Bone Quality as Measured by Hounsfield Units More Accurately Predicts Proximal Junctional Kyphosis than Vertebral Bone Quality Following Long-Segment Thoracolumbar Fusion.

OBJECTIVE: To compare the prognostic power of Hounsfield units (HU) and Vertebral Bone Quality (VBQ) score for predicting proximal junctional kyphosis (PJK) following long-segment thoracolumbar fusion to the upper thoracic spine (T1-T6). METHODS: Vertebral bone quality around the upper instrumented vertebrae (UIV) was measured using HU on preoperative CT and VBQ on preoperative MRI. Spinopelvic parameters were also categorized according to the Scoliosis Research Society-Schwab classification. Univariable analysis to identify predictors of the occurrence of PJK and survival analyses with Kaplan-Meier method and Cox regression were performed to identify predictors of time to PJK (defined as ≥10° change in Cobb angle of UIV+2 and UIV). Sensitivity analyses showed thresholds of HU < 164 and VBQ > 2.7 to be most predictive for PJK. RESULTS: Seventy-six patients (mean age 66.0 ± 7.0 years; 27.6% male) were identified, of whom 15 suffered PJK. Significant predictors of PJK were high postoperative pelvic tilt (P = 0.038), high postoperative T1-pelvic angle (P = 0.041), and high postoperative PI-LL mismatch (P = 0.028). On survival analyses, bone quality, as assessed by the average HU of the UIV and UIV+1 was the only significant predictor of time to PJK (odds ratio [OR] 3.053; 95% CI 1.032-9.032; P = 0.044). VBQ measured using the UIV, UIV+1, UIV+2, and UIV-1 vertebrae approached, but did not reach significance (OR 2.913; 95% CI 0.797-10.646; P = 0.106). CONCLUSIONS: In larger cohorts, VBQ may prove to be a significant predictor of PJK following long-segment thoracolumbar fusion. However, Hounsfield units on CT have greater predictive power, suggesting preoperative workup for long-segment thoracolumbar fusion benefits from computed tomography versus magnetic resonance imaging alone to identify those at increased risk of PJK.

Ventriculoperitoneal Shunt Placement Safety in Idiopathic Normal Pressure Hydrocephalus: Anticoagulated Versus Non-Anticoagulated Patients.

BACKGROUND: Many patients with idiopathic normal pressure hydrocephalus (iNPH) have medical comorbidities requiring anticoagulation that could negatively impact outcomes. This study evaluated the safety of ventriculoperitoneal shunt placement in iNPH patients on systemic anticoagulation versus those not on anticoagulation. METHODS: Patients >60 years of age with iNPH who underwent shunting between 2018 and 2022 were retrospectively reviewed. Baseline demographics, comorbidities (quantified by modified frailty index and Charlson comorbidity index), anticoagulant/antiplatelet agent use (other than aspirin), operative details, and complications were collected. Outcomes of interest were the occurrence of postoperative hemorrhage and overdrainage. RESULTS: A total of 234 patients were included in the study (mean age 75.22 ± 6.04 years; 66.7% male); 36 were on anticoagulation/antiplatelet therapy (excluding aspirin). This included 6 on Warfarin, 19 on direct Xa inhibitors, 10 on Clopidogrel, and 1 on both Clopidogrel and Warfarin. Notably, 70% of patients (164/234) used aspirin alone or combined with anticoagulation or clopidogrel. Baseline modified frailty index was similar between groups, but those on anticoagulant/antiplatelet therapy had a higher mean Charlson comorbidity index (2.67 ± 1.87 vs. 1.75 ± 1.84; P = 0.001). Patients on anticoagulants were more likely to experience tract hemorrhage (11.1 vs. 2.5%; P = 0.03), with no significant difference in the rates of intraventricular hemorrhage or overdrainage-related subdural fluid collection. CONCLUSIONS: Anticoagulant and antiplatelet agents are common in the iNPH population, and patients on these agents experienced higher rates of tract hemorrhage following ventriculoperitoneal shunt placement; however, overall hemorrhagic complication rates were similar.

