Nanofibers of Polyaniline and Cu(II)-l-Aspartic Acid for a Room-Temperature Carbon Monoxide Gas Sensor.

In the present study, the carbon monoxide (CO) sensing property of Cu(II)-l-aspartic acid nanofibers/polyaniline (PANI) nanofibers composite was investigated at room temperature. The nanofiber composite was formed through the ultrasound mixing of emeraldine salt PANI nanofibers and Cu(II)-l-aspartic acid nanofibers, which were synthesized by using a polymerization process and simple self-assembly method, respectively. The nanofibers composite demonstrated a branched structure in which the Cu(II)-l-aspartic acid nanofiber framework is similar to the trunk of a tree and the polyaniline nanofibers is like its branches. It seems that this special structure and one-dimension/one-dimension interface are suitable for gas adsorption and sensing. The performance of the prepared sensor toward CO gas was investigated at room temperature in a wide concentration range (200-8000 ppm). The experimental results indicate that the incorporation of amino acid-based copper metal-biomolecule framework nanofibers to PANI nanofibers enhances the response value (12.41% to 4000 ppm), yielding good selectivity and acceptable response and recovery characteristics (220 s/240 s) at room temperature. The detection limit of Cu(II)-l-aspartic acid nanofibers/PANI nanofibers sensor for carbon monoxide is obtained at 120 ppm.

Non-enzymatic glucose sensor based on a g-C3N4/NiO/CuO nanocomposite.

In this paper, a non-enzymatic glucose sensor was developed based on a g-C3N4/NiO/CuO nanocomposite immobilized on a glassy carbon electrode (GCE). Field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) were utilized for the characterization of the synthesized g-C3N4/NiO/CuO nanocomposite. The electrocatalytic activity of the nanocomposite was investigated by cyclic voltammetry, and the amperometric technique was applied for monitoring glucose. The g-C3N4/NiO/CuO/GCE exhibited better electrocatalytic performance than g-C3N4/GCE, g-C3N4/CuO/GCE and g-C3N4/NiO/GCE. Under optimized conditions, the proposed sensor offered a linearity ranging from 0.4 µM to 8.5 mM with a detection limit of 0.1 µM and a sensitivity of 362.12 µA mM-1 cm-2. The constructed sensor displayed favorable reproducibility, outstanding selectivity, and long-term performance. These results reveal that the sensor is a promising candidate for blood glucose sensing.

Comprehensive facilitating of water oxidation reaction by ultrasonic attenuation of hydrogen-bonded structure of water.

The balance between water-metal interactions and water-water hydrogen bonding (HBs) controls the process of water adsorption on metallic surfaces. In other hand, the yield of oxygen evolution reaction (OER) is dependent on the binding energy of H2O at electrode surface. Therefore, on a specific metal substrate, attenuation of HBs may be a promising route for improving OER. In this study, the computational and experimental evidences indicate that the performance of ultrasonically irradiated deionized water (USI-DW), participated in water oxidation reaction (WOR), is different from its in the intact bulk water. To date, establishing of new electrocatalysts with lower overpotentials (η) and higher current densities (J) in OER have been mostly considered based on metals and oxide materials. Here, we ultrasonically agitated the water clusters formed by strong HBs, and as a sustainable improvement route explored its particular effects on the efficiency of OER. The molecular modeling (MM) of the (H2O)n clusters (n = 1-100 molecules), the corresponding IR spectra, the molecular orbitals energy levels and the adsorption of free and cluster confined H2O molecules on the Pt surface were studied by the appropriate quantum mechanical (QM) methods. The result of deconvolution of FTIR spectra recorded for USI-DW in the -OH stretching region (∼2600-3900 cm-1) properly confirmed the expected increase of the single water molecules. The reduction in overpotentials was 82 ±â€¯8 mV and 158 ±â€¯12 mV, to reach the J of 1 mA cm-1 at the typical pHs 12.2 and 13.1, respectively.

Synthesis, X-ray crystallography characterization, vibrational spectroscopic, molecular electrostatic potential maps, thermodynamic properties studies of N,N'-di(p-thiazole)formamidine.

