research purposes and their advantages and challenges.

Nutritional assessment of nixtamalized maize tortillas produced from dry masa flour, landraces, and high yield hybrids and varieties.

In the scientific literature there are different analyses of the nutritional profiles of maize tortillas, whether they are landraces or hybrid maize versus those made with dry masa flour (DMF). In general terms, there is agreement in the reported content of moisture. However, for the other nutrients, a great disparity is reported for each type of tortilla which may be due to various factors such as the type of maize or processing methods. In this study, the nutritional aspects of maize tortillas made with different genotypes (five hybrids, two varieties, five landraces, six hybrid mixtures and six dry masa flours) under controlled conditions, were compared. More than 30 characteristics were analyzed. High performance hybrids and varieties (HPHV) and landraces had the highest (p < 0.05) antioxidant capacity (58.8% free, 150.2% bound). In terms of vitamins contents, the tortillas produced from DMF contained 11.2 and 3.5 times more B1, 18.6 and 7.8 times more B2, and 2.7 and 5.3 times more B3 than HPHV and landraces respectively; and only in these samples was detected folic acid. DMF tortilla samples contained 1.75 times more sodium and 2.75 times more iron than the other groups, and 0.75 times less calcium than HPHV. Zinc was present in higher concentration (p < 0.05) in DMF tortilla samples. The landraces had the highest protein content (average 10.28%), but the tortillas produced from DMF presented the highest protein quality evaluated by protein digestibility-corrected amino acid score (PDCAAS) (p < 0.05) that represents 27, 25 and 19% more than hybrids mixture, HPHV and landraces, respectively. This work gives valuable information on how different types of grains differ in the nutritional quality affecting the final product to provide more elements in the decision-making of processors. There is no a perfect maize, but there are genotypes that can be combined as mixtures and the processing method to design superior nutritional tortillas and related products for populations that highly consume them and improve their human health.

Effect of thermal, nonthermal, and combined treatments on functional and nutritional properties of chickpeas.

Cicer arietinum or chickpea is an important and highly nutritious pulse, a source of complex carbohydrates, proteins, vitamins, and minerals, considered non-allergenic, and non-GMO crop. Processing technologies play an important role in modifying some chickpea properties and thus increasing its nutritional and health benefits. Herein is summarized and compared the available data on nutritional and functional aspects caused by thermal, nonthermal, and combinations of treatments for chickpea processing. The study focuses on describing the processing conditions necessary to change chickpea matrices aiming to enhance compound bioavailability, reduce anti-nutritional factors and modify functional characteristics for industrial application in product development. Thermal and nonthermal treatments can modify nutrient composition and bioavailability in chickpea matrices. Thermal treatments, moist or dry, prevent microbial spoilage, increase product palatability and increase protein quality. Nonthermal treatments aim to shorten the processing time and use less energy and water sources. Compared to thermal treatments, they usually preserve organoleptic attributes and bioactive compounds in chickpea matrices. Some treatment combinations can increase the efficacy of single treatments. Combined treatments increase antioxidant concentration, protein digestibility and available starch contents. Finally, despite differences among their effects, single and combined treatments can improve the nutritional and physicochemical properties of chickpea matrices.

Physicochemical and In Vitro Starch Residual Digestion Structures of Extruded Maize and Sorghum Starches Added with Sodium Stearoyl Lactylate.

This research aimed to characterize the physicochemical, in vitro digestion, and structural features of digestion residues of maize and sorghum starches subjected to thermoplastic extrusion, along with the influence of Sodium Stearoyl Lactylate (SSL), to obtain improved starches for food applications and to understand their behavior when consumed as a food ingredient. The morphology of the extruded materials showed remanent starch granules when SSL was used. A higher amount of medium and large linear glucan chains were found in these particles, influencing higher thermal stability (ΔH ≈ 4 J/g) and a residual crystallinity arrangement varying from 7 to 17% in the extrudates. Such structural features were correlated with their digestibility, where slowly digestible starch (SDS) and resistant starch (RS) fractions ranged widely (from 18.28 to 27.88% and from 0.13 to 21.41%, respectively). By analyzing the data with a Principal component analysis (PCA), we found strong influences of B2 and B3 type chains on the thermal stability of the extrudates. The amylose and smaller glucan chains (A and B1) also significantly affected the emulsifying and foam stability properties. This research contributes to the molecular knowledge of starch in extruded products with broad food applications.