Significant Reduction in Bone Density as Measured by Hounsfield Units in Patients with Ankylosing Spondylitis or Diffuse Idiopathic Skeletal Hyperostosis.

Background: Multisegmental pathologic autofusion occurs in patients with ankylosing spondylitis (AS) and diffuse idiopathic skeletal hyperostosis (DISH). It may lead to reduced vertebral bone density due to stress shielding. Methods: This study aimed to determine the effects of autofusion on bone density by measuring Hounsfield units (HU) in the mobile and immobile spinal segments of patients with AS and DISH treated at a tertiary care center. The mean HU was calculated for five distinct regions-cranial adjacent mobile segment, cranial fused segment, mid-construct fused segment, caudal fused segment, and caudal adjacent mobile segment. Means for each region were compared using paired-sample t-tests. Multivariable regression was used to determine independent predictors of mid-fused segment HUs. Results: One hundred patients were included (mean age 76 ± 11 years, 74% male). The mean HU for the mid-construct fused segment (100, 95% CI [86, 113]) was significantly lower than both cranial and caudal fused segments (174 and 108, respectively; both p < 0.001), and cranial and caudal adjacent mobile segments (195 and 115, respectively; both p < 0.001). Multivariable regression showed the mid-construct HUs were predicted by history of smoking (-30 HU, p = 0.009). Conclusions: HUs were significantly reduced in the middle of long-segment autofusion, which was consistent with stress shielding. Such shielding may contribute to the diminution of vertebral bone integrity in AS/DISH patients and potentially increased fracture risk.

Injectable bioactive poly(propylene fumarate) and polycaprolactone based click chemistry bone cement for spinal fusion in rabbits.

Degenerative spinal pathology is a widespread medical issue, and spine fusion surgeries are frequently performed. In this study, we fabricated an injectable bioactive click chemistry polymer cement for use in spinal fusion and bone regrowth. Taking advantages of the bioorthogonal click reaction, this cement can be crosslinked by itself eliminating the addition of a toxic initiator or catalyst, nor any external energy sources like UV light or heat. Furthermore, nano-hydroxyapatite (nHA) and microspheres carrying recombinant human bone morphogenetic protein-2 (rhBMP-2) and recombinant human vascular endothelial growth factor (rhVEGF) were used to make the cement bioactive for vascular induction and osteointegration. After implantation into a rabbit posterolateral spinal fusion (PLF) model, the cement showed excellent induction of new bone formation and bridging bone, achieving results comparable to autograft control. This is largely due to the osteogenic properties of nano-hydroxyapatite (nHA) and the released rhBMP-2 and rhVEGF growth factors. Since the availability of autograft sources is limited in clinical settings, this injectable bioactive click chemistry cement may be a promising alternative for spine fusion applications in addressing various spinal conditions.

Bioactive Moldable Click Chemistry Polymer Cement with Nano-Hydroxyapatite and Growth Factor-Enhanced Posterolateral Spinal Fusion in a Rabbit Model.

Spinal injuries or diseases necessitate effective fusion solutions, and common clinical approaches involve autografts, allografts, and various bone matrix products, each with limitations. To address these challenges, we developed an innovative moldable click chemistry polymer cement that can be shaped by hand and self-cross-linked in situ for spinal fusion. This self-cross-linking cement, enabled by the bioorthogonal click reaction, excludes the need for toxic initiators or external energy sources. The bioactivity of the cement was promoted by incorporating nanohydroxyapatite and microspheres loaded with recombinant human bone morphogenetic protein-2 and vascular endothelial growth factor, fostering vascular induction and osteointegration. The release kinetics of growth factors, mechanical properties of the cement, and the ability of the scaffold to support in vitro cell proliferation and differentiation were evaluated. In a rabbit posterolateral spinal fusion model, the moldable cement exhibited remarkable induction of bone regeneration and effective bridging of spine vertebral bodies. This bioactive moldable click polymer cement therefore presents a promising biomaterial for spinal fusion augmentation, offering advantages in safety, ease of application, and enhanced bone regrowth.