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of N,N'-di(p-thiazole)formamidine (DpTF). DpTF has been synthesized and characterized by elemental analysis, FT-IR, FT-Raman, 1H NMR, 13C NMR spectroscopy and X-ray single crystal diffraction. The FT-IR and FT-Raman spectra of DpTF were recorded in the solid phase. The optimized geometry was calculated by HF and B3LYP methods using 6-31G(d) basis set. The FT-IR and FT-Raman spectra of DpTF was calculated at the HF/B3LYP/6-31G(d) level and were interpreted in terms of potential energy distribution (PED) analysis. The scaled theoretical wavenumber showed very good agreement with the experimental values. A detailed interpretation of the infrared and Raman spectra of DpTF was reported. On the basis of vibrational analyses, the thermodynamic properties of the title compound at different temperatures have been calculated, revealing the correlations between Cp,m°, Sm°, Hm° and temperatures. Furthermore, molecular electrostatic potential maps (MESP) and total dipole moment properties of the compound have been calculated.

Rapid and selective lead (II) colorimetric sensor based on azacrown ether-functionalized gold nanoparticles.

A gold nanoparticle (AuNPs)-based simple and fast colorimetric sensor for selective detecting of Pb(II) in aqueous solution has been developed. Monodisperse AuNPs (approx. 2.0 nm diameter) has been prepared facilely and further modified with an alkanethiol-bearing monoazacrown ether terminus. These AuNPs are shown to selectively sense Pb(2+) through color change, which is visually discernible by an appearance of the surface plasmon band (SPB) at 520 nm. The recognition mechanism is attributed to the unique structure of the monoazacrown ether attached to AuNPs and metal sandwich coordination between two azacrown ether moieties that are attached to separate nanoparticles. This inter-particle cross-linking results in an aggregation and apparent color change from brown to purple. Additionally, TEM experiments support the optical absorption data proving the aggregation between azacrown ether-capped gold nanoparticles. This AuNP-based colorimetric assay is a facile and robust method and allows fast detection of Pb(2+) at ambient temperatures. More importantly, the developed technique does not utilize enzymatic reactions, light-sensitive dye molecules, lengthy protocols or sophisticated instrumentation.

X-ray crystallography characterization, vibrational spectroscopy, NMR spectra and quantum chemical DFT/HF study of N,N'-di(2-methoxyphenyl)formamidine.

The title compound, N,N'-di(2-methoxyphenyl)formamidine (DMPF) was synthesized and characterized by FT-IR, FT-Raman, (1)H NMR, (13)C NMR spectroscopy and X-ray single crystal diffraction. The results show that the compound crystallizes in an orthorhombic system, with space group of Pbca and eight molecules in the unit cell. The unit cell parameters are: a=11.1118 (7)A, b=14.9878 (9)A and c=16.2851 (10)A. The molecular geometry, the normal mode frequencies and corresponding vibrational assignments of DMPF at the ground state were performed by HF and B3LYP methods with 6-311+G(d,p) basis set. It was observed that the bond lengths and angles in the molecule, obtained by X-ray at the level of theory, were in good agreement with those of the experiment. A detailed interpretation of the infrared and Raman spectra of DMPF was reported. The (13)C NMR and (1)H NMR of DMPF have been calculated using HF and B3LYP methods with 6-311+G(d,p) basis set. Comparison between experimental and theoretical results showed that B3LYP/6-311+G(d,p) method is able to provide more satisfactory results for predicting IR, Raman, (1)H NMR and (13)C NMR properties.

Reversed-phase high performance liquid chromatography (RP-HPLC) characteristics of some 9,10-anthraquinone derivatives using binary acetonitrile-water mixtures as mobile phase.