Extrusion as a tool to enhance the nutritional and bioactive potential of cereal and legume by-products.

Cereal and legume by-products obtained from primary food production industries pose an environmental and economic problem. Nevertheless, these residues can potentially yield value-added products due to their elevated content of dietary fiber, phytochemicals, vitamins, minerals, and residual levels of proteins, which makes them a suitable and heightened option for reutilization in human consumption. Several studies identify extrusion as an innovative technology to modify the technofunctionality and nutritional properties of cereal and legume by-products, resulting in the production of improved ingredients. This review focuses on studies that evaluate the effect of extrusion to improve the nutritional and bioactive potential of cereal and legume by-products. A revision of the extrusion process parameters that improve the profile and bioavailability of dietary fiber, proteins, and phenolic compounds, and minimize antinutritional factors associated to cereal and legume by-products was done. The composition of by-products and process parameters such as feed moisture, barrel temperature and screw speed influence the resulting effect of extrusion. Studies suggest that extruding composite feedstock containing cereal or legume by-products may limit the molecular modifications that trigger the nutritional improvements. Therefore, extrusion applied as a pretreatment represents an interesting and economic alternative to improve the profile and bioavailability of the nutrients found in cereal and legume by-products which might lead to the development of functional ingredients useful to produce foods aimed to prevent chronic diseases.

Quality assessment of maize tortillas produced from landraces and high yield hybrids and varieties.

Introduction: Different analyses of the profiles of tortillas have been made using the traditional method, whether from landraces or hybrids versus those made with dry masa flour in which significant variability (p < 0.05) is reported in favor or against each type of tortilla which may be due to various factors such as the type of maize or the processing methods. Methods: Twenty-two samples including hybrids, hybrid mixtures, varieties, landraces and dry masa flours were processed to masa and tortilla under similar and controlled conditions and tortilla quality evaluated. In total, 70 characteristics were analyzed as physicochemical properties of the maize (e.g., hectoliter weight and dimensions), processability characteristics, masa characteristics [e.g. viscoamylographic parameters (RVA)], and quality parameters of tortillas (e.g., sensory performance, color and texture). Results and discussión: The studied materials presented variability among genotypes, especially within landraces. The physical and chemical properties of corn affected the processability and quality characteristics of tortillas (sensory and composition), and it was found that high producing hybrids and varieties (p < 0.05) were better and more consistent in all stages of processing. Forty percent of the landraces yielded masa with poor machinability. Conclusion: Landraces averaged 1.27 percentage points more protein (p < 0.05) than other analyzed samples and they comparatively yielded tortillas with lower extensibility (12.34%) compared to counterparts produced from hybrids and varieties. This work provides valuable information on how the chemical and physical characteristics of different types of maize genotypes affect the nixtamalization process and the quality of tortillas to provide more elements in the selection of the most appropriate genotypes for tortilla production.

Metabolism and Anticancer Mechanisms of Selocompounds: Comprehensive Review.

Selenium (Se) is an essential micronutrient with several functions in cellular and molecular anticancer processes. There is evidence that Se depending on its chemical form and the dosage use could act as a modulator in some anticancer mechanisms. However, the metabolism of organic and inorganic forms of dietary selenium converges on the main pathways. Different selenocompounds have been reported to have crucial roles as chemopreventive agents, such as antioxidant activity, activation of apoptotic pathways, selective cytotoxicity, antiangiogenic effect, and cell cycle modulation. Nowadays, great interest has arisen to find therapies that could enhance the antitumor effects of different Se sources. Herein, different studies are reported related to the effects of combinatorial therapies, where Se is used in combination with proteins, polysaccharides, chemotherapeutic agents or as nanoparticles. Another important factor is the presence of single nucleotide polymorphisms in genes related to Se metabolism or selenoprotein synthesis which could prevent cancer. These studies and mechanisms show promising results in cancer therapies. This review aims to compile studies that have demonstrated the anticancer effects of Se at molecular levels and its potential to be used as chemopreventive and in cancer treatment.