Biodegradable poly(caprolactone fumarate) 3D printed scaffolds for segmental bone defects within the Masquelet technique.

Segmental bone defects, often clinically treated with nondegradable poly(methylmethacrylate) (PMMA) in multistage surgeries, present a significant clinical challenge. Our study investigated the efficacy of 3D printed biodegradable polycaprolactone fumarate (PCLF)/PCL spacers in a one-stage surgical intervention for these defects, focusing on early bone regeneration influenced by spacer porosities. We compared nonporous PCLF/PCL and PMMA spacers, conventionally molded into cylinders, with porous PCLF/PCL spacers, 3D printed to structurally mimic segmental defects in rat femurs for a 4-week implantation study. Histological analysis, including tissue staining and immunohistochemistry with bone-specific antibodies, was conducted for histomorphometry evaluation. The PCLF/PCL spacers demonstrated compressive properties within 6 ± 0.5 MPa (strength) and 140 ± 15 MPa (modulus). Both porous PCLF/PCL and Nonporous PMMA formed collagen-rich membranes (PCLF/PCL: 92% ± 1.3%, PMMA: 86% ± 1.5%) similar to those induced in the Masquelet technique, indicating PCLF/PCL's potential for one-stage healing. Immunohistochemistry confirmed biomarkers for tissue regeneration, underscoring PCLF/PCL's regenerative capabilities. This research highlights PCLF/PCL scaffolds' ability to induce membrane formation in critical-sized segmental bone defects, supporting their use in one-stage surgery. Both solid and porous PCLF/PCL spacers showed adequate compressive properties, with the porous variants exhibiting BMP-2 expression and woven bone formation, akin to clinical standard PMMA. Notably, the early ossification of the membrane into the pores of porous scaffolds suggests potential for bone interlocking and regeneration, potentially eliminating the need for a second surgery required for PMMA spacers. The biocompatibility and biodegradability of PCLF/PCL make them promising alternatives for treating critical bone defects, especially in vulnerable patient groups.

Reduced Bone Density Based on Hounsfield Units After Long-Segment Spinal Fusion with Harrington Rods.

BACKGROUND: Long-segment instrumentation, such as Harrington rods, offloads vertebrae within the construct, which may result in significant stress shielding of the fused segments. The present study aimed to determine the effects of spinal fusion on bone density by measuring Hounsfield units (HUs) throughout the spine in patients with a history of Harrington rod fusion. METHODS: Patients with a history of Harrington rod fusion treated at a single academic institution were identified. Mean HUs were calculated at 5 spinal segments for each patient: cranial adjacent mobile segment, cranial fused segment, midconstruct fused segment, caudal fused segment, and caudal adjacent mobile segment. Mean HUs for each level were compared using a paired-sample t test, with statistical significance defined by P < 0.05. Hierarchic multiple regression, including age, gender, body mass index, and time since original fusion, was used to determine predictors of midfused segment HUs. RESULTS: One hundred patients were included (mean age, 55 ± 12 years; 62% female). Mean HUs for the midconstruct fused segment (110; 95% confidence interval [CI], 100-121) were significantly lower than both the cranial and caudal fused segments (150 and 118, respectively; both P < 0.05), as well as both the cranial and caudal adjacent mobile segments (210 and 130, respectively; both P < 0.001). Multivariable regression showed midconstruct HUs were predicted only by patient age (-2.6 HU/year; 95% CI, -3.4 to -1.9; P < 0.001) and time since original surgery (-1.4 HU/year; 95% CI, -2.6 to -0.2; P = 0.02). CONCLUSIONS: HUs were significantly decreased in the middle of previous long-segment fusion constructs, suggesting that multilevel fusion constructs lead to vertebral bone density loss within the construct, potentially from stress shielding.