The retention behavior of 28 synthesized 9,10-anthraquinone derivatives in a reversed-phase (RP) high performance liquid chromatography (HPLC) system has been studied on a C18-RP column using acetonitrile-water mixtures as mobile phase. The influences of the composition of mobile phase and the solute structure on the retention times of 9,10-anthraquinone derivatives were investigated by linear solvation free energy relationship (LSFER) and quantitative structure-retention relationship (QSRR) analyses. Among different solvatochromic parameters of solvent systems, their polarity/polarizability parameter (pi*) was identified as the controlling factor affecting retention behavior of these compounds. A four-parametric QSRR model was obtained between solute structures and retention indices. Finally, a unified model containing both the molecular structure parameters and mobile phase properties was developed to describe the chromatographic behavior of the systems studied. The resulted QSRR models could explain and predict higher than 90% of variances in the retention indices. Among the solvent properties, polarity/polarizability parameter (pi*), and among the solute properties, HATS5v (leverage-weighted autocorrelation of lag 5/weighted by atomic van der Waals volumes, GETAWAY descriptors), Mor14p (3D-MoRSE-signal 14/weighted by atomic polarizabilities, 3D-MoRSE descriptors), GATS5p (Geary autocorrelation-lag 5/weighted by atomic polarizabilities, 2D autocorrelations) and R6u+(R maximal autocorrelation of lag 6/unweighted, GETAWAY descriptors) were identified as controlling factors in the RP-HPLC behavior of 9,10-anthraquinone derivatives in actonitrile-water binary solvents.

Sonochemical-assisted synthesis of nano-structured lead dioxide.

PbO(2) nano-powder was synthesized by the ultrasonic irradiation of an aqueous suspension of dispersed beta-PbO, as precursor, in the presence of ammonium peroxydisulfate as an oxidant. The reaction rate increased with an increase in temperature and ammonium peroxydisulfate concentration. In the presence of ammonium peroxydisulfate, the increased concentration of hydroxyl radical facilitated the oxidation of beta-PbO to PbO(2) under ultrasonic irradiation. The PbO(2) nano-powder was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). It was found that the applied ultrasonic wave determines the particle size. PbO(2) samples prepared under optimized experimental conditions have lead dioxide particles in the range of 50-100 nm, as shown by SEM. The XRD results reveal that only beta-PbO(2) is formed under optimum conditions. When the reaction mixture was stirred instead of ultrasonically irradiated, only a fraction of the lead oxide was converted to lead dioxide, and lead sulfate was the main reaction product.

Fibril formation of lysozyme upon interaction with sodium dodecyl sulfate at pH 9.2.

Fibril formation seems to be a general property of all proteins. Its occurrence in hen or human lysozyme depends on certain conditions, namely acidic pHs or the presence of some additives. This paper studies the interaction of lysozyme with sodium dodecyl sulfate (SDS) at pH 9.2, using UV-visible spectrophotometry, circular dichroism (CD) spectropolarimetry, electron microscopy (EM) and chemometry. Based on observations such as the strange increase in absorbance at 650nm (pH 9.2) and the presence of intermediates, it is assumed that lysozyme fibrils have been formed at pH 9.2 in the presence of SDS as an anionic surfactant. Thioflavin T emission fluorescence and an EM image confirmed this assumption. beta-cyclodextrin was then used as a turbidity inhibitor to establish its effect on the distribution of intermediates that participate in fibril formation.

Chemometric studies of lysozyme upon interaction with sodium dodecyl sulfate and beta-cyclodextrin.

The interaction of hen egg-white lysozyme with sodium n-dodecyl sulfate (SDS) as an anionic surfactant was investigated by UV-vis spectrophotometry at different pHs at 25 degrees C using HCl/glycine and NaOH/glycine for acidic and basic pH ranges, respectively. Analysis of the spectral data using chemometric method gave the evidence for the existence of intermediate components during the cited interaction. Results also indicated a connection between turbidity of the protein solution upon interaction with SDS and distribution of our newly found intermediates. As intermediates are important in aggregation of proteins, beta-cyclodextrin was employed as an anti-aggregation agent and the results obtained for the lysozyme-SDS-beta-cyclodextrin ternary system were compared with those obtained in the absence of beta-cyclodextrin on distribution and mole fraction of intermediates with. It is also shown that as the distribution of intermediates broadens in a range of SDS concentrations, the turbidity and aggregation state of solution are reduced.

Prediction of selectivity coefficients of a theophylline-selective electrode using MLR and ANN.