Assessment of Potential Probiotic and Synbiotic Properties of Lactic Acid Bacteria Grown In Vitro with Starch-Based Soluble Corn Fiber or Inulin.

This research is aimed to search for suitable probiotic plus prebiotic combinations for food applications. Sixteen bacteria were tested for resistance to low pH, bile salts and antibiotics, and their adhesion to Caco-2 cells, in order to select potential probiotics. Then, two bacteria were selected to study short chain fatty acids production in a starch-based soluble corn fiber or inulin media. Lactiplantibacillus plantarum V3 and L. acidophilus La3 manifested the best probiotic features with a remarkable adhesion ability (23.9% and 17.3%, respectively). Structural differences between fibers have an impact on how each one is metabolized, both in their capacity of being easily fermented and in the short chain fatty acids profile obtained: L. acidophilus La3 in inulin fermentation yielded the highest total short chain fatty acids (85.7 mMol/L), and, in starch-based soluble corn fiber fermentation, yielded the highest butyric acid content (0.31 mMol/L). This study provides valuable information for future design of synbiotics for food applications.

Effects of the substitution of wheat flour with raw or germinated ayocote bean (Phaseolus coccineus) flour on the nutritional properties and quality of bread.

This study aimed to evaluate the potential of 10%, 20%, and 30% of raw (ARF) and germinated (AGF) ayocote bean flour as a partial substitute for wheat flour in breadmaking. Substitution with both ayocote bean flours modified the water absorption and development time while maintaining the dough stability. Supplemented breads had 13%, 51%, and 132% higher protein, mineral, and crude fiber content, respectively, than control bread (100% wheat). The breadmaking features, color and crumb firmness, were affected by the substitution level. Sensory analysis revealed that germination could improve the taste and smell of breads produced with ayocote bean flour. The sensory attribute scores of 10% AGF bread were comparable to those of the control bread. Supplementation reduced the in vitro protein digestibility, although the effect was less pronounced in 10% ARF and 20% AGF breads. The limiting amino acid score of supplemented breads increased up to 70%, which improved their protein digestibility-corrected amino acid scores. Supplementation with 20% or 30% of both ARF and AGF increased resistant starch values and decreased the total digestible starch of breads. Thus, the results showed that substituting wheat with ARF or AGF improves the nutritional properties of bread. However, low substitution levels should be selected to avoid a considerable decrease in physical and sensory properties. PRACTICAL APPLICATION: Substituting wheat flour with ayocote bean flour improved the nutritional value of bread. Germination of ayocote beans decreased the cooking stability of composite dough. Bread fortified with ayocote flour had high levels of essential amino acids. Bread with raw or germinated ayocote flours had high limiting amino acid scores. Composite bread had high resistant starch and low total digestible starch.

Comparison of Regular and Selenium-Enriched Tortillas Produced from Sprouted Corn Kernels.

Corn kernels were soaked with different selenium (Se) solutions (0, 12 or 24 mg Na2SeO3/L), sprouted for different times and then lime-cooked for the pilot plant production of tortillas. The dough and tortillas were quantified in terms of total Se, starch and protein content. Also, in vitro digestibility, texture, color, and sensory properties were evaluated. Results indicated that lime-cooking times were significantly reduced from 39.15 to 14.34, 8.42 and 2.80 min when whole corn was compared with kernels germinated for 1, 2 or 3 days. The Se content of regular tortillas (0.08 µg/g dw) increased about eight-fold in tortillas (0.651-0.625 µg/g dw) produced of corn germinated for two day and treated with 24 mg of Na2SeO3/L. The highest α-amylase activity and lower starch viscosity values were observed in 3-day germinated supplemented with the highest Se. Se-enriched tortillas produced from 2-day sprouted kernels treated with 12 mg Na2SeO3 showed the highest levels of general acceptability, texture and flavor.

