Chiral Porphyrin Assemblies Investigated by a Modified Reflectance Anisotropy Spectroscopy Spectrometer.

Reflectance anisotropy spectroscopy (RAS) has been largely used to investigate organic compounds: Langmuir-Blodgett and Langmuir-Schaeffer layers, the organic molecular beam epitaxy growth in situ and in real time, thin and ultrathin organic films exposed to volatiles, in ultra-high vacuum (UHV), in controlled atmosphere and even in liquid. In all these cases, porphyrins and porphyrin-related compounds have often been used, taking advantage of the peculiar characteristics of RAS with respect to other techniques. The technical modification of a RAS spectrometer (CD-RAS: circular dichroism RAS) allows us to investigate the circular dichroism of samples instead of the normally studied linear dichroism: CD-RAS measures (in transmission mode) the anisotropy of the optical properties of a sample under right and left circularly polarized light. Although commercial spectrometers exist to measure the circular dichroism of substances, the "open structure" of this new spectrometer and its higher flexibility in design makes it possible to couple it with UHV systems or other experimental configurations. The importance of chirality in the development of organic materials (from solutions to the solid state, as thin layers deposited-in liquid or in vacuum-on transparent substrates) could open interesting possibilities to a development in the investigation of the chirality of organic and biological layers. In this manuscript, after the detailed explanation of the CD-RAS technique, some calibration tests with chiral porphyrin assemblies in solution or deposited in solid film are reported to demonstrate the quality of the results, comparing curves obtained with CD-RAS and a commercial spectrometer.

Emerging oxidized and defective phases in low-dimensional CrCl3.

Two-dimensional (2D) magnets such as chromium trihalides CrX3 (X = I, Br, Cl) represent a frontier for spintronics applications and, in particular, CrCl3 has attracted research interest due its relative stability under ambient conditions without rapid degradation, as opposed to CrI3. Herein, mechanically exfoliated CrCl3 flakes are characterized at the atomic scale and the electronic structures of pristine, oxidized, and defective monolayer CrCl3 phases are investigated employing density functional theory (DFT) calculations, scanning tunneling spectroscopy (STS), core level X-ray photoemission spectroscopy (XPS), and valence band XPS and ultraviolet photoemission spectroscopy (UPS). As revealed by atomically resolved transmission electron microscopy (TEM) and energy dispersive X-ray (EDX) analysis, the CrCl3 flakes show spontaneous surface oxidation upon air exposure with an extrinsic long-range ordered oxidized O-CrCl3 structure and amorphous chromium oxide formation on the edges of the flakes. XPS proves that CrCl3 is thermally stable up to 200 °C having intrinsically Cl vacancy-defects whose concentration is tunable via thermal annealing up to 400 °C. DFT calculations, supported by experimental valence band analysis, indicate that pure monolayer (ML) CrCl3 is an insulator with a band gap of 2.6 eV, while the electronic structures of oxidized and Cl defective phases of ML CrCl3, extrinsically emerging in exfoliated CrCl3 flakes, show in-gap spin-polarized states and relevant modifications of the electronic band structures.

Corroles at the Real Solid-Liquid Interface: In Situ STM Investigation of a Water-Soluble Corrole Layer Deposited onto Au(111).

Corrole derivatives have been recently employed in many applications at the solid-liquid interface. Therefore, the structural arrangement of the molecular layers in direct contact with the liquid is of fundamental interest. We investigated in solution the deposition of molecular layers of the previously prepared water-soluble phosphorus complex of a 2-sulfonato-10-(4-sulfonatophenyl)-5,15-dimesitylcorrole [see synthesis in our previous paper, M. Naitana et al., Chem. Eur. J. 2017, 23, 905-916]. The layer formation of P corroles onto the Au(111) surface was monitored by STM in situ, that is, with the substrate immersed in the solution. Marked differences in the morphology between the organic layer formed on the substrate and that deposited after solvent evaporation (drop casting) are reported. In particular, the coating of gold was more effective and stable in the presence of liquid. Preservation of functionality of the corrole molecules after adsorption was verified. This result validates the relevance of corrole layers at the solid-liquid interface to exploit the peculiar properties of these molecules in real-world applications.

A Highly Emissive Water-Soluble Phosphorus Corrole.

The synthesis, spectroscopic, and optical properties of the water-soluble phosphorus complex of a 2-sulfonato-10-(4-sulfonatophenyl)-5,15-dimesitylcorrole have been investigated. The compound was prepared by adopting a novel strategy for the corrole sulfonation, leading to the regioselective isomer in an almost quantitative yield. The phosphorus coordination has a key role in determining the corrole substitution pattern, limiting the formation of poly-substituted species, which affected the reaction of the corrole free base. The resulting complex shows excellent optical properties in terms of emission quantum yield, also in polar protic solvents, including water. 31 P NMR spectroscopy in CD3 OD indicates that the P sulfonate complex has been isolated in a hexacoordinated geometry with two different ligands (L1=-OH, L2=-OCH3 ), and it is prone to axial ligand exchange with methanol, with no evidence of intermediate pentacoordinated species. The morphological characterization of thin layers of the P corrole deposited onto an Au(111) surface showed that the addition of an intermediate layer of reduced graphene oxide allows for a better control of corrole aggregation, inducing also transformation of the Au(111) reconstructed surface.

van der Waals Heteroepitaxy of Germanene Islands on Graphite.

We fabricated flat, two-dimensional germanium sheets showing a honeycomb lattice that matches that of germanene by depositing submonolayers of Ge on graphite at room temperature and subsequent annealing to 350 °C. Scanning tunneling microscopy shows that the germanene islands have a small buckling with no atomic reconstruction and does not give any hints for alloy formation and hybridization with the substrate. Our density functional theory calculations of the structural properties agree well with our experimental findings and indicate that the germanene sheet interacts only weakly with the substrate underneath. Our band structure calculations confirm that the Dirac cone of free-standing germanene is preserved for layers supported on graphite. The germanene islands show a small but characteristic charge transfer with the graphite substrate which is predicted by our ab initio simulations in excellent agreement with scanning tunneling spectroscopy measurements.

Beneficial defects: exploiting the intrinsic polishing-induced wafer roughness for the catalyst-free growth of Ge in-plane nanowires.

We outline a metal-free fabrication route of in-plane Ge nanowires on Ge(001) substrates. By positively exploiting the polishing-induced defects of standard-quality commercial Ge(001) wafers, micrometer-length wires are grown by physical vapor deposition in ultra-high-vacuum environment. The shape of the wires can be tailored by the epitaxial strain induced by subsequent Si deposition, determining a progressive transformation of the wires in SiGe faceted quantum dots. This shape transition is described by finite element simulations of continuous elasticity and gives hints on the equilibrium shape of nanocrystals in the presence of tensile epitaxial strain. PACS: 81.07.Gf; 68.35.bg; 68.35.bj; 62.23.Eg.