The selectivity coefficient of 24 interfering compounds (drugs, amino acids and organic compounds) of a theophylline-selective electrode was predicted using an artificial neural network (ANN). The multiple linear regression (MLR) technique was used to select the descriptors as inputs for the artificial neural network. The neural network employed here is a connected back-propagation model with a 2-2-1 architecture. Two topological indices for the interfering compounds, namely, Narumi harmonic topological index, HNar, and sum of topological distances between nitrogen and oxygen, T(Ncdots, three dots, centeredO), were taken as inputs for the ANN. Standard errors of training and prediction were 0.954 and 0.945, respectively, for the MLR model and 0.032 and 0.007, respectively, for the ANN model. Two topological indices for the interference of the electrode were taken as inputs for ANN.

A distinct intermediate of RNase A is induced by sodium dodecyl sulfate at its pK(a).

The chemical denaturation of RNase A was found to be mediated by sodium dodecyl sulfate (SDS) at various pH. The characterization of the unfolding pathway was investigated by spectrophotometry and differential scanning calorimetry (DSC), and was analyzed by multivariate curve resolution (MCR) as a chemometric method. The spectrophotometric titration curve of RNase A upon interaction with SDS indicated a distinct complex intermediate in glycine buffer at pH 3.3. This was accompanied with the catalytic activation of the enzyme and was concurrent with maximum population of the intermediate, determined by MCR. This was confirmed by the DSC profile of RNase A in the presence of SDS, indicated by two transitions in thermal unfolding. The kinetic data on the unfolding process of RNase A upon addition of SDS showed a two-phase pathway under the same conditions. The intermediate appeared at low pH especially at the pK(a) of SDS (pH 3.3). These results provide strong evidence of the influence of low pH (around the pK(a) of SDS) on the existence of an intermediate upon interaction of RNase A with SDS.

Direct determination of triamterene by potentiometry using a coated wire selective electrode.

A coated wire triamterene-selective electrode based on the incorporation of a triamterene-tetraphenylborate ion-pair in a poly(vinylchloride) coating membrane was constructed. The influence of membrane composition, temperature, pH of the test solution, and foreign ions on the electrode performance were investigated. The electrode showed a Nernstian response over a triamterene concentration range from 1.0 x 10(-6) to 3.5 x 10(-2) M, at 25 degrees C, and was found to be very selective, precise, and usable within the pH range 4.5-7.5. The standard electrode potentials, E degrees, were determined at 15, 20, 25, 30, 35, 40 and 45 degrees C and used to calculate the isothermal temperature coefficient (dE degrees /dt) of the electrode. Temperatures higher than 45 degrees C seriously affected the electrode performance. The electrode was successfully applied to the potentiometric determination of triamterene hydrochloride both in pure solutions and in pharmaceutical preparations.

First anionic 1,10-phenanthroline-2,9-dicarboxylate containing metal complex obtained from a novel 1:1 proton-transfer compound: synthesis, characterization, crystal structure, and solution studies.

The new 1,10-phenanthroline containing 1:1 proton-transfer compound LH(2), [pyda.H(2)](2+)[phendc](2-), was synthesized from the reaction of 2,6-pyridinediamine, pyda, and 1,10-phenanthroline-2,9-dicarboxylic acid, phendc.H(2), and characterized by elemental analysis, ES-Ms, IR, (1)H, (13)C NMR, and UV/vis spectroscopies. Subsequently, the first example of [phendc](2)(-) containing anionic complex [pyda.H](2)[Co(phendc)(2)].10H(2)O, was prepared, using the above novel proton-transfer compound, and structurally characterized by single-crystal X-ray diffraction. The complex crystallizes in the space group P2(1)/n of the monoclinic system with four molecules in a unit cell of dimensions a = 11.877(3) A, b = 31.473(9) A, c = 12.915(4) A, and beta = 116.223(5) degrees. The structure has been refined to a final value for the crystallographic R factor of 0.0524 based on 9021 observed independent reflections. The complexation reactions of pyda, phendc.H(2), and LH(2) with H(+) as well as LH(2) with Co(II) in aqueous solution were investigated by potentiometric pH titrations, and the equilibrium constants for all major complexes formed are described. The results are presented in the form of distribution diagrams revealing the concentrations of individual complex species as a function of pH. The results revealed that, at a pH range of 5.2-6.2, the major complex species is [(pyda.H)](2)[Co(phendc)(2)], similar to the isolated crystalline complex.