Protein quality and glycemic indexes of mango drinks fortified with a soybean/maize protein isolate with three levels of urease activity fed to weanling rats.

Introduction: Public health professionals established a direct link between obesity and the rise in high caloric beverage intake. Current recommendations promote the elimination of sweet fruit drinks from the population's diet. One way of evading this is by modifying the drink's nutritional characteristics regarding nutrient uptake and utilization. Objectives: evaluate the protein quality of a soy/maize protein (SMP) and its physiological effects on nutrient intake and to assess glycemic indexes (GIs) of mango based drinks prepared with sucrose or stevia. Materials and methods: Mango drinks were supplemented with different sources of protein (three SMP thermally treated to contain different urease activities (UA) or whey protein concentrate (WPC)) that were sweetened with sucrose or stevia/sucralose. The protein digestibility, net protein absorption (NPA), biological value (BV), net protein utilization (NPU) value and protein efficiency ratio (PER) were assessed with weanling rats. Moreover, the GIs of the mango drinks were measured in the same animal model. Results: PER and NPA evaluated in a rat model showed that increased levels of UA decreased Biological (BV) and Net Protein Utilization (NPU) values. The GIs of the mango drinks significantly diminished with the addition of 3.5% of SMP, but unexpectedly the substitution of sucrose by stevia/sucralose did not significantly change the glycemic response. Conclusion: the SMP isolate can be used to improve the nutritional profile and lower GIs of mango drinks.

Underutilized Mexican Plants: Screening of Antioxidant and Antiproliferative Properties of Mexican Cactus Fruit Juices.

Cacti fruits are known to possess antioxidant and antiproliferative activities among other health benefits. The following paper evaluated the antioxidant capacity and bioactivity of five clarified juices from different cacti fruits (Stenocereus spp., Opuntia spp. and M. geomettizans) on four cancer cell lines as well as one normal cell line. Their antioxidant compositions were measured by three different protocols. Their phenolic compositions were quantified through high performance liquid chromatography and the percentages of cell proliferation of fibroblasts as well as breast, prostate, colorectal, and liver cancer cell lines were evaluated though in vitro assays. The results were further processed by principal component analysis. The clarified juice from M. geomettizans fruit showed the highest concentration of total phenolic compounds and induced cell death in liver and colorectal cancer cells lines as well as fibroblasts. The clarified juice extracted from yellow Opuntia ficus-indica fruit displayed antioxidant activity as well as a selective cytotoxic effect on a liver cancer cell line with no toxic effect on fibroblasts. In conclusion, the work supplies evidence on the antioxidant and antiproliferative activities that cacti juices possess, presenting potential as cancer cell proliferation preventing agents.

Methods for the Modification and Evaluation of Cereal Proteins for the Substitution of Wheat Gluten in Dough Systems.

The substitution of wheat gluten in the food industry is a relevant research area because the only known treatment for celiac disease is abstinence from this protein complex. The use of gluten-free cereals in dough systems has demonstrated that the viscoelastic properties of gluten cannot be achieved without the modification of the protein fraction. The quality of the final product is determined by the ability of the modification to form a matrix similar to that of gluten and to reach this, different methods have been proposed and tested. These procedures can be classified into four main types: chemical, enzymatic, physical, and genetic. This article provides a comprehensive review of the most recent research done in protein modification of cereal and pseudocereals for gluten substitution. The reported effects and methodologies for studying the changes made with each type of modification are described; also, some opportunity areas for future works regarding the study of the effect of protein modifications on gluten-free products are presented.

In Silico Analysis and In Vitro Characterization of the Bioactive Profile of Three Novel Peptides Identified from 19 kDa α-Zein Sequences of Maize.

