Remediation strategies for mitigation of phthalate pollution: Challenges and future perspectives.

Phthalates are a group of emerging xenobiotic compounds commonly used as plasticizers. In recent times, there has been an increasing concern over the risk of phthalate exposure leading to adverse effects to human health and the environment. Therefore, it is necessary to not only understand the current status of phthalate pollution, their sources, exposure routes and health impacts, but also identify remediation technologies for mitigating phthalate pollution. Present review article aims to inform its readers about the ever increasing data on health burdens posed by phthalates and simultaneously highlights the recent advancements in research to alleviate phthalate contamination from environment. The article enumerates the major phthalates in use today, traces their environmental fate, addresses their growing health hazard concerns and largely focus on to provide an in-depth understanding of the different physical, chemical and biological treatment methods currently being used or under research for alleviating the risk of phthalate pollution, their challenges and the future research perspectives.

Assessment of methane emissions and energy recovery potential from the municipal solid waste landfills of Delhi, India.

Rising rate of MSW generation and unscientific disposal in the open dumping sites are responsible for emission of high concentrations of methane in developing countries. IPCC Default method (DM), First-order decay (FOD) and LandGEM were used to estimate methane emissions from the unengineered landfill sites of Delhi-Okhla, Bhalswa and Ghazipur between 1984 and 2015. During the period, the total CH4 emissions was found to be 1288.99, 311.18, 779.32 Gg from the 3 landfill sites of Delhi as predicted by DM, FOD and LandGEM respectively. The energy generation potential from methane for the year 2015 was found to vary from 4.16 × 108 to 9.86 × 108 MJ for Ghazipur, 2.08 × 108 to 4.06 × 108 MJ for Okhla and 3.42 × 108 to 8.11 × 108 MJ for Bhalswa. Efficient utilization of methane from the landfills as an energy source can be a sustainable waste management option.

Characterization of leaf waste based biochar for cost effective hydrogen sulphide removal from biogas.

Installation of decentralized units for biogas production along with indigenous upgradation systems can be an effective approach to meet growing energy demands of the rural population. Therefore, readily available leaf waste was used to prepare biochar at different temperatures and employed for H2S removal from biogas produced via anaerobic digestion plant. It is found that biochar prepared via carbonization of leaf waste at 400 °C effectively removes 84.2% H2S (from 1254 ppm to 201 ppm) from raw biogas for 25 min in a continuous adsorption tower. Subsequently, leaf waste biochar compositional, textural and morphological properties before and after H2S adsorption have been analyzed using proximate analysis, CHNS, BET surface area, FTIR, XRD, and SEM-EDX. It is found that BET surface area, pore size, and textural properties of leaf waste biochar plays a crucial role in H2S removal from the biogas.