A PVC-based 1,8-diaminonaphthalen electrode for selective determination of vanadyl ion.

A PVC membrane vanadyl (VO(2+)) ion-selective electrode was constructed using 1,8-diaminonaphthalen (DAN) as a neutral carrier. The electrode shows good Nernstian response for VO(2+) ions over a wide concentration range (1.0x10(-1)-1.0x10(-5) M). The optimum composition of the membrane was 55 wt.% poly(vinylchloride), 35 wt.% 2-nitrophenyl octyl ether (NPOE), 5 wt.% ionophore, and 5 wt.% potassium tetrakis(p-chlorophenyl)borate (KTpClPB). It has relatively fast response time and can be used at least for 5 weeks without any considerable divergence in potentials. The proposed electrode revealed relatively good selectivity for VO(2+) over wide variety of other metal ions. The electrode was used for the potentiometric titration of VO(2+) ions with EDTA.

Cobalt(II)-selective membrane electrode based on a recently synthesized benzo-substituted macrocyclic diamide.

A PVC-membrane electrode based on a recently synthesized 18-membered macrocyclic diamide is presented. The electrode reveals a Nernstian potentiometric response for Co2+ over a wide concentration range (2.0 x 10(-6)-1.0 x 10(-2) M). The electrode has a response time of about 10 s and can be used for at least 2 months without any divergence. The proposed sensor revealed very good selectivities for Co2+ over a wide variety of other metal ions, and could be used over a wide pH range (3.0-8.0). The detection limit of the sensor is 6.0 x 10(-7) M. It was successfully applied to the direct determination and potentiometric titration of cobalt ion.

Lead-selective membrane potentiometric sensor based on an 18-membered thiacrown derivative.

A PVC-based membrane electrode for lead ions based on hexathia-18-crown-6-tetraone as membrane carrier was prepared. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The electrode showed a Nernstian response over a lead concentration range from 1.0 x 10(-6) to 8.0 x 10(-3) M at 25 degrees C, and was found to be very selective, precise and usable within the pH range 3.0-6.0. The electrode was successfully used as an indicator electrode in potentiometric titration of lead ions and in direct determination of lead in water samples.

Highly selective thiocyanate poly(vinyl chloride) membrane electrode based on a cadmium-Schiff's base complex.

A PVC membrane electrode based on a cadmium-salen (N,N'-bis-salicylidene-1,2-ethylenediamine) complex as an anion carrier is described. The electrode has an anti-Hofmeister selectivity sequence with a preference for thiocyanate at pH 1.5-11.0. It has a linear response to thiocyanate from 1.0 x 10(-6) to 1.0 x 10(-1) mol L(-1) with a slope of 59.1 +/- 0.2 mV per decade, and a detection limit of 7 x 10(-7) mol L(-1). This electrode has high selectivity for thiocyanate relative to many common organic and inorganic anions. The proposed sensor has a fast response time of approximately 15 s. It was applied to the determination of thiocyanate in a milk sample.

A Schiff base complex of Zn(II) as a neutral carrier for highly selective PVC membrane sensors for the sulfate ion.

Novel polymeric membrane (PME) and coated graphite (CGE) sulfate-selective electrodes based on a recently synthesized Schiff base complex of Zn(II) were prepared. The electrodes reveal a Nernstian behavior over wide SO4(2-) ion concentration ranges (5.0 x 10(-5)-1.0 x 10(-1) M for PME and 1.0 x 10(-7)-1.0 x 10(-1) M for CGE) and very low detection limits (2.8 x 10(-5) M for PME and 8.5 x 10(-8) M for CGE). The potentiometric response is independent of the pH of the solution in the pH range 3.0-7.0. The electrodes manifest advantages of low resistance, very fast response, and, most importantly, good selectivities relative to a wide variety of other anions. In fact, the selectivity behavior of the proposed SO4(2) ion-selective electrodes shows a great improvement compared to the previously reported electrodes for sulfate ion. The electrodes can be used for at least 3 months without any appreciable divergence in potentials. The electrodes were used as an indicator electrode in the potentiometric titration of sulfate and barium ions and in the determination of iron in ferrous sulfate tablets.