In this study, we characterized three novel peptides derived from the 19 kDa α-zein, and determined their bioactive profile in vitro and developed a structural model in silico. The peptides, 19ZP1, 19ZP2 and 19ZP3, formed α-helical structures and had positive and negative electrostatic potential surfaces (range of -1 to +1). According to the in silico algorithms, the peptides displayed low probabilities for cytotoxicity (≤0.05%), cell penetration (10-33%) and antioxidant activities (9-12.5%). Instead, they displayed a 40% probability for angiotensin-converting enzyme (ACE) inhibitory activity. For in vitro characterization, peptides were synthesized by solid phase synthesis and tested accordingly. We assumed α-helical structures for 19ZP1 and 19ZP2 under hydrophobic conditions. The peptides displayed antioxidant activity and ACE-inhibitory activity, with 19ZP1 being the most active. Our results highlight that the 19 kDa α-zein sequences could be explored as a source of bioactive peptides, and indicate that in silico approaches are useful to predict peptide bioactivities, but more structural analysis is necessary to obtain more accurate data.

Environmentally Friendly Methods for Flavonoid Extraction from Plant Material: Impact of Their Operating Conditions on Yield and Antioxidant Properties.

The flavonoids are compounds synthesized by plants, and they have properties such as antioxidant, anticancer, anti-inflammatory, and antibacterial, among others. One of the most important bioactive properties of flavonoids is their antioxidant effect. Synthetic antioxidants have side toxic effects whilst natural antioxidants, such as flavonoids from natural sources, have relatively low toxicity. Therefore, it is important to incorporate flavonoids derived from natural sources in several products such as foods, cosmetics, and drugs. For this reason, there is currently a need to extract flavonoids from plant resources. In this review are described the most important parameters involved in the extraction of flavonoids by unconventional methods such as ultrasound, pressurized liquid extraction, mechanochemical, high hydrostatic pressure, supercritical fluid, negative pressure cavitation, intensification of vaporization by decompression to the vacuum, microwave, infrared, pulsed electric field, high-voltage electrical discharges, and enzyme-assisted extraction. There are no unified operation conditions to achieve high yields and purity. Notwithstanding, progress has been achieved in the development of more advanced and environmentally friendly methods of extraction. Although in literature are found important advances, a complete understanding of the extraction process in each of the unconventional techniques is needed to determine the thermodynamic and kinetic mechanisms that govern each of the techniques.

Legumes Protease Inhibitors as Biopesticides and Their Defense Mechanisms against Biotic Factors.

Legumes are affected by biotic factors such as insects, molds, bacteria, and viruses. These plants can produce many different molecules in response to the attack of phytopathogens. Protease inhibitors (PIs) are proteins produced by legumes that inhibit the protease activity of phytopathogens. PIs are known to reduce nutrient availability, which diminishes pathogen growth and can lead to the death of the pathogen. PIs are classified according to the specificity of the mechanistic activity of the proteolytic enzymes, with serine and cysteine protease inhibitors being studied the most. Previous investigations have reported the efficacy of these highly stable proteins against diverse biotic factors and the concomitant protective effects in crops, representing a possible replacement of toxic agrochemicals that harm the environment.

Synergistic Combinations of Curcumin, Sulforaphane, and Dihydrocaffeic Acid against Human Colon Cancer Cells.

Nutraceutical combinations that act synergistically could be a powerful solution against colon cancer, which is the second deadliest malignancy worldwide. In this study, curcumin (C), sulforaphane (S), and dihydrocaffeic acid (D, a chlorogenic acid metabolite) were evaluated, individually and in different combinations, over the viability of HT-29 and Caco-2 colon cancer cells, and compared against healthy fetal human colon (FHC) cells. The cytotoxic concentrations to kill 50%, 75%, and 90% of the cells (CC50, CC75, and CC90) were obtained, using the MTS assay. Synergistic, additive, and antagonistic effects were determined by using the combination index (CI) method. The 1:1 combination of S and D exerted synergistic effects against HT-29 at 90% cytotoxicity level (doses 90:90 µM), whereas CD(1:4) was synergistic at all cytotoxicity levels (9:36-34:136 µM) and CD(9:2) at 90% (108:24 µM) against Caco-2 cells. SD(1:1) was significantly more cytotoxic for cancer cells than healthy cells, while CD(1:4) and CD(9:2) were similarly or more cytotoxic for healthy cells. Therefore, the SD(1:1) combination was chosen as the best. A model explaining SD(1:1) synergy is proposed. SD(1:1) can be used as a basis to develop advanced food products for the prevention/co-treatment of colon cancer.

Effect of Ultrasound Application on Protein Yield and Fate of Alkaloids during Lupin Alkaline Extraction Process.

The objective of this work is to elucidate the fate of quinolizidine alkaloids (QA) during the lupin protein extraction process assisted with ultrasound and the evaluation of the nutritional and functional properties of the protein fraction. Proximal characterization, concentration of anti-nutritional compounds, amino acid profile and protein solubility profile of flours from three lupin species were (L. albus, L. angustifolius and L. mutabilis) assessed. The result showed a significant difference (p < 0.05) in protein concentration, fat, total alkaloids and particle size between the three species flours. Based on these parameters, the most different Lupinus species (L. mutabilis and L. angustifolius) were chosen to study the behavior of the protein fraction in terms of functionality, composition and resistance to thermal treatments. The results obtained for L. mutabilis described the ultrasound effect as beneficial for protein yield (14% more than control), QA reduction from bagasse (81% less than control) and protein isolate production (50% less than control). On the other hand, L. angustifolius was more resistant to the ultrasound effect with no significant difference between treatments (10 and 15 min) and control but with the lower toxicity and better amino acid score. These results will be useful to design processes to assist in the objective of meeting the future protein demand of the population.

Effects of Post Anthesis Foliar Application of Sodium Selenite to Soybeans (Glycine max): Lipid Composition and Oil Stability.

This study aimed at determining whether applying selenium to soybean plants affected composition and oil oxidative stability of the seeds. Soybean was cultivated and sodium selenite (Selenite) added by foliar application (0, 200, or 300 g Selenite/Ha). Physical and chemical characterization was performed on the harvested seeds (thousand seed weight, bulk and true densities, fat, fiber, ash, protein, nitrogen free extract and selenium content). Soybean oil was tested in terms of Oxidation Induction Time (OIT), fatty acid, tocopherols, phytosterols, density, refractive index and saponification and iodine values. All seeds showed similar composition: crude fat (around 20%) and crude fiber (from 8.4 to 9.3%). Control seeds and those treated with 200 g Selenite/Ha contained higher protein concentration (37%), compared to the 300 g treatment (35.9%). All seeds showed similar ash content (7%). OIT values for both treatments were slightly lower (from 39.1 to 43.7 min) compared with 45.02 min in the control. Polyunsaturated fatty acids were higher for the 300 g Se/Ha (50.2%) compared with 48.2 to 49.4%of the other treatments. All samples showed similar phytosterols and tocopherols concentrations. Results showed that OIT values maintained an inverse relationship with selenium content, suggesting that foliar fertilization enhanced oil oxidation or acted as a pro-oxidant at the applied rates.

Whole unripe plantain (Musa paradisiaca L.) as raw material for bioethanol production.

BACKGROUND: The use of byproducts such as rejected plantain with final disposition problems and conversion processes with 'green' technologies are important research topics. Bioethanol production from crops with a high content of fermentable sugars is an alternative to that from traditional crops (corn and sugar cane). The aim of this work was to study the use of whole (peel and pulp) unripe plantain (WP) for bioethanol production. RESULTS: Lab-scale liquefaction and saccharification of both materials released mainly three carbohydrates, glucose (9.02 mg g-1 ), maltose (0.45 mg g-1 ) and xylose (0.25 mg g-1 ). The WP saccharification required the use of pectinase and cellulase because of the high amounts of pectin and cellulose associated with the peel. Fermentation for 11 h produced similar ethanol concentration for both samples, but at the end of fermentation (32 h), the ethanol production was higher in the WP (58.6 mL L-1 ) compared with the plantain pulp (PP) (45.5 mL L-1 ). The theoretical ethanol yield was lower with WP (67%) than with PP (90%). CONCLUSION: WP can be an alternative raw material for bioethanol production. © 2019 Society of Chemical